bnx2x: Created bnx2x_sp

Moved the HSI dependent slow path code to a separate file.
Currently it contains the implementation of MACs, Rx mode,
multicast addresses, indirection table, fast path queue and function
configuration code.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

drivers/net/bnx2x/Makefile

@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_BNX2X) += bnx2x.o
 
-bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o
+bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o

drivers/net/bnx2x/bnx2x.h

@@ -1482,10 +1482,11 @@ int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
 		  u32 data_hi, u32 data_lo, int common);
 
 /* Clears multicast and unicast list configuration in the chip. */
-void bnx2x_invalidate_e1_mc_list(struct bnx2x *bp);
-void bnx2x_invalidate_e1h_mc_list(struct bnx2x *bp);
 void bnx2x_invalidate_uc_list(struct bnx2x *bp);
 
+int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
+			     int *state_p, int flags);
+
 void bnx2x_update_coalesce(struct bnx2x *bp);
 int bnx2x_get_cur_phy_idx(struct bnx2x *bp);
 
@@ -1825,6 +1826,5 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 BNX2X_EXTERN int load_count[2][3]; /* per path: 0-common, 1-port0, 2-port1 */
 
 extern void bnx2x_set_ethtool_ops(struct net_device *netdev);
-void bnx2x_push_indir_table(struct bnx2x *bp);
 
 #endif /* bnx2x.h */

drivers/net/bnx2x/bnx2x_cmn.c

@@ -24,8 +24,8 @@
 #include <linux/firmware.h>
 #include <linux/prefetch.h>
 #include "bnx2x_cmn.h"
-
 #include "bnx2x_init.h"
+#include "bnx2x_sp.h"
 
 static int bnx2x_setup_irqs(struct bnx2x *bp);
 

drivers/net/bnx2x/bnx2x_cmn.h

@@ -292,13 +292,6 @@ int bnx2x_set_all_enode_macs(struct bnx2x *bp, int set);
  */
 void bnx2x_set_rx_mode(struct net_device *dev);
 
-/**
- * bnx2x_set_storm_rx_mode - configure MAC filtering rules in a FW.
- *
- * @bp:		driver handle
- */
-void bnx2x_set_storm_rx_mode(struct bnx2x *bp);
-
 /* Parity errors related */
 void bnx2x_inc_load_cnt(struct bnx2x *bp);
 u32 bnx2x_dec_load_cnt(struct bnx2x *bp);
@@ -1117,6 +1110,9 @@ static inline void storm_memset_cmng(struct bnx2x *bp,
 void bnx2x_acquire_phy_lock(struct bnx2x *bp);
 void bnx2x_release_phy_lock(struct bnx2x *bp);
 
+void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u16 fw_sb_id,
+					u8 sb_index, u8 disable, u16 usec);
+
 /**
  * bnx2x_extract_max_cfg - extract MAX BW part from MF configuration.
  *

drivers/net/bnx2x/bnx2x_ethtool.c

@@ -25,6 +25,7 @@
 #include "bnx2x_cmn.h"
 #include "bnx2x_dump.h"
 #include "bnx2x_init.h"
+#include "bnx2x_sp.h"
 
 /* Note: in the format strings below %s is replaced by the queue-name which is
  * either its index or 'fcoe' for the fcoe queue. Make sure the format string

drivers/net/bnx2x/bnx2x_sp.h

+#ifndef BNX2X_SP
+#define BNX2X_SP
+
+#include "bnx2x_reg.h"
+
+/* MAC configuration */
+void bnx2x_set_mac_addr_gen(struct bnx2x *bp, int set, const u8 *mac,
+			    u32 cl_bit_vec, u8 cam_offset,
+			    u8 is_bcast);
+
+/* Multicast */
+void bnx2x_invalidate_e1_mc_list(struct bnx2x *bp);
+void bnx2x_invalidate_e1h_mc_list(struct bnx2x *bp);
+int bnx2x_set_e1_mc_list(struct bnx2x *bp);
+int bnx2x_set_e1h_mc_list(struct bnx2x *bp);
+
+/* Rx mode */
+void bnx2x_set_storm_rx_mode(struct bnx2x *bp);
+void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters);
+
+/* RSS configuration */
+void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p);
+void bnx2x_push_indir_table(struct bnx2x *bp);
+
+/* Queue configuration */
+static inline void bnx2x_set_ctx_validation(struct eth_context *cxt, u32 cid)
+{
+	/* ustorm cxt validation */
+	cxt->ustorm_ag_context.cdu_usage =
+		CDU_RSRVD_VALUE_TYPE_A(cid, CDU_REGION_NUMBER_UCM_AG,
+				       ETH_CONNECTION_TYPE);
+	/* xcontext validation */
+	cxt->xstorm_ag_context.cdu_reserved =
+		CDU_RSRVD_VALUE_TYPE_A(cid, CDU_REGION_NUMBER_XCM_AG,
+				       ETH_CONNECTION_TYPE);
+}
+
+int bnx2x_setup_fw_client(struct bnx2x *bp,
+			  struct bnx2x_client_init_params *params,
+			  u8 activate,
+			  struct client_init_ramrod_data *data,
+			  dma_addr_t data_mapping);
+#endif /* BNX2X_SP */