rsi: Register interrupt handler before firmware load

Before firmware load, sometimes false interrupts are received.
System hang is observed if interrupt handler is not registered
to receive these interrupts. Hence interrupt handler registration
is moved before firmware load. We will drop these false interrupts
as these are not from the device.
Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/rsi/rsi_91x_hal.c

@@ -733,6 +733,7 @@ int rsi_hal_device_init(struct rsi_hw *adapter)
 	default:
 		return -EINVAL;
 	}
+	common->fsm_state = FSM_CARD_NOT_READY;
 
 	return 0;
 }

drivers/net/wireless/rsi/rsi_91x_sdio.c

@@ -139,6 +139,8 @@ static void rsi_handle_interrupt(struct sdio_func *function)
 {
 	struct rsi_hw *adapter = sdio_get_drvdata(function);
 
+	if (adapter->priv->fsm_state == FSM_FW_NOT_LOADED)
+		return;
 	sdio_release_host(function);
 	rsi_interrupt_handler(adapter);
 	sdio_claim_host(function);
@@ -908,10 +910,19 @@ static int rsi_probe(struct sdio_func *pfunction,
 			__func__);
 		goto fail;
 	}
+	sdio_claim_host(pfunction);
+	if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__);
+		sdio_release_host(pfunction);
+		goto fail;
+	}
+	sdio_release_host(pfunction);
+	rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__);
 
 	if (rsi_hal_device_init(adapter)) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__);
 		sdio_claim_host(pfunction);
+		sdio_release_irq(pfunction);
 		sdio_disable_func(pfunction);
 		sdio_release_host(pfunction);
 		goto fail;
@@ -923,16 +934,6 @@ static int rsi_probe(struct sdio_func *pfunction,
 		return -EIO;
 	}
 
-	sdio_claim_host(pfunction);
-	if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) {
-		rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__);
-		sdio_release_host(pfunction);
-		goto fail;
-	}
-
-	sdio_release_host(pfunction);
-	rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__);
-
 	return 0;
 fail:
 	rsi_91x_deinit(adapter);

drivers/net/wireless/rsi/rsi_main.h

@@ -32,6 +32,7 @@
 #define ISR_ZONE                        BIT(8)  /* For Interrupt Msgs         */
 
 enum RSI_FSM_STATES {
+	FSM_FW_NOT_LOADED,
 	FSM_CARD_NOT_READY,
 	FSM_BOOT_PARAMS_SENT,
 	FSM_EEPROM_READ_MAC_ADDR,