Commit 03a67279 authored by John Horan's avatar John Horan Committed by Mauro Carvalho Chehab

[media] media: dvb-frontends: ts2020: Added in a option for frequency divider...

[media] media: dvb-frontends: ts2020: Added in a option for frequency divider value for s600 devices

When the tuner part of the ds3000 driver was split to share code with the m88rs2000 driver, the ts2020 driver used
the frequency divider value from the m88rs2000 driver.  However the ds3000 driver requires a different value, and this
resulted in some frequecies being invisible to the tuner.  This patch adds back in the value needed for the ds3000 driver
and configured as an option in the dw2102 frontend driver.
It may also apply to su3000 devices, which use the same ds3000 driver, but for now it is only applied to the s660 device.
Signed-off-by: default avatarJohn Horan <knasher@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent d7f74c03
......@@ -31,6 +31,7 @@ struct ts2020_priv {
struct i2c_adapter *i2c;
u8 clk_out_div;
u32 frequency;
u32 frequency_div;
};
static int ts2020_release(struct dvb_frontend *fe)
......@@ -193,7 +194,7 @@ static int ts2020_set_params(struct dvb_frontend *fe)
u8 lo = 0x01, div4 = 0x0;
/* Calculate frequency divider */
if (frequency < 1060000) {
if (frequency < priv->frequency_div) {
lo |= 0x10;
div4 = 0x1;
ndiv = (frequency * 14 * 4) / TS2020_XTAL_FREQ;
......@@ -340,6 +341,7 @@ struct dvb_frontend *ts2020_attach(struct dvb_frontend *fe,
priv->i2c_address = config->tuner_address;
priv->i2c = i2c;
priv->clk_out_div = config->clk_out_div;
priv->frequency_div = config->frequency_div;
fe->tuner_priv = priv;
/* Wake Up the tuner */
......
......@@ -28,6 +28,7 @@
struct ts2020_config {
u8 tuner_address;
u8 clk_out_div;
u32 frequency_div;
};
#if IS_ENABLED(CONFIG_DVB_TS2020)
......
......@@ -955,9 +955,10 @@ static struct ds3000_config dw2104_ds3000_config = {
.demod_address = 0x68,
};
static struct ts2020_config dw2104_ts2020_config = {
static struct ts2020_config dw2104_ts2020_config = {
.tuner_address = 0x60,
.clk_out_div = 1,
.frequency_div = 1060000,
};
static struct ds3000_config s660_ds3000_config = {
......@@ -966,6 +967,12 @@ static struct ds3000_config s660_ds3000_config = {
.set_lock_led = dw210x_led_ctrl,
};
static struct ts2020_config s660_ts2020_config = {
.tuner_address = 0x60,
.clk_out_div = 1,
.frequency_div = 1146000,
};
static struct stv0900_config dw2104a_stv0900_config = {
.demod_address = 0x6a,
.demod_mode = 0,
......@@ -1205,7 +1212,7 @@ static int ds3000_frontend_attach(struct dvb_usb_adapter *d)
if (d->fe_adap[0].fe == NULL)
return -EIO;
dvb_attach(ts2020_attach, d->fe_adap[0].fe, &dw2104_ts2020_config,
dvb_attach(ts2020_attach, d->fe_adap[0].fe, &s660_ts2020_config,
&d->dev->i2c_adap);
st->old_set_voltage = d->fe_adap[0].fe->ops.set_voltage;
......@@ -1213,7 +1220,7 @@ static int ds3000_frontend_attach(struct dvb_usb_adapter *d)
dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG);
info("Attached ds3000+ds2020!\n");
info("Attached ds3000+ts2020!\n");
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment