Commit 0224d45c authored by Hans de Goede's avatar Hans de Goede Committed by Wolfram Sang

i2c-cht-wc: Add device-properties for fusb302 integration

Add device-properties to make the bq24292i charger connected to
the bus get its input-current-limit from the fusb302 Type-C port
controller which is used on boards with the cht-wc PMIC,
as well as regulator_init_data for the 5V boost converter on
the bq24292i.

Since this means we now hook-up the bq24292i to the fusb302 Type-C port
controller add a check for the ACPI device which instantiates the fusb302.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 728fe6ce
......@@ -198,6 +198,11 @@ config I2C_CHT_WC
SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
found on some Intel Cherry Trail systems.
Note this controller is hooked up to a TI bq24292i charger-IC,
combined with a FUSB302 Type-C port-controller as such it is advised
to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
(the fusb302 driver currently is in drivers/staging).
config I2C_NFORCE2
tristate "Nvidia nForce2, nForce3 and nForce4"
depends on PCI
......
......@@ -16,6 +16,7 @@
* GNU General Public License for more details.
*/
#include <linux/acpi.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/i2c.h>
......@@ -25,6 +26,7 @@
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/power/bq24190_charger.h>
#include <linux/slab.h>
#define CHT_WC_I2C_CTRL 0x5e24
......@@ -232,13 +234,35 @@ static const struct irq_chip cht_wc_i2c_irq_chip = {
.name = "cht_wc_ext_chrg_irq_chip",
};
static const char * const bq24190_suppliers[] = { "fusb302-typec-source" };
static const struct property_entry bq24190_props[] = {
PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"),
PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers),
PROPERTY_ENTRY_BOOL("omit-battery-class"),
PROPERTY_ENTRY_BOOL("disable-reset"),
{ }
};
static struct regulator_consumer_supply fusb302_consumer = {
.supply = "vbus",
/* Must match fusb302 dev_name in intel_cht_int33fe.c */
.dev_name = "i2c-fusb302",
};
static const struct regulator_init_data bq24190_vbus_init_data = {
.constraints = {
/* The name is used in intel_cht_int33fe.c do not change. */
.name = "cht_wc_usb_typec_vbus",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.consumer_supplies = &fusb302_consumer,
.num_consumer_supplies = 1,
};
static struct bq24190_platform_data bq24190_pdata = {
.regulator_init_data = &bq24190_vbus_init_data,
};
static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
......@@ -246,7 +270,9 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
struct i2c_board_info board_info = {
.type = "bq24190",
.addr = 0x6b,
.dev_name = "bq24190",
.properties = bq24190_props,
.platform_data = &bq24190_pdata,
};
int ret, reg, irq;
......@@ -314,11 +340,21 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
if (ret)
goto remove_irq_domain;
board_info.irq = adap->client_irq;
adap->client = i2c_new_device(&adap->adapter, &board_info);
if (!adap->client) {
ret = -ENOMEM;
goto del_adapter;
/*
* Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger,
* connected to this i2c bus, and a max17047 fuel-gauge and a fusb302
* USB Type-C controller connected to another i2c bus. In this setup
* the max17047 and fusb302 devices are enumerated through an INT33FE
* ACPI device. If this device is present register an i2c-client for
* the TI bq24292i charger.
*/
if (acpi_dev_present("INT33FE", NULL, -1)) {
board_info.irq = adap->client_irq;
adap->client = i2c_new_device(&adap->adapter, &board_info);
if (!adap->client) {
ret = -ENOMEM;
goto del_adapter;
}
}
platform_set_drvdata(pdev, adap);
......@@ -335,7 +371,8 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
{
struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
i2c_unregister_device(adap->client);
if (adap->client)
i2c_unregister_device(adap->client);
i2c_del_adapter(&adap->adapter);
irq_domain_remove(adap->irq_domain);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment