Commit 04074f1f authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] saa7115: make multi-line comments compliant with CodingStyle

changeset 2ccf12af did a crappy job when added multi-line comment lines,
violating CodingStyle.

Change the comments added there to fulfill CodingStyle, and document
the platform_data using Documentation/kernel-doc-nano-HOWTO.txt.

Cc: Jon Arne Jørgensen <jonarne@jonarne.no>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent 2ccf12af
...@@ -225,12 +225,14 @@ static const unsigned char saa7111_init[] = { ...@@ -225,12 +225,14 @@ static const unsigned char saa7111_init[] = {
0x00, 0x00 0x00, 0x00
}; };
/* This table has one illegal value, and some values that are not /*
correct according to the datasheet initialization table. * This table has one illegal value, and some values that are not
* correct according to the datasheet initialization table.
If you need a table with legal/default values tell the driver in *
i2c_board_info.platform_data, and you will get the gm7113c_init * If you need a table with legal/default values tell the driver in
table instead. */ * i2c_board_info.platform_data, and you will get the gm7113c_init
* table instead.
*/
/* SAA7113 Init codes */ /* SAA7113 Init codes */
static const unsigned char saa7113_init[] = { static const unsigned char saa7113_init[] = {
...@@ -265,10 +267,12 @@ static const unsigned char saa7113_init[] = { ...@@ -265,10 +267,12 @@ static const unsigned char saa7113_init[] = {
0x00, 0x00 0x00, 0x00
}; };
/* GM7113C is a clone of the SAA7113 chip /*
This init table is copied out of the saa7113 datasheet. * GM7113C is a clone of the SAA7113 chip
In R_08 we enable "Automatic Field Detection" [AUFD], * This init table is copied out of the saa7113 datasheet.
this is disabled when saa711x_set_v4lstd is called. */ * In R_08 we enable "Automatic Field Detection" [AUFD],
* this is disabled when saa711x_set_v4lstd is called.
*/
static const unsigned char gm7113c_init[] = { static const unsigned char gm7113c_init[] = {
R_01_INC_DELAY, 0x08, R_01_INC_DELAY, 0x08,
R_02_INPUT_CNTL_1, 0xc0, R_02_INPUT_CNTL_1, 0xc0,
......
...@@ -47,9 +47,11 @@ ...@@ -47,9 +47,11 @@
#define SAA7111_FMT_YUV411 0xc0 #define SAA7111_FMT_YUV411 0xc0
/* config flags */ /* config flags */
/* Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit /*
* Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit
* controls the IDQ signal polarity which is set to 'inverted' if the bit * controls the IDQ signal polarity which is set to 'inverted' if the bit
* it 1 and to 'default' if it is 0. */ * it 1 and to 'default' if it is 0.
*/
#define SAA7115_IDQ_IS_DEFAULT (1 << 0) #define SAA7115_IDQ_IS_DEFAULT (1 << 0)
/* s_crystal_freq values and flags */ /* s_crystal_freq values and flags */
...@@ -84,11 +86,13 @@ enum saa7113_r10_ofts { ...@@ -84,11 +86,13 @@ enum saa7113_r10_ofts {
SAA7113_OFTS_VFLAG_BY_DATA_TYPE SAA7113_OFTS_VFLAG_BY_DATA_TYPE
}; };
/* Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]: /*
* Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]:
* This is used to select what data is output on the RTS0 and RTS1 pins. * This is used to select what data is output on the RTS0 and RTS1 pins.
* RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0) * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0)
* RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified
* in the datasheet, but is set to HREF_HS in the saa7113_init table. */ * in the datasheet, but is set to HREF_HS in the saa7113_init table.
*/
enum saa7113_r12_rts { enum saa7113_r12_rts {
SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */ SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */
SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */ SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */
...@@ -108,24 +112,29 @@ enum saa7113_r12_rts { ...@@ -108,24 +112,29 @@ enum saa7113_r12_rts {
SAA7113_RTS_FID SAA7113_RTS_FID
}; };
/**
* struct saa7115_platform_data - Allow overriding default initialization
*
* @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table
* instead of saa7113_init table
* (saa7113 only)
* @saa7113_r08_htc: [R_08 - Bit 3..4]
* @saa7113_r10_vrln: [R_10 - Bit 3]
* default: Disabled for gm7113c_init
* Enabled for saa7113c_init
* @saa7113_r10_ofts: [R_10 - Bit 6..7]
* @saa7113_r12_rts0: [R_12 - Bit 0..3]
* @saa7113_r12_rts1: [R_12 - Bit 4..7]
* @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled
*/
struct saa7115_platform_data { struct saa7115_platform_data {
/* saa7113 only: Force the use of the gm7113c_init table,
* instead of the old saa7113_init table. */
bool saa7113_force_gm7113c_init; bool saa7113_force_gm7113c_init;
enum saa7113_r08_htc *saa7113_r08_htc;
/* SAA7113/GM7113C Specific configurations */ bool *saa7113_r10_vrln;
enum saa7113_r08_htc *saa7113_r08_htc; /* [R_08 - Bit 3..4] */ enum saa7113_r10_ofts *saa7113_r10_ofts;
enum saa7113_r12_rts *saa7113_r12_rts0;
bool *saa7113_r10_vrln; /* [R_10 - Bit 3] enum saa7113_r12_rts *saa7113_r12_rts1;
Disabled for gm7113c_init bool *saa7113_r13_adlsb;
Enabled for saa7113c_init */
enum saa7113_r10_ofts *saa7113_r10_ofts; /* [R_10 - Bit 6..7] */
enum saa7113_r12_rts *saa7113_r12_rts0; /* [R_12 - Bit 0..3] */
enum saa7113_r12_rts *saa7113_r12_rts1; /* [R_12 - Bit 4..7] */
bool *saa7113_r13_adlsb; /* [R_13 - Bit 7]
Default disabled */
}; };
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment