clockevents/driversi/mps2: add MPS2 Timer driver

MPS2 platform has simple 32 bits general purpose countdown timers.

The driver uses the first detected timer as a clocksource and the rest
of the timers as a clockevent
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

drivers/clocksource/Kconfig

@@ -186,6 +186,12 @@ config CLKSRC_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
 	select CLKSRC_MMIO
 
+config CLKSRC_MPS2
+	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
+	depends on GENERIC_SCHED_CLOCK
+	select CLKSRC_MMIO
+	select CLKSRC_OF
+
 config ARM_ARCH_TIMER
 	bool
 	select CLKSRC_OF if OF

drivers/clocksource/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_CLKSRC_EFM32)	+= time-efm32.o
 obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 obj-$(CONFIG_CLKSRC_LPC32XX)	+= time-lpc32xx.o
+obj-$(CONFIG_CLKSRC_MPS2)	+= mps2-timer.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
 obj-$(CONFIG_FSL_FTM_TIMER)	+= fsl_ftm_timer.o
 obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o

drivers/clocksource/mps2-timer.c

+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#define TIMER_CTRL		0x0
+#define TIMER_CTRL_ENABLE	BIT(0)
+#define TIMER_CTRL_IE		BIT(3)
+
+#define TIMER_VALUE		0x4
+#define TIMER_RELOAD		0x8
+#define TIMER_INT		0xc
+
+struct clockevent_mps2 {
+	void __iomem *reg;
+	u32 clock_count_per_tick;
+	struct clock_event_device clkevt;
+};
+
+static void __iomem *sched_clock_base;
+
+static u64 notrace mps2_sched_read(void)
+{
+	return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
+}
+
+static inline struct clockevent_mps2 *to_mps2_clkevt(struct clock_event_device *c)
+{
+	return container_of(c, struct clockevent_mps2, clkevt);
+}
+
+static void clockevent_mps2_writel(u32 val, struct clock_event_device *c, u32 offset)
+{
+	writel_relaxed(val, to_mps2_clkevt(c)->reg + offset);
+}
+
+static int mps2_timer_shutdown(struct clock_event_device *ce)
+{
+	clockevent_mps2_writel(0, ce, TIMER_RELOAD);
+	clockevent_mps2_writel(0, ce, TIMER_CTRL);
+
+	return 0;
+}
+
+static int mps2_timer_set_next_event(unsigned long next, struct clock_event_device *ce)
+{
+	clockevent_mps2_writel(next, ce, TIMER_VALUE);
+	clockevent_mps2_writel(TIMER_CTRL_IE | TIMER_CTRL_ENABLE, ce, TIMER_CTRL);
+
+	return 0;
+}
+
+static int mps2_timer_set_periodic(struct clock_event_device *ce)
+{
+	u32 clock_count_per_tick = to_mps2_clkevt(ce)->clock_count_per_tick;
+
+	clockevent_mps2_writel(clock_count_per_tick, ce, TIMER_RELOAD);
+	clockevent_mps2_writel(clock_count_per_tick, ce, TIMER_VALUE);
+	clockevent_mps2_writel(TIMER_CTRL_IE | TIMER_CTRL_ENABLE, ce, TIMER_CTRL);
+
+	return 0;
+}
+
+static irqreturn_t mps2_timer_interrupt(int irq, void *dev_id)
+{
+	struct clockevent_mps2 *ce = dev_id;
+	u32 status = readl_relaxed(ce->reg + TIMER_INT);
+
+	if (!status) {
+		pr_warn("spurious interrupt\n");
+		return IRQ_NONE;
+	}
+
+	writel_relaxed(1, ce->reg + TIMER_INT);
+
+	ce->clkevt.event_handler(&ce->clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init mps2_clockevent_init(struct device_node *np)
+{
+	void __iomem *base;
+	struct clk *clk = NULL;
+	struct clockevent_mps2 *ce;
+	u32 rate;
+	int irq, ret;
+	const char *name = "mps2-clkevt";
+
+	ret = of_property_read_u32(np, "clock-frequency", &rate);
+	if (ret) {
+		clk = of_clk_get(np, 0);
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
+			pr_err("failed to get clock for clockevent: %d\n", ret);
+			goto out;
+		}
+
+		ret = clk_prepare_enable(clk);
+		if (ret) {
+			pr_err("failed to enable clock for clockevent: %d\n", ret);
+			goto out_clk_put;
+		}
+
+		rate = clk_get_rate(clk);
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		ret = -EADDRNOTAVAIL;
+		pr_err("failed to map register for clockevent: %d\n", ret);
+		goto out_clk_disable;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		ret = -ENOENT;
+		pr_err("failed to get irq for clockevent: %d\n", ret);
+		goto out_iounmap;
+	}
+
+	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+	if (!ce) {
+		ret = -ENOMEM;
+		goto out_iounmap;
+	}
+
+	ce->reg = base;
+	ce->clock_count_per_tick = DIV_ROUND_CLOSEST(rate, HZ);
+	ce->clkevt.irq = irq;
+	ce->clkevt.name = name;
+	ce->clkevt.rating = 200;
+	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	ce->clkevt.cpumask = cpu_possible_mask;
+	ce->clkevt.set_state_shutdown	= mps2_timer_shutdown,
+	ce->clkevt.set_state_periodic	= mps2_timer_set_periodic,
+	ce->clkevt.set_state_oneshot	= mps2_timer_shutdown,
+	ce->clkevt.set_next_event	= mps2_timer_set_next_event;
+
+	/* Ensure timer is disabled */
+	writel_relaxed(0, base + TIMER_CTRL);
+
+	ret = request_irq(irq, mps2_timer_interrupt, IRQF_TIMER, name, ce);
+	if (ret) {
+		pr_err("failed to request irq for clockevent: %d\n", ret);
+		goto out_kfree;
+	}
+
+	clockevents_config_and_register(&ce->clkevt, rate, 0xf, 0xffffffff);
+
+	return 0;
+
+out_kfree:
+	kfree(ce);
+out_iounmap:
+	iounmap(base);
+out_clk_disable:
+	/* clk_{disable, unprepare, put}() can handle NULL as a parameter */
+	clk_disable_unprepare(clk);
+out_clk_put:
+	clk_put(clk);
+out:
+	return ret;
+}
+
+static int __init mps2_clocksource_init(struct device_node *np)
+{
+	void __iomem *base;
+	struct clk *clk = NULL;
+	u32 rate;
+	int ret;
+	const char *name = "mps2-clksrc";
+
+	ret = of_property_read_u32(np, "clock-frequency", &rate);
+	if (ret) {
+		clk = of_clk_get(np, 0);
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
+			pr_err("failed to get clock for clocksource: %d\n", ret);
+			goto out;
+		}
+
+		ret = clk_prepare_enable(clk);
+		if (ret) {
+			pr_err("failed to enable clock for clocksource: %d\n", ret);
+			goto out_clk_put;
+		}
+
+		rate = clk_get_rate(clk);
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		ret = -EADDRNOTAVAIL;
+		pr_err("failed to map register for clocksource: %d\n", ret);
+		goto out_clk_disable;
+	}
+
+	/* Ensure timer is disabled */
+	writel_relaxed(0, base + TIMER_CTRL);
+
+	/* ... and set it up as free-running clocksource */
+	writel_relaxed(0xffffffff, base + TIMER_VALUE);
+	writel_relaxed(0xffffffff, base + TIMER_RELOAD);
+
+	writel_relaxed(TIMER_CTRL_ENABLE, base + TIMER_CTRL);
+
+	ret = clocksource_mmio_init(base + TIMER_VALUE, name,
+				    rate, 200, 32,
+				    clocksource_mmio_readl_down);
+	if (ret) {
+		pr_err("failed to init clocksource: %d\n", ret);
+		goto out_iounmap;
+	}
+
+	sched_clock_base = base;
+	sched_clock_register(mps2_sched_read, 32, rate);
+
+	return 0;
+
+out_iounmap:
+	iounmap(base);
+out_clk_disable:
+	/* clk_{disable, unprepare, put}() can handle NULL as a parameter */
+	clk_disable_unprepare(clk);
+out_clk_put:
+	clk_put(clk);
+out:
+	return ret;
+}
+
+static void __init mps2_timer_init(struct device_node *np)
+{
+	static int has_clocksource, has_clockevent;
+	int ret;
+
+	if (!has_clocksource) {
+		ret = mps2_clocksource_init(np);
+		if (!ret) {
+			has_clocksource = 1;
+			return;
+		}
+	}
+
+	if (!has_clockevent) {
+		ret = mps2_clockevent_init(np);
+		if (!ret) {
+			has_clockevent = 1;
+			return;
+		}
+	}
+}
+
+CLOCKSOURCE_OF_DECLARE(mps2_timer, "arm,mps2-timer", mps2_timer_init);