• Paul Cercueil's avatar
    drm/ingenic: Add support for the IPU · fc1acf31
    Paul Cercueil authored
    Add support for the Image Processing Unit (IPU) found in all Ingenic
    SoCs.
    
    The IPU can upscale and downscale a source frame of arbitrary size
    ranging from 4x4 to 4096x4096 on newer SoCs, with bicubic filtering
    on newer SoCs, bilinear filtering on older SoCs. Nearest-neighbour can
    also be obtained with proper coefficients.
    
    Starting from the JZ4725B, the IPU supports a mode where its output is
    sent directly to the LCDC, without having to be written to RAM first.
    This makes it possible to use the IPU as a DRM plane on the compatible
    SoCs, and have it convert and scale anything the userspace asks for to
    what's available for the display.
    
    Regarding pixel formats, older SoCs support packed YUV 4:2:2 and various
    planar YUV formats. Newer SoCs introduced support for RGB.
    
    Since the IPU is a separate hardware block, to make it work properly the
    Ingenic DRM driver will now register itself as a component master in
    case the IPU driver has been enabled in the config.
    
    When enabled in the config, the CRTC will see the IPU as a second primary
    plane. It cannot be enabled at the same time as the regular primary
    plane. It has the same priority, which means that it will also display
    below the overlay plane.
    
    v2: - ingenic-ipu is no longer its own module. It will be built
          into the ingenic-drm module.
        - If enabled in the config, both the core driver and the IPU
          driver will register as components; otherwise the core
          driver will bypass that and call the ingenic_drm_bind()
          function directly.
        - Since both files now build into the same module, the
          symbols previously exported as GPL are not exported anymore,
          since they are only used internally.
        - Fix SPDX license header in ingenic-ipu.h
        - Avoid using 'for(;;);' loops without trailing statement(s)
    
    v3: - Pass priv structure to IRQ handler; that way we don't hardcode
          the expectation that the IPU plane is at index #0.
        - Rework osd_changed() to account for src_* changes
        - Add multiplanar YUV 4:4:4 support
        - Commit fb addresses to HW at vblank, since addr registers are
          not shadow registers
        - Probe IPU component later so that IPU plane is last
        - Fix driver not working on IPU-less hardware
        - Use IPU driver's name as the IRQ name to avoid having two
          'ingenic-drm' in /proc/interrupts
        - Fix IPU only working for still images on JZ4725B
        - Add a bit more code comments
    Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
    Reviewed-by: default avatarSam Ravnborg <sam@ravnborg.org>
    Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-10-paul@crapouillou.net
    fc1acf31
ingenic-drm-drv.c 27.5 KB