Commit 05de55a4 authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://bk.linux1394.org/ieee1394-2.6

into ppc970.osdl.org:/home/torvalds/v2.5/linux
parents 56880b13 6ed71734
......@@ -421,9 +421,9 @@ config PM
Power Management is most important for battery powered laptop
computers; if you have a laptop, check out the Linux Laptop home
page on the WWW at
<http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
Battery Powered Linux mini-HOWTO, available from
page on the WWW at <http://www.linux-on-laptops.com/> or
Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>
and the Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that, even if you say N here, Linux on the x86 architecture
......
......@@ -91,10 +91,28 @@ config CPU_ARM922T
Say Y if you want support for the ARM922T processor.
Otherwise, say N.
# ARM925T
config CPU_ARM925T
bool
depends on ARCH_OMAP1510
default y
select CPU_32v4
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_COPY_V4WB
select CPU_TLB_V4WBI
help
The ARM925T is a mix between the ARM920T and ARM926T, but with
different instruction and data caches. It is used in TI's OMAP
device family.
Say Y if you want support for the ARM925T processor.
Otherwise, say N.
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
depends on ARCH_INTEGRATOR
depends on ARCH_INTEGRATOR || ARCH_OMAP1610
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_COPY_V4WB
......@@ -288,7 +306,7 @@ comment "Processor Features"
config ARM_THUMB
bool "Support Thumb user binaries"
depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE
depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE
default y
help
Say Y if you want to include kernel support for running user space
......@@ -311,21 +329,21 @@ config CPU_BIG_ENDIAN
config CPU_ICACHE_DISABLE
bool "Disable I-Cache"
depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM926T || CPU_ARM1020
depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
help
Say Y here to disable the processor instruction cache. Unless
you have a reason not to or are unsure, say N.
config CPU_DCACHE_DISABLE
bool "Disable D-Cache"
depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM926T || CPU_ARM1020
depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
help
Say Y here to disable the processor data cache. Unless
you have a reason not to or are unsure, say N.
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
help
Say Y here to use the data cache in writethough mode. Unless you
specifically require this or are unsure, say N.
......
......@@ -39,6 +39,7 @@ obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o
obj-$(CONFIG_CPU_ARM920T) += proc-arm920.o
obj-$(CONFIG_CPU_ARM922T) += proc-arm922.o
obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o
obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
......
This diff is collapsed.
......@@ -311,9 +311,6 @@ static struct i2c_adapter ioc_ops = {
.algo_data = &ioc_data,
.client_register = ioc_client_reg,
.client_unregister = ioc_client_unreg,
.dev = {
.name = "IOC/IOMD",
},
};
static int __init i2c_ioc_init(void)
......
......@@ -37,8 +37,7 @@ static struct i2c_client_address_data addr_data = {
#define DAT(x) ((unsigned int)(x->dev.driver_data))
static int
pcf8583_attach(struct i2c_adapter *adap, int addr, unsigned short flags,
int kind)
pcf8583_attach(struct i2c_adapter *adap, int addr, int kind)
{
struct i2c_client *c;
unsigned char buf[1], ad[1] = { 0 };
......@@ -51,13 +50,11 @@ pcf8583_attach(struct i2c_adapter *adap, int addr, unsigned short flags,
if (!c)
return -ENOMEM;
strcpy(c->dev.name, "PCF8583");
memset(c, 0, sizeof(*c));
c->id = pcf8583_driver.id;
c->flags = 0;
c->addr = addr;
c->adapter = adap;
c->driver = &pcf8583_driver;
c->dev.driver_data = NULL;
if (i2c_transfer(c->adapter, msgs, 2) == 2)
DAT(c) = buf[0];
......
......@@ -33,7 +33,6 @@ struct amba_kmi_port {
unsigned int irq;
unsigned int divisor;
unsigned int open;
struct resource *res;
};
static irqreturn_t amba_kmi_int(int irq, void *dev_id, struct pt_regs *regs)
......@@ -97,10 +96,17 @@ static void amba_kmi_close(struct serio *io)
static int amba_kmi_probe(struct amba_device *dev, void *id)
{
struct amba_kmi_port *kmi;
int ret;
ret = amba_request_regions(dev, NULL);
if (ret)
return ret;
kmi = kmalloc(sizeof(struct amba_kmi_port), GFP_KERNEL);
if (!kmi)
return -ENOMEM;
if (!kmi) {
ret = -ENOMEM;
goto out;
}
memset(kmi, 0, sizeof(struct amba_kmi_port));
......@@ -112,26 +118,24 @@ static int amba_kmi_probe(struct amba_device *dev, void *id)
kmi->io.phys = dev->dev.bus_id;
kmi->io.driver = kmi;
kmi->res = request_mem_region(dev->res.start, KMI_SIZE, "kmi-pl050");
if (!kmi->res) {
kfree(kmi);
return -EBUSY;
}
kmi->base = ioremap(dev->res.start, KMI_SIZE);
if (!kmi->base) {
release_resource(kmi->res);
kfree(kmi);
return -ENOMEM;
ret = -ENOMEM;
goto out;
}
kmi->irq = dev->irq;
kmi->irq = dev->irq[0];
kmi->divisor = 24 / 8 - 1;
amba_set_drvdata(dev, kmi);
serio_register_port(&kmi->io);
return 0;
out:
kfree(kmi);
amba_release_regions(dev);
return ret;
}
static int amba_kmi_remove(struct amba_device *dev)
......@@ -142,8 +146,8 @@ static int amba_kmi_remove(struct amba_device *dev)
serio_unregister_port(&kmi->io);
iounmap(kmi->base);
release_resource(kmi->res);
kfree(kmi);
amba_release_regions(dev);
return 0;
}
......
......@@ -324,6 +324,29 @@ config SERIAL_UART00_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_PXA
bool "PXA serial port support"
depends on ARM && ARCH_PXA
select SERIAL_CORE
help
If you have a machine based on an Intel XScale PXA2xx CPU you
can enable its onboard serial ports by enabling this option.
config SERIAL_PXA_CONSOLE
bool "Console on PXA serial port"
depends on SERIAL_PXA
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the Intel XScale PXA
CPU you can make it the console by answering Y to this option.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttySA0". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_SA1100
bool "SA1100 serial port support"
depends on ARM && ARCH_SA1100
......
......@@ -19,6 +19,7 @@ obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
obj-$(CONFIG_SERIAL_ANAKIN) += anakin.o
obj-$(CONFIG_SERIAL_AMBA) += amba.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_UART00) += uart00.o
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
......
This diff is collapsed.
......@@ -3,23 +3,10 @@
#ifdef __KERNEL__
#include <linux/config.h>
#include <linux/dma-mapping.h>
#include <asm-generic/pci-dma-compat.h>
#include <asm/hardware.h> /* for PCIBIOS_MIN_* */
#ifdef CONFIG_SA1111
/*
* Keep the SA1111 DMA-mapping tricks until the USB layer gets
* properly converted to the new DMA-mapping API, at which time
* most of this file can die.
*/
#define SA1111_FAKE_PCIDEV ((struct pci_dev *) 1111)
#define pcidev_is_sa1111(dev) (dev == SA1111_FAKE_PCIDEV)
#else
#define pcidev_is_sa1111(dev) (0)
#endif
#define pcibios_scan_all_fns(a, b) 0
static inline void pcibios_set_master(struct pci_dev *dev)
......@@ -39,144 +26,21 @@ static inline void pcibios_penalize_isa_irq(int irq)
*/
#define PCI_DMA_BUS_IS_PHYS (0)
static inline void *
pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *handle)
{
int gfp = GFP_ATOMIC;
if (hwdev == NULL || pcidev_is_sa1111(hwdev) ||
hwdev->dma_mask != 0xffffffff)
gfp |= GFP_DMA;
return consistent_alloc(gfp, size, handle, 0);
}
static inline void
pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr,
dma_addr_t handle)
{
dma_free_coherent(hwdev ? &hwdev->dev : NULL, size, vaddr, handle);
}
static inline dma_addr_t
pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int dir)
{
if (pcidev_is_sa1111(hwdev))
return sa1111_map_single(ptr, size, dir);
return dma_map_single(hwdev ? &hwdev->dev : NULL, ptr, size, dir);
}
static inline void
pci_unmap_single(struct pci_dev *hwdev, dma_addr_t handle, size_t size, int dir)
{
if (pcidev_is_sa1111(hwdev)) {
sa1111_unmap_single(handle, size, dir);
return;
}
dma_unmap_single(hwdev ? &hwdev->dev : NULL, handle, size, dir);
}
static inline int
pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int dir)
{
if (pcidev_is_sa1111(hwdev))
return sa1111_map_sg(sg, nents, dir);
return dma_map_sg(hwdev ? &hwdev->dev : NULL, sg, nents, dir);
}
static inline void
pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int dir)
{
if (pcidev_is_sa1111(hwdev)) {
sa1111_unmap_sg(sg, nents, dir);
return;
}
return dma_unmap_sg(hwdev ? &hwdev->dev : NULL, sg, nents, dir);
}
static inline dma_addr_t
pci_map_page(struct pci_dev *hwdev, struct page *page, unsigned long offset,
size_t size, int dir)
{
return pci_map_single(hwdev, page_address(page) + offset, size, dir);
}
static inline void
pci_unmap_page(struct pci_dev *hwdev, dma_addr_t handle, size_t size, int dir)
{
return pci_unmap_single(hwdev, handle, size, dir);
}
static inline void
pci_dma_sync_single(struct pci_dev *hwdev, dma_addr_t handle, size_t size, int dir)
{
if (pcidev_is_sa1111(hwdev)) {
sa1111_dma_sync_single(handle, size, dir);
return;
}
return dma_sync_single(hwdev ? &hwdev->dev : NULL, handle, size, dir);
}
static inline void
pci_dma_sync_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int dir)
{
if (pcidev_is_sa1111(hwdev)) {
sa1111_dma_sync_sg(sg, nelems, dir);
return;
}
return dma_sync_sg(hwdev ? &hwdev->dev : NULL, sg, nelems, dir);
}
static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
{
return 1;
}
/*
* We don't support DAC DMA cycles.
*/
#define pci_dac_dma_supported(pci_dev, mask) (0)
#if defined(CONFIG_SA1111) && !defined(CONFIG_PCI)
/*
* SA-1111 needs these prototypes even when !defined(CONFIG_PCI)
*
* kmem_cache style wrapper around pci_alloc_consistent()
*/
struct pci_pool *pci_pool_create (const char *name, struct pci_dev *dev,
size_t size, size_t align, size_t allocation);
void pci_pool_destroy (struct pci_pool *pool);
void *pci_pool_alloc (struct pci_pool *pool, int flags, dma_addr_t *handle);
void pci_pool_free (struct pci_pool *pool, void *vaddr, dma_addr_t addr);
#endif
/*
* Whether pci_unmap_{single,page} is a nop depends upon the
* configuration.
*/
#if defined(CONFIG_PCI) || defined(CONFIG_SA1111)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
#else
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
......
......@@ -46,6 +46,7 @@
* separate so any additions to the old serial.c that occur before
* we are merged can be easily merged here.
*/
#define PORT_PXA 31
#define PORT_AMBA 32
#define PORT_CLPS711X 33
#define PORT_SA1100 34
......
......@@ -140,6 +140,21 @@
#define UART_MSR_DCTS 0x01 /* Delta CTS */
#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
/*
* The Intel PXA2xx chip defines those bits
*/
#define UART_IER_DMAE 0x80 /* DMA Requests Enable */
#define UART_IER_UUE 0x40 /* UART Unit Enable */
#define UART_IER_NRZE 0x20 /* NRZ coding Enable */
#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */
#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */
#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */
#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */
#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */
/*
* These are the definitions for the Extended Features Register
* (StarTech 16C660 only, when DLAB=1)
......
......@@ -324,9 +324,10 @@ static int vidc_audio_prepare_for_input(int dev, int bsize, int bcount)
return -EINVAL;
}
static void vidc_audio_dma_interrupt(void)
static irqreturn_t vidc_audio_dma_interrupt(void)
{
DMAbuf_outputintr(vidc_adev, 1);
return IRQ_HANDLED;
}
/*
......
......@@ -50,7 +50,7 @@ extern unsigned long (*vidc_filler) (unsigned long ibuf, unsigned long iend,
* Virtual DMA buffer exhausted
*/
extern void (*dma_interrupt) (void);
extern irqreturn_t (*dma_interrupt) (void);
/*
* Virtual DMA buffer addresses
......
......@@ -133,10 +133,6 @@ ENTRY(vidc_clear)
* ip = corrupted
*/
%%%%%%%%%%%%%%%%%%%
fixme! This funtion needs to return IRQ_HANDLED
%%%%%%%%%%%%%%%%%%%
ENTRY(vidc_sound_dma_irq)
stmfd sp!, {r4 - r8, lr}
ldr r8, =dma_start
......@@ -189,6 +185,7 @@ ENTRY(vidc_sound_dma_irq)
mov r0, #0x10
strneb r0, [ip, #IOMD_SD0CR]
ldmfd sp!, {r4 - r8, lr}
mov r0, #1 @ IRQ_HANDLED
teq r1, #0 @ If we have no more
movne pc, lr
teq r3, #0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment