e1000/e1000e: Move PCI-Express device IDs over to e1000e

e1000e will from now on support the PCI-Express adapters that
previously were supported by e1000. This support means better
performance and easier debugging from now on for both the old
PCI-X/PCI hardware and PCI-Express adapters.

This patch also moves 3 recently merged device IDs over to e1000e
that are identical to quad-port versions of already existing
dual port versions. With this last bit every former e1000 pci-e
device should work now with e1000e.

Here is a brief list of which gigabit driver to use with which
adapter:

  e1000:
	82540 -> 82547

  e1000e:
	82571 -> 82573
	ich8, ich9       (82562 or 82566)
	es2lan           (80003eslan)

  igb: (not yet merged, only available from e1000.sf.net)
	82575
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/e1000/e1000_main.c

@@ -73,14 +73,6 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	INTEL_E1000_ETHERNET_DEVICE(0x1026),
 	INTEL_E1000_ETHERNET_DEVICE(0x1027),
 	INTEL_E1000_ETHERNET_DEVICE(0x1028),
-	INTEL_E1000_ETHERNET_DEVICE(0x1049),
-	INTEL_E1000_ETHERNET_DEVICE(0x104A),
-	INTEL_E1000_ETHERNET_DEVICE(0x104B),
-	INTEL_E1000_ETHERNET_DEVICE(0x104C),
-	INTEL_E1000_ETHERNET_DEVICE(0x104D),
-	INTEL_E1000_ETHERNET_DEVICE(0x105E),
-	INTEL_E1000_ETHERNET_DEVICE(0x105F),
-	INTEL_E1000_ETHERNET_DEVICE(0x1060),
 	INTEL_E1000_ETHERNET_DEVICE(0x1075),
 	INTEL_E1000_ETHERNET_DEVICE(0x1076),
 	INTEL_E1000_ETHERNET_DEVICE(0x1077),
@@ -89,28 +81,9 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	INTEL_E1000_ETHERNET_DEVICE(0x107A),
 	INTEL_E1000_ETHERNET_DEVICE(0x107B),
 	INTEL_E1000_ETHERNET_DEVICE(0x107C),
-	INTEL_E1000_ETHERNET_DEVICE(0x107D),
-	INTEL_E1000_ETHERNET_DEVICE(0x107E),
-	INTEL_E1000_ETHERNET_DEVICE(0x107F),
 	INTEL_E1000_ETHERNET_DEVICE(0x108A),
-	INTEL_E1000_ETHERNET_DEVICE(0x108B),
-	INTEL_E1000_ETHERNET_DEVICE(0x108C),
-	INTEL_E1000_ETHERNET_DEVICE(0x1096),
-	INTEL_E1000_ETHERNET_DEVICE(0x1098),
 	INTEL_E1000_ETHERNET_DEVICE(0x1099),
-	INTEL_E1000_ETHERNET_DEVICE(0x109A),
-	INTEL_E1000_ETHERNET_DEVICE(0x10A4),
-	INTEL_E1000_ETHERNET_DEVICE(0x10A5),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B5),
-	INTEL_E1000_ETHERNET_DEVICE(0x10B9),
-	INTEL_E1000_ETHERNET_DEVICE(0x10BA),
-	INTEL_E1000_ETHERNET_DEVICE(0x10BB),
-	INTEL_E1000_ETHERNET_DEVICE(0x10BC),
-	INTEL_E1000_ETHERNET_DEVICE(0x10C4),
-	INTEL_E1000_ETHERNET_DEVICE(0x10C5),
-	INTEL_E1000_ETHERNET_DEVICE(0x10D5),
-	INTEL_E1000_ETHERNET_DEVICE(0x10D9),
-	INTEL_E1000_ETHERNET_DEVICE(0x10DA),
 	/* required last entry */
 	{0,}
 };

drivers/net/e1000e/82571.c

@@ -194,6 +194,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 		break;
 	case E1000_DEV_ID_82571EB_SERDES:
 	case E1000_DEV_ID_82572EI_SERDES:
+	case E1000_DEV_ID_82571EB_SERDES_DUAL:
+	case E1000_DEV_ID_82571EB_SERDES_QUAD:
 		hw->media_type = e1000_media_type_internal_serdes;
 		break;
 	default:
@@ -260,6 +262,7 @@ static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter)
 	case E1000_DEV_ID_82571EB_QUAD_COPPER:
 	case E1000_DEV_ID_82571EB_QUAD_FIBER:
 	case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
+	case E1000_DEV_ID_82571PT_QUAD_COPPER:
 		adapter->flags |= FLAG_IS_QUAD_PORT;
 		/* mark the first port */
 		if (global_quad_port_a == 0)
@@ -285,6 +288,9 @@ static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter)
 		if (adapter->flags & FLAG_IS_QUAD_PORT &&
 		    (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
 			adapter->flags &= ~FLAG_HAS_WOL;
+		/* Does not support WoL on any port */
+		if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
+			adapter->flags &= ~FLAG_HAS_WOL;
 		break;
 
 	case e1000_82573:

drivers/net/e1000e/hw.h

@@ -303,8 +303,11 @@ enum e1e_registers {
 #define E1000_DEV_ID_82571EB_FIBER		0x105F
 #define E1000_DEV_ID_82571EB_SERDES		0x1060
 #define E1000_DEV_ID_82571EB_QUAD_COPPER	0x10A4
+#define E1000_DEV_ID_82571PT_QUAD_COPPER	0x10D5
 #define E1000_DEV_ID_82571EB_QUAD_FIBER		0x10A5
 #define E1000_DEV_ID_82571EB_QUAD_COPPER_LP	0x10BC
+#define E1000_DEV_ID_82571EB_SERDES_DUAL	0x10D9
+#define E1000_DEV_ID_82571EB_SERDES_QUAD	0x10DA
 #define E1000_DEV_ID_82572EI_COPPER		0x107D
 #define E1000_DEV_ID_82572EI_FIBER		0x107E
 #define E1000_DEV_ID_82572EI_SERDES		0x107F

drivers/net/e1000e/netdev.c

@@ -4086,16 +4086,15 @@ static struct pci_error_handlers e1000_err_handler = {
 };
 
 static struct pci_device_id e1000_pci_tbl[] = {
-	/*
-	 * Support for 82571/2/3, es2lan and ich8 will be phased in
-	 * stepwise.
-
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
@@ -4118,8 +4117,6 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
-	*/
-
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },