Skip to content

L
linux
Commit 037bd2fd authored by Tom Rini's avatar Tom Rini Committed by Paul Mackerras
Browse files
Options

PPC32: Boot wrapper updates. 

The major changes here are:

(1) Combine the pmac and chrp directories into a single
`openfirmware' directory, since both use Open Firmware and the code
was very similar.

(2) Move the Open Firmware interfaces out to a `of1275' directory
and put them in separate files so we only include the ones we need.
This work is due to Leigh Brown.

(3) On PReP and embedded, get the memory size from the memory
controller.  Don't try to ask Open Firmware even on PRePs which
have it.
parent 8c6c406e
Hide whitespace changes
Inline Side-by-side
Showing with 1277 additions and 577 deletions
arch/ppc/boot/Makefile
View file @ 037bd2fd
...@@ -28,7 +28,7 @@ images/vmlinux.gz: $(TOPDIR)/vmlinux ...@@ -28,7 +28,7 @@ images/vmlinux.gz: $(TOPDIR)/vmlinux
# Subdirs and tools needed for each. Assume we always need to go into # Subdirs and tools needed for each. Assume we always need to go into
# 'simple' unless told otherwise. # 'simple' unless told otherwise.
subdir-y := lib common simple subdir-y := lib common simple
subdir-$(CONFIG_ALL_PPC) := chrp pmac prep subdir-$(CONFIG_ALL_PPC) := openfirmware prep
tools-$(CONFIG_ALL_PPC) := addnote mknote hack-coff mkprep tools-$(CONFIG_ALL_PPC) := addnote mknote hack-coff mkprep
tools-$(CONFIG_PPLUS) := mkbugboot mkprep tools-$(CONFIG_PPLUS) := mkbugboot mkprep
tools-$(CONFIG_4xx) := mktree tools-$(CONFIG_4xx) := mktree
...@@ -47,6 +47,9 @@ NONBOOT := lib common ...@@ -47,6 +47,9 @@ NONBOOT := lib common
# These are the subdirs we want to use # These are the subdirs we want to use
BOOTDIRS = $(filter-out $(NONBOOT), $(subdir-y)) BOOTDIRS = $(filter-out $(NONBOOT), $(subdir-y))
makeof1275:
$(MAKE) -C of1275
# This will make the tools we need. We do it like this to ensure that we use # This will make the tools we need. We do it like this to ensure that we use
# HOSTCC. -- Tom # HOSTCC. -- Tom
maketools: maketools:
...@@ -55,7 +58,7 @@ maketools: ...@@ -55,7 +58,7 @@ maketools:
# The targets all boards support for boot images. # The targets all boards support for boot images.
BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd
$(BOOT_TARGETS): vmapus lib/zlib.a images/vmlinux.gz maketools $(BOOT_TARGETS): vmapus lib/zlib.a images/vmlinux.gz makeof1275 maketools
ifneq ($(BOOTDIRS),) ifneq ($(BOOTDIRS),)
for d in $(BOOTDIRS); do $(MAKE) -C $$d $@; done for d in $(BOOTDIRS); do $(MAKE) -C $$d $@; done
endif endif
...@@ -80,5 +83,6 @@ vmlinux.sm: $(TOPDIR)/vmlinux utils/addSystemMap ...@@ -80,5 +83,6 @@ vmlinux.sm: $(TOPDIR)/vmlinux utils/addSystemMap
clean: clean:
$(MAKE) -C images clean $(MAKE) -C images clean
$(MAKE) -C utils clean $(MAKE) -C utils clean
$(MAKE) -C openfirmware clean
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
arch/ppc/boot/chrp/Makefile deleted 100644 → 0
View file @ 8c6c406e
# Makefile for making ELF bootable images for booting on CHRP
# using Open Firmware.
#
# Geert Uytterhoeven September 1997
#
# Based on coffboot by Paul Mackerras
LD_ARGS = -T ../ld.script -Ttext 0x00400000
OBJS = ../common/crt0.o start.o main.o misc.o ../common/string.o image.o \
../common/ofcommon.o
EXTRA_TARGETS := $(OBJS)
LIBS = $(TOPDIR)/lib/lib.a ../lib/zlib.a
# Utils
ADDNOTE = ../utils/addnote
PIGGYBACK = ../utils/piggyback
ifeq ($(CONFIG_PPC64BRIDGE),y)
END += .64
AFLAGS += -Wa,-mppc64bridge
endif
ifeq ($(CONFIG_SMP),y)
END += .smp
endif
TFTPIMAGE=/tftpboot/zImage.chrp$(END)
all: zImage
znetboot: zImage
cp -f $(TOPDIR)/vmlinux /tftpboot/vmlinux$(END)
cp ../images/zImage.chrp $(TFTPIMAGE)
znetboot.initrd: zImage.initrd
cp ../images/zImage.initrd.chrp $(TFTPIMAGE)
floppy: zImage
mcopy zImage a:zImage
image.o: ../images/vmlinux.gz ../common/dummy.o
$(OBJCOPY) ../common/dummy.o $@ \
--add-section=.image=../images/vmlinux.gz \
--set-section-flags=.image=contents,alloc,load,readonly,data
ifdef CONFIG_XMON
$(OBJCOPY) $@ $@ \
--add-section=.sysmap=$(TOPDIR)/System.map \
--set-section-flags=.sysmap=contents,alloc,load,readonly,data
endif
zImage: $(OBJS) $(LIBS) $(ADDNOTE)
$(LD) $(LD_ARGS) -o ../images/$@.chrp $(OBJS) $(LIBS)
$(OBJCOPY) ../images/$@.chrp ../images/$@.chrp -R .comment -R .ramdisk
cp ../images/$@.chrp ../images/$@.chrp-rs6k
$(ADDNOTE) ../images/$@.chrp-rs6k
zImage.initrd: $(OBJS) $(LIBS) $(ADDNOTE) ../images/ramdisk.image.gz
$(OBJCOPY) image.o image.o \
--add-section=.ramdisk=../images/ramdisk.image.gz \
--set-section-flags=.ramdisk=contents,alloc,load,readonly,data
$(LD) $(LD_ARGS) -o ../images/$@.chrp $(OBJS) $(LIBS)
$(OBJCOPY) ../images/$@.chrp ../images/$@.chrp -R .comment
cp ../images/$@.chrp ../images/$@.chrp-rs6k
$(ADDNOTE) ../images/$@.chrp-rs6k
include $(TOPDIR)/Rules.make
arch/ppc/boot/chrp/start.c deleted 100644 → 0
View file @ 8c6c406e
/*
* Copyright (C) Paul Mackerras 1997.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <stdarg.h>
int (*prom)(void *args);
void *chosen_handle;
void *stdin;
void *stdout;
void *stderr;
void exit(void);
void *finddevice(const char *name);
int getprop(void *phandle, const char *name, void *buf, int buflen);
void printk(char *fmt, ...);
extern void chrpboot(int a1, int a2, void *prom);
extern int strlen(const char *s);
void
start(int a1, int a2, void *promptr)
{
prom = promptr;
chosen_handle = finddevice("/chosen");
if (chosen_handle == (void *) -1)
exit();
if (getprop(chosen_handle, "stdout", &stdout, sizeof(stdout)) != 4)
exit();
stderr = stdout;
if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4)
exit();
chrpboot(a1, a2, promptr);
for (;;)
exit();
}
int
write(void *handle, void *ptr, int nb)
{
struct prom_args {
char *service;
int nargs;
int nret;
void *ihandle;
void *addr;
int len;
int actual;
} args;
args.service = "write";
args.nargs = 3;
args.nret = 1;
args.ihandle = handle;
args.addr = ptr;
args.len = nb;
args.actual = -1;
prom(&args);
return args.actual;
}
int
read(void *handle, void *ptr, int nb)
{
struct prom_args {
char *service;
int nargs;
int nret;
void *ihandle;
void *addr;
int len;
int actual;
} args;
args.service = "read";
args.nargs = 3;
args.nret = 1;
args.ihandle = handle;
args.addr = ptr;
args.len = nb;
args.actual = -1;
(*prom)(&args);
return args.actual;
}
void
exit(void)
{
struct prom_args {
char *service;
} args;
for (;;) {
args.service = "exit";
(*prom)(&args);
}
}
void
pause(void)
{
struct prom_args {
char *service;
} args;
args.service = "enter";
(*prom)(&args);
}
void *
finddevice(const char *name)
{
struct prom_args {
char *service;
int nargs;
int nret;
const char *devspec;
void *phandle;
} args;
args.service = "finddevice";
args.nargs = 1;
args.nret = 1;
args.devspec = name;
args.phandle = (void *) -1;
(*prom)(&args);
return args.phandle;
}
void *
claim(unsigned int virt, unsigned int size, unsigned int align)
{
struct prom_args {
char *service;
int nargs;
int nret;
unsigned int virt;
unsigned int size;
unsigned int align;
void *ret;
} args;
args.service = "claim";
args.nargs = 3;
args.nret = 1;
args.virt = virt;
args.size = size;
args.align = align;
(*prom)(&args);
return args.ret;
}
int
getprop(void *phandle, const char *name, void *buf, int buflen)
{
struct prom_args {
char *service;
int nargs;
int nret;
void *phandle;
const char *name;
void *buf;
int buflen;
int size;
} args;
args.service = "getprop";
args.nargs = 4;
args.nret = 1;
args.phandle = phandle;
args.name = name;
args.buf = buf;
args.buflen = buflen;
args.size = -1;
(*prom)(&args);
return args.size;
}
int
putc(int c, void *f)
{
char ch = c;
if (c == '\n')
putc('\r', f);
return write(f, &ch, 1) == 1? c: -1;
}
int
putchar(int c)
{
return putc(c, stdout);
}
int
fputs(char *str, void *f)
{
int n = strlen(str);
return write(f, str, n) == n? 0: -1;
}
int
readchar(void)
{
char ch;
for (;;) {
switch (read(stdin, &ch, 1)) {
case 1:
return ch;
case -1:
printk("read(stdin) returned -1\r\n");
return -1;
}
}
}
static char line[256];
static char *lineptr;
static int lineleft;
int
getchar(void)
{
int c;
if (lineleft == 0) {
lineptr = line;
for (;;) {
c = readchar();
if (c == -1 || c == 4)
break;
if (c == '\r' || c == '\n') {
*lineptr++ = '\n';
putchar('\n');
break;
}
switch (c) {
case 0177:
case '\b':
if (lineptr > line) {
putchar('\b');
putchar(' ');
putchar('\b');
--lineptr;
}
break;
case 'U' & 0x1F:
while (lineptr > line) {
putchar('\b');
putchar(' ');
putchar('\b');
--lineptr;
}
break;
default:
if (lineptr >= &line[sizeof(line) - 1])
putchar('\a');
else {
putchar(c);
*lineptr++ = c;
}
}
}
lineleft = lineptr - line;
lineptr = line;
}
if (lineleft == 0)
return -1;
--lineleft;
return *lineptr++;
}
extern int vsprintf(char *buf, const char *fmt, va_list args);
static char sprint_buf[1024];
void
printk(char *fmt, ...)
{
va_list args;
int n;
va_start(args, fmt);
n = vsprintf(sprint_buf, fmt, args);
va_end(args);
write(stdout, sprint_buf, n);
}
int
printf(char *fmt, ...)
{
va_list args;
int n;
va_start(args, fmt);
n = vsprintf(sprint_buf, fmt, args);
va_end(args);
write(stdout, sprint_buf, n);
return n;
}
arch/ppc/boot/common/cpc700_memory.c 0 → 100644
View file @ 037bd2fd
/*
* arch/ppc/boot/common/cpc700_memory.c
*
* Find memory based upon settings in the CPC700 bridge
*
* Author: Dan Cox
*
* Copyright 2001-2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <asm/types.h>
#include <asm/io.h>
#include "cpc700.h"
unsigned long
cpc700_get_mem_size(void)
{
int i;
unsigned long len, amt;
/* Start at MB1EA, since MB0EA will most likely be the ending address
for ROM space. */
for(len = 0, i = CPC700_MB1EA; i <= CPC700_MB4EA; i+=4) {
amt = cpc700_read_memreg(i);
if (amt == 0)
break;
len = amt;
}
return len;
}
arch/ppc/boot/common/misc-simple.c
View file @ 037bd2fd
...@@ -64,6 +64,7 @@ extern char _end[]; ...@@ -64,6 +64,7 @@ extern char _end[];
extern unsigned long start; extern unsigned long start;
extern int CRT_tstc(void); extern int CRT_tstc(void);
extern unsigned long get_mem_size(void);
extern unsigned long serial_init(int chan, void *ignored); extern unsigned long serial_init(int chan, void *ignored);
extern void serial_close(unsigned long com_port); extern void serial_close(unsigned long com_port);
extern void gunzip(void *, int, unsigned char *, int *); extern void gunzip(void *, int, unsigned char *, int *);
...@@ -75,10 +76,19 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) ...@@ -75,10 +76,19 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
int timer = 0; int timer = 0;
char *cp, ch; char *cp, ch;
struct bi_record *rec, *birecs; struct bi_record *rec, *birecs;
unsigned long TotalMemory = 0;
serial_fixups(); serial_fixups();
com_port = serial_init(0, NULL); com_port = serial_init(0, NULL);
#if defined(CONFIG_LOPEC) || defined(CONFIG_PAL4)
/*
* Call get_mem_size(), which is memory controller dependant,
* and we must have the correct file linked in here.
*/
TotalMemory = get_mem_size();
#endif
/* assume the chunk below 8M is free */ /* assume the chunk below 8M is free */
end_avail = (char *)0x00800000; end_avail = (char *)0x00800000;
...@@ -194,6 +204,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) ...@@ -194,6 +204,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
rec->size = sizeof(struct bi_record); rec->size = sizeof(struct bi_record);
rec = (struct bi_record *)((unsigned long)rec + rec->size); rec = (struct bi_record *)((unsigned long)rec + rec->size);
if ( TotalMemory ) {
rec->tag = BI_MEMSIZE;
rec->data[0] = TotalMemory;
rec->size = sizeof(struct bi_record) + sizeof(unsigned long);
rec = (struct bi_record *)((unsigned long)rec + rec->size);
}
rec->tag = BI_CMD_LINE; rec->tag = BI_CMD_LINE;
memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1); memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1);
rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1; rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1;
......
arch/ppc/boot/common/mpc10x_memory.c 0 → 100644
View file @ 037bd2fd
/*
* arch/ppc/boot/common/mpc10x_common.c
*
* A routine to find out how much memory the machine has.
*
* Based on:
* arch/ppc/kernel/mpc10x_common.c
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* Copyright 2001-2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/pci.h>
#include <asm/types.h>
#include <asm/io.h>
#include "mpc10x.h"
/*
* *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
*/
/*
* PCI config space macros, similar to indirect_xxx and early_xxx macros.
* We assume bus 0.
*/
#define MPC10X_CFG_read(val, addr, type, op) *val = op((type)(addr))
#define MPC10X_CFG_write(val, addr, type, op) op((type *)(addr), (val))
#define MPC10X_PCI_OP(rw, size, type, op, mask) \
static void \
mpc10x_##rw##_config_##size(unsigned int *cfg_addr, \
unsigned int *cfg_data, int devfn, int offset, \
type val) \
{ \
out_be32(cfg_addr, \
((offset & 0xfc) << 24) | (devfn << 16) \
| (0 << 8) | 0x80); \
MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op); \
return; \
}
MPC10X_PCI_OP(read, byte, u8 *, in_8, 3)
MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
/*
* Read the memory controller registers to determine the amount of memory in
* the system. This assumes that the firmware has correctly set up the memory
* controller registers. On CONFIG_ALL_PPC, we know we are being called
* under a PReP memory map. On all other machines, we assume we are under
* a CHRP memory map.
*/
unsigned long
get_mem_size(void)
{
unsigned int *config_addr, *config_data, val;
unsigned long start, end, total, offset;
int i;
unsigned char bank_enables;
#ifdef CONFIG_ALL_PPC
config_addr = (unsigned int *)MPC10X_MAPA_CNFG_ADDR;
config_data = (unsigned int *)MPC10X_MAPA_CNFG_DATA;
#else
config_addr = (unsigned int *)MPC10X_MAPB_CNFG_ADDR;
config_data = (unsigned int *)MPC10X_MAPB_CNFG_DATA;
#endif
mpc10x_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0),
MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables);
total = 0;
for (i = 0; i < 8; i++) {
if (bank_enables & (1 << i)) {
offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
mpc10x_read_config_dword(config_addr, config_data,
PCI_DEVFN(0,0), offset, &val);
start = (val >> ((i & 3) << 3)) & 0xff;
offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
mpc10x_read_config_dword(config_addr, config_data,
PCI_DEVFN(0,0), offset, &val);
val = (val >> ((i & 3) << 3)) & 0x03;
start = (val << 28) | (start << 20);
offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
mpc10x_read_config_dword(config_addr, config_data,
PCI_DEVFN(0,0), offset, &val);
end = (val >> ((i & 3) << 3)) & 0xff;
offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
mpc10x_read_config_dword(config_addr, config_data,
PCI_DEVFN(0,0), offset, &val);
val = (val >> ((i & 3) << 3)) & 0x03;
end = (val << 28) | (end << 20) | 0xfffff;
total += (end - start + 1);
}
}
return total;
}
arch/ppc/boot/common/util.S
View file @ 037bd2fd
...@@ -160,11 +160,6 @@ udelay: ...@@ -160,11 +160,6 @@ udelay:
blt 2b blt 2b
3: blr 3: blr
.globl _put_MSR
_put_MSR:
mtmsr r3
blr
.section ".relocate_code","xa" .section ".relocate_code","xa"
/* /*
* Flush and enable instruction cache * Flush and enable instruction cache
......
arch/ppc/boot/include/cpc700.h 0 → 100644
View file @ 037bd2fd
#ifndef __PPC_BOOT_CPC700_H
#define __PPC_BOOT_CPC700_H
#define CPC700_MEM_CFGADDR 0xff500008
#define CPC700_MEM_CFGDATA 0xff50000c
#define CPC700_MB0SA 0x38
#define CPC700_MB0EA 0x58
#define CPC700_MB1SA 0x3c
#define CPC700_MB1EA 0x5c
#define CPC700_MB2SA 0x40
#define CPC700_MB2EA 0x60
#define CPC700_MB3SA 0x44
#define CPC700_MB3EA 0x64
#define CPC700_MB4SA 0x48
#define CPC700_MB4EA 0x68
static inline long
cpc700_read_memreg(int reg)
{
out_be32((volatile unsigned int *) CPC700_MEM_CFGADDR, reg);
return in_be32((volatile unsigned int *) CPC700_MEM_CFGDATA);
}
#endif
arch/ppc/boot/include/mpc10x.h 0 → 100644
View file @ 037bd2fd
/*
* arch/ppc/boot/include/mpc10.h
*
* Common defines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
* ctrl/EPIC/etc.
*
* Author: Tom Rini <trini@mvista.com>
*
* This is a heavily stripped down version of:
* include/asm-ppc/mpc10x.h
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* Copyright 2001-2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __BOOT_MPC10X_H__
#define __BOOT_MPC10X_H__
/*
* The values here don't completely map everything but should work in most
* cases.
*
* MAP A (PReP Map)
* Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
* Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
* PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000
* EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
*
* MAP B (CHRP Map)
* Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
* Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
* PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000
* EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
*/
/* Define the type of map to use */
#define MPC10X_MEM_MAP_A 1
#define MPC10X_MEM_MAP_B 2
/* Map A (PReP Map) Defines */
#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8
#define MPC10X_MAPA_CNFG_DATA 0x80000cfc
/* Map B (CHRP Map) Defines */
#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
#define MPC10X_MAPB_CNFG_DATA 0xfee00000
/* Define offsets for the memory controller registers in the config space */
#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
#define MPC10X_MCTLR_MEM_END_2i 0x94 /* Banks 4-7 */
#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
#endif /* __BOOT_MPC10X_H__ */
arch/ppc/boot/include/of1275.h 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
typedef void *prom_handle;
typedef void *ihandle;
typedef void *phandle;
typedef int (*prom_entry)(void *);
#define OF_INVALID_HANDLE ((prom_handle)-1UL)
extern prom_entry of_prom_entry;
/* function declarations */
void * claim(unsigned int virt, unsigned int size, unsigned int align);
void enter(void);
void exit(void);
phandle finddevice(const char *name);
int getprop(phandle node, const char *name, void *buf, int buflen);
void ofinit(prom_entry entry);
int ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr);
int read(ihandle instance, void *buf, int buflen);
void release(void *virt, unsigned int size);
int write(ihandle instance, void *buf, int buflen);
/* inlines */
extern inline void pause(void)
{
enter();
}
arch/ppc/boot/ld.script
View file @ 037bd2fd
...@@ -39,7 +39,7 @@ SECTIONS ...@@ -39,7 +39,7 @@ SECTIONS
PROVIDE (etext = .); PROVIDE (etext = .);
/* Read-write section, merged into data segment: */ /* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000; . = ALIGN(8);
.data : .data :
{ {
*(.data) *(.data)
...@@ -69,6 +69,7 @@ SECTIONS ...@@ -69,6 +69,7 @@ SECTIONS
_edata = .; _edata = .;
PROVIDE (edata = .); PROVIDE (edata = .);
. = ALIGN(8);
__bss_start = .; __bss_start = .;
.bss : .bss :
{ {
......
arch/ppc/boot/of1275/Makefile 0 → 100644
View file @ 037bd2fd
#
# Makefile of1275 stuff
#
L_TARGET := of1275.a
obj-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o \
ofstdio.o read.o release.o write.o
include $(TOPDIR)/Rules.make
arch/ppc/boot/chrp/misc.S → arch/ppc/boot/of1275/claim.c
View file @ 037bd2fd
/* /*
* Copyright (C) Paul Mackerras 1997. * Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version * as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version. * 2 of the License, or (at your option) any later version.
*/ */
.text
/* #include "of1275.h"
* Use the BAT0 registers to map the 1st 8MB of RAM to 0x90000000.
*/
.globl setup_bats
setup_bats:
mfpvr 3
rlwinm 3,3,16,16,31 /* r3 = 1 for 601, 4 for 604 */
cmpi 0,3,1
lis 4,0x9000
bne 4f
ori 4,4,4 /* set up BAT registers for 601 */
li 5,0x7f
b 5f
4: ori 4,4,0xff /* set up BAT registers for 604 */
li 5,2
mtdbatu 3,4
mtdbatl 3,5
5: mtibatu 3,4
mtibatl 3,5
isync
blr
/* void *
* Flush the dcache and invalidate the icache for a range of addresses. claim(unsigned int virt, unsigned int size, unsigned int align)
* {
* flush_cache(addr, len) struct prom_args {
*/ char *service;
.global flush_cache int nargs;
flush_cache: int nret;
addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */ unsigned int virt;
rlwinm. 4,4,27,5,31 unsigned int size;
mtctr 4 unsigned int align;
beqlr void *ret;
1: dcbf 0,3 } args;
icbi 0,3
addi 3,3,0x20 args.service = "claim";
bdnz 1b args.nargs = 3;
sync args.nret = 1;
isync args.virt = virt;
blr args.size = size;
args.align = align;
(*of_prom_entry)(&args);
return args.ret;
}
arch/ppc/boot/of1275/enter.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
void
enter(void)
{
struct prom_args {
char *service;
} args;
args.service = "enter";
(*of_prom_entry)(&args);
}
arch/ppc/boot/of1275/exit.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
void
exit(void)
{
struct prom_args {
char *service;
} args;
for (;;) {
args.service = "exit";
(*of_prom_entry)(&args);
}
}
arch/ppc/boot/of1275/finddevice.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
phandle
finddevice(const char *name)
{
struct prom_args {
char *service;
int nargs;
int nret;
const char *devspec;
phandle device;
} args;
args.service = "finddevice";
args.nargs = 1;
args.nret = 1;
args.devspec = name;
args.device = OF_INVALID_HANDLE;
(*of_prom_entry)(&args);
return args.device;
}
arch/ppc/boot/of1275/getprop.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
int
getprop(phandle node, const char *name, void *buf, int buflen)
{
struct prom_args {
char *service;
int nargs;
int nret;
phandle node;
const char *name;
void *buf;
int buflen;
int size;
} args;
args.service = "getprop";
args.nargs = 4;
args.nret = 1;
args.node = node;
args.name = name;
args.buf = buf;
args.buflen = buflen;
args.size = -1;
(*of_prom_entry)(&args);
return args.size;
}
arch/ppc/boot/of1275/ofinit.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
prom_entry of_prom_entry;
void
ofinit(prom_entry prom_ptr)
{
of_prom_entry = prom_ptr;
}
arch/ppc/boot/of1275/ofstdio.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
int
ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr)
{
ihandle in, out;
phandle chosen;
if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE)
goto err;
if (getprop(chosen, "stdout", &out, sizeof(out)) != 4)
goto err;
if (getprop(chosen, "stdin", &in, sizeof(in)) != 4)
goto err;
*stdin = in;
*stdout = out;
*stderr = out;
return 0;
err:
return -1;
}
arch/ppc/boot/of1275/read.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
int
read(ihandle instance, void *buf, int buflen)
{
struct prom_args {
char *service;
int nargs;
int nret;
ihandle instance;
void *buf;
int buflen;
int actual;
} args;
args.service = "read";
args.nargs = 3;
args.nret = 1;
args.instance = instance;
args.buf = buf;
args.buflen = buflen;
args.actual = -1;
(*of_prom_entry)(&args);
return args.actual;
}
arch/ppc/boot/of1275/release.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
void
release(void *virt, unsigned int size)
{
struct prom_args {
char *service;
int nargs;
int nret;
void *virt;
unsigned int size;
} args;
args.service = "release";
args.nargs = 2;
args.nret = 0;
args.virt = virt;
args.size = size;
(*of_prom_entry)(&args);
}
arch/ppc/boot/of1275/write.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
* Copyright (C) Leigh Brown 2002.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "of1275.h"
int
write(ihandle instance, void *buf, int buflen)
{
struct prom_args {
char *service;
int nargs;
int nret;
ihandle instance;
void *buf;
int buflen;
int actual;
} args;
args.service = "write";
args.nargs = 3;
args.nret = 1;
args.instance = instance;
args.buf = buf;
args.buflen = buflen;
args.actual = -1;
(*of_prom_entry)(&args);
return args.actual;
}
arch/ppc/boot/pmac/Makefile → arch/ppc/boot/openfirmware/Makefile
View file @ 037bd2fd
# Makefile for making XCOFF bootable images for booting on PowerMacs # Makefile for making bootable images on various OpenFirmware machines.
# using Open Firmware.
# #
# Paul Mackerras January 1997 # Paul Mackerras January 1997
# # XCOFF bootable images for PowerMacs
# Cleaned up, moved into arch/ppc/boot/pmac # Geert Uytterhoeven September 1997
# ELF bootable iamges for CHRP machines.
# Tom Rini January 2001 # Tom Rini January 2001
# Cleaned up, moved into arch/ppc/boot/pmac
# Tom Rini July/August 2002
# Merged 'chrp' and 'pmac' into 'openfirmware', and cleaned up the
# rules.
OBJCOPY_ARGS = -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment OBJCOPY_ARGS = -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment
COFF_LD_ARGS = -T ../ld.script -e _start -Ttext 0x00500000 -Bstatic COFF_LD_ARGS = -T ../ld.script -e _start -Ttext 0x00500000 -Bstatic
CHRP_LD_ARGS = -T ../ld.script -Ttext 0x01000000 CHRP_LD_ARGS = -T ../ld.script -e _start -Ttext 0x00400000
NEWWORLD_LD_ARGS = -T ../ld.script -e _start -Ttext 0x01000000
COMMONOBJS = start.o misc.o ../common/string.o ../common/ofcommon.o COMMONOBJS = start.o misc.o ../common/string.o common.o
COFFOBJS = ../common/coffcrt0.o $(COMMONOBJS) coffmain.o COFFOBJS = ../common/coffcrt0.o $(COMMONOBJS) coffmain.o
CHRPOBJS = ../common/crt0.o $(COMMONOBJS) chrpmain.o CHRPOBJS = ../common/crt0.o $(COMMONOBJS) chrpmain.o
NEWWORLDOBJS = ../common/crt0.o $(COMMONOBJS) newworldmain.o
EXTRA_TARGETS := $(COFFOBJS) $(CHRPOBJS) EXTRA_TARGETS := $(COFFOBJS) $(CHRPOBJS) $(NEWWORLDOBJS)
LIBS = $(TOPDIR)/lib/lib.a ../lib/zlib.a LIBS = $(TOPDIR)/lib/lib.a ../lib/zlib.a ../of1275/of1275.a
ADDNOTE := ../utils/addnote
MKNOTE := ../utils/mknote MKNOTE := ../utils/mknote
SIZE := ../utils/size SIZE := ../utils/size
OFFSET := ../utils/offset OFFSET := ../utils/offset
...@@ -29,7 +36,7 @@ ifdef CONFIG_PPC64BRIDGE ...@@ -29,7 +36,7 @@ ifdef CONFIG_PPC64BRIDGE
END += .64 END += .64
endif endif
TFTPIMAGE=/tftpboot/zImage.pmac$(END) TFTPIMAGE=/tftpboot/zImage.
../common/coffcrt0.o: ../common/coffcrt0.o:
$(MAKE) -C ../common coffcrt0.o $(MAKE) -C ../common coffcrt0.o
...@@ -44,34 +51,42 @@ ifdef CONFIG_XMON ...@@ -44,34 +51,42 @@ ifdef CONFIG_XMON
--set-section-flags=.sysmap=contents,alloc,load,readonly,data --set-section-flags=.sysmap=contents,alloc,load,readonly,data
endif endif
# Place the ramdisk in the initrd image.
image-initrd.o: image.o ../images/ramdisk.image.gz
$(OBJCOPY) image.o $@ \
--add-section=.ramdisk=../images/ramdisk.image.gz \
--set-section-flags=.ramdisk=contents,alloc,load,readonly,data
# Create the note section for New-World PowerMacs.
note: $(MKNOTE)
$(MKNOTE) > note
znetboot: vmlinux.coff vmlinux.elf-pmac zImage znetboot: vmlinux.coff vmlinux.elf-pmac zImage
cp ../images/vmlinux.coff $(TFTPIMAGE) cp ../images/vmlinux.coff $(TFTPIMAGE).pmac$(END)
cp ../images/vmlinux.elf-pmac $(TFTPIMAGE).elf cp ../images/vmlinux.elf-pmac $(TFTPIMAGE).pmac$(END)elf
cp ../images/zImage.chrp $(TFTPIMAGE).chrp$(END)
znetboot.initrd: vmlinux.initrd.coff vmlinux.initrd.elf-pmac znetboot.initrd: vmlinux.initrd.coff vmlinux.initrd.elf-pmac
cp ../images/vmlinux.initrd.coff $(TFTPIMAGE) cp ../images/vmlinux.initrd.coff $(TFTPIMAGE).pmac$(END)
cp ../images/vmlinux.initrd.elf-pmac $(TFTPIMAGE).elf cp ../images/vmlinux.initrd.elf-pmac $(TFTPIMAGE).pmac$(END).elf
cp ../images/zImage.initrd.chrp $(TFTPIMAGE).chrp$(END)
miboot.image: ../common/dummy.o ../images/vmlinux.gz miboot.image: ../common/dummy.o ../images/vmlinux.gz
$(OBJCOPY) $(OBJCOPY_ARGS) --add-section=image=../images/vmlinux.gz \ $(OBJCOPY) $(OBJCOPY_ARGS) --add-section=image=../images/vmlinux.gz \
../common/dummy.o ../images/$@ ../common/dummy.o ../images/$@
miboot.initrd.image: miboot.image ../images/ramdisk.image.gz miboot.initrd.image: miboot.image ../images/ramdisk.image.gz
$(OBJCOPY) $(OBJCOPY_ARGS) --add-section=initrd=../images/ramdisk.image.gz \ $(OBJCOPY) $(OBJCOPY_ARGS) \
--add-section=initrd=../images/ramdisk.image.gz \
../images/miboot.image ../images/$@ ../images/miboot.image ../images/$@
coffboot: $(COFFOBJS) image.o $(LIBS) ../ld.script coffboot: $(COFFOBJS) image.o $(LIBS)
$(LD) -o $@ $(COFF_LD_ARGS) $(COFFOBJS) image.o $(LIBS) $(LD) -o $@ $(COFF_LD_ARGS) $^
$(OBJCOPY) $@ $@ -R .comment $(OBJCOPY) $@ $@ -R .comment -R .ramdisk
coffboot.initrd: $(COFFOBJS) image.o $(LIBS) ../ld.script \ coffboot.initrd: $(COFFOBJS) image-initrd.o $(LIBS)
../images/ramdisk.image.gz $(LD) -o $@ $(COFF_LD_ARGS) $^
$(OBJCOPY) image.o image-coff.o \
--add-section=.ramdisk=../images/ramdisk.image.gz \
--set-section-flags=.ramdisk=contents,alloc,load,readonly,data
$(LD) -o $@ $(COFF_LD_ARGS) $(COFFOBJS) image-coff.o $(LIBS)
$(OBJCOPY) $@ $@ -R .comment $(OBJCOPY) $@ $@ -R .comment
rm -f image-coff.o
vmlinux.coff: coffboot $(HACKCOFF) vmlinux.coff: coffboot $(HACKCOFF)
$(OBJCOPY) $(OBJCOPY_ARGS) coffboot ../images/$@ $(OBJCOPY) $(OBJCOPY_ARGS) coffboot ../images/$@
...@@ -85,26 +100,38 @@ vmlinux.initrd.coff: coffboot.initrd $(HACKCOFF) ...@@ -85,26 +100,38 @@ vmlinux.initrd.coff: coffboot.initrd $(HACKCOFF)
rm -f coffboot.initrd rm -f coffboot.initrd
ln -sf vmlinux.initrd.coff ../images/zImage.initrd.pmac ln -sf vmlinux.initrd.coff ../images/zImage.initrd.pmac
vmlinux.elf-pmac: $(CHRPOBJS) $(LIBS) $(MKNOTE) image.o vmlinux.elf-pmac: $(NEWWORLDOBJS) $(LIBS) image.o
$(LD) $(CHRP_LD_ARGS) -o ../images/$@ $(CHRPOBJS) $(LIBS) image.o $(LD) $(NEWWORLD_LD_ARGS) -o ../images/$@ $^
$(MKNOTE) > note
$(OBJCOPY) ../images/$@ ../images/$@ --add-section=.note=note \ vmlinux.initrd.elf-pmac: $(NEWWORLDOBJS) $(LIBS) image-initrd.o
$(LD) $(NEWWORLD_LD_ARGS) -o ../images/$@ $^
zImage.chrp: $(CHRPOBJS) image.o $(LIBS)
$(LD) $(CHRP_LD_ARGS) -o ../images/$@ $^
zImage.initrd.chrp: $(CHRPOBJS) image-initrd.o $(LIBS)
$(LD) $(CHRP_LD_ARGS) -o ../images/$@ $^
zImage: vmlinux.coff vmlinux.elf-pmac zImage.chrp miboot.image $(ADDNOTE) \
note
$(OBJCOPY) ../images/vmlinux.elf-pmac ../images/vmlinux.elf-pmac \
--add-section=.note=note -R .comment -R .ramdisk
$(OBJCOPY) ../images/zImage.chrp ../images/zImage.chrp \
-R .comment -R .ramdisk -R .comment -R .ramdisk
rm -f note cp ../images/zImage.chrp ../images/zImage.chrp-rs6k
$(ADDNOTE) ../images/zImage.chrp-rs6k
vmlinux.initrd.elf-pmac: $(CHRPOBJS) $(LIBS) $(MKNOTE) image.o \ zImage.initrd: vmlinux.initrd.coff vmlinux.initrd.elf-pmac zImage.initrd.chrp \
../images/ramdisk.image.gz miboot.initrd.image $(ADDNOTE) note
$(OBJCOPY) image.o image-elf.o \ $(OBJCOPY) ../images/vmlinux.initrd.elf-pmac \
--add-section=.ramdisk=../images/ramdisk.image.gz \ ../images/vmlinux.initrd.elf-pmac --add-section=.note=note \
--set-section-flags=.ramdisk=contents,alloc,load,readonly,data
$(LD) $(CHRP_LD_ARGS) -o ../images/$@ $(CHRPOBJS) $(LIBS) image-elf.o
$(MKNOTE) > note
$(OBJCOPY) ../images/$@ ../images/$@ --add-section=.note=note \
-R .comment -R .comment
rm -f note image-elf.o $(OBJCOPY) ../images/zImage.initrd.chrp ../images/zImage.initrd.chrp \
-R .comment
zImage: vmlinux.coff vmlinux.elf-pmac miboot.image cp ../images/zImage.initrd.chrp ../images/zImage.initrd.chrp-rs6k
$(ADDNOTE) ../images/zImage.initrd.chrp-rs6k
zImage.initrd: vmlinux.initrd.coff vmlinux.initrd.elf-pmac miboot.initrd.image clean:
rm -f note
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
arch/ppc/boot/chrp/main.c → arch/ppc/boot/openfirmware/chrpmain.c
View file @ 037bd2fd
...@@ -7,23 +7,20 @@ ...@@ -7,23 +7,20 @@
* 2 of the License, or (at your option) any later version. * 2 of the License, or (at your option) any later version.
*/ */
#include "nonstdio.h" #include "nonstdio.h"
#include "of1275.h"
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/page.h> #include <asm/page.h>
/* Passed from the linker */ /* Passed from the linker */
extern char __image_begin, __image_end; extern char __image_begin, __image_end;
extern char __ramdisk_begin[], __ramdisk_end; extern char __ramdisk_begin, __ramdisk_end;
extern char _start, _end; extern char _start, _end;
extern int getprop(void *, const char *, void *, int);
extern unsigned int heap_max; extern unsigned int heap_max;
extern void claim(unsigned int virt, unsigned int size, unsigned int align);
extern void *finddevice(const char *);
extern void flush_cache(void *, unsigned long); extern void flush_cache(void *, unsigned long);
extern void gunzip(void *, int, unsigned char *, int *); extern void gunzip(void *, int, unsigned char *, int *);
extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach, extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
unsigned int progend); unsigned int progend);
extern void pause(void);
char *avail_ram; char *avail_ram;
char *begin_avail, *end_avail; char *begin_avail, *end_avail;
...@@ -46,7 +43,7 @@ static char scratch[SCRATCH_SIZE]; /* 1MB of scratch space for gunzip */ ...@@ -46,7 +43,7 @@ static char scratch[SCRATCH_SIZE]; /* 1MB of scratch space for gunzip */
typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int); typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int);
void void
chrpboot(int a1, int a2, void *prom) boot(int a1, int a2, void *prom)
{ {
unsigned sa, len; unsigned sa, len;
void *dst; void *dst;
...@@ -55,23 +52,23 @@ chrpboot(int a1, int a2, void *prom) ...@@ -55,23 +52,23 @@ chrpboot(int a1, int a2, void *prom)
printf("chrpboot starting: loaded at 0x%p\n\r", &_start); printf("chrpboot starting: loaded at 0x%p\n\r", &_start);
initrd_size = (char *)(&__ramdisk_end) - (char *)(&__ramdisk_begin); initrd_size = &__ramdisk_end - &__ramdisk_begin;
if (initrd_size) { if (initrd_size) {
initrd_start = (RAM_END - initrd_size) & ~0xFFF; initrd_start = (RAM_END - initrd_size) & ~0xFFF;
a1 = initrd_start; a1 = initrd_start;
a2 = initrd_size; a2 = initrd_size;
claim(initrd_start, RAM_END - initrd_start, 0); claim(initrd_start, RAM_END - initrd_start, 0);
printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r", printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r",
initrd_start, (char *)(&__ramdisk_begin), initrd_size); initrd_start, &__ramdisk_begin, initrd_size);
memcpy((char *)initrd_start, (char *)(&__ramdisk_begin), initrd_size); memcpy((char *)initrd_start, &__ramdisk_begin, initrd_size);
} else { } else {
initrd_start = 0; initrd_start = 0;
initrd_size = 0; initrd_size = 0;
a2 = 0xdeadbeef; a2 = 0xdeadbeef;
} }
im = (char *)(&__image_begin); im = &__image_begin;
len = (char *)(&__image_end) - (char *)(&__image_begin); len = &__image_end - &__image_begin;
/* claim 4MB starting at PROG_START */ /* claim 4MB starting at PROG_START */
claim(PROG_START, PROG_SIZE - PROG_START, 0); claim(PROG_START, PROG_SIZE - PROG_START, 0);
dst = (void *) PROG_START; dst = (void *) PROG_START;
......
arch/ppc/boot/pmac/coffmain.c → arch/ppc/boot/openfirmware/coffmain.c
View file @ 037bd2fd
...@@ -10,6 +10,7 @@ ...@@ -10,6 +10,7 @@
#include <asm/page.h> #include <asm/page.h>
#include "nonstdio.h" #include "nonstdio.h"
#include "of1275.h"
#include "zlib.h" #include "zlib.h"
/* Passed from the linker */ /* Passed from the linker */
...@@ -17,17 +18,13 @@ extern char __image_begin, __image_end; ...@@ -17,17 +18,13 @@ extern char __image_begin, __image_end;
extern char __ramdisk_begin[], __ramdisk_end; extern char __ramdisk_begin[], __ramdisk_end;
extern char _start, _end; extern char _start, _end;
extern char *claim(unsigned, unsigned, unsigned);
extern char image_data[], initrd_data[]; extern char image_data[], initrd_data[];
extern int initrd_len, image_len; extern int initrd_len, image_len;
extern int getprop(void *, const char *, void *, int);
extern unsigned int heap_max; extern unsigned int heap_max;
extern void *finddevice(const char *);
extern void flush_cache(void *start, unsigned int len); extern void flush_cache(void *start, unsigned int len);
extern void gunzip(void *, int, unsigned char *, int *); extern void gunzip(void *, int, unsigned char *, int *);
extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach, extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
unsigned int progend); unsigned int progend);
extern void pause(void);
extern void setup_bats(unsigned long start); extern void setup_bats(unsigned long start);
char *avail_ram; char *avail_ram;
......
arch/ppc/boot/openfirmware/common.c 0 → 100644
View file @ 037bd2fd
/*
* Copyright (C) Paul Mackerras 1997.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "zlib.h"
#include "nonstdio.h"
#include "of1275.h"
#include <asm/bootinfo.h>
#include <asm/page.h>
/* Information from the linker */
extern char __sysmap_begin, __sysmap_end;
extern int strcmp(const char *s1, const char *s2);
extern char *avail_ram, *avail_high;
extern char *end_avail;
unsigned int heap_use, heap_max;
struct memchunk {
unsigned int size;
struct memchunk *next;
};
static struct memchunk *freechunks;
static void *zalloc(void *x, unsigned items, unsigned size)
{
void *p;
struct memchunk **mpp, *mp;
size *= items;
size = (size + 7) & -8;
heap_use += size;
if (heap_use > heap_max)
heap_max = heap_use;
for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) {
if (mp->size == size) {
*mpp = mp->next;
return mp;
}
}
p = avail_ram;
avail_ram += size;
if (avail_ram > avail_high)
avail_high = avail_ram;
if (avail_ram > end_avail) {
printf("oops... out of memory\n\r");
pause();
}
return p;
}
static void zfree(void *x, void *addr, unsigned nb)
{
struct memchunk *mp = addr;
nb = (nb + 7) & -8;
heap_use -= nb;
if (avail_ram == addr + nb) {
avail_ram = addr;
return;
}
mp->size = nb;
mp->next = freechunks;
freechunks = mp;
}
#define HEAD_CRC 2
#define EXTRA_FIELD 4
#define ORIG_NAME 8
#define COMMENT 0x10
#define RESERVED 0xe0
#define DEFLATED 8
void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
{
z_stream s;
int r, i, flags;
/* skip header */
i = 10;
flags = src[3];
if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
printf("bad gzipped data\n\r");
exit();
}
if ((flags & EXTRA_FIELD) != 0)
i = 12 + src[10] + (src[11] << 8);
if ((flags & ORIG_NAME) != 0)
while (src[i++] != 0)
;
if ((flags & COMMENT) != 0)
while (src[i++] != 0)
;
if ((flags & HEAD_CRC) != 0)
i += 2;
if (i >= *lenp) {
printf("gunzip: ran out of data in header\n\r");
exit();
}
s.zalloc = zalloc;
s.zfree = zfree;
r = inflateInit2(&s, -MAX_WBITS);
if (r != Z_OK) {
printf("inflateInit2 returned %d\n\r", r);
exit();
}
s.next_in = src + i;
s.avail_in = *lenp - i;
s.next_out = dst;
s.avail_out = dstlen;
r = inflate(&s, Z_FINISH);
if (r != Z_OK && r != Z_STREAM_END) {
printf("inflate returned %d msg: %s\n\r", r, s.msg);
exit();
}
*lenp = s.next_out - (unsigned char *) dst;
inflateEnd(&s);
}
/* Make a bi_rec in OF. We need to be passed a name for BI_BOOTLOADER_ID,
* a machine type for BI_MACHTYPE, and the location where the end of the
* bootloader is (PROG_START + PROG_SIZE)
*/
void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
unsigned long progend)
{
unsigned long sysmap_size;
struct bi_record *rec;
/* Figure out the size of a possible System.map we're going to
* pass along.
* */
sysmap_size = (unsigned long)(&__sysmap_end) -
(unsigned long)(&__sysmap_begin);
/* leave a 1MB gap then align to the next 1MB boundary */
addr = _ALIGN(addr+ (1<<20) - 1, (1<<20));
/* oldworld machine seem very unhappy about this. -- Tom */
if (addr >= progend)
claim(addr, 0x1000, 0);
rec = (struct bi_record *)addr;
rec->tag = BI_FIRST;
rec->size = sizeof(struct bi_record);
rec = (struct bi_record *)((unsigned long)rec + rec->size);
rec->tag = BI_BOOTLOADER_ID;
sprintf( (char *)rec->data, name);
rec->size = sizeof(struct bi_record) + strlen(name) + 1;
rec = (struct bi_record *)((unsigned long)rec + rec->size);
rec->tag = BI_MACHTYPE;
rec->data[0] = mach;
rec->data[1] = 1;
rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long);
rec = (struct bi_record *)((unsigned long)rec + rec->size);
if (sysmap_size) {
rec->tag = BI_SYSMAP;
rec->data[0] = (unsigned long)(&__sysmap_begin);
rec->data[1] = sysmap_size;
rec->size = sizeof(struct bi_record) + 2 *
sizeof(unsigned long);
rec = (struct bi_record *)((unsigned long)rec + rec->size);
}
rec->tag = BI_LAST;
rec->size = sizeof(struct bi_record);
rec = (struct bi_record *)((unsigned long)rec + rec->size);
}
arch/ppc/boot/pmac/chrpmain.c → arch/ppc/boot/openfirmware/newworldmain.c
View file @ 037bd2fd
...@@ -7,6 +7,7 @@ ...@@ -7,6 +7,7 @@
* 2 of the License, or (at your option) any later version. * 2 of the License, or (at your option) any later version.
*/ */
#include "nonstdio.h" #include "nonstdio.h"
#include "of1275.h"
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/page.h> #include <asm/page.h>
...@@ -15,16 +16,11 @@ extern char __image_begin, __image_end; ...@@ -15,16 +16,11 @@ extern char __image_begin, __image_end;
extern char __ramdisk_begin[], __ramdisk_end; extern char __ramdisk_begin[], __ramdisk_end;
extern char _start, _end; extern char _start, _end;
extern int getprop(void *, const char *, void *, int);
extern unsigned int heap_max; extern unsigned int heap_max;
extern void *claim(unsigned int virt, unsigned int size, unsigned int align);
extern void *finddevice(const char *);
extern void flush_cache(void *start, unsigned int len); extern void flush_cache(void *start, unsigned int len);
extern void gunzip(void *, int, unsigned char *, int *); extern void gunzip(void *, int, unsigned char *, int *);
extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach, extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
unsigned int progend); unsigned int progend);
extern void pause(void);
extern void release(void *ptr, unsigned int len);
char *avail_ram; char *avail_ram;
char *begin_avail, *end_avail; char *begin_avail, *end_avail;
......
arch/ppc/boot/pmac/start.c → arch/ppc/boot/openfirmware/start.c
View file @ 037bd2fd
...@@ -7,33 +7,22 @@ ...@@ -7,33 +7,22 @@
* 2 of the License, or (at your option) any later version. * 2 of the License, or (at your option) any later version.
*/ */
#include <stdarg.h> #include <stdarg.h>
#include "of1275.h"
extern int strlen(const char *s); extern int strlen(const char *s);
extern void boot(int a1, int a2, void *prom); extern void boot(int a1, int a2, void *prom);
int (*prom)(void *); phandle stdin;
phandle stdout;
phandle stderr;
void *chosen_handle;
void *stdin;
void *stdout;
void *stderr;
void exit(void);
void *finddevice(const char *name);
int getprop(void *phandle, const char *name, void *buf, int buflen);
void printk(char *fmt, ...); void printk(char *fmt, ...);
void void
start(int a1, int a2, void *promptr) start(int a1, int a2, void *promptr)
{ {
prom = (int (*)(void *)) promptr; ofinit(promptr);
chosen_handle = finddevice("/chosen"); if (ofstdio(&stdin, &stdout, &stderr))
if (chosen_handle == (void *) -1)
exit();
if (getprop(chosen_handle, "stdout", &stdout, sizeof(stdout)) != 4)
exit();
stderr = stdout;
if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4)
exit(); exit();
boot(a1, a2, promptr); boot(a1, a2, promptr);
...@@ -41,30 +30,6 @@ start(int a1, int a2, void *promptr) ...@@ -41,30 +30,6 @@ start(int a1, int a2, void *promptr)
exit(); exit();
} }
int
write(void *handle, void *ptr, int nb)
{
struct prom_args {
char *service;
int nargs;
int nret;
void *ihandle;
void *addr;
int len;
int actual;
} args;
args.service = "write";
args.nargs = 3;
args.nret = 1;
args.ihandle = handle;
args.addr = ptr;
args.len = nb;
args.actual = -1;
(*prom)(&args);
return args.actual;
}
int writestring(void *f, char *ptr, int nb) int writestring(void *f, char *ptr, int nb)
{ {
int w = 0, i; int w = 0, i;
...@@ -84,142 +49,6 @@ int writestring(void *f, char *ptr, int nb) ...@@ -84,142 +49,6 @@ int writestring(void *f, char *ptr, int nb)
return nb; return nb;
} }
int
read(void *handle, void *ptr, int nb)
{
struct prom_args {
char *service;
int nargs;
int nret;
void *ihandle;
void *addr;
int len;
int actual;
} args;
args.service = "read";
args.nargs = 3;
args.nret = 1;
args.ihandle = handle;
args.addr = ptr;
args.len = nb;
args.actual = -1;
(*prom)(&args);
return args.actual;
}
void
exit(void)
{
struct prom_args {
char *service;
} args;
for (;;) {
args.service = "exit";
(*prom)(&args);
}
}
void
pause(void)
{
struct prom_args {
char *service;
} args;
args.service = "enter";
(*prom)(&args);
}
void *
finddevice(const char *name)
{
struct prom_args {
char *service;
int nargs;
int nret;
const char *devspec;
void *phandle;
} args;
args.service = "finddevice";
args.nargs = 1;
args.nret = 1;
args.devspec = name;
args.phandle = (void *) -1;
(*prom)(&args);
return args.phandle;
}
void *
claim(unsigned int virt, unsigned int size, unsigned int align)
{
struct prom_args {
char *service;
int nargs;
int nret;
unsigned int virt;
unsigned int size;
unsigned int align;
void *ret;
} args;
args.service = "claim";
args.nargs = 3;
args.nret = 1;
args.virt = virt;
args.size = size;
args.align = align;
(*prom)(&args);
return args.ret;
}
void
release(void *virt, unsigned int size)
{
struct prom_args {
char *service;
int nargs;
int nret;
void *virt;
unsigned int size;
} args;
args.service = "release";
args.nargs = 2;
args.nret = 0;
args.virt = virt;
args.size = size;
(*prom)(&args);
}
int
getprop(void *phandle, const char *name, void *buf, int buflen)
{
struct prom_args {
char *service;
int nargs;
int nret;
void *phandle;
const char *name;
void *buf;
int buflen;
int size;
} args;
args.service = "getprop";
args.nargs = 4;
args.nret = 1;
args.phandle = phandle;
args.name = name;
args.buf = buf;
args.buflen = buflen;
args.size = -1;
(*prom)(&args);
return args.size;
}
int int
putc(int c, void *f) putc(int c, void *f)
{ {
......
arch/ppc/boot/prep/Makefile
View file @ 037bd2fd
...@@ -19,13 +19,14 @@ TFTPIMAGE = $(TFTPBOOT).smp ...@@ -19,13 +19,14 @@ TFTPIMAGE = $(TFTPBOOT).smp
endif endif
LD_ARGS = -T ../ld.script -Ttext 0x00800000 -Bstatic LD_ARGS = -T ../ld.script -Ttext 0x00800000 -Bstatic
boot-y := head.o ../simple/legacy.o misc.o of1275.o \ boot-y := head.o ../simple/legacy.o misc.o \
../common/util.o ../common/string.o \ ../common/util.o ../common/string.o \
../common/misc-common.o ../common/misc-common.o \
../common/mpc10x_memory.o
OBJCOPY_ARGS = -O elf32-powerpc OBJCOPY_ARGS = -O elf32-powerpc
LIBS = ../lib/zlib.a LIBS = ../lib/zlib.a
boot-$($CONFIG_SERIAL_8250_CONSOLE) += ../common/ns16550.o boot-$(CONFIG_SERIAL_8250_CONSOLE) += ../common/ns16550.o
boot-$(CONFIG_VGA_CONSOLE) += vreset.o kbd.o boot-$(CONFIG_VGA_CONSOLE) += vreset.o kbd.o
EXTRA_TARGETS := $(boot-y) EXTRA_TARGETS := $(boot-y)
......
arch/ppc/boot/prep/head.S
View file @ 037bd2fd
...@@ -34,10 +34,6 @@ start_: ...@@ -34,10 +34,6 @@ start_:
isync isync
mr r11,r3 /* Save pointer to residual/board data */ mr r11,r3 /* Save pointer to residual/board data */
mr r25,r5 /* Save OFW pointer */
/* Save the original MSR value */
mfmsr r26
/* Establish default MSR value */ /* Establish default MSR value */
li r3,MSR_IP|MSR_FP li r3,MSR_IP|MSR_FP
...@@ -110,17 +106,11 @@ start_ldr: ...@@ -110,17 +106,11 @@ start_ldr:
li r2,0x000F /* Mask pointer to 16-byte boundary */ li r2,0x000F /* Mask pointer to 16-byte boundary */
andc r1,r1,r2 andc r1,r1,r2
/* Store the original MSR into 'orig_MSR' */
lis r3,orig_MSR@h
ori r3,r3,orig_MSR@l
stw r26,0(r3)
/* Run loader */ /* Run loader */
mr r3,r8 /* Load point */ mr r3,r8 /* Load point */
mr r4,r7 /* Program length */ mr r4,r7 /* Program length */
mr r5,r6 /* Checksum */ mr r5,r6 /* Checksum */
mr r6,r11 /* Residual data */ mr r6,r11 /* Residual data */
mr r7,r25 /* OFW interfaces */
bl decompress_kernel bl decompress_kernel
/* /*
......
arch/ppc/boot/prep/misc.c
View file @ 037bd2fd
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <asm/mmu.h> #include <asm/mmu.h>
#include <asm/byteorder.h> #include <asm/byteorder.h>
#include "nonstdio.h" #include "nonstdio.h"
#include "zlib.h" #include "zlib.h"
...@@ -49,7 +50,6 @@ int keyb_present = 1; /* keyboard controller is present by default */ ...@@ -49,7 +50,6 @@ int keyb_present = 1; /* keyboard controller is present by default */
RESIDUAL hold_resid_buf; RESIDUAL hold_resid_buf;
RESIDUAL *hold_residual = &hold_resid_buf; RESIDUAL *hold_residual = &hold_resid_buf;
unsigned long initrd_size = 0; unsigned long initrd_size = 0;
unsigned long orig_MSR;
char *zimage_start; char *zimage_start;
int zimage_size; int zimage_size;
...@@ -64,16 +64,11 @@ int orig_x, orig_y = 24; ...@@ -64,16 +64,11 @@ int orig_x, orig_y = 24;
#endif /* CONFIG_VGA_CONSOLE */ #endif /* CONFIG_VGA_CONSOLE */
extern int CRT_tstc(void); extern int CRT_tstc(void);
extern void of_init(void *handler);
extern int of_finddevice(const char *device_specifier, int *phandle);
extern int of_getprop(int phandle, const char *name, void *buf, int buflen,
int *size);
extern int vga_init(unsigned char *ISA_mem); extern int vga_init(unsigned char *ISA_mem);
extern void gunzip(void *, int, unsigned char *, int *); extern void gunzip(void *, int, unsigned char *, int *);
extern void _put_MSR(unsigned int val);
extern unsigned long serial_init(int chan, void *ignored); extern unsigned long serial_init(int chan, void *ignored);
extern void serial_fixups(void); extern void serial_fixups(void);
extern unsigned long get_mem_size(void);
void void
writel(unsigned int val, unsigned int address) writel(unsigned int val, unsigned int address)
...@@ -118,15 +113,12 @@ scroll(void) ...@@ -118,15 +113,12 @@ scroll(void)
unsigned long unsigned long
decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum, decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
RESIDUAL *residual, void *OFW_interface) RESIDUAL *residual)
{ {
int timer = 0; int timer = 0;
extern unsigned long start; extern unsigned long start;
char *cp, ch; char *cp, ch;
unsigned long TotalMemory; unsigned long TotalMemory;
int dev_handle;
int mem_info[2];
int res, size;
unsigned char board_type; unsigned char board_type;
unsigned char base_mod; unsigned char base_mod;
int start_multi = 0; int start_multi = 0;
...@@ -140,6 +132,11 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum, ...@@ -140,6 +132,11 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
vga_init((unsigned char *)0xC0000000); vga_init((unsigned char *)0xC0000000);
#endif /* CONFIG_VGA_CONSOLE */ #endif /* CONFIG_VGA_CONSOLE */
/*
* Find out how much memory we have.
*/
TotalMemory = get_mem_size();
/* /*
* Tell the user where we were loaded at and where we were relocated * Tell the user where we were loaded at and where we were relocated
* to for debugging this process. * to for debugging this process.
...@@ -216,47 +213,6 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum, ...@@ -216,47 +213,6 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
} else { } else {
/* Tell the user we didn't find anything. */ /* Tell the user we didn't find anything. */
puts("No residual data found.\n"); puts("No residual data found.\n");
/* Assume 32M in the absence of more info... */
TotalMemory = 0x02000000;
/*
* This is a 'best guess' check. We want to make sure
* we don't try this on a PReP box without OF
* -- Cort
*/
while (OFW_interface && ((unsigned long)OFW_interface < 0x10000000) )
{
/* We need to restore the slightly inaccurate
* MSR so that OpenFirmware will behave. -- Tom
*/
_put_MSR(orig_MSR);
of_init(OFW_interface);
/* get handle to memory description */
res = of_finddevice("/memory@0",
&dev_handle);
if (res)
break;
/* get the info */
res = of_getprop(dev_handle,
"reg",
mem_info,
sizeof(mem_info),
&size);
if (res)
break;
TotalMemory = mem_info[1];
break;
}
hold_residual->TotalMemory = TotalMemory;
residual = hold_residual;
/* Enforce a sane MSR for booting. */
_put_MSR(MSR_IP);
} }
/* assume the chunk below 8M is free */ /* assume the chunk below 8M is free */
...@@ -361,6 +317,11 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum, ...@@ -361,6 +317,11 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
sizeof(unsigned long); sizeof(unsigned long);
rec = (struct bi_record *)((unsigned long)rec + rec->size); rec = (struct bi_record *)((unsigned long)rec + rec->size);
rec->tag = BI_MEMSIZE;
rec->data[0] = TotalMemory;
rec->size = sizeof(struct bi_record) + sizeof(unsigned long);
rec = (struct bi_record *)((unsigned long)rec + rec->size);
rec->tag = BI_CMD_LINE; rec->tag = BI_CMD_LINE;
memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1); memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1);
rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1; rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1;
......
arch/ppc/boot/simple/Makefile
View file @ 037bd2fd
...@@ -3,11 +3,21 @@ ...@@ -3,11 +3,21 @@
# #
# Author: Tom Rini <trini@mvista.com> # Author: Tom Rini <trini@mvista.com>
# #
# Copyright 2001 MontaVista Software Inc. # Copyright 2001-2002 MontaVista Software Inc.
# #
# Notes: For machine targets which produce more than one image, define # Notes:
# (1) For machine targets which produce more than one image, define
# ZNETBOOT and ZNETBOOTRD to the image which should be available for # ZNETBOOT and ZNETBOOTRD to the image which should be available for
# 'znetboot' and 'znetboot.initrd` # 'znetboot' and 'znetboot.initrd`
# (2) Also, for machine targets which just need to remove the ELF header,
# define END to be the machine name you want in the image.
# (3) For machine targets which use the mktree program, define END to be
# the machine name you want in the image, and you can optionally set
# ENTRYPOINT which the image should be loaded at. The optimal setting
# for ENTRYPOINT is the link address.
# (4) It is advisable to pass in the memory size using BI_MEMSIZE and
# get_mem_size(), which is memory controller dependant. Add in the correct
# XXX_memory.o file for this to work, as well as editing the $(MISC) file.
# #
# This program is free software; you can redistribute it and/or modify it # This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the # under the terms of the GNU General Public License as published by the
...@@ -17,40 +27,36 @@ ...@@ -17,40 +27,36 @@
# Normally, we use the 'misc-simple.c' file for decompress_kernel and # Normally, we use the 'misc-simple.c' file for decompress_kernel and
# whatnot. Sometimes we need to override this however. # whatnot. Sometimes we need to override this however.
MISC := ../common/misc-simple.o MISC := ../common/misc-simple.o
ifeq ($(CONFIG_TREEBOOT),y) ifeq ($(CONFIG_IBM_OPENBIOS),y)
ZIMAGE := zImage-TREE ZIMAGE := zImage-TREE
ZIMAGEINITRD := zImage.initrd-TREE ZIMAGEINITRD := zImage.initrd-TREE
TFTPIMAGE := /tftpboot/zImage.embedded END := treeboot
TFTPIMAGE := /tftpboot/zImage.$(END)
MISC := misc-embedded.o MISC := misc-embedded.o
endif endif
ifeq ($(CONFIG_EMBEDDEDBOOT),y) ifeq ($(CONFIG_EMBEDDEDBOOT),y)
ZIMAGE := zImage-EMBEDDED
ZIMAGEINITRD := zImage.initrd-EMBEDDED
TFTPIMAGE := /tftpboot/zImage.embedded TFTPIMAGE := /tftpboot/zImage.embedded
MISC := misc-embedded.o MISC := misc-embedded.o
endif endif
ifeq ($(CONFIG_EV64260),y) ifeq ($(CONFIG_EV64260),y)
ZIMAGE := zImage-EV64260 EXTRA := direct.o misc-ev64260.o
ZIMAGEINITRD := zImage.initrd-EV64260
HEADHELP := direct.o misc-ev64260.o
TFTPIMAGE := /tftpboot/zImage.ev64260 TFTPIMAGE := /tftpboot/zImage.ev64260
endif endif
ifeq ($(CONFIG_GEMINI),y) ifeq ($(CONFIG_GEMINI),y)
ZIMAGE := zImage-SMON ZIMAGE := zImage-STRIPELF
ZIMAGEINITRD := zImage.initrd-SMON ZIMAGEINITRD := zImage.initrd-STRIPELF
HEADHELP := direct.o EXTRA := direct.o
TFTPIMAGE := /tftpboot/zImage.gemini END := gemini
TFTPIMAGE := /tftpboot/zImage.$(END)
endif endif
ifeq ($(CONFIG_MENF1),y) ifeq ($(CONFIG_MENF1),y)
ZIMAGE := zImage-MENF1 ZIMAGE := zImage-MENF1
ZIMAGEINITRD := zImage.initrd-MENF1 ZIMAGEINITRD := zImage.initrd-MENF1
HEADHELP := chrpmap.o EXTRA := chrpmap.o
TFTPIMAGE := /tftpboot/zImage.menf1 TFTPIMAGE := /tftpboot/zImage.menf1
endif endif
ifeq ($(CONFIG_K2),y) ifeq ($(CONFIG_K2),y)
ZIMAGE := zImage-K2 EXTRA := legacy.o
ZIMAGEINITRD := zImage.initrd-K2
HEADHELP := legacy.o
TFTPIMAGE := /tftpboot/zImage.k2 TFTPIMAGE := /tftpboot/zImage.k2
endif endif
# kbuild-2.4 'feature', only one of these will ever by 'y' at a time. # kbuild-2.4 'feature', only one of these will ever by 'y' at a time.
...@@ -58,45 +64,50 @@ endif ...@@ -58,45 +64,50 @@ endif
ifeq ($(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750)$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS),y) ifeq ($(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750)$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS),y)
ZIMAGE := zImage-PPLUS ZIMAGE := zImage-PPLUS
ZIMAGEINITRD := zImage.initrd-PPLUS ZIMAGEINITRD := zImage.initrd-PPLUS
HEADHELP := direct.o EXTRA := direct.o
TFTPIMAGE := /tftpboot/zImage.pplus TFTPIMAGE := /tftpboot/zImage.pplus
ZNETBOOT := zImage.pplus ZNETBOOT := zImage.pplus
ZNETBOOTRD := zImage.initrd.pplus ZNETBOOTRD := zImage.initrd.pplus
endif endif
ifeq ($(CONFIG_PPLUS),y) ifeq ($(CONFIG_PPLUS),y)
HEADHELP := legacy.o EXTRA := legacy.o
endif
ifeq ($(CONFIG_LOPEC),y)
EXTRA += ../common/mpc10x_memory.o
endif
ifeq ($(CONFIG_PAL4),y)
EXTRA := direct.o ../common/cpc700_memory.o
endif endif
ifeq ($(CONFIG_PCORE),y) ifeq ($(CONFIG_PCORE)$(CONFIG_POWERPMC250),y)
ZIMAGE := zImage-PCORE ZIMAGE := zImage-STRIPELF
ZIMAGEINITRD := zImage.initrd-PCORE ZIMAGEINITRD := zImage.initrd-STRIPELF
HEADHELP := chrpmap.o EXTRA := chrpmap.o
TFTPIMAGE := /tftpboot/zImage.pcore END := pcore
TFTPIMAGE := /tftpboot/zImage.$(END)
endif endif
#Ugh, should come up with a better nameing convention.. # The PowerPMC 250 needs the dummy serial_fixups()
ifeq ($(CONFIG_POWERPMC250),y) ifeq ($(CONFIG_POWERPMC250),y)
ZIMAGE := zImage-PCORE EXTRA := direct.o
ZIMAGEINITRD := zImage.initrd-PCORE
HEADHELP := direct.o
TFTPIMAGE := /tftpboot/zImage.pcore
endif endif
ifeq ($(CONFIG_SANDPOINT),y) ifeq ($(CONFIG_SANDPOINT),y)
ZIMAGE := zImage-SP EXTRA := direct.o
ZIMAGEINITRD := zImage.initrd-SP
HEADHELP := direct.o
TFTPIMAGE := /tftpboot/zImage.sandpoint TFTPIMAGE := /tftpboot/zImage.sandpoint
endif endif
ifeq ($(CONFIG_SPRUCE),y) ifeq ($(CONFIG_SPRUCE),y)
ZIMAGE := zImage-SPRUCE ZIMAGE := zImage-TREE
ZIMAGEINITRD := zImage.initrd-SPRUCE ZIMAGEINITRD := zImage.initrd-TREE
HEADHELP := direct.o EXTRA := direct.o
END := spruce
ENTRYPOINT := 0x00800000
MISC := misc-spruce.o MISC := misc-spruce.o
TFTPIMAGE := /tftpboot/zImage.spruce TFTPIMAGE := /tftpboot/zImage.$(END)
endif endif
ifeq ($(CONFIG_ZX4500),y) ifeq ($(CONFIG_ZX4500),y)
ZIMAGE := zImage-ZX4500 ZIMAGE := zImage-STRIPELF
ZIMAGEINITRD := zImage.initrd-ZX4500 ZIMAGEINITRD := zImage.initrd-STRIPELF
HEADHELP := direct.o EXTRA := direct.o
TFTPIMAGE := /tftpboot/zImage.zx4500 END := zx4500
TFTPIMAGE := /tftpboot/zImage.$(END)
endif endif
ifeq ($(CONFIG_SMP),y) ifeq ($(CONFIG_SMP),y)
TFTPIMAGE += .smp TFTPIMAGE += .smp
...@@ -105,7 +116,7 @@ ifeq ($(CONFIG_REDWOOD_4),y) ...@@ -105,7 +116,7 @@ ifeq ($(CONFIG_REDWOOD_4),y)
# This is a treeboot that needs init functions until the # This is a treeboot that needs init functions until the
# boot rom is sorted out (i.e. this is short lived) # boot rom is sorted out (i.e. this is short lived)
EXTRA_AFLAGS := -Wa,-m405 EXTRA_AFLAGS := -Wa,-m405
HEADHELP := rw4/rw4_init.o rw4/rw4_init_brd.o EXTRA := rw4/rw4_init.o rw4/rw4_init_brd.o
endif endif
# Default linker args. Link at 0x00800000 or 0x00400000 by default, but # Default linker args. Link at 0x00800000 or 0x00400000 by default, but
...@@ -122,7 +133,7 @@ endif ...@@ -122,7 +133,7 @@ endif
OBJCOPY_ARGS := -O elf32-powerpc OBJCOPY_ARGS := -O elf32-powerpc
# head.o and ../common/relocate.o must be at the start. # head.o and ../common/relocate.o must be at the start.
boot-y := head.o ../common/relocate.o $(HEADHELP) \ boot-y := head.o ../common/relocate.o $(EXTRA) \
$(MISC) ../common/misc-common.o \ $(MISC) ../common/misc-common.o \
../common/string.o ../common/util.o ../common/string.o ../common/util.o
boot-$(CONFIG_4xx) += embed_config.o boot-$(CONFIG_4xx) += embed_config.o
...@@ -170,9 +181,12 @@ zvmlinux.initrd: $(boot-y) $(LIBS) ../ld.script ../images/vmlinux.gz \ ...@@ -170,9 +181,12 @@ zvmlinux.initrd: $(boot-y) $(LIBS) ../ld.script ../images/vmlinux.gz \
-R .sysmap -R .sysmap
# Sort-of dummy rules, that let us format the image we want. # Sort-of dummy rules, that let us format the image we want.
zImage: $(ZIMAGE) zImage: $(ZIMAGE) zvmlinux
cp -f zvmlinux ../images/zImage.elf
rm -f zvmlinux rm -f zvmlinux
zImage.initrd: $(ZIMAGEINITRD)
zImage.initrd: $(ZIMAGEINITRD) zvmlinux.initrd
cp -f zvmlinux.initrd ../images/zImage.initrd.elf
rm -f zvmlinux.initrd rm -f zvmlinux.initrd
znetboot: zImage znetboot: zImage
...@@ -189,23 +203,17 @@ else ...@@ -189,23 +203,17 @@ else
cp ../images/zImage.* $(TFTPIMAGE) cp ../images/zImage.* $(TFTPIMAGE)
endif endif
zImage-EMBEDDED: zvmlinux zImage-STRIPELF: zvmlinux
mv zvmlinux ../images/zImage.embedded dd if=zvmlinux of=../images/zImage.$(END) skip=64 bs=1k
zImage.initrd-EMBEDDED: zvmlinux.initrd zImage.initrd-STRIPELF: zvmlinux.initrd
mv zvmlinux.initrd ../images/zImage.initrd.embedded dd if=zvmlinux.initrd of=../images/zImage.initrd.$(END) skip=64 bs=1k
zImage-K2: zvmlinux zImage-TREE: zvmlinux
mv zvmlinux ../images/zImage.k2 $(MKTREE) zvmlinux ../images/zImage.$(END) $(ENTRYPOINT)
zImage.initrd-K2: zvmlinux.initrd
mv zvmlinux.initrd ../images/zImage.initrd.k2
zImage-EV64260: zvmlinux
mv zvmlinux ../images/zImage.ev64260
zImage.initrd-EV64260: zvmlinux.initrd zImage.initrd-TREE: zvmlinux.initrd
mv zvmlinux.initrd ../images/zImage.initrd.ev64260 $(MKTREE) zvmlinux.initrd ../images/zImage.initrd.$(END) $(ENTRYPOINT)
zImage-MENF1: zvmlinux zImage-MENF1: zvmlinux
$(MKPREP) -pbp zvmlinux ../images/zImage.menf1 $(MKPREP) -pbp zvmlinux ../images/zImage.menf1
...@@ -213,12 +221,6 @@ zImage-MENF1: zvmlinux ...@@ -213,12 +221,6 @@ zImage-MENF1: zvmlinux
zImage.initrd-MENF1: zvmlinux.initrd zImage.initrd-MENF1: zvmlinux.initrd
$(MKPREP) -pbp zvmlinux.initrd ../images/zImage.initrd.menf1 $(MKPREP) -pbp zvmlinux.initrd ../images/zImage.initrd.menf1
zImage-PCORE: zvmlinux
dd if=zvmlinux of=../images/zImage.pcore skip=64 bs=1k
zImage.initrd-PCORE: zvmlinux.initrd
dd if=zvmlinux.initrd of=../images/zImage.initrd.pcore skip=64 bs=1k
zImage-PPLUS: zvmlinux $(MKPREP) $(MKBUGBOOT) zImage-PPLUS: zvmlinux $(MKPREP) $(MKBUGBOOT)
$(MKPREP) -pbp zvmlinux ../images/zImage.pplus $(MKPREP) -pbp zvmlinux ../images/zImage.pplus
$(MKBUGBOOT) zvmlinux ../images/zImage.bugboot $(MKBUGBOOT) zvmlinux ../images/zImage.bugboot
...@@ -227,34 +229,4 @@ zImage.initrd-PPLUS: zvmlinux.initrd $(MKPREP) $(MKBUGBOOT) ...@@ -227,34 +229,4 @@ zImage.initrd-PPLUS: zvmlinux.initrd $(MKPREP) $(MKBUGBOOT)
$(MKPREP) -pbp zvmlinux.initrd ../images/zImage.initrd.pplus $(MKPREP) -pbp zvmlinux.initrd ../images/zImage.initrd.pplus
$(MKBUGBOOT) zvmlinux.initrd ../images/zImage.initrd.bugboot $(MKBUGBOOT) zvmlinux.initrd ../images/zImage.initrd.bugboot
zImage-SMON: zvmlinux
dd if=zvmlinux of=../images/zImage.gemini skip=64 bs=1k
zImage.initrd-SMON: zvmlinux.initrd
dd if=zvmlinux.initrd of=../images/zImage.initrd.gemini skip=64 bs=1k
zImage-SP: zvmlinux
mv zvmlinux ../images/zImage.sandpoint
zImage.initrd-SP: zvmlinux.initrd
mv zvmlinux.initrd ../images/zImage.initrd.sandpoint
zImage-SPRUCE: zvmlinux
$(MKTREE) zvmlinux ../images/zImage.spruce 0x800000
zImage.initrd-SPRUCE: zvmlinux.initrd
$(MKTREE) zvmlinux.initrd ../images/zImage.initrd.spruce 0x800000
zImage-TREE: zvmlinux
$(MKTREE) zvmlinux ../images/zImage.treeboot
zImage.initrd-TREE: zvmlinux.initrd
$(MKTREE) zvmlinux.initrd ../images/zImage.initrd.treeboot
zImage-ZX4500: zvmlinux
dd if=zvmlinux of=../images/zImage.zx4500 skip=64 bs=1k
zImage.initrd-ZX4500: zvmlinux.initrd
dd if=zvmlinux.initrd of=../images/zImage.initrd.zx4500 skip=64 bs=1k
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
arch/ppc/boot/simple/embed_config.c
View file @ 037bd2fd
...@@ -10,7 +10,6 @@ ...@@ -10,7 +10,6 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/config.h> #include <linux/config.h>
#include <linux/string.h> #include <linux/string.h>
#include <asm/io.h>
#ifdef CONFIG_8xx #ifdef CONFIG_8xx
#include <asm/mpc8xx.h> #include <asm/mpc8xx.h>
#endif #endif
...@@ -18,6 +17,9 @@ ...@@ -18,6 +17,9 @@
#include <asm/mpc8260.h> #include <asm/mpc8260.h>
#include <asm/immap_8260.h> #include <asm/immap_8260.h>
#endif #endif
#ifdef CONFIG_40x
#include <asm/io.h>
#endif
/* For those boards that don't provide one. /* For those boards that don't provide one.
*/ */
...@@ -653,15 +655,65 @@ embed_config(bd_t **bdp) ...@@ -653,15 +655,65 @@ embed_config(bd_t **bdp)
} }
#endif /* WILLOW */ #endif /* WILLOW */
#ifdef CONFIG_TREEBOOT void
embed_config(bd_t ** bdp)
{
static const unsigned long line_size = 32;
static const unsigned long congruence_classes = 256;
unsigned long addr;
u_char *cp;
int i;
bd_t *bd;
/*
* At one point, we were getting machine checks. Linux was not
* invalidating the data cache before it was enabled. The
* following code was added to do that. Soon after we had done
* that, we found the real reasons for the machine checks. I've
* run the kernel a few times with the following code
* temporarily removed without any apparent problems. However,
* I objdump'ed the kernel and boot code and found out that
* there were no other dccci's anywhere, so I put the code back
* in and have been reluctant to remove it. It seems safer to
* just leave it here.
*/
for (addr = 0;
addr < (congruence_classes * line_size); addr += line_size) {
__asm__("dccci 0,%0": :"b"(addr));
}
bd = &bdinfo;
*bdp = bd;
bd->bi_memsize = XPAR_DDR_0_SIZE;
bd->bi_intfreq = XPAR_CORE_CLOCK_FREQ_HZ;
bd->bi_busfreq = XPAR_PLB_CLOCK_FREQ_HZ;
}
#ifdef CONFIG_IBM_OPENBIOS
/* This could possibly work for all treeboot roms. /* This could possibly work for all treeboot roms.
*/ */
#if defined(CONFIG_ASH) #if defined(CONFIG_ASH) || defined(CONFIG_BEECH)
#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ #define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */
#else #else
#define BOARD_INFO_VECTOR 0xFFFE0B50 #define BOARD_INFO_VECTOR 0xFFFE0B50
#endif #endif
#ifdef CONFIG_BEECH
static void
get_board_info(bd_t **bdp)
{
typedef void (*PFV)(bd_t *bd);
((PFV)(*(unsigned long *)BOARD_INFO_VECTOR))(*bdp);
return;
}
void
embed_config(bd_t **bdp)
{
*bdp = &bdinfo;
get_board_info(bdp);
}
#else /* !CONFIG_BEECH */
void void
embed_config(bd_t **bdp) embed_config(bd_t **bdp)
{ {
...@@ -671,16 +723,13 @@ embed_config(bd_t **bdp) ...@@ -671,16 +723,13 @@ embed_config(bd_t **bdp)
bd_t *(*get_board_info)(void) = bd_t *(*get_board_info)(void) =
(bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); (bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
#if !defined(CONFIG_STB03xxx) #if !defined(CONFIG_STB03xxx)
volatile emac_t *emacp;
emacp = (emac_t *)EMAC0_BASE; /* assume 1st emac - armin */
/* shut down the Ethernet controller that the boot rom /* shut down the Ethernet controller that the boot rom
* sometimes leaves running. * sometimes leaves running.
*/ */
mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* 1st reset MAL */ mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* 1st reset MAL */
while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */ while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */
emacp->em0mr0 = 0x20000000; /* then reset EMAC */ out_be32(EMAC0_BASE,0x20000000); /* then reset EMAC */
eieio();
#endif #endif
bd = &bdinfo; bd = &bdinfo;
...@@ -711,14 +760,15 @@ embed_config(bd_t **bdp) ...@@ -711,14 +760,15 @@ embed_config(bd_t **bdp)
#endif #endif
} }
/* Yeah, this look weird, but on Redwood 4 they are /* Yeah, this look weird, but on Redwood 4 they are
* different object in the structure. When RW5 uses * different object in the structure. Sincr Redwwood 5
* OpenBIOS, it requires a special value. * and Redwood 6 use OpenBIOS, it requires a special value.
*/ */
#ifdef CONFIG_REDWOOD_5 #if defined(CONFIG_REDWOOD_5) || defined (CONFIG_REDWOOD_6)
bd->bi_tbfreq = 27 * 1000 * 1000; bd->bi_tbfreq = 27 * 1000 * 1000;
#endif #endif
} }
#endif #endif /* CONFIG_BEECH */
#endif /* CONFIG_IBM_OPENBIOS */
#ifdef CONFIG_EP405 #ifdef CONFIG_EP405
#include <linux/serial_reg.h> #include <linux/serial_reg.h>
...@@ -745,6 +795,14 @@ embed_config(bd_t **bdp) ...@@ -745,6 +795,14 @@ embed_config(bd_t **bdp)
writeb(0, UART0_IO_BASE + UART_LCR); writeb(0, UART0_IO_BASE + UART_LCR);
} }
/* We haven't seen actual problems with the EP405 leaving the
* EMAC running (as we have on Walnut). But the registers
* suggest it may not be left completely quiescent. Reset it
* just to be sure. */
mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* 1st reset MAL */
while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */
out_be32(EMAC0_BASE,0x20000000); /* then reset EMAC */
bd = &bdinfo; bd = &bdinfo;
*bdp = bd; *bdp = bd;
#if 1 #if 1
...@@ -804,6 +862,16 @@ embed_config(bd_t **bdp) ...@@ -804,6 +862,16 @@ embed_config(bd_t **bdp)
bd = &bdinfo; bd = &bdinfo;
*bdp = bd; *bdp = bd;
for(i=0;i<8192;i+=32) {
__asm__("dccci 0,%0" :: "r" (i));
}
__asm__("iccci 0,0");
__asm__("sync;isync");
/* init ram for parity */
memset(0, 0,0x400000); /* Lo memory */
bd->bi_memsize = (32 * 1024 * 1024) ; bd->bi_memsize = (32 * 1024 * 1024) ;
bd->bi_intfreq = 133000000; //the internal clock is 133 MHz bd->bi_intfreq = 133000000; //the internal clock is 133 MHz
......
arch/ppc/boot/simple/head.S
View file @ 037bd2fd
...@@ -37,7 +37,7 @@ ...@@ -37,7 +37,7 @@
.globl start .globl start
start: start:
bl start_ bl start_
#ifdef CONFIG_TREEBOOT #ifdef CONFIG_IBM_OPENBIOS
/* The IBM "Tree" bootrom knows that the address of the bootrom /* The IBM "Tree" bootrom knows that the address of the bootrom
* read only structure is 4 bytes after _start. * read only structure is 4 bytes after _start.
*/ */
...@@ -73,7 +73,8 @@ start_: ...@@ -73,7 +73,8 @@ start_:
#ifdef CONFIG_6xx #ifdef CONFIG_6xx
bl disable_6xx_mmu bl disable_6xx_mmu
bl disable_6xx_l1cache bl disable_6xx_l1cache
#if defined(CONFIG_FORCE) || defined(CONFIG_K2) || defined(CONFIG_EV64260) #if defined(CONFIG_FORCE) || defined(CONFIG_K2) \
|| defined(CONFIG_EV64260) || defined(CONFIG_PAL4)
bl _setup_L2CR bl _setup_L2CR
#endif #endif
#endif #endif
......
arch/ppc/boot/simple/misc-embedded.c
View file @ 037bd2fd
...@@ -80,7 +80,7 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum, b ...@@ -80,7 +80,7 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum, b
* initialize the serial console port. * initialize the serial console port.
*/ */
embed_config(&bp); embed_config(&bp);
#ifdef CONFIG_SERIAL_CONSOLE #if defined(CONFIG_SERIAL_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
com_port = serial_init(0, bp); com_port = serial_init(0, bp);
#endif #endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7