Commit 05752890 authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

[media] dvb_usb_v2: remote controller changes

Add .get_rc_config() callback and remove old static configs.
Refactor remote controller routines.
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 19b308c0
......@@ -157,16 +157,14 @@ struct dvb_usb_adapter_properties {
* @rc_interval: time in ms between two queries.
* @bulk_mode: device supports bulk mode for RC (disable polling mode)
*/
struct dvb_rc {
char *rc_codes;
u64 protocol;
struct dvb_usb_rc {
char *map_name;
u64 allowed_protos;
enum rc_driver_type driver_type;
int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
char *module_name;
int (*rc_query) (struct dvb_usb_device *d);
int rc_interval;
bool bulk_mode; /* uses bulk mode */
int (*query) (struct dvb_usb_device *d);
int interval;
const enum rc_driver_type driver_type;
bool bulk_mode;
};
/**
......@@ -207,6 +205,7 @@ struct dvb_rc {
*/
#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
struct dvb_usb_device_properties {
const char *driver_name;
struct module *owner;
short *adapter_nr;
......@@ -234,18 +233,18 @@ struct dvb_usb_device_properties {
int (*power_ctrl) (struct dvb_usb_device *, int);
int (*read_config) (struct dvb_usb_device *d);
int (*read_mac_address) (struct dvb_usb_device *, u8 []);
int (*tuner_attach) (struct dvb_frontend *);
#define WARM 0
#define COLD 1
int (*identify_state) (struct dvb_usb_device *);
int (*init) (struct dvb_usb_device *);
int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *);
struct i2c_algorithm *i2c_algo;
int generic_bulk_ctrl_endpoint;
int generic_bulk_ctrl_endpoint_response;
struct dvb_rc rc;
};
/**
......@@ -373,6 +372,7 @@ struct dvb_usb_device {
struct dvb_usb_device_properties props;
const char *name;
const char *rc_map;
struct dvb_usb_rc rc;
struct usb_device *udev;
#define DVB_USB_STATE_INIT 0x000
......
......@@ -16,9 +16,9 @@
*/
static void dvb_usb_read_remote_control(struct work_struct *work)
{
struct dvb_usb_device *d =
container_of(work, struct dvb_usb_device, rc_query_work.work);
int err;
struct dvb_usb_device *d = container_of(work,
struct dvb_usb_device, rc_query_work.work);
int ret;
/* TODO: need a lock here. We can simply skip checking for the remote
control if we're busy. */
......@@ -26,87 +26,82 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
/* when the parameter has been set to 1 via sysfs while the
* driver was running, or when bulk mode is enabled after IR init
*/
if (dvb_usb_disable_rc_polling || d->props.rc.bulk_mode)
if (dvb_usb_disable_rc_polling || d->rc.bulk_mode)
return;
err = d->props.rc.rc_query(d);
if (err)
err("error %d while querying for an remote control event.",
err);
ret = d->rc.query(d);
if (ret < 0)
err("error %d while querying for an remote control event", ret);
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(d->props.rc.rc_interval));
msecs_to_jiffies(d->rc.interval));
}
static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
int dvb_usb_remote_init(struct dvb_usb_device *d)
{
int err, rc_interval;
int ret;
struct rc_dev *dev;
if (dvb_usb_disable_rc_polling || !d->props.get_rc_config)
return 0;
ret = d->props.get_rc_config(d, &d->rc);
if (ret < 0)
goto err;
dev = rc_allocate_device();
if (!dev)
return -ENOMEM;
dev->driver_name = d->props.rc.module_name;
dev->map_name = d->rc_map;
dev->change_protocol = d->props.rc.change_protocol;
dev->allowed_protos = d->props.rc.allowed_protos;
dev->driver_type = d->props.rc.driver_type;
usb_to_input_id(d->udev, &dev->input_id);
if (!dev) {
ret = -ENOMEM;
goto err;
}
dev->dev.parent = &d->udev->dev;
dev->input_name = "IR-receiver inside an USB DVB receiver";
usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
dev->input_phys = d->rc_phys;
dev->dev.parent = &d->udev->dev;
usb_to_input_id(d->udev, &dev->input_id);
/* TODO: likely RC-core should took const char * */
dev->driver_name = (char *) d->props.driver_name;
dev->driver_type = d->rc.driver_type;
dev->allowed_protos = d->rc.allowed_protos;
dev->change_protocol = d->rc.change_protocol;
dev->priv = d;
/* leave remote controller enabled even there is no default map */
if (dev->map_name == NULL)
dev->map_name = RC_MAP_EMPTY;
err = rc_register_device(dev);
if (err < 0) {
/* select used keymap */
if (d->rc.map_name)
dev->map_name = d->rc.map_name;
else if (d->rc_map)
dev->map_name = d->rc_map;
else
dev->map_name = RC_MAP_EMPTY; /* keep rc enabled */
ret = rc_register_device(dev);
if (ret < 0) {
rc_free_device(dev);
return err;
goto err;
}
d->input_dev = NULL;
d->rc_dev = dev;
if (!d->props.rc.rc_query || d->props.rc.bulk_mode)
return 0;
/* Polling mode - initialize a work queue for handling it */
INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
/* start polling if needed */
if (d->rc.query && !d->rc.bulk_mode) {
/* initialize a work queue for handling polling */
INIT_DELAYED_WORK(&d->rc_query_work,
dvb_usb_read_remote_control);
rc_interval = d->props.rc.rc_interval;
info("schedule remote query interval to %d msecs.", rc_interval);
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
return 0;
}
int dvb_usb_remote_init(struct dvb_usb_device *d)
{
int err;
if (dvb_usb_disable_rc_polling)
return 0;
if (d->props.rc.module_name == NULL)
return 0;
usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
/* Start the remote-control polling. */
err = rc_core_dvb_usb_remote_init(d);
if (err)
return err;
info("schedule remote query interval to %d msecs",
d->rc.interval);
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(d->rc.interval));
}
d->state |= DVB_USB_STATE_REMOTE;
return 0;
err:
pr_debug("%s: failed=%d\n", __func__, ret);
return ret;
}
int dvb_usb_remote_exit(struct dvb_usb_device *d)
......@@ -115,6 +110,8 @@ int dvb_usb_remote_exit(struct dvb_usb_device *d)
cancel_delayed_work_sync(&d->rc_query_work);
rc_unregister_device(d->rc_dev);
}
d->state &= ~DVB_USB_STATE_REMOTE;
return 0;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment