Commit 056eeda2 authored by Derek Robson's avatar Derek Robson Committed by Greg Kroah-Hartman

staging: pi433: Style fix - align block comments

Fixed the alignment of block comments
Found using checkpatch
Signed-off-by: default avatarDerek Robson <robsonde@gmail.com>
Reviewed-by: default avatarMarcus Wolf <linux@wolf-entwicklungen.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 775f6ab0
......@@ -67,9 +67,11 @@ static DEFINE_MUTEX(minor_lock); /* Protect idr accesses */
static struct class *pi433_class; /* mainly for udev to create /dev/pi433 */
/* tx config is instance specific
so with each open a new tx config struct is needed */
* so with each open a new tx config struct is needed
*/
/* rx config is device specific
so we have just one rx config, ebedded in device struct */
* so we have just one rx config, ebedded in device struct
*/
struct pi433_device {
/* device handling related values */
dev_t devt;
......@@ -486,9 +488,10 @@ pi433_tx_thread(void *data)
return 0;
/* get data from fifo in the following order:
- tx_cfg
- size of message
- message */
* - tx_cfg
* - size of message
* - message
*/
mutex_lock(&device->tx_fifo_lock);
retval = kfifo_out(&device->tx_fifo, &tx_cfg, sizeof(tx_cfg));
......@@ -537,23 +540,26 @@ pi433_tx_thread(void *data)
mutex_unlock(&device->tx_fifo_lock);
/* if rx is active, we need to interrupt the waiting for
incoming telegrams, to be able to send something.
We are only allowed, if currently no reception takes
place otherwise we need to wait for the incoming telegram
to finish */
* incoming telegrams, to be able to send something.
* We are only allowed, if currently no reception takes
* place otherwise we need to wait for the incoming telegram
* to finish
*/
wait_event_interruptible(device->tx_wait_queue,
!device->rx_active ||
device->interrupt_rx_allowed == true);
/* prevent race conditions
irq will be reenabled after tx config is set */
* irq will be reenabled after tx config is set
*/
disable_irq(device->irq_num[DIO0]);
device->tx_active = true;
if (device->rx_active && rx_interrupted == false)
{
/* rx is currently waiting for a telegram;
we need to set the radio module to standby */
* we need to set the radio module to standby
*/
SET_CHECKED(rf69_set_mode(device->spi, standby));
rx_interrupted = true;
}
......@@ -712,9 +718,10 @@ pi433_write(struct file *filp, const char __user *buf,
return -EMSGSIZE;
/* write the following sequence into fifo:
- tx_cfg
- size of message
- message */
* - tx_cfg
* - size of message
* - message
*/
mutex_lock(&device->tx_fifo_lock);
retval = kfifo_in(&device->tx_fifo, &instance->tx_cfg, sizeof(instance->tx_cfg));
if ( retval != sizeof(instance->tx_cfg) )
......@@ -1269,7 +1276,8 @@ static int __init pi433_init(void)
int status;
/* If MAX_MSG_SIZE is smaller then FIFO_SIZE, the driver won't
work stable - risk of buffer overflow */
* work stable - risk of buffer overflow
*/
if (MAX_MSG_SIZE < FIFO_SIZE)
return -EINVAL;
......
......@@ -940,8 +940,9 @@ u8 rf69_read_reg(struct spi_device *spi, u8 addr)
#ifdef DEBUG_VALUES
if (retval < 0)
/* should never happen, since we already checked,
that module is connected. Therefore no error
handling, just an optional error message... */
* that module is connected. Therefore no error
* handling, just an optional error message...
*/
dev_dbg(&spi->dev, "read 0x%x FAILED\n",
addr);
else
......@@ -966,8 +967,9 @@ int rf69_write_reg(struct spi_device *spi, u8 addr, u8 value)
#ifdef DEBUG_VALUES
if (retval < 0)
/* should never happen, since we already checked,
that module is connected. Therefore no error
handling, just an optional error message... */
* that module is connected. Therefore no error
* handling, just an optional error message...
*/
dev_dbg(&spi->dev, "write 0x%x to 0x%x FAILED\n",
value,
addr);
......
......@@ -143,44 +143,44 @@
#define FDEVMASB_MASK 0x3f
/*
// RegOsc1
#define OSC1_RCCAL_START 0x80
#define OSC1_RCCAL_DONE 0x40
// RegLowBat
#define LOWBAT_MONITOR 0x10
#define LOWBAT_ON 0x08
#define LOWBAT_OFF 0x00 // Default
#define LOWBAT_TRIM_1695 0x00
#define LOWBAT_TRIM_1764 0x01
#define LOWBAT_TRIM_1835 0x02 // Default
#define LOWBAT_TRIM_1905 0x03
#define LOWBAT_TRIM_1976 0x04
#define LOWBAT_TRIM_2045 0x05
#define LOWBAT_TRIM_2116 0x06
#define LOWBAT_TRIM_2185 0x07
// RegListen1
#define LISTEN1_RESOL_64 0x50
#define LISTEN1_RESOL_4100 0xA0 // Default
#define LISTEN1_RESOL_262000 0xF0
#define LISTEN1_CRITERIA_RSSI 0x00 // Default
#define LISTEN1_CRITERIA_RSSIANDSYNC 0x08
#define LISTEN1_END_00 0x00
#define LISTEN1_END_01 0x02 // Default
#define LISTEN1_END_10 0x04
// RegListen2
#define LISTEN2_COEFIDLE_VALUE 0xF5 // Default
// RegListen3
#define LISTEN3_COEFRX_VALUE 0x20 // Default
*/
* // RegOsc1
* #define OSC1_RCCAL_START 0x80
* #define OSC1_RCCAL_DONE 0x40
*
* // RegLowBat
* #define LOWBAT_MONITOR 0x10
* #define LOWBAT_ON 0x08
* #define LOWBAT_OFF 0x00 // Default
*
* #define LOWBAT_TRIM_1695 0x00
* #define LOWBAT_TRIM_1764 0x01
* #define LOWBAT_TRIM_1835 0x02 // Default
* #define LOWBAT_TRIM_1905 0x03
* #define LOWBAT_TRIM_1976 0x04
* #define LOWBAT_TRIM_2045 0x05
* #define LOWBAT_TRIM_2116 0x06
* #define LOWBAT_TRIM_2185 0x07
*
*
* // RegListen1
* #define LISTEN1_RESOL_64 0x50
* #define LISTEN1_RESOL_4100 0xA0 // Default
* #define LISTEN1_RESOL_262000 0xF0
*
* #define LISTEN1_CRITERIA_RSSI 0x00 // Default
* #define LISTEN1_CRITERIA_RSSIANDSYNC 0x08
*
* #define LISTEN1_END_00 0x00
* #define LISTEN1_END_01 0x02 // Default
* #define LISTEN1_END_10 0x04
*
*
* // RegListen2
* #define LISTEN2_COEFIDLE_VALUE 0xF5 // Default
*
* // RegListen3
* #define LISTEN3_COEFRX_VALUE 0x20 // Default
*/
// RegPaLevel
#define MASK_PALEVEL_PA0 0x80
......@@ -211,27 +211,27 @@
#define MASK_PARAMP 0x0F
/*
// RegOcp
#define OCP_OFF 0x0F
#define OCP_ON 0x1A // Default
#define OCP_TRIM_45 0x00
#define OCP_TRIM_50 0x01
#define OCP_TRIM_55 0x02
#define OCP_TRIM_60 0x03
#define OCP_TRIM_65 0x04
#define OCP_TRIM_70 0x05
#define OCP_TRIM_75 0x06
#define OCP_TRIM_80 0x07
#define OCP_TRIM_85 0x08
#define OCP_TRIM_90 0x09
#define OCP_TRIM_95 0x0A
#define OCP_TRIM_100 0x0B // Default
#define OCP_TRIM_105 0x0C
#define OCP_TRIM_110 0x0D
#define OCP_TRIM_115 0x0E
#define OCP_TRIM_120 0x0F
*/
* // RegOcp
* #define OCP_OFF 0x0F
* #define OCP_ON 0x1A // Default
*
* #define OCP_TRIM_45 0x00
* #define OCP_TRIM_50 0x01
* #define OCP_TRIM_55 0x02
* #define OCP_TRIM_60 0x03
* #define OCP_TRIM_65 0x04
* #define OCP_TRIM_70 0x05
* #define OCP_TRIM_75 0x06
* #define OCP_TRIM_80 0x07
* #define OCP_TRIM_85 0x08
* #define OCP_TRIM_90 0x09
* #define OCP_TRIM_95 0x0A
* #define OCP_TRIM_100 0x0B // Default
* #define OCP_TRIM_105 0x0C
* #define OCP_TRIM_110 0x0D
* #define OCP_TRIM_115 0x0E
* #define OCP_TRIM_120 0x0F
*/
/* RegLna (0x18) */
#define MASK_LNA_ZIN 0x80
......@@ -294,32 +294,32 @@
#define OOKPEAK_THRESHDEC_16_TIMES 0x07
/*
// RegOokAvg
#define OOKAVG_AVERAGETHRESHFILT_00 0x00
#define OOKAVG_AVERAGETHRESHFILT_01 0x40
#define OOKAVG_AVERAGETHRESHFILT_10 0x80 // Default
#define OOKAVG_AVERAGETHRESHFILT_11 0xC0
// RegAfcFei
#define AFCFEI_FEI_DONE 0x40
#define AFCFEI_FEI_START 0x20
#define AFCFEI_AFC_DONE 0x10
#define AFCFEI_AFCAUTOCLEAR_ON 0x08
#define AFCFEI_AFCAUTOCLEAR_OFF 0x00 // Default
#define AFCFEI_AFCAUTO_ON 0x04
#define AFCFEI_AFCAUTO_OFF 0x00 // Default
#define AFCFEI_AFC_CLEAR 0x02
#define AFCFEI_AFC_START 0x01
// RegRssiConfig
#define RSSI_FASTRX_ON 0x08
#define RSSI_FASTRX_OFF 0x00 // Default
#define RSSI_DONE 0x02
#define RSSI_START 0x01
*/
* // RegOokAvg
* #define OOKAVG_AVERAGETHRESHFILT_00 0x00
* #define OOKAVG_AVERAGETHRESHFILT_01 0x40
* #define OOKAVG_AVERAGETHRESHFILT_10 0x80 // Default
* #define OOKAVG_AVERAGETHRESHFILT_11 0xC0
*
*
* // RegAfcFei
* #define AFCFEI_FEI_DONE 0x40
* #define AFCFEI_FEI_START 0x20
* #define AFCFEI_AFC_DONE 0x10
* #define AFCFEI_AFCAUTOCLEAR_ON 0x08
* #define AFCFEI_AFCAUTOCLEAR_OFF 0x00 // Default
*
* #define AFCFEI_AFCAUTO_ON 0x04
* #define AFCFEI_AFCAUTO_OFF 0x00 // Default
*
* #define AFCFEI_AFC_CLEAR 0x02
* #define AFCFEI_AFC_START 0x01
*
* // RegRssiConfig
* #define RSSI_FASTRX_ON 0x08
* #define RSSI_FASTRX_OFF 0x00 // Default
* #define RSSI_DONE 0x02
* #define RSSI_START 0x01
*/
/* RegDioMapping1 */
#define MASK_DIO0 0xC0
......@@ -422,66 +422,66 @@
#define PACKETCONFIG1_ADDRESSFILTERING_NODEBROADCAST 0x04
/*
// RegAutoModes
#define AUTOMODES_ENTER_OFF 0x00 // Default
#define AUTOMODES_ENTER_FIFONOTEMPTY 0x20
#define AUTOMODES_ENTER_FIFOLEVEL 0x40
#define AUTOMODES_ENTER_CRCOK 0x60
#define AUTOMODES_ENTER_PAYLOADREADY 0x80
#define AUTOMODES_ENTER_SYNCADRSMATCH 0xA0
#define AUTOMODES_ENTER_PACKETSENT 0xC0
#define AUTOMODES_ENTER_FIFOEMPTY 0xE0
#define AUTOMODES_EXIT_OFF 0x00 // Default
#define AUTOMODES_EXIT_FIFOEMPTY 0x04
#define AUTOMODES_EXIT_FIFOLEVEL 0x08
#define AUTOMODES_EXIT_CRCOK 0x0C
#define AUTOMODES_EXIT_PAYLOADREADY 0x10
#define AUTOMODES_EXIT_SYNCADRSMATCH 0x14
#define AUTOMODES_EXIT_PACKETSENT 0x18
#define AUTOMODES_EXIT_RXTIMEOUT 0x1C
#define AUTOMODES_INTERMEDIATE_SLEEP 0x00 // Default
#define AUTOMODES_INTERMEDIATE_STANDBY 0x01
#define AUTOMODES_INTERMEDIATE_RECEIVER 0x02
#define AUTOMODES_INTERMEDIATE_TRANSMITTER 0x03
*/
* // RegAutoModes
* #define AUTOMODES_ENTER_OFF 0x00 // Default
* #define AUTOMODES_ENTER_FIFONOTEMPTY 0x20
* #define AUTOMODES_ENTER_FIFOLEVEL 0x40
* #define AUTOMODES_ENTER_CRCOK 0x60
* #define AUTOMODES_ENTER_PAYLOADREADY 0x80
* #define AUTOMODES_ENTER_SYNCADRSMATCH 0xA0
* #define AUTOMODES_ENTER_PACKETSENT 0xC0
* #define AUTOMODES_ENTER_FIFOEMPTY 0xE0
*
* #define AUTOMODES_EXIT_OFF 0x00 // Default
* #define AUTOMODES_EXIT_FIFOEMPTY 0x04
* #define AUTOMODES_EXIT_FIFOLEVEL 0x08
* #define AUTOMODES_EXIT_CRCOK 0x0C
* #define AUTOMODES_EXIT_PAYLOADREADY 0x10
* #define AUTOMODES_EXIT_SYNCADRSMATCH 0x14
* #define AUTOMODES_EXIT_PACKETSENT 0x18
* #define AUTOMODES_EXIT_RXTIMEOUT 0x1C
*
* #define AUTOMODES_INTERMEDIATE_SLEEP 0x00 // Default
* #define AUTOMODES_INTERMEDIATE_STANDBY 0x01
* #define AUTOMODES_INTERMEDIATE_RECEIVER 0x02
* #define AUTOMODES_INTERMEDIATE_TRANSMITTER 0x03
*
*/
/* RegFifoThresh (0x3c) */
#define MASK_FIFO_THRESH_TXSTART 0x80
#define MASK_FIFO_THRESH_VALUE 0x7F
/*
// RegPacketConfig2
#define PACKET2_RXRESTARTDELAY_1BIT 0x00 // Default
#define PACKET2_RXRESTARTDELAY_2BITS 0x10
#define PACKET2_RXRESTARTDELAY_4BITS 0x20
#define PACKET2_RXRESTARTDELAY_8BITS 0x30
#define PACKET2_RXRESTARTDELAY_16BITS 0x40
#define PACKET2_RXRESTARTDELAY_32BITS 0x50
#define PACKET2_RXRESTARTDELAY_64BITS 0x60
#define PACKET2_RXRESTARTDELAY_128BITS 0x70
#define PACKET2_RXRESTARTDELAY_256BITS 0x80
#define PACKET2_RXRESTARTDELAY_512BITS 0x90
#define PACKET2_RXRESTARTDELAY_1024BITS 0xA0
#define PACKET2_RXRESTARTDELAY_2048BITS 0xB0
#define PACKET2_RXRESTARTDELAY_NONE 0xC0
#define PACKET2_RXRESTART 0x04
#define PACKET2_AUTORXRESTART_ON 0x02 // Default
#define PACKET2_AUTORXRESTART_OFF 0x00
#define PACKET2_AES_ON 0x01
#define PACKET2_AES_OFF 0x00 // Default
// RegTemp1
#define TEMP1_MEAS_START 0x08
#define TEMP1_MEAS_RUNNING 0x04
#define TEMP1_ADCLOWPOWER_ON 0x01 // Default
#define TEMP1_ADCLOWPOWER_OFF 0x00
*/
*
* // RegPacketConfig2
* #define PACKET2_RXRESTARTDELAY_1BIT 0x00 // Default
* #define PACKET2_RXRESTARTDELAY_2BITS 0x10
* #define PACKET2_RXRESTARTDELAY_4BITS 0x20
* #define PACKET2_RXRESTARTDELAY_8BITS 0x30
* #define PACKET2_RXRESTARTDELAY_16BITS 0x40
* #define PACKET2_RXRESTARTDELAY_32BITS 0x50
* #define PACKET2_RXRESTARTDELAY_64BITS 0x60
* #define PACKET2_RXRESTARTDELAY_128BITS 0x70
* #define PACKET2_RXRESTARTDELAY_256BITS 0x80
* #define PACKET2_RXRESTARTDELAY_512BITS 0x90
* #define PACKET2_RXRESTARTDELAY_1024BITS 0xA0
* #define PACKET2_RXRESTARTDELAY_2048BITS 0xB0
* #define PACKET2_RXRESTARTDELAY_NONE 0xC0
* #define PACKET2_RXRESTART 0x04
*
* #define PACKET2_AUTORXRESTART_ON 0x02 // Default
* #define PACKET2_AUTORXRESTART_OFF 0x00
*
* #define PACKET2_AES_ON 0x01
* #define PACKET2_AES_OFF 0x00 // Default
*
*
* // RegTemp1
* #define TEMP1_MEAS_START 0x08
* #define TEMP1_MEAS_RUNNING 0x04
* #define TEMP1_ADCLOWPOWER_ON 0x01 // Default
* #define TEMP1_ADCLOWPOWER_OFF 0x00
*/
// RegTestDagc (0x6F)
#define DAGC_NORMAL 0x00 /* Reset value */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment