Merge branch 'master' into next

Conflicts:
	security/keys/keyring.c

Resolved conflict with whitespace fix in find_keyring_by_name()
Signed-off-by: James Morris <jmorris@namei.org>

Documentation/DocBook/libata.tmpl

@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
 	issue of SET FEATURES - XFER MODE, and prior to operation.
 	</para>
 	<para>
-	Called by ata_device_add() after ata_dev_identify() determines
-	a device is present.
-	</para>
-	<para>
 	This entry may be specified as NULL in ata_port_operations.
 	</para>
 
@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
 
 	<sect2><title>Taskfile read/write</title>
 	<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	hardware registers / DMA buffers, to obtain the current set of
 	taskfile register values.
 	Most drivers for taskfile-based hardware (PIO or MMIO) use
-	ata_tf_load() and ata_tf_read() for these hooks.
+	ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
 	</para>
 
 	</sect2>
 
 	<sect2><title>PIO data read/write</title>
 	<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
 	</programlisting>
 
 	<para>
 All bmdma-style drivers must implement this hook.  This is the low-level
 operation that actually copies the data bytes during a PIO data
 transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
 	</para>
 
 	</sect2>
 
 	<sect2><title>ATA command execute</title>
 	<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
 	causes an ATA command, previously loaded with
 	->tf_load(), to be initiated in hardware.
-	Most drivers for taskfile-based hardware use ata_exec_command()
+	Most drivers for taskfile-based hardware use ata_sff_exec_command()
 	for this hook.
 	</para>
 
@@ -218,8 +213,8 @@ command.
 
 	<sect2><title>Read specific ATA shadow registers</title>
 	<programlisting>
-u8   (*check_status)(struct ata_port *ap);
-u8   (*check_altstatus)(struct ata_port *ap);
+u8   (*sff_check_status)(struct ata_port *ap);
+u8   (*sff_check_altstatus)(struct ata_port *ap);
 	</programlisting>
 
 	<para>
@@ -227,20 +222,14 @@ u8   (*check_altstatus)(struct ata_port *ap);
 	hardware.  On some hardware, reading the Status register has
 	the side effect of clearing the interrupt condition.
 	Most drivers for taskfile-based hardware use
-	ata_check_status() for this hook.
-	</para>
-	<para>
-	Note that because this is called from ata_device_add(), at
-	least a dummy function that clears device interrupts must be
-	provided for all drivers, even if the controller doesn't
-	actually have a taskfile status register.
+	ata_sff_check_status() for this hook.
 	</para>
 
 	</sect2>
 
 	<sect2><title>Select ATA device on bus</title>
 	<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
 	</programlisting>
 
 	<para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
 	</para>
 	<para>
 	Most drivers for taskfile-based hardware use
-	ata_std_dev_select() for this hook.  Controllers which do not
-	support second drives on a port (such as SATA contollers) will
-	use ata_noop_dev_select().
+	ata_sff_dev_select() for this hook.
 	</para>
 
 	</sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
 	to struct ata_host_set.
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_interrupt() for the
+	Most legacy IDE drivers use ata_sff_interrupt() for the
 	irq_handler hook, which scans all ports in the host_set,
 	determines which queued command was active (if any), and calls
-	ata_host_intr(ap,qc).
+	ata_sff_host_intr(ap,qc).
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+	Most legacy IDE drivers use ata_sff_irq_clear() for the
 	irq_clear() hook, which simply clears the interrupt and error
 	flags in the DMA status register.
 	</para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
 	data from port at this time.
 	</para>
 	<para>
-	Many drivers use ata_port_stop() as this hook, which frees the
-	PRD table.
-	</para>
-	<para>
 	->host_stop() is called after all ->port_stop() calls
 have completed.  The hook must finalize hardware shutdown, release DMA
 and other resources, etc.

Documentation/input/elantech.txt

@@ -333,14 +333,14 @@ byte 0:
 byte 1:
 
    bit   7   6   5   4   3   2   1   0
-        x15 x14 x13 x12 x11 x10 x9  x8
+         .   .   .   .   .  x10 x9  x8
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
         x7  x6  x5  x4  x4  x2  x1  x0
 
-         x15..x0 = absolute x value (horizontal)
+         x10..x0 = absolute x value (horizontal)
 
 byte 3:
 
@@ -350,14 +350,14 @@ byte 3:
 byte 4:
 
    bit   7   6   5   4   3   2   1   0
-        y15 y14 y13 y12 y11 y10 y8  y8
+         .   .   .   .   .   .  y9  y8
 
 byte 5:
 
    bit   7   6   5   4   3   2   1   0
         y7  y6  y5  y4  y3  y2  y1  y0
 
-         y15..y0 = absolute y value (vertical)
+         y9..y0 = absolute y value (vertical)
 
 
 4.2.2 Two finger touch

crypto/async_tx/async_raid6_recov.c

@@ -324,6 +324,7 @@ struct dma_async_tx_descriptor *
 async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
 			struct page **blocks, struct async_submit_ctl *submit)
 {
+	void *scribble = submit->scribble;
 	int non_zero_srcs, i;
 
 	BUG_ON(faila == failb);
@@ -332,11 +333,13 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
 
 	pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
 
-	/* we need to preserve the contents of 'blocks' for the async
-	 * case, so punt to synchronous if a scribble buffer is not available
+	/* if a dma resource is not available or a scribble buffer is not
+	 * available punt to the synchronous path.  In the 'dma not
+	 * available' case be sure to use the scribble buffer to
+	 * preserve the content of 'blocks' as the caller intended.
 	 */
-	if (!submit->scribble) {
-		void **ptrs = (void **) blocks;
+	if (!async_dma_find_channel(DMA_PQ) || !scribble) {
+		void **ptrs = scribble ? scribble : (void **) blocks;
 
 		async_tx_quiesce(&submit->depend_tx);
 		for (i = 0; i < disks; i++)
@@ -406,11 +409,13 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila,
 
 	pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
 
-	/* we need to preserve the contents of 'blocks' for the async
-	 * case, so punt to synchronous if a scribble buffer is not available
+	/* if a dma resource is not available or a scribble buffer is not
+	 * available punt to the synchronous path.  In the 'dma not
+	 * available' case be sure to use the scribble buffer to
+	 * preserve the content of 'blocks' as the caller intended.
 	 */
-	if (!scribble) {
-		void **ptrs = (void **) blocks;
+	if (!async_dma_find_channel(DMA_PQ) || !scribble) {
+		void **ptrs = scribble ? scribble : (void **) blocks;
 
 		async_tx_quiesce(&submit->depend_tx);
 		for (i = 0; i < disks; i++)

drivers/ata/pata_pcmcia.c

@@ -424,7 +424,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
-	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17),
+	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
@@ -446,7 +446,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),

drivers/ide/ide-cs.c

@@ -409,7 +409,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
-	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17),
+	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
@@ -431,7 +431,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),

drivers/input/joydev.c

@@ -929,6 +929,24 @@ static const struct input_device_id joydev_ids[] = {
 		.evbit = { BIT_MASK(EV_ABS) },
 		.absbit = { BIT_MASK(ABS_THROTTLE) },
 	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = {[BIT_WORD(BTN_JOYSTICK)] = BIT_MASK(BTN_JOYSTICK) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(BTN_GAMEPAD)] = BIT_MASK(BTN_GAMEPAD) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(BTN_TRIGGER_HAPPY)] = BIT_MASK(BTN_TRIGGER_HAPPY) },
+	},
 	{ }	/* Terminating entry */
 };
 

drivers/input/misc/ati_remote.c

@@ -98,10 +98,12 @@
  * Module and Version Information, Module Parameters
  */
 
-#define ATI_REMOTE_VENDOR_ID	0x0bc7
-#define ATI_REMOTE_PRODUCT_ID	0x004
-#define LOLA_REMOTE_PRODUCT_ID	0x002
-#define MEDION_REMOTE_PRODUCT_ID 0x006
+#define ATI_REMOTE_VENDOR_ID		0x0bc7
+#define LOLA_REMOTE_PRODUCT_ID		0x0002
+#define LOLA2_REMOTE_PRODUCT_ID		0x0003
+#define ATI_REMOTE_PRODUCT_ID		0x0004
+#define NVIDIA_REMOTE_PRODUCT_ID	0x0005
+#define MEDION_REMOTE_PRODUCT_ID	0x0006
 
 #define DRIVER_VERSION	        "2.2.1"
 #define DRIVER_AUTHOR           "Torrey Hoffman <thoffman@arnor.net>"
@@ -142,8 +144,10 @@ MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec
 #define err(format, arg...) printk(KERN_ERR format , ## arg)
 
 static struct usb_device_id ati_remote_table[] = {
-	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
 	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) },
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) },
 	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
 	{}	/* Terminating entry */
 };

drivers/input/mouse/alps.c

@@ -64,7 +64,6 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
-	{ { 0x73, 0x02, 0x64 }, 0xf8, 0xf8, 0 },			  /* HP Pavilion dm3 */
 	{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },	  /* Toshiba Tecra A11-11L */
 };

drivers/input/mouse/elantech.c

@@ -25,6 +25,10 @@
 			printk(KERN_DEBUG format, ##arg);	\
 	} while (0)
 
+static bool force_elantech;
+module_param_named(force_elantech, force_elantech, bool, 0644);
+MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default).");
+
 /*
  * Send a Synaptics style sliced query command
  */
@@ -182,13 +186,17 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 	static int old_fingers;
 
 	if (etd->fw_version_maj == 0x01) {
-		/* byte 0:  D   U  p1  p2   1  p3   R   L
-		   byte 1:  f   0  th  tw  x9  x8  y9  y8 */
+		/*
+		 * byte 0:  D   U  p1  p2   1  p3   R   L
+		 * byte 1:  f   0  th  tw  x9  x8  y9  y8
+		 */
 		fingers = ((packet[1] & 0x80) >> 7) +
 				((packet[1] & 0x30) >> 4);
 	} else {
-		/* byte 0: n1  n0  p2  p1   1  p3   R   L
-		   byte 1:  0   0   0   0  x9  x8  y9  y8 */
+		/*
+		 * byte 0: n1  n0  p2  p1   1  p3   R   L
+		 * byte 1:  0   0   0   0  x9  x8  y9  y8
+		 */
 		fingers = (packet[0] & 0xc0) >> 6;
 	}
 
@@ -202,13 +210,15 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 
 	input_report_key(dev, BTN_TOUCH, fingers != 0);
 
-	/* byte 2: x7  x6  x5  x4  x3  x2  x1  x0
-	   byte 3: y7  y6  y5  y4  y3  y2  y1  y0 */
+	/*
+	 * byte 2: x7  x6  x5  x4  x3  x2  x1  x0
+	 * byte 3: y7  y6  y5  y4  y3  y2  y1  y0
+	 */
 	if (fingers) {
 		input_report_abs(dev, ABS_X,
 			((packet[1] & 0x0c) << 6) | packet[2]);
-		input_report_abs(dev, ABS_Y, ETP_YMAX_V1 -
-			(((packet[1] & 0x03) << 8) | packet[3]));
+		input_report_abs(dev, ABS_Y,
+			ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3]));
 	}
 
 	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
@@ -247,34 +257,47 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
 
 	switch (fingers) {
 	case 1:
-		/* byte 1: x15 x14 x13 x12 x11 x10 x9  x8
-		   byte 2: x7  x6  x5  x4  x4  x2  x1  x0 */
-		input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]);
-		/* byte 4: y15 y14 y13 y12 y11 y10 y8  y8
-		   byte 5: y7  y6  y5  y4  y3  y2  y1  y0 */
-		input_report_abs(dev, ABS_Y, ETP_YMAX_V2 -
-			((packet[4] << 8) | packet[5]));
+		/*
+		 * byte 1:  .   .   .   .   .  x10 x9  x8
+		 * byte 2: x7  x6  x5  x4  x4  x2  x1  x0
+		 */
+		input_report_abs(dev, ABS_X,
+			((packet[1] & 0x07) << 8) | packet[2]);
+		/*
+		 * byte 4:  .   .   .   .   .   .  y9  y8
+		 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
+		 */
+		input_report_abs(dev, ABS_Y,
+			ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]));
 		break;
 
 	case 2:
-		/* The coordinate of each finger is reported separately with
-		   a lower resolution for two finger touches */
-		/* byte 0:  .   .  ay8 ax8  .   .   .   .
-		   byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */
+		/*
+		 * The coordinate of each finger is reported separately
+		 * with a lower resolution for two finger touches:
+		 * byte 0:  .   .  ay8 ax8  .   .   .   .
+		 * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+		 */
 		x1 = ((packet[0] & 0x10) << 4) | packet[1];
 		/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
 		y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
-		/* byte 3:  .   .  by8 bx8  .   .   .   .
-		   byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */
+		/*
+		 * byte 3:  .   .  by8 bx8  .   .   .   .
+		 * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
+		 */
 		x2 = ((packet[3] & 0x10) << 4) | packet[4];
 		/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
 		y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
-		/* For compatibility with the X Synaptics driver scale up one
-		   coordinate and report as ordinary mouse movent */
+		/*
+		 * For compatibility with the X Synaptics driver scale up
+		 * one coordinate and report as ordinary mouse movent
+		 */
 		input_report_abs(dev, ABS_X, x1 << 2);
 		input_report_abs(dev, ABS_Y, y1 << 2);
-		/* For compatibility with the proprietary X Elantech driver
-		   report both coordinates as hat coordinates */
+		/*
+		 * For compatibility with the proprietary X Elantech driver
+		 * report both coordinates as hat coordinates
+		 */
 		input_report_abs(dev, ABS_HAT0X, x1);
 		input_report_abs(dev, ABS_HAT0Y, y1);
 		input_report_abs(dev, ABS_HAT1X, x2);
@@ -596,8 +619,12 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
 		 param[0], param[1], param[2]);
 
 	if (param[0] == 0 || param[1] != 0) {
-		pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
-		return -1;
+		if (!force_elantech) {
+			pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
+			return -1;
+		}
+
+		pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
 	}
 
 	if (set_properties) {
@@ -666,7 +693,8 @@ int elantech_init(struct psmouse *psmouse)
 	 * Assume every version greater than this is new EeePC style
 	 * hardware with 6 byte packets
 	 */
-	if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) {
+	if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) ||
+	    etd->fw_version_maj > 0x02) {
 		etd->hw_version = 2;
 		/* For now show extra debug information */
 		etd->debug = 1;

drivers/input/mouse/psmouse-base.c

@@ -110,6 +110,7 @@ static struct workqueue_struct *kpsmoused_wq;
 struct psmouse_protocol {
 	enum psmouse_type type;
 	bool maxproto;
+	bool ignore_parity; /* Protocol should ignore parity errors from KBC */
 	const char *name;
 	const char *alias;
 	int (*detect)(struct psmouse *, bool);
@@ -288,7 +289,9 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
 	if (psmouse->state == PSMOUSE_IGNORE)
 		goto out;
 
-	if (flags & (SERIO_PARITY|SERIO_TIMEOUT)) {
+	if (unlikely((flags & SERIO_TIMEOUT) ||
+		     ((flags & SERIO_PARITY) && !psmouse->ignore_parity))) {
+
 		if (psmouse->state == PSMOUSE_ACTIVATED)
 			printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n",
 				flags & SERIO_TIMEOUT ? " timeout" : "",
@@ -759,6 +762,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.name		= "PS/2",
 		.alias		= "bare",
 		.maxproto	= true,
+		.ignore_parity	= true,
 		.detect		= ps2bare_detect,
 	},
 #ifdef CONFIG_MOUSE_PS2_LOGIPS2PP
@@ -786,6 +790,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.name		= "ImPS/2",
 		.alias		= "imps",
 		.maxproto	= true,
+		.ignore_parity	= true,
 		.detect		= intellimouse_detect,
 	},
 	{
@@ -793,6 +798,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.name		= "ImExPS/2",
 		.alias		= "exps",
 		.maxproto	= true,
+		.ignore_parity	= true,
 		.detect		= im_explorer_detect,
 	},
 #ifdef CONFIG_MOUSE_PS2_SYNAPTICS
@@ -1222,6 +1228,7 @@ static void psmouse_disconnect(struct serio *serio)
 static int psmouse_switch_protocol(struct psmouse *psmouse,
 				   const struct psmouse_protocol *proto)
 {
+	const struct psmouse_protocol *selected_proto;
 	struct input_dev *input_dev = psmouse->dev;
 
 	input_dev->dev.parent = &psmouse->ps2dev.serio->dev;
@@ -1245,9 +1252,14 @@ static int psmouse_switch_protocol(struct psmouse *psmouse,
 			return -1;
 
 		psmouse->type = proto->type;
-	} else
+		selected_proto = proto;
+	} else {
 		psmouse->type = psmouse_extensions(psmouse,
 						   psmouse_max_proto, true);
+		selected_proto = psmouse_protocol_by_type(psmouse->type);
+	}
+
+	psmouse->ignore_parity = selected_proto->ignore_parity;
 
 	/*
 	 * If mouse's packet size is 3 there is no point in polling the
@@ -1267,7 +1279,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse,
 		psmouse->resync_time = 0;
 
 	snprintf(psmouse->devname, sizeof(psmouse->devname), "%s %s %s",
-		 psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name);
+		 selected_proto->name, psmouse->vendor, psmouse->name);
 
 	input_dev->name = psmouse->devname;
 	input_dev->phys = psmouse->phys;

drivers/input/mouse/psmouse.h

@@ -47,6 +47,7 @@ struct psmouse {
 	unsigned char pktcnt;
 	unsigned char pktsize;
 	unsigned char type;
+	bool ignore_parity;
 	bool acks_disable_command;
 	unsigned int model;
 	unsigned long last;

drivers/input/mouse/synaptics.c

@@ -137,7 +137,8 @@ static int synaptics_capability(struct psmouse *psmouse)
 	if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap))
 		return -1;
 	priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
-	priv->ext_cap = 0;
+	priv->ext_cap = priv->ext_cap_0c = 0;
+
 	if (!SYN_CAP_VALID(priv->capabilities))
 		return -1;
 
@@ -150,7 +151,7 @@ static int synaptics_capability(struct psmouse *psmouse)
 	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) {
 		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) {
 			printk(KERN_ERR "Synaptics claims to have extended capabilities,"
-			       " but I'm not able to read them.");
+			       " but I'm not able to read them.\n");
 		} else {
 			priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2];
 
@@ -162,6 +163,16 @@ static int synaptics_capability(struct psmouse *psmouse)
 				priv->ext_cap &= 0xff0fff;
 		}
 	}
+
+	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
+		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
+			printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
+			       " but I'm not able to read it.\n");
+		} else {
+			priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
+		}
+	}
+
 	return 0;
 }
 
@@ -348,7 +359,15 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
-		if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
+		if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+			/*
+			 * Clickpad's button is transmitted as middle button,
+			 * however, since it is primary button, we will report
+			 * it as BTN_LEFT.
+			 */
+			hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
+
+		} else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
 			hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
 			if (hw->w == 2)
 				hw->scroll = (signed char)(buf[1]);
@@ -593,6 +612,12 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 
 	dev->absres[ABS_X] = priv->x_res;
 	dev->absres[ABS_Y] = priv->y_res;
+
+	if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+		/* Clickpads report only left button */
+		__clear_bit(BTN_RIGHT, dev->keybit);
+		__clear_bit(BTN_MIDDLE, dev->keybit);
+	}
 }
 
 static void synaptics_disconnect(struct psmouse *psmouse)
@@ -697,10 +722,10 @@ int synaptics_init(struct psmouse *psmouse)
 
 	priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
 
-	printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n",
+	printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
 		SYN_ID_MODEL(priv->identity),
 		SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
-		priv->model_id, priv->capabilities, priv->ext_cap);
+		priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
 
 	set_input_params(psmouse->dev, priv);
 

drivers/input/mouse/synaptics.h

@@ -18,6 +18,7 @@
 #define SYN_QUE_SERIAL_NUMBER_SUFFIX	0x07
 #define SYN_QUE_RESOLUTION		0x08
 #define SYN_QUE_EXT_CAPAB		0x09
+#define SYN_QUE_EXT_CAPAB_0C		0x0c
 
 /* synatics modes */
 #define SYN_BIT_ABSOLUTE_MODE		(1 << 7)
@@ -48,6 +49,8 @@
 #define SYN_CAP_VALID(c)		((((c) & 0x00ff00) >> 8) == 0x47)
 #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
+#define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
+#define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100100)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -96,6 +99,7 @@ struct synaptics_data {
 	unsigned long int model_id;		/* Model-ID */
 	unsigned long int capabilities;		/* Capabilities */
 	unsigned long int ext_cap;		/* Extended Capabilities */
+	unsigned long int ext_cap_0c;		/* Ext Caps from 0x0c query */
 	unsigned long int identity;		/* Identification */
 	int x_res;				/* X resolution in units/mm */
 	int y_res;				/* Y resolution in units/mm */

drivers/input/touchscreen/eeti_ts.c

@@ -124,14 +124,25 @@ static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int eeti_ts_open(struct input_dev *dev)
+static void eeti_ts_start(struct eeti_ts_priv *priv)
 {
-	struct eeti_ts_priv *priv = input_get_drvdata(dev);
-
 	enable_irq(priv->irq);
 
 	/* Read the events once to arm the IRQ */
 	eeti_ts_read(&priv->work);
+}
+
+static void eeti_ts_stop(struct eeti_ts_priv *priv)
+{
+	disable_irq(priv->irq);
+	cancel_work_sync(&priv->work);
+}
+
+static int eeti_ts_open(struct input_dev *dev)
+{
+	struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+	eeti_ts_start(priv);
 
 	return 0;
 }
@@ -140,8 +151,7 @@ static void eeti_ts_close(struct input_dev *dev)
 {
 	struct eeti_ts_priv *priv = input_get_drvdata(dev);
 
-	disable_irq(priv->irq);
-	cancel_work_sync(&priv->work);
+	eeti_ts_stop(priv);
 }
 
 static int __devinit eeti_ts_probe(struct i2c_client *client,
@@ -153,10 +163,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
 	unsigned int irq_flags;
 	int err = -ENOMEM;
 
-	/* In contrast to what's described in the datasheet, there seems
+	/*
+	 * In contrast to what's described in the datasheet, there seems
 	 * to be no way of probing the presence of that device using I2C
 	 * commands. So we need to blindly believe it is there, and wait
-	 * for interrupts to occur. */
+	 * for interrupts to occur.
+	 */
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
@@ -212,9 +224,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
 		goto err2;
 	}
 
-	/* Disable the irq for now. It will be enabled once the input device
-	 * is opened. */
-	disable_irq(priv->irq);
+	/*
+	 * Disable the device for now. It will be enabled once the
+	 * input device is opened.
+	 */
+	eeti_ts_stop(priv);
 
 	device_init_wakeup(&client->dev, 0);
 	return 0;
@@ -235,6 +249,12 @@ static int __devexit eeti_ts_remove(struct i2c_client *client)
 	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
 
 	free_irq(priv->irq, priv);
+	/*
+	 * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
+	 * so that device still works if we reload the driver.
+	 */
+	enable_irq(priv->irq);
+
 	input_unregister_device(priv->input);
 	i2c_set_clientdata(client, NULL);
 	kfree(priv);
@@ -246,6 +266,14 @@ static int __devexit eeti_ts_remove(struct i2c_client *client)
 static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
 {
 	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+	struct input_dev *input_dev = priv->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		eeti_ts_stop(priv);
+
+	mutex_unlock(&input_dev->mutex);
 
 	if (device_may_wakeup(&client->dev))
 		enable_irq_wake(priv->irq);
@@ -256,10 +284,18 @@ static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
 static int eeti_ts_resume(struct i2c_client *client)
 {
 	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+	struct input_dev *input_dev = priv->input;
 
 	if (device_may_wakeup(&client->dev))
 		disable_irq_wake(priv->irq);
 
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		eeti_ts_start(priv);
+
+	mutex_unlock(&input_dev->mutex);
+
 	return 0;
 }
 #else

drivers/net/arm/ep93xx_eth.c

@@ -311,11 +311,6 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
 		processed++;
 	}
 
-	if (processed) {
-		wrw(ep, REG_RXDENQ, processed);
-		wrw(ep, REG_RXSTSENQ, processed);
-	}
-
 	return processed;
 }
 
@@ -350,6 +345,11 @@ static int ep93xx_poll(struct napi_struct *napi, int budget)
 			goto poll_some_more;
 	}
 
+	if (rx) {
+		wrw(ep, REG_RXDENQ, rx);
+		wrw(ep, REG_RXSTSENQ, rx);
+	}
+
 	return rx;
 }
 

drivers/net/e1000e/netdev.c

@@ -4633,6 +4633,9 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 	reg16 &= ~state;
 	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
 
+	if (!pdev->bus->self)
+		return;
+
 	pos = pci_pcie_cap(pdev->bus->self);
 	pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, &reg16);
 	reg16 &= ~state;

drivers/net/fec.c

@@ -1653,7 +1653,7 @@ fec_set_mac_address(struct net_device *dev, void *p)
 		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24),
 		fep->hwp + FEC_ADDR_LOW);
 	writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
-		fep + FEC_ADDR_HIGH);
+		fep->hwp + FEC_ADDR_HIGH);
 	return 0;
 }
 

drivers/net/phy/Kconfig

@@ -88,6 +88,11 @@ config LSI_ET1011C_PHY
 	---help---
 	  Supports the LSI ET1011C PHY.
 
+config MICREL_PHY
+	tristate "Driver for Micrel PHYs"
+	---help---
+	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
 config FIXED_PHY
 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB=y

drivers/net/phy/Makefile

@@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
 obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
 obj-$(CONFIG_NATIONAL_PHY)	+= national.o
 obj-$(CONFIG_STE10XP)		+= ste10Xp.o
+obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o

drivers/net/phy/micrel.c

+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010 Micrel, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Support : ksz9021 , vsc8201, ks8001
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define	PHY_ID_KSZ9021			0x00221611
+#define	PHY_ID_VSC8201			0x000FC413
+#define	PHY_ID_KS8001			0x0022161A
+
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+	return 0;
+}
+
+
+static struct phy_driver ks8001_driver = {
+	.phy_id		= PHY_ID_KS8001,
+	.phy_id_mask	= 0x00fffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver vsc8201_driver = {
+	.phy_id		= PHY_ID_VSC8201,
+	.name		= "Micrel VSC8201",
+	.phy_id_mask	= 0x00fffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ksz9021_driver = {
+	.phy_id		= PHY_ID_KSZ9021,
+	.phy_id_mask	= 0x000fff10,
+	.name		= "Micrel KSZ9021 Gigabit PHY",
+	.features	= PHY_GBIT_FEATURES | SUPPORTED_Pause,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE, },
+};
+
+static int __init ksphy_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&ks8001_driver);
+	if (ret)
+		goto err1;
+	ret = phy_driver_register(&vsc8201_driver);
+	if (ret)
+		goto err2;
+
+	ret = phy_driver_register(&ksz9021_driver);
+	if (ret)
+		goto err3;
+	return 0;
+
+err3:
+	phy_driver_unregister(&vsc8201_driver);
+err2:
+	phy_driver_unregister(&ks8001_driver);
+err1:
+	return ret;
+}
+
+static void __exit ksphy_exit(void)
+{
+	phy_driver_unregister(&ks8001_driver);
+	phy_driver_unregister(&vsc8201_driver);
+	phy_driver_unregister(&ksz9021_driver);
+}
+
+module_init(ksphy_init);
+module_exit(ksphy_exit);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");

drivers/net/ppp_generic.c

@@ -405,6 +405,7 @@ static ssize_t ppp_read(struct file *file, char __user *buf,
 	DECLARE_WAITQUEUE(wait, current);
 	ssize_t ret;
 	struct sk_buff *skb = NULL;
+	struct iovec iov;
 
 	ret = count;
 
@@ -448,7 +449,9 @@ static ssize_t ppp_read(struct file *file, char __user *buf,
 	if (skb->len > count)
 		goto outf;
 	ret = -EFAULT;
-	if (copy_to_user(buf, skb->data, skb->len))
+	iov.iov_base = buf;
+	iov.iov_len = count;
+	if (skb_copy_datagram_iovec(skb, 0, &iov, skb->len))
 		goto outf;
 	ret = skb->len;
 
@@ -1567,13 +1570,22 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb)
 	struct channel *pch = chan->ppp;
 	int proto;
 
-	if (!pch || skb->len == 0) {
+	if (!pch) {
 		kfree_skb(skb);
 		return;
 	}
 
-	proto = PPP_PROTO(skb);
 	read_lock_bh(&pch->upl);
+	if (!pskb_may_pull(skb, 2)) {
+		kfree_skb(skb);
+		if (pch->ppp) {
+			++pch->ppp->dev->stats.rx_length_errors;
+			ppp_receive_error(pch->ppp);
+		}
+		goto done;
+	}
+
+	proto = PPP_PROTO(skb);
 	if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) {
 		/* put it on the channel queue */
 		skb_queue_tail(&pch->file.rq, skb);
@@ -1585,6 +1597,8 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb)
 	} else {
 		ppp_do_recv(pch->ppp, skb, pch);
 	}
+
+done:
 	read_unlock_bh(&pch->upl);
 }
 
@@ -1617,7 +1631,8 @@ ppp_input_error(struct ppp_channel *chan, int code)
 static void
 ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 {
-	if (pskb_may_pull(skb, 2)) {
+	/* note: a 0-length skb is used as an error indication */
+	if (skb->len > 0) {
 #ifdef CONFIG_PPP_MULTILINK
 		/* XXX do channel-level decompression here */
 		if (PPP_PROTO(skb) == PPP_MP)
@@ -1625,15 +1640,10 @@ ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 		else
 #endif /* CONFIG_PPP_MULTILINK */
 			ppp_receive_nonmp_frame(ppp, skb);
-		return;
+	} else {
+		kfree_skb(skb);
+		ppp_receive_error(ppp);
 	}
-
-	if (skb->len > 0)
-		/* note: a 0-length skb is used as an error indication */
-		++ppp->dev->stats.rx_length_errors;
-
-	kfree_skb(skb);
-	ppp_receive_error(ppp);
 }
 
 static void

drivers/net/r8169.c

@@ -1042,14 +1042,14 @@ static void rtl8169_vlan_rx_register(struct net_device *dev,
 }
 
 static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
-			       struct sk_buff *skb)
+			       struct sk_buff *skb, int polling)
 {
 	u32 opts2 = le32_to_cpu(desc->opts2);
 	struct vlan_group *vlgrp = tp->vlgrp;
 	int ret;
 
 	if (vlgrp && (opts2 & RxVlanTag)) {
-		vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
+		__vlan_hwaccel_rx(skb, vlgrp, swab16(opts2 & 0xffff), polling);
 		ret = 0;
 	} else
 		ret = -1;
@@ -1066,7 +1066,7 @@ static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
 }
 
 static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
-			       struct sk_buff *skb)
+			       struct sk_buff *skb, int polling)
 {
 	return -1;
 }
@@ -4445,12 +4445,20 @@ static inline bool rtl8169_try_rx_copy(struct sk_buff **sk_buff,
 	return done;
 }
 
+/*
+ * Warning : rtl8169_rx_interrupt() might be called :
+ * 1) from NAPI (softirq) context
+ *	(polling = 1 : we should call netif_receive_skb())
+ * 2) from process context (rtl8169_reset_task())
+ *	(polling = 0 : we must call netif_rx() instead)
+ */
 static int rtl8169_rx_interrupt(struct net_device *dev,
 				struct rtl8169_private *tp,
 				void __iomem *ioaddr, u32 budget)
 {
 	unsigned int cur_rx, rx_left;
 	unsigned int delta, count;
+	int polling = (budget != ~(u32)0) ? 1 : 0;
 
 	cur_rx = tp->cur_rx;
 	rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
@@ -4512,8 +4520,12 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 			skb_put(skb, pkt_size);
 			skb->protocol = eth_type_trans(skb, dev);
 
-			if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
-				netif_receive_skb(skb);
+			if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) {
+				if (likely(polling))
+					netif_receive_skb(skb);
+				else
+					netif_rx(skb);
+			}
 
 			dev->stats.rx_bytes += pkt_size;
 			dev->stats.rx_packets++;

drivers/net/sb1250-mac.c

@@ -2353,17 +2353,36 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 
 	sc->mii_bus = mdiobus_alloc();
 	if (sc->mii_bus == NULL) {
-		sbmac_uninitctx(sc);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto uninit_ctx;
 	}
 
+	sc->mii_bus->name = sbmac_mdio_string;
+	snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
+	sc->mii_bus->priv = sc;
+	sc->mii_bus->read = sbmac_mii_read;
+	sc->mii_bus->write = sbmac_mii_write;
+	sc->mii_bus->irq = sc->phy_irq;
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		sc->mii_bus->irq[i] = SBMAC_PHY_INT;
+
+	sc->mii_bus->parent = &pldev->dev;
+	/*
+	 * Probe PHY address
+	 */
+	err = mdiobus_register(sc->mii_bus);
+	if (err) {
+		printk(KERN_ERR "%s: unable to register MDIO bus\n",
+		       dev->name);
+		goto free_mdio;
+	}
+	dev_set_drvdata(&pldev->dev, sc->mii_bus);
+
 	err = register_netdev(dev);
 	if (err) {
 		printk(KERN_ERR "%s.%d: unable to register netdev\n",
 		       sbmac_string, idx);
-		mdiobus_free(sc->mii_bus);
-		sbmac_uninitctx(sc);
-		return err;
+		goto unreg_mdio;
 	}
 
 	pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name);
@@ -2379,19 +2398,15 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 	pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n",
 	       dev->name, base, eaddr);
 
-	sc->mii_bus->name = sbmac_mdio_string;
-	snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
-	sc->mii_bus->priv = sc;
-	sc->mii_bus->read = sbmac_mii_read;
-	sc->mii_bus->write = sbmac_mii_write;
-	sc->mii_bus->irq = sc->phy_irq;
-	for (i = 0; i < PHY_MAX_ADDR; ++i)
-		sc->mii_bus->irq[i] = SBMAC_PHY_INT;
-
-	sc->mii_bus->parent = &pldev->dev;
-	dev_set_drvdata(&pldev->dev, sc->mii_bus);
-
 	return 0;
+unreg_mdio:
+	mdiobus_unregister(sc->mii_bus);
+	dev_set_drvdata(&pldev->dev, NULL);
+free_mdio:
+	mdiobus_free(sc->mii_bus);
+uninit_ctx:
+	sbmac_uninitctx(sc);
+	return err;
 }
 
 
@@ -2417,16 +2432,6 @@ static int sbmac_open(struct net_device *dev)
 		goto out_err;
 	}
 
-	/*
-	 * Probe PHY address
-	 */
-	err = mdiobus_register(sc->mii_bus);
-	if (err) {
-		printk(KERN_ERR "%s: unable to register MDIO bus\n",
-		       dev->name);
-		goto out_unirq;
-	}
-
 	sc->sbm_speed = sbmac_speed_none;
 	sc->sbm_duplex = sbmac_duplex_none;
 	sc->sbm_fc = sbmac_fc_none;
@@ -2457,11 +2462,7 @@ static int sbmac_open(struct net_device *dev)
 	return 0;
 
 out_unregister:
-	mdiobus_unregister(sc->mii_bus);
-
-out_unirq:
 	free_irq(dev->irq, dev);
-
 out_err:
 	return err;
 }
@@ -2650,9 +2651,6 @@ static int sbmac_close(struct net_device *dev)
 
 	phy_disconnect(sc->phy_dev);
 	sc->phy_dev = NULL;
-
-	mdiobus_unregister(sc->mii_bus);
-
 	free_irq(dev->irq, dev);
 
 	sbdma_emptyring(&(sc->sbm_txdma));
@@ -2760,6 +2758,7 @@ static int __exit sbmac_remove(struct platform_device *pldev)
 
 	unregister_netdev(dev);
 	sbmac_uninitctx(sc);
+	mdiobus_unregister(sc->mii_bus);
 	mdiobus_free(sc->mii_bus);
 	iounmap(sc->sbm_base);
 	free_netdev(dev);

drivers/net/usb/Kconfig

@@ -400,7 +400,6 @@ config USB_IPHETH
 config USB_SIERRA_NET
 	tristate "USB-to-WWAN Driver for Sierra Wireless modems"
 	depends on USB_USBNET
-	default y
 	help
 	  Choose this option if you have a Sierra Wireless USB-to-WWAN device.
 

drivers/net/usb/dm9601.c

@@ -240,7 +240,7 @@ static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 valu
 		goto out;
 
 	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
-	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14);
+	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12);
 
 	for (i = 0; i < DM_TIMEOUT; i++) {
 		u8 tmp;

drivers/net/usb/sierra_net.c

@@ -789,6 +789,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
 	/* prepare sync message from template */
 	memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg));
 
+	/* initiate the sync sequence */
+	sierra_net_dosync(dev);
+
 	return 0;
 }
 

drivers/net/wireless/p54/p54pci.c

@@ -246,7 +246,7 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 	u32 idx, i;
 
 	i = (*index) % ring_limit;
-	(*index) = idx = le32_to_cpu(ring_control->device_idx[1]);
+	(*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]);
 	idx %= ring_limit;
 
 	while (i != idx) {

include/net/sctp/structs.h

@@ -778,6 +778,7 @@ int sctp_user_addto_chunk(struct sctp_chunk *chunk, int off, int len,
 			  struct iovec *data);
 void sctp_chunk_free(struct sctp_chunk *);
 void  *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data);
+void  *sctp_addto_chunk_fixed(struct sctp_chunk *, int len, const void *data);
 struct sctp_chunk *sctp_chunkify(struct sk_buff *,
 				 const struct sctp_association *,
 				 struct sock *);

include/net/sock.h

@@ -74,7 +74,7 @@
 					printk(KERN_DEBUG msg); } while (0)
 #else
 /* Validate arguments and do nothing */
-static void inline int __attribute__ ((format (printf, 2, 3)))
+static inline void __attribute__ ((format (printf, 2, 3)))
 SOCK_DEBUG(struct sock *sk, const char *msg, ...)
 {
 }

kernel/workqueue.c

@@ -774,7 +774,7 @@ void flush_delayed_work(struct delayed_work *dwork)
 {
 	if (del_timer_sync(&dwork->timer)) {
 		struct cpu_workqueue_struct *cwq;
-		cwq = wq_per_cpu(keventd_wq, get_cpu());
+		cwq = wq_per_cpu(get_wq_data(&dwork->work)->wq, get_cpu());
 		__queue_work(cwq, &dwork->work);
 		put_cpu();
 	}

mm/slub.c

@@ -2153,7 +2153,7 @@ static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
 	int local_node;
 
 	if (slab_state >= UP && (s < kmalloc_caches ||
-			s > kmalloc_caches + KMALLOC_CACHES))
+			s >= kmalloc_caches + KMALLOC_CACHES))
 		local_node = page_to_nid(virt_to_page(s));
 	else
 		local_node = 0;

net/ipv6/af_inet6.c

@@ -200,7 +200,7 @@ static int inet6_create(struct net *net, struct socket *sock, int protocol,
 
 	inet_sk(sk)->pinet6 = np = inet6_sk_generic(sk);
 	np->hop_limit	= -1;
-	np->mcast_hops	= -1;
+	np->mcast_hops	= IPV6_DEFAULT_MCASTHOPS;
 	np->mc_loop	= 1;
 	np->pmtudisc	= IPV6_PMTUDISC_WANT;
 	np->ipv6only	= net->ipv6.sysctl.bindv6only;

net/sctp/sm_make_chunk.c

@@ -108,7 +108,7 @@ static const struct sctp_paramhdr prsctp_param = {
 	cpu_to_be16(sizeof(struct sctp_paramhdr)),
 };
 
-/* A helper to initialize to initialize an op error inside a
+/* A helper to initialize an op error inside a
  * provided chunk, as most cause codes will be embedded inside an
  * abort chunk.
  */
@@ -125,6 +125,29 @@ void  sctp_init_cause(struct sctp_chunk *chunk, __be16 cause_code,
 	chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err);
 }
 
+/* A helper to initialize an op error inside a
+ * provided chunk, as most cause codes will be embedded inside an
+ * abort chunk.  Differs from sctp_init_cause in that it won't oops
+ * if there isn't enough space in the op error chunk
+ */
+int sctp_init_cause_fixed(struct sctp_chunk *chunk, __be16 cause_code,
+		      size_t paylen)
+{
+	sctp_errhdr_t err;
+	__u16 len;
+
+	/* Cause code constants are now defined in network order.  */
+	err.cause = cause_code;
+	len = sizeof(sctp_errhdr_t) + paylen;
+	err.length  = htons(len);
+
+	if (skb_tailroom(chunk->skb) >  len)
+		return -ENOSPC;
+	chunk->subh.err_hdr = sctp_addto_chunk_fixed(chunk,
+						     sizeof(sctp_errhdr_t),
+						     &err);
+	return 0;
+}
 /* 3.3.2 Initiation (INIT) (1)
  *
  * This chunk is used to initiate a SCTP association between two
@@ -1132,6 +1155,24 @@ static struct sctp_chunk *sctp_make_op_error_space(
 	return retval;
 }
 
+/* Create an Operation Error chunk of a fixed size,
+ * specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT)
+ * This is a helper function to allocate an error chunk for
+ * for those invalid parameter codes in which we may not want
+ * to report all the errors, if the incomming chunk is large
+ */
+static inline struct sctp_chunk *sctp_make_op_error_fixed(
+	const struct sctp_association *asoc,
+	const struct sctp_chunk *chunk)
+{
+	size_t size = asoc ? asoc->pathmtu : 0;
+
+	if (!size)
+		size = SCTP_DEFAULT_MAXSEGMENT;
+
+	return sctp_make_op_error_space(asoc, chunk, size);
+}
+
 /* Create an Operation Error chunk.  */
 struct sctp_chunk *sctp_make_op_error(const struct sctp_association *asoc,
 				 const struct sctp_chunk *chunk,
@@ -1374,6 +1415,18 @@ void *sctp_addto_chunk(struct sctp_chunk *chunk, int len, const void *data)
 	return target;
 }
 
+/* Append bytes to the end of a chunk. Returns NULL if there isn't sufficient
+ * space in the chunk
+ */
+void *sctp_addto_chunk_fixed(struct sctp_chunk *chunk,
+			     int len, const void *data)
+{
+	if (skb_tailroom(chunk->skb) > len)
+		return sctp_addto_chunk(chunk, len, data);
+	else
+		return NULL;
+}
+
 /* Append bytes from user space to the end of a chunk.  Will panic if
  * chunk is not big enough.
  * Returns a kernel err value.
@@ -1977,13 +2030,12 @@ static sctp_ierror_t sctp_process_unk_param(const struct sctp_association *asoc,
 		 * returning multiple unknown parameters.
 		 */
 		if (NULL == *errp)
-			*errp = sctp_make_op_error_space(asoc, chunk,
-					ntohs(chunk->chunk_hdr->length));
+			*errp = sctp_make_op_error_fixed(asoc, chunk);
 
 		if (*errp) {
-			sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM,
+			sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM,
 					WORD_ROUND(ntohs(param.p->length)));
-			sctp_addto_chunk(*errp,
+			sctp_addto_chunk_fixed(*errp,
 					WORD_ROUND(ntohs(param.p->length)),
 					param.v);
 		} else {

security/keys/keyring.c

@@ -20,6 +20,11 @@
 #include <linux/uaccess.h>
 #include "internal.h"
 
+#define rcu_dereference_locked_keyring(keyring)				\
+	(rcu_dereference_protected(					\
+		(keyring)->payload.subscriptions,			\
+		rwsem_is_locked((struct rw_semaphore *)&(keyring)->sem)))
+
 /*
  * when plumbing the depths of the key tree, this sets a hard limit set on how
  * deep we're willing to go
@@ -199,8 +204,7 @@ static long keyring_read(const struct key *keyring,
 	int loop, ret;
 
 	ret = 0;
-	klist = keyring->payload.subscriptions;
-
+	klist = rcu_dereference_locked_keyring(keyring);
 	if (klist) {
 		/* calculate how much data we could return */
 		qty = klist->nkeys * sizeof(key_serial_t);
@@ -524,9 +528,8 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check)
 	struct key *keyring;
 	int bucket;
 
-	keyring = ERR_PTR(-EINVAL);
 	if (!name)
-		goto error;
+		return ERR_PTR(-EINVAL);
 
 	bucket = keyring_hash(name);
 
@@ -553,17 +556,18 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check)
 					   KEY_SEARCH) < 0)
 				continue;
 
-			/* we've got a match */
-			atomic_inc(&keyring->usage);
-			read_unlock(&keyring_name_lock);
-			goto error;
+			/* we've got a match but we might end up racing with
+			 * key_cleanup() if the keyring is currently 'dead'
+			 * (ie. it has a zero usage count) */
+			if (!atomic_inc_not_zero(&keyring->usage))
+				continue;
+			goto out;
 		}
 	}
 
-	read_unlock(&keyring_name_lock);
 	keyring = ERR_PTR(-ENOKEY);
-
-error:
+out:
+	read_unlock(&keyring_name_lock);
 	return keyring;
 
 } /* end find_keyring_by_name() */
@@ -719,8 +723,7 @@ int __key_link(struct key *keyring, struct key *key)
 	}
 
 	/* see if there's a matching key we can displace */
-	klist = keyring->payload.subscriptions;
-
+	klist = rcu_dereference_locked_keyring(keyring);
 	if (klist && klist->nkeys > 0) {
 		struct key_type *type = key->type;
 
@@ -764,8 +767,6 @@ int __key_link(struct key *keyring, struct key *key)
 	if (ret < 0)
 		goto error2;
 
-	klist = keyring->payload.subscriptions;
-
 	if (klist && klist->nkeys < klist->maxkeys) {
 		/* there's sufficient slack space to add directly */
 		atomic_inc(&key->usage);
@@ -867,7 +868,7 @@ int key_unlink(struct key *keyring, struct key *key)
 
 	down_write(&keyring->sem);
 
-	klist = keyring->payload.subscriptions;
+	klist = rcu_dereference_locked_keyring(keyring);
 	if (klist) {
 		/* search the keyring for the key */
 		for (loop = 0; loop < klist->nkeys; loop++)
@@ -958,7 +959,7 @@ int keyring_clear(struct key *keyring)
 		/* detach the pointer block with the locks held */
 		down_write(&keyring->sem);
 
-		klist = keyring->payload.subscriptions;
+		klist = rcu_dereference_locked_keyring(keyring);
 		if (klist) {
 			/* adjust the quota */
 			key_payload_reserve(keyring,
@@ -990,7 +991,9 @@ EXPORT_SYMBOL(keyring_clear);
  */
 static void keyring_revoke(struct key *keyring)
 {
-	struct keyring_list *klist = keyring->payload.subscriptions;
+	struct keyring_list *klist;
+
+	klist = rcu_dereference_locked_keyring(keyring);
 
 	/* adjust the quota */
 	key_payload_reserve(keyring, 0);
@@ -1024,7 +1027,7 @@ void keyring_gc(struct key *keyring, time_t limit)
 
 	down_write(&keyring->sem);
 
-	klist = keyring->payload.subscriptions;
+	klist = rcu_dereference_locked_keyring(keyring);
 	if (!klist)
 		goto no_klist;
 

security/keys/request_key.c

@@ -94,7 +94,7 @@ static int call_sbin_request_key(struct key_construction *cons,
 	}
 
 	/* attach the auth key to the session keyring */
-	ret = __key_link(keyring, authkey);
+	ret = key_link(keyring, authkey);
 	if (ret < 0)
 		goto error_link;
 

sound/core/timer.c

@@ -1160,6 +1160,7 @@ static void snd_timer_user_ccallback(struct snd_timer_instance *timeri,
 {
 	struct snd_timer_user *tu = timeri->callback_data;
 	struct snd_timer_tread r1;
+	unsigned long flags;
 
 	if (event >= SNDRV_TIMER_EVENT_START &&
 	    event <= SNDRV_TIMER_EVENT_PAUSE)
@@ -1169,9 +1170,9 @@ static void snd_timer_user_ccallback(struct snd_timer_instance *timeri,
 	r1.event = event;
 	r1.tstamp = *tstamp;
 	r1.val = resolution;
-	spin_lock(&tu->qlock);
+	spin_lock_irqsave(&tu->qlock, flags);
 	snd_timer_user_append_to_tqueue(tu, &r1);
-	spin_unlock(&tu->qlock);
+	spin_unlock_irqrestore(&tu->qlock, flags);
 	kill_fasync(&tu->fasync, SIGIO, POLL_IN);
 	wake_up(&tu->qchange_sleep);
 }

sound/isa/sb/es968.c

@@ -93,7 +93,7 @@ static int __devinit snd_card_es968_pnp(int dev, struct snd_card_es968 *acard,
 		return err;
 	}
 	port[dev] = pnp_port_start(pdev, 0);
-	dma8[dev] = pnp_dma(pdev, 1);
+	dma8[dev] = pnp_dma(pdev, 0);
 	irq[dev] = pnp_irq(pdev, 0);
 
 	return 0;

sound/pci/hda/patch_cirrus.c

@@ -766,7 +766,7 @@ static int build_input(struct hda_codec *codec)
 		for (n = 0; n < AUTO_PIN_LAST; n++) {
 			if (!spec->adc_nid[n])
 				continue;
-			err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[i]);
+			err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[n]);
 			if (err < 0)
 				return err;
 		}

sound/pci/hda/patch_conexant.c

@@ -1195,9 +1195,10 @@ static int patch_cxt5045(struct hda_codec *codec)
 
 	switch (codec->subsystem_id >> 16) {
 	case 0x103c:
+	case 0x1631:
 	case 0x1734:
-		/* HP & Fujitsu-Siemens laptops have really bad sound over 0dB
-		 * on NID 0x17. Fix max PCM level to 0 dB
+		/* HP, Packard Bell, & Fujitsu-Siemens laptops have really bad
+		 * sound over 0dB on NID 0x17. Fix max PCM level to 0 dB
 		 * (originally it has 0x2b steps with 0dB offset 0x14)
 		 */
 		snd_hda_override_amp_caps(codec, 0x17, HDA_INPUT,
@@ -2842,6 +2843,9 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 		      CXT5066_DELL_LAPTOP),
 	SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO),
+	SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
+	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
+	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "ideapad", CXT5066_IDEAPAD),
 	{}
 };