Commit 01237139 authored by Carolyn Wyborny's avatar Carolyn Wyborny Committed by David S. Miller

igb: Update link modes display in ethtool

This patch fixes multiple problems in the link modes display in ethtool.
Newer parts have more complicated methods to determine actual link
capabilities.  Older parts cannot communicate with their SFP modules.
Finally, all the available defines are not displayed by ethtool.  This
updates the link modes to be as accurate as possible depending on what data
is available to the driver at any given time.
Signed-off-by: default avatarCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: default avatarJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6aafeef0
......@@ -146,6 +146,7 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags;
u32 status;
status = rd32(E1000_STATUS);
if (hw->phy.media_type == e1000_media_type_copper) {
ecmd->supported = (SUPPORTED_10baseT_Half |
......@@ -169,13 +170,22 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ecmd->transceiver = XCVR_INTERNAL;
} else {
ecmd->supported = (SUPPORTED_FIBRE |
SUPPORTED_1000baseKX_Full |
SUPPORTED_Autoneg |
SUPPORTED_Pause);
ecmd->advertising = ADVERTISED_FIBRE;
if ((eth_flags->e1000_base_lx) || (eth_flags->e1000_base_sx)) {
ecmd->supported |= SUPPORTED_1000baseT_Full;
ecmd->advertising |= ADVERTISED_1000baseT_Full;
ecmd->advertising = (ADVERTISED_FIBRE |
ADVERTISED_1000baseKX_Full);
if (hw->mac.type == e1000_i354) {
if ((hw->device_id ==
E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) &&
!(status & E1000_STATUS_2P5_SKU_OVER)) {
ecmd->supported |= SUPPORTED_2500baseX_Full;
ecmd->supported &=
~SUPPORTED_1000baseKX_Full;
ecmd->advertising |= ADVERTISED_2500baseX_Full;
ecmd->advertising &=
~ADVERTISED_1000baseKX_Full;
}
}
if (eth_flags->e100_base_fx) {
ecmd->supported |= SUPPORTED_100baseT_Full;
......@@ -187,35 +197,29 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
}
if (hw->mac.autoneg != 1)
ecmd->advertising &= ~(ADVERTISED_Pause |
ADVERTISED_Asym_Pause);
if (hw->fc.requested_mode == e1000_fc_full)
switch (hw->fc.requested_mode) {
case e1000_fc_full:
ecmd->advertising |= ADVERTISED_Pause;
else if (hw->fc.requested_mode == e1000_fc_rx_pause)
break;
case e1000_fc_rx_pause:
ecmd->advertising |= (ADVERTISED_Pause |
ADVERTISED_Asym_Pause);
else if (hw->fc.requested_mode == e1000_fc_tx_pause)
break;
case e1000_fc_tx_pause:
ecmd->advertising |= ADVERTISED_Asym_Pause;
else
break;
default:
ecmd->advertising &= ~(ADVERTISED_Pause |
ADVERTISED_Asym_Pause);
status = rd32(E1000_STATUS);
}
if (status & E1000_STATUS_LU) {
if (hw->mac.type == e1000_i354) {
if ((status & E1000_STATUS_2P5_SKU) &&
!(status & E1000_STATUS_2P5_SKU_OVER)) {
ecmd->supported = SUPPORTED_2500baseX_Full;
ecmd->advertising = ADVERTISED_2500baseX_Full;
ecmd->speed = SPEED_2500;
} else {
ecmd->supported = SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_1000baseT_Full;
}
if ((status & E1000_STATUS_2P5_SKU) &&
!(status & E1000_STATUS_2P5_SKU_OVER)) {
ecmd->speed = SPEED_2500;
} else if (status & E1000_STATUS_SPEED_1000) {
ecmd->speed = SPEED_1000;
} else if (status & E1000_STATUS_SPEED_100) {
......@@ -232,7 +236,6 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ecmd->speed = -1;
ecmd->duplex = -1;
}
if ((hw->phy.media_type == e1000_media_type_fiber) ||
hw->mac.autoneg)
ecmd->autoneg = AUTONEG_ENABLE;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment