Merge branch 'stmp' into devel

arch/arm/Kconfig

@@ -298,6 +298,19 @@ config ARCH_MXC
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
+config ARCH_STMP3XXX
+	bool "Freescale STMP3xxx"
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select USB_ARCH_HAS_EHCI
+	help
+	  Support for systems based on the Freescale 3xxx CPUs.
+
 config ARCH_NETX
 	bool "Hilscher NetX based"
 	select CPU_ARM926T
@@ -673,6 +686,8 @@ source "arch/arm/mach-s3c6400/Kconfig"
 source "arch/arm/mach-s3c6410/Kconfig"
 endif
 
+source "arch/arm/plat-stmp3xxx/Kconfig"
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"

arch/arm/Makefile

@@ -152,6 +152,8 @@ machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
+machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
@@ -165,6 +167,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

arch/arm/mach-stmp378x/Makefile

+obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
+obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o

arch/arm/mach-stmp378x/Makefile.boot

+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000

arch/arm/mach-stmp378x/include/mach/entry-macro.S

+/*
+ * Low-level IRQ helper macros for Freescale STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x70]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x7f
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm

arch/arm/mach-stmp378x/include/mach/irqs.h

+/*
+ * Freescale STMP378X interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#define IRQ_DEBUG_UART			0
+#define IRQ_COMMS_RX			1
+#define IRQ_COMMS_TX			1
+#define IRQ_SSP2_ERROR			2
+#define IRQ_VDD5V			3
+#define IRQ_HEADPHONE_SHORT		4
+#define IRQ_DAC_DMA			5
+#define IRQ_DAC_ERROR			6
+#define IRQ_ADC_DMA			7
+#define IRQ_ADC_ERROR			8
+#define IRQ_SPDIF_DMA			9
+#define IRQ_SAIF2_DMA			9
+#define IRQ_SPDIF_ERROR			10
+#define IRQ_SAIF1_IRQ			10
+#define IRQ_SAIF2_IRQ			10
+#define IRQ_USB_CTRL			11
+#define IRQ_USB_WAKEUP			12
+#define IRQ_GPMI_DMA			13
+#define IRQ_SSP1_DMA			14
+#define IRQ_SSP_ERROR			15
+#define IRQ_GPIO0			16
+#define IRQ_GPIO1			17
+#define IRQ_GPIO2			18
+#define IRQ_SAIF1_DMA			19
+#define IRQ_SSP2_DMA			20
+#define IRQ_ECC8_IRQ			21
+#define IRQ_RTC_ALARM			22
+#define IRQ_UARTAPP_TX_DMA		23
+#define IRQ_UARTAPP_INTERNAL		24
+#define IRQ_UARTAPP_RX_DMA		25
+#define IRQ_I2C_DMA			26
+#define IRQ_I2C_ERROR			27
+#define IRQ_TIMER0			28
+#define IRQ_TIMER1			29
+#define IRQ_TIMER2			30
+#define IRQ_TIMER3			31
+#define IRQ_BATT_BRNOUT			32
+#define IRQ_VDDD_BRNOUT			33
+#define IRQ_VDDIO_BRNOUT		34
+#define IRQ_VDD18_BRNOUT		35
+#define IRQ_TOUCH_DETECT		36
+#define IRQ_LRADC_CH0			37
+#define IRQ_LRADC_CH1			38
+#define IRQ_LRADC_CH2			39
+#define IRQ_LRADC_CH3			40
+#define IRQ_LRADC_CH4			41
+#define IRQ_LRADC_CH5			42
+#define IRQ_LRADC_CH6			43
+#define IRQ_LRADC_CH7			44
+#define IRQ_LCDIF_DMA			45
+#define IRQ_LCDIF_ERROR			46
+#define IRQ_DIGCTL_DEBUG_TRAP		47
+#define IRQ_RTC_1MSEC			48
+#define IRQ_DRI_DMA			49
+#define IRQ_DRI_ATTENTION		50
+#define IRQ_GPMI_ATTENTION		51
+#define IRQ_IR				52
+#define IRQ_DCP_VMI			53
+#define IRQ_DCP				54
+#define IRQ_BCH				56
+#define IRQ_PXP				57
+#define IRQ_UARTAPP2_TX_DMA		58
+#define IRQ_UARTAPP2_INTERNAL		59
+#define IRQ_UARTAPP2_RX_DMA		60
+#define IRQ_VDAC_DETECT			61
+#define IRQ_VDD5V_DROOP			64
+#define IRQ_DCDC4P2_BO			65
+
+
+#define NR_REAL_IRQS	128
+#define NR_IRQS		(NR_REAL_IRQS + 32 * 3)
+
+/* All interrupts are FIQ capable */
+#define FIQ_START		IRQ_DEBUG_UART
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION

arch/arm/mach-stmp378x/include/mach/pins.h

+/*
+ * Freescale STMP378X SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_CLE		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_ALE		STMP3XXX_PINID(0, 17)
+#define PINID_GMPI_CE2N		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY1		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_WPN		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_AUART1_CTS	STMP3XXX_PINID(0, 26)
+#define PINID_AUART1_RTS	STMP3XXX_PINID(0, 27)
+#define PINID_AUART1_RX		STMP3XXX_PINID(0, 28)
+#define PINID_AUART1_TX		STMP3XXX_PINID(0, 29)
+#define PINID_I2C_SCL		STMP3XXX_PINID(0, 30)
+#define PINID_I2C_SDA		STMP3XXX_PINID(0, 31)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_D16		STMP3XXX_PINID(1, 16)
+#define PINID_LCD_D17		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_RESET		STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_WR		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 21)
+#define PINID_LCD_DOTCK		STMP3XXX_PINID(1, 22)
+#define PINID_LCD_ENABLE	STMP3XXX_PINID(1, 23)
+#define PINID_LCD_HSYNC		STMP3XXX_PINID(1, 24)
+#define PINID_LCD_VSYNC		STMP3XXX_PINID(1, 25)
+#define PINID_PWM0		STMP3XXX_PINID(1, 26)
+#define PINID_PWM1		STMP3XXX_PINID(1, 27)
+#define PINID_PWM2		STMP3XXX_PINID(1, 28)
+#define PINID_PWM3		STMP3XXX_PINID(1, 29)
+#define PINID_PWM4		STMP3XXX_PINID(1, 30)
+
+/* Bank 2 */
+#define PINID_SSP1_CMD		STMP3XXX_PINID(2, 0)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(2, 1)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(2, 2)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(2, 3)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(2, 4)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(2, 5)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(2, 6)
+#define PINID_ROTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_BA0		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_BA1		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 26)
+#define PINID_GPMI_CE1N		STMP3XXX_PINID(2, 27)
+#define PINID_GPMI_CE0N		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */

arch/arm/mach-stmp378x/include/mach/regs-apbh.h

+/*
+ * stmp378x: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+#define REGS_APBH_PHYS	0x80004000
+#define REGS_APBH_SIZE	0x2000
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_CTRL2		0x20
+
+#define HW_APBH_DEVSEL		0x30
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBH_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBH_CHn_CMD_COMMAND	0x00000003
+#define BP_APBH_CHn_CMD_COMMAND	0
+#define BM_APBH_CHn_CMD_CHAIN	0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif

arch/arm/mach-stmp378x/include/mach/regs-apbx.h

+/*
+ * stmp378x: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+#define REGS_APBX_PHYS	0x80024000
+#define REGS_APBX_SIZE	0x2000
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_CTRL2		0x20
+
+#define HW_APBX_CHANNEL_CTRL	0x30
+#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL	0xFFFF0000
+#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL	16
+
+#define HW_APBX_DEVSEL		0x40
+
+#define HW_APBX_CH0_NXTCMDAR	(0x110 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x110 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x110 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x110 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x110 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x110 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x110 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x110 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x110 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x110 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x110 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x110 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x110 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x110 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x110 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x110 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x110
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBX_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_HALTONTERMINATE	0x00000100
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x130 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x130 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x130 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x130 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x130 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x130 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x130 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x130 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x130 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x130 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x130 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x130 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x130 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x130 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x130 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x130 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x130
+
+#define HW_APBX_CH0_SEMA	(0x140 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x140 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x140 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x140 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x140 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x140 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x140 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x140 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x140 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x140 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x140 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x140 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x140 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x140 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x140 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x140 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x140
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
+

arch/arm/mach-stmp378x/include/mach/regs-audioin.h

+/*
+ * stmp378x: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+#define REGS_AUDIOIN_PHYS	0x8004C000
+#define REGS_AUDIOIN_SIZE	0x2000
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80

arch/arm/mach-stmp378x/include/mach/regs-audioout.h

+/*
+ * stmp378x: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+#define REGS_AUDIOOUT_PHYS	0x80048000
+#define REGS_AUDIOOUT_SIZE	0x2000
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_SPEAKER	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_SPEAKERCTRL	0x100
+#define BM_AUDIOOUT_SPEAKERCTRL_MUTE	0x01000000
+
+#define HW_AUDIOOUT_VERSION	0x200

arch/arm/mach-stmp378x/include/mach/regs-bch.h

+/*
+ * stmp378x: BCH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_BCH_BASE	(STMP3XXX_REGS_BASE + 0xA000)
+#define REGS_BCH_PHYS	0x8000A000
+#define REGS_BCH_SIZE	0x2000
+
+#define HW_BCH_CTRL		0x0
+#define BM_BCH_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_BCH_CTRL_COMPLETE_IRQ	0
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN	0x00000100
+
+#define HW_BCH_STATUS0		0x10
+#define BM_BCH_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_BCH_STATUS0_CORRECTED	0x00000008
+#define BM_BCH_STATUS0_STATUS_BLK0	0x0000FF00
+#define BP_BCH_STATUS0_STATUS_BLK0	8
+#define BM_BCH_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_BCH_STATUS0_COMPLETED_CE	16
+
+#define HW_BCH_LAYOUTSELECT	0x70
+
+#define HW_BCH_FLASH0LAYOUT0	0x80
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE	0
+#define BM_BCH_FLASH0LAYOUT0_ECC0	0x0000F000
+#define BP_BCH_FLASH0LAYOUT0_ECC0	12
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE	0x00FF0000
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE	16
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS	0xFF000000
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS	24
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE	0
+#define BM_BCH_FLASH0LAYOUT1_ECCN	0x0000F000
+#define BP_BCH_FLASH0LAYOUT1_ECCN	12
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE	0xFFFF0000
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE	16
+
+#define HW_BCH_BLOCKNAME	0x150

arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h

+/*
+ * stmp378x: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+#define REGS_CLKCTRL_PHYS	0x80040000
+#define REGS_CLKCTRL_SIZE	0x2000
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00000FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
+#define BP_CLKCTRL_EMI_DIV_EMI	0
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_TV		0xD0
+
+#define HW_CLKCTRL_ETM		0xE0
+
+#define HW_CLKCTRL_FRAC		0xF0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_FRAC1	0x100
+
+#define HW_CLKCTRL_CLKSEQ	0x110
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0x120
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif

arch/arm/mach-stmp378x/include/mach/regs-dcp.h

+/*
+ * stmp378x: DCP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DCP_BASE	(STMP3XXX_REGS_BASE + 0x28000)
+#define REGS_DCP_PHYS	0x80028000
+#define REGS_DCP_SIZE	0x2000
+
+#define HW_DCP_CTRL		0x0
+#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0x000000FF
+#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0
+#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING	0x00400000
+#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES	0x00800000
+#define BM_DCP_CTRL_CLKGATE	0x40000000
+#define BM_DCP_CTRL_SFTRST	0x80000000
+
+#define HW_DCP_STAT		0x10
+#define BM_DCP_STAT_IRQ		0x0000000F
+#define BP_DCP_STAT_IRQ		0
+
+#define HW_DCP_CHANNELCTRL	0x20
+#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL	0x000000FF
+#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL	0
+
+#define HW_DCP_CONTEXT		0x50
+#define BM_DCP_PACKET1_INTERRUPT	0x00000001
+#define BP_DCP_PACKET1_INTERRUPT	0
+#define BM_DCP_PACKET1_DECR_SEMAPHORE	0x00000002
+#define BM_DCP_PACKET1_CHAIN	0x00000004
+#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS	0x00000008
+#define BM_DCP_PACKET1_ENABLE_CIPHER	0x00000020
+#define BM_DCP_PACKET1_ENABLE_HASH	0x00000040
+#define BM_DCP_PACKET1_CIPHER_ENCRYPT	0x00000100
+#define BM_DCP_PACKET1_CIPHER_INIT	0x00000200
+#define BM_DCP_PACKET1_OTP_KEY	0x00000400
+#define BM_DCP_PACKET1_PAYLOAD_KEY	0x00000800
+#define BM_DCP_PACKET1_HASH_INIT	0x00001000
+#define BM_DCP_PACKET1_HASH_TERM	0x00002000
+#define BM_DCP_PACKET2_CIPHER_SELECT	0x0000000F
+#define BP_DCP_PACKET2_CIPHER_SELECT	0
+#define BM_DCP_PACKET2_CIPHER_MODE	0x000000F0
+#define BP_DCP_PACKET2_CIPHER_MODE	4
+#define BM_DCP_PACKET2_KEY_SELECT	0x0000FF00
+#define BP_DCP_PACKET2_KEY_SELECT	8
+#define BM_DCP_PACKET2_HASH_SELECT	0x000F0000
+#define BP_DCP_PACKET2_HASH_SELECT	16
+#define BM_DCP_PACKET2_CIPHER_CFG	0xFF000000
+#define BP_DCP_PACKET2_CIPHER_CFG	24
+
+#define HW_DCP_CH0CMDPTR	(0x100 + 0 * 0x40)
+#define HW_DCP_CH1CMDPTR	(0x100 + 1 * 0x40)
+#define HW_DCP_CH2CMDPTR	(0x100 + 2 * 0x40)
+#define HW_DCP_CH3CMDPTR	(0x100 + 3 * 0x40)
+
+#define HW_DCP_CHnCMDPTR	0x100
+
+#define HW_DCP_CH0SEMA		(0x110 + 0 * 0x40)
+#define HW_DCP_CH1SEMA		(0x110 + 1 * 0x40)
+#define HW_DCP_CH2SEMA		(0x110 + 2 * 0x40)
+#define HW_DCP_CH3SEMA		(0x110 + 3 * 0x40)
+
+#define HW_DCP_CHnSEMA		0x110
+#define BM_DCP_CHnSEMA_INCREMENT	0x000000FF
+#define BP_DCP_CHnSEMA_INCREMENT	0
+
+#define HW_DCP_CH0STAT		(0x120 + 0 * 0x40)
+#define HW_DCP_CH1STAT		(0x120 + 1 * 0x40)
+#define HW_DCP_CH2STAT		(0x120 + 2 * 0x40)
+#define HW_DCP_CH3STAT		(0x120 + 3 * 0x40)
+
+#define HW_DCP_CHnSTAT		0x120

arch/arm/mach-stmp378x/include/mach/regs-digctl.h

+/*
+ * stmp378x: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+#define REGS_DIGCTL_PHYS	0x8001C000
+#define REGS_DIGCTL_SIZE	0x2000
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
+
+#define HW_DIGCTL_ARMCACHE	0x2B0
+#define BM_DIGCTL_ARMCACHE_ITAG_SS	0x00000003
+#define BP_DIGCTL_ARMCACHE_ITAG_SS	0
+#define BM_DIGCTL_ARMCACHE_DTAG_SS	0x00000030
+#define BP_DIGCTL_ARMCACHE_DTAG_SS	4
+#define BM_DIGCTL_ARMCACHE_CACHE_SS	0x00000300
+#define BP_DIGCTL_ARMCACHE_CACHE_SS	8
+#define BM_DIGCTL_ARMCACHE_DRTY_SS	0x00003000
+#define BP_DIGCTL_ARMCACHE_DRTY_SS	12
+#define BM_DIGCTL_ARMCACHE_VALID_SS	0x00030000
+#define BP_DIGCTL_ARMCACHE_VALID_SS	16

arch/arm/mach-stmp378x/include/mach/regs-dram.h

+/*
+ * stmp378x: DRAM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRAM_BASE	(STMP3XXX_REGS_BASE + 0xE0000)
+#define REGS_DRAM_PHYS	0x800E0000
+#define REGS_DRAM_SIZE	0x2000
+
+#define HW_DRAM_CTL06		0x18
+
+#define HW_DRAM_CTL08		0x20

arch/arm/mach-stmp378x/include/mach/regs-dri.h

+/*
+ * stmp378x: DRI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRI_BASE	(STMP3XXX_REGS_BASE + 0x74000)
+#define REGS_DRI_PHYS	0x80074000
+#define REGS_DRI_SIZE	0x2000
+
+#define HW_DRI_CTRL		0x0
+#define BM_DRI_CTRL_RUN		0x00000001
+#define BP_DRI_CTRL_RUN		0
+#define BM_DRI_CTRL_ATTENTION_IRQ	0x00000002
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ	0x00000004
+#define BM_DRI_CTRL_OVERFLOW_IRQ	0x00000008
+#define BM_DRI_CTRL_ATTENTION_IRQ_EN	0x00000200
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN	0x00000400
+#define BM_DRI_CTRL_OVERFLOW_IRQ_EN	0x00000800
+#define BM_DRI_CTRL_REACQUIRE_PHASE	0x00008000
+#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR	0x02000000
+#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR	0x04000000
+#define BM_DRI_CTRL_ENABLE_INPUTS	0x20000000
+#define BM_DRI_CTRL_CLKGATE	0x40000000
+#define BM_DRI_CTRL_SFTRST	0x80000000
+
+#define HW_DRI_TIMING		0x10
+#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL	0x000000FF
+#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL	0
+#define BM_DRI_TIMING_PILOT_REP_RATE	0x000F0000
+#define BP_DRI_TIMING_PILOT_REP_RATE	16

arch/arm/mach-stmp378x/include/mach/regs-ecc8.h

+/*
+ * stmp378x: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+#define REGS_ECC8_PHYS	0x80008000
+#define REGS_ECC8_SIZE	0x2000
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20

arch/arm/mach-stmp378x/include/mach/regs-emi.h

+/*
+ * stmp378x: EMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_EMI_BASE	(STMP3XXX_REGS_BASE + 0x20000)
+#define REGS_EMI_PHYS	0x80020000
+#define REGS_EMI_SIZE	0x2000
+
+#define HW_EMI_STAT		0x10

arch/arm/mach-stmp378x/include/mach/regs-gpmi.h

+/*
+ * stmp378x: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_ADDRESS      0x000E0000
+#define BP_GPMI_CTRL0_ADDRESS      17
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA  0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE   0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE   0x2
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT      0x00010000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_BUFFER_MASK	0x000001FF
+#define BP_GPMI_ECCCTRL_BUFFER_MASK	0
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT			0
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT			1
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT			2
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT			3
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000001
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_RDN_DELAY	0x0000F000
+#define BP_GPMI_CTRL1_RDN_DELAY	12
+#define BM_GPMI_CTRL1_BCH_MODE	0x00040000
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+#define BM_GPMI_TIMING0_ADDRESS_SETUP	0x00FF0000
+#define BP_GPMI_TIMING0_ADDRESS_SETUP	16
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16

arch/arm/mach-stmp378x/include/mach/regs-i2c.h

+/*
+ * stmp378x: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90

arch/arm/mach-stmp378x/include/mach/regs-icoll.h

+/*
+ * stmp378x: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+#define REGS_ICOLL_PHYS	0x80000000
+#define REGS_ICOLL_SIZE	0x2000
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+#define BM_ICOLL_LEVELACK_IRQLEVELACK	0x0000000F
+#define BP_ICOLL_LEVELACK_IRQLEVELACK	0
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x70
+
+#define HW_ICOLL_INTERRUPTn	0x120
+
+#define HW_ICOLL_INTERRUPTn	0x120
+#define BM_ICOLL_INTERRUPTn_ENABLE	0x00000004
+
+#endif

arch/arm/mach-stmp378x/include/mach/regs-ir.h

+/*
+ * stmp378x: IR register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_IR_BASE	(STMP3XXX_REGS_BASE + 0x78000)
+#define REGS_IR_PHYS	0x80078000
+#define REGS_IR_SIZE	0x2000

arch/arm/mach-stmp378x/include/mach/regs-lcdif.h

+/*
+ * stmp378x: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_RUN	0x00000001
+#define BP_LCDIF_CTRL_RUN	0
+#define BM_LCDIF_CTRL_LCDIF_MASTER	0x00000020
+#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC	0x00000080
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00000300
+#define BP_LCDIF_CTRL_WORD_LENGTH	8
+#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH	0x00000C00
+#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH	10
+#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE	0x0000C000
+#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE	14
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00010000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00020000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00040000
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00080000
+#define BM_LCDIF_CTRL_DVI_MODE	0x00100000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x03E00000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	21
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x04000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x08000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+#define BM_LCDIF_CTRL1_INTERLACE_FIELDS	0x00800000
+#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW	0x01000000
+
+#define HW_LCDIF_TRANSFER_COUNT	0x20
+#define BM_LCDIF_TRANSFER_COUNT_H_COUNT	0x0000FFFF
+#define BP_LCDIF_TRANSFER_COUNT_H_COUNT	0
+#define BM_LCDIF_TRANSFER_COUNT_V_COUNT	0xFFFF0000
+#define BP_LCDIF_TRANSFER_COUNT_V_COUNT	16
+
+#define HW_LCDIF_CUR_BUF	0x30
+
+#define HW_LCDIF_NEXT_BUF	0x40
+
+#define HW_LCDIF_TIMING		0x60
+
+#define HW_LCDIF_VDCTRL0	0x70
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0x0003FFFF
+#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x80
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0xFFFFFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+
+#define HW_LCDIF_VDCTRL2	0x90
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x0003FFFF
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF000000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	24
+
+#define HW_LCDIF_VDCTRL3	0xA0
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x0000FFFF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x0FFF0000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	16
+
+#define HW_LCDIF_VDCTRL4	0xB0
+#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0x0003FFFF
+#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON	0x00040000
+
+#define HW_LCDIF_DVICTRL0	0xC0
+#define BM_LCDIF_DVICTRL0_V_LINES_CNT	0x000003FF
+#define BP_LCDIF_DVICTRL0_V_LINES_CNT	0
+#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT	0x000FFC00
+#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT	10
+#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT	0x7FF00000
+#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT	20
+
+#define HW_LCDIF_DVICTRL1	0xD0
+#define BM_LCDIF_DVICTRL1_F2_START_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL1_F2_START_LINE	0
+#define BM_LCDIF_DVICTRL1_F1_END_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL1_F1_END_LINE	10
+#define BM_LCDIF_DVICTRL1_F1_START_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL1_F1_START_LINE	20
+
+#define HW_LCDIF_DVICTRL2	0xE0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE	10
+#define BM_LCDIF_DVICTRL2_F2_END_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL2_F2_END_LINE	20
+
+#define HW_LCDIF_DVICTRL3	0xF0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE	0x03FF0000
+#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE	16
+
+#define HW_LCDIF_DVICTRL4	0x100
+#define BM_LCDIF_DVICTRL4_H_FILL_CNT	0x000000FF
+#define BP_LCDIF_DVICTRL4_H_FILL_CNT	0
+#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE	0x0000FF00
+#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE	8
+#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE	0x00FF0000
+#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE	16
+#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE	0xFF000000
+#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE	24
+
+#define HW_LCDIF_CSC_COEFF0	0x110
+#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0x00000003
+#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0
+#define BM_LCDIF_CSC_COEFF0_C0	0x03FF0000
+#define BP_LCDIF_CSC_COEFF0_C0	16
+
+#define HW_LCDIF_CSC_COEFF1	0x120
+#define BM_LCDIF_CSC_COEFF1_C1	0x000003FF
+#define BP_LCDIF_CSC_COEFF1_C1	0
+#define BM_LCDIF_CSC_COEFF1_C2	0x03FF0000
+#define BP_LCDIF_CSC_COEFF1_C2	16
+
+#define HW_LCDIF_CSC_COEFF2	0x130
+#define BM_LCDIF_CSC_COEFF2_C3	0x000003FF
+#define BP_LCDIF_CSC_COEFF2_C3	0
+#define BM_LCDIF_CSC_COEFF2_C4	0x03FF0000
+#define BP_LCDIF_CSC_COEFF2_C4	16
+
+#define HW_LCDIF_CSC_COEFF3	0x140
+#define BM_LCDIF_CSC_COEFF3_C5	0x000003FF
+#define BP_LCDIF_CSC_COEFF3_C5	0
+#define BM_LCDIF_CSC_COEFF3_C6	0x03FF0000
+#define BP_LCDIF_CSC_COEFF3_C6	16
+
+#define HW_LCDIF_CSC_COEFF4	0x150
+#define BM_LCDIF_CSC_COEFF4_C7	0x000003FF
+#define BP_LCDIF_CSC_COEFF4_C7	0
+#define BM_LCDIF_CSC_COEFF4_C8	0x03FF0000
+#define BP_LCDIF_CSC_COEFF4_C8	16
+
+#define HW_LCDIF_CSC_OFFSET	0x160
+#define BM_LCDIF_CSC_OFFSET_Y_OFFSET	0x000001FF
+#define BP_LCDIF_CSC_OFFSET_Y_OFFSET	0
+#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET	0x01FF0000
+#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET	16
+
+#define HW_LCDIF_CSC_LIMIT	0x170
+#define BM_LCDIF_CSC_LIMIT_Y_MAX	0x000000FF
+#define BP_LCDIF_CSC_LIMIT_Y_MAX	0
+#define BM_LCDIF_CSC_LIMIT_Y_MIN	0x0000FF00
+#define BP_LCDIF_CSC_LIMIT_Y_MIN	8
+#define BM_LCDIF_CSC_LIMIT_CBCR_MAX	0x00FF0000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MAX	16
+#define BM_LCDIF_CSC_LIMIT_CBCR_MIN	0xFF000000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MIN	24
+
+#define HW_LCDIF_STAT		0x1D0
+#define BM_LCDIF_STAT_TXFIFO_EMPTY	0x04000000

arch/arm/mach-stmp378x/include/mach/regs-lradc.h

+/*
+ * stmp378x: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+#define REGS_LRADC_PHYS	0x80050000
+#define REGS_LRADC_SIZE	0x2000
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28

arch/arm/mach-stmp378x/include/mach/regs-ocotp.h

+/*
+ * stmp378x: OCOTP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_OCOTP_BASE	(STMP3XXX_REGS_BASE + 0x2C000)
+#define REGS_OCOTP_PHYS	0x8002C000
+#define REGS_OCOTP_SIZE	0x2000
+
+#define HW_OCOTP_CTRL		0x0
+#define BM_OCOTP_CTRL_BUSY	0x00000100
+#define BM_OCOTP_CTRL_ERROR	0x00000200
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	0x00001000
+#define BM_OCOTP_CTRL_RELOAD_SHADOWS	0x00002000
+#define BM_OCOTP_CTRL_WR_UNLOCK	0xFFFF0000
+#define BP_OCOTP_CTRL_WR_UNLOCK	16
+
+#define HW_OCOTP_DATA		0x10
+
+#define HW_OCOTP_CUST0		(0x20 + 0 * 0x10)
+#define HW_OCOTP_CUST1		(0x20 + 1 * 0x10)
+#define HW_OCOTP_CUST2		(0x20 + 2 * 0x10)
+#define HW_OCOTP_CUST3		(0x20 + 3 * 0x10)
+
+#define HW_OCOTP_CUSTn		0x20

arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h

+/*
+ * stmp378x: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+#define REGS_PINCTRL_PHYS	0x80018000
+#define REGS_PINCTRL_SIZE	0x2000
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x400
+#define HW_PINCTRL_PULL1	0x410
+#define HW_PINCTRL_PULL2	0x420
+#define HW_PINCTRL_PULL3	0x430
+
+#define HW_PINCTRL_DOUT0	0x500
+#define HW_PINCTRL_DOUT1	0x510
+#define HW_PINCTRL_DOUT2	0x520
+
+#define HW_PINCTRL_DIN0		0x600
+#define HW_PINCTRL_DIN1		0x610
+#define HW_PINCTRL_DIN2		0x620
+
+#define HW_PINCTRL_DOE0		0x700
+#define HW_PINCTRL_DOE1		0x710
+#define HW_PINCTRL_DOE2		0x720
+
+#define HW_PINCTRL_PIN2IRQ0	0x800
+#define HW_PINCTRL_PIN2IRQ1	0x810
+#define HW_PINCTRL_PIN2IRQ2	0x820
+
+#define HW_PINCTRL_IRQEN0	0x900
+#define HW_PINCTRL_IRQEN1	0x910
+#define HW_PINCTRL_IRQEN2	0x920
+
+#define HW_PINCTRL_IRQLEVEL0	0xA00
+#define HW_PINCTRL_IRQLEVEL1	0xA10
+#define HW_PINCTRL_IRQLEVEL2	0xA20
+
+#define HW_PINCTRL_IRQPOL0	0xB00
+#define HW_PINCTRL_IRQPOL1	0xB10
+#define HW_PINCTRL_IRQPOL2	0xB20
+
+#define HW_PINCTRL_IRQSTAT0	0xC00
+#define HW_PINCTRL_IRQSTAT1	0xC10
+#define HW_PINCTRL_IRQSTAT2	0xC20
+
+#endif

arch/arm/mach-stmp378x/include/mach/regs-power.h

+/*
+ * stmp378x: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+#define REGS_POWER_PHYS	0x80044000
+#define REGS_POWER_SIZE	0x2000
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0x00000001
+#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0
+#define BM_POWER_CTRL_ENIRQ_PSWITCH	0x00020000
+#define BM_POWER_CTRL_PSWITCH_IRQ	0x00100000
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT	0x00000040
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xC0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000200
+
+#define HW_POWER_RESET		0x100
+
+#define HW_POWER_DEBUG		0x110
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif

arch/arm/mach-stmp378x/include/mach/regs-pwm.h

+/*
+ * stmp378x: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+#define REGS_PWM_PHYS	0x80064000
+#define REGS_PWM_SIZE	0x2000
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20

arch/arm/mach-stmp378x/include/mach/regs-pxp.h

+/*
+ * stmp378x: PXP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PXP_BASE	(STMP3XXX_REGS_BASE + 0x2A000)
+#define REGS_PXP_PHYS	0x8002A000
+#define REGS_PXP_SIZE	0x2000
+
+#define HW_PXP_CTRL		0x0
+#define BM_PXP_CTRL_ENABLE	0x00000001
+#define BP_PXP_CTRL_ENABLE	0
+#define BM_PXP_CTRL_IRQ_ENABLE	0x00000002
+#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT	0x000000F0
+#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT	4
+#define BM_PXP_CTRL_ROTATE	0x00000300
+#define BP_PXP_CTRL_ROTATE	8
+#define BM_PXP_CTRL_HFLIP	0x00000400
+#define BM_PXP_CTRL_VFLIP	0x00000800
+#define BM_PXP_CTRL_S0_FORMAT	0x0000F000
+#define BP_PXP_CTRL_S0_FORMAT	12
+#define BM_PXP_CTRL_SCALE	0x00040000
+#define BM_PXP_CTRL_CROP	0x00080000
+
+#define HW_PXP_STAT		0x10
+#define BM_PXP_STAT_IRQ		0x00000001
+#define BP_PXP_STAT_IRQ		0
+
+#define HW_PXP_RGBBUF		0x20
+
+#define HW_PXP_RGBSIZE		0x40
+#define BM_PXP_RGBSIZE_HEIGHT	0x00000FFF
+#define BP_PXP_RGBSIZE_HEIGHT	0
+#define BM_PXP_RGBSIZE_WIDTH	0x00FFF000
+#define BP_PXP_RGBSIZE_WIDTH	12
+
+#define HW_PXP_S0BUF		0x50
+
+#define HW_PXP_S0UBUF		0x60
+
+#define HW_PXP_S0VBUF		0x70
+
+#define HW_PXP_S0PARAM		0x80
+#define BM_PXP_S0PARAM_HEIGHT	0x000000FF
+#define BP_PXP_S0PARAM_HEIGHT	0
+#define BM_PXP_S0PARAM_WIDTH	0x0000FF00
+#define BP_PXP_S0PARAM_WIDTH	8
+#define BM_PXP_S0PARAM_YBASE	0x00FF0000
+#define BP_PXP_S0PARAM_YBASE	16
+#define BM_PXP_S0PARAM_XBASE	0xFF000000
+#define BP_PXP_S0PARAM_XBASE	24
+
+#define HW_PXP_S0BACKGROUND	0x90
+
+#define HW_PXP_S0CROP		0xA0
+#define BM_PXP_S0CROP_HEIGHT	0x000000FF
+#define BP_PXP_S0CROP_HEIGHT	0
+#define BM_PXP_S0CROP_WIDTH	0x0000FF00
+#define BP_PXP_S0CROP_WIDTH	8
+#define BM_PXP_S0CROP_YBASE	0x00FF0000
+#define BP_PXP_S0CROP_YBASE	16
+#define BM_PXP_S0CROP_XBASE	0xFF000000
+#define BP_PXP_S0CROP_XBASE	24
+
+#define HW_PXP_S0SCALE		0xB0
+#define BM_PXP_S0SCALE_XSCALE	0x00003FFF
+#define BP_PXP_S0SCALE_XSCALE	0
+#define BM_PXP_S0SCALE_YSCALE	0x3FFF0000
+#define BP_PXP_S0SCALE_YSCALE	16
+
+#define HW_PXP_CSCCOEFF0	0xD0
+
+#define HW_PXP_CSCCOEFF1	0xE0
+
+#define HW_PXP_CSCCOEFF2	0xF0
+
+#define HW_PXP_S0COLORKEYLOW	0x180
+
+#define HW_PXP_S0COLORKEYHIGH	0x190
+
+#define HW_PXP_OL0		(0x200 + 0 * 0x40)
+#define HW_PXP_OL1		(0x200 + 1 * 0x40)
+#define HW_PXP_OL2		(0x200 + 2 * 0x40)
+#define HW_PXP_OL3		(0x200 + 3 * 0x40)
+#define HW_PXP_OL4		(0x200 + 4 * 0x40)
+#define HW_PXP_OL5		(0x200 + 5 * 0x40)
+#define HW_PXP_OL6		(0x200 + 6 * 0x40)
+#define HW_PXP_OL7		(0x200 + 7 * 0x40)
+
+#define HW_PXP_OLn		0x200
+
+#define HW_PXP_OL0SIZE		(0x210 + 0 * 0x40)
+#define HW_PXP_OL1SIZE		(0x210 + 1 * 0x40)
+#define HW_PXP_OL2SIZE		(0x210 + 2 * 0x40)
+#define HW_PXP_OL3SIZE		(0x210 + 3 * 0x40)
+#define HW_PXP_OL4SIZE		(0x210 + 4 * 0x40)
+#define HW_PXP_OL5SIZE		(0x210 + 5 * 0x40)
+#define HW_PXP_OL6SIZE		(0x210 + 6 * 0x40)
+#define HW_PXP_OL7SIZE		(0x210 + 7 * 0x40)
+
+#define HW_PXP_OLnSIZE		0x210
+#define BM_PXP_OLnSIZE_HEIGHT	0x000000FF
+#define BP_PXP_OLnSIZE_HEIGHT	0
+#define BM_PXP_OLnSIZE_WIDTH	0x0000FF00
+#define BP_PXP_OLnSIZE_WIDTH	8
+
+#define HW_PXP_OL0PARAM		(0x220 + 0 * 0x40)
+#define HW_PXP_OL1PARAM		(0x220 + 1 * 0x40)
+#define HW_PXP_OL2PARAM		(0x220 + 2 * 0x40)
+#define HW_PXP_OL3PARAM		(0x220 + 3 * 0x40)
+#define HW_PXP_OL4PARAM		(0x220 + 4 * 0x40)
+#define HW_PXP_OL5PARAM		(0x220 + 5 * 0x40)
+#define HW_PXP_OL6PARAM		(0x220 + 6 * 0x40)
+#define HW_PXP_OL7PARAM		(0x220 + 7 * 0x40)
+
+#define HW_PXP_OLnPARAM		0x220
+#define BM_PXP_OLnPARAM_ENABLE	0x00000001
+#define BP_PXP_OLnPARAM_ENABLE	0
+#define BM_PXP_OLnPARAM_ALPHA_CNTL	0x00000006
+#define BP_PXP_OLnPARAM_ALPHA_CNTL	1
+#define BM_PXP_OLnPARAM_ENABLE_COLORKEY	0x00000008
+#define BM_PXP_OLnPARAM_FORMAT	0x000000F0
+#define BP_PXP_OLnPARAM_FORMAT	4
+#define BM_PXP_OLnPARAM_ALPHA	0x0000FF00
+#define BP_PXP_OLnPARAM_ALPHA	8

arch/arm/mach-stmp378x/include/mach/regs-rtc.h

+/*
+ * stmp378x: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS	0x8005C000
+#define REGS_RTC_SIZE	0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+#define BM_RTC_PERSISTENT1_GENERAL	0xFFFFFFFF
+#define BP_RTC_PERSISTENT1_GENERAL	0
+
+#define HW_RTC_VERSION		0xD0

arch/arm/mach-stmp378x/include/mach/regs-saif.h

+/*
+ * stmp378x: SAIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SAIF_SIZE	0x2000

arch/arm/mach-stmp378x/include/mach/regs-spdif.h

+/*
+ * stmp378x: SPDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SPDIF_BASE	(STMP3XXX_REGS_BASE + 0x54000)
+#define REGS_SPDIF_PHYS	0x80054000
+#define REGS_SPDIF_SIZE	0x2000
+
+#define HW_SPDIF_CTRL		0x0
+#define BM_SPDIF_CTRL_RUN	0x00000001
+#define BP_SPDIF_CTRL_RUN	0
+#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_SPDIF_CTRL_WORD_LENGTH	0x00000010
+#define BM_SPDIF_CTRL_CLKGATE	0x40000000
+#define BM_SPDIF_CTRL_SFTRST	0x80000000
+
+#define HW_SPDIF_STAT		0x10
+
+#define HW_SPDIF_FRAMECTRL	0x20
+
+#define HW_SPDIF_SRR		0x30
+#define BM_SPDIF_SRR_RATE	0x000FFFFF
+#define BP_SPDIF_SRR_RATE	0
+#define BM_SPDIF_SRR_BASEMULT	0x70000000
+#define BP_SPDIF_SRR_BASEMULT	28
+
+#define HW_SPDIF_DEBUG		0x40
+
+#define HW_SPDIF_DATA		0x50
+
+#define HW_SPDIF_VERSION	0x60

arch/arm/mach-stmp378x/include/mach/regs-ssp.h

+/*
+ * stmp378x: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP1_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_BASE	(STMP3XXX_REGS_BASE + 0x34000)
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000

arch/arm/mach-stmp378x/include/mach/regs-sydma.h

+/*
+ * stmp378x: SYDMA register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SYDMA_BASE	(STMP3XXX_REGS_BASE + 0x26000)
+#define REGS_SYDMA_PHYS	0x80026000
+#define REGS_SYDMA_SIZE	0x2000

arch/arm/mach-stmp378x/include/mach/regs-timrot.h

+/*
+ * stmp378x: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+#define REGS_TIMROT_PHYS	0x80068000
+#define REGS_TIMROT_SIZE	0x2000
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_SELECT_A	0x00000007
+#define BP_TIMROT_ROTCTRL_SELECT_A	0
+#define BM_TIMROT_ROTCTRL_SELECT_B	0x00000070
+#define BP_TIMROT_ROTCTRL_SELECT_B	4
+#define BM_TIMROT_ROTCTRL_POLARITY_A	0x00000100
+#define BM_TIMROT_ROTCTRL_POLARITY_B	0x00000200
+#define BM_TIMROT_ROTCTRL_OVERSAMPLE	0x00000C00
+#define BP_TIMROT_ROTCTRL_OVERSAMPLE	10
+#define BM_TIMROT_ROTCTRL_RELATIVE	0x00001000
+#define BM_TIMROT_ROTCTRL_DIVIDER	0x003F0000
+#define BP_TIMROT_ROTCTRL_DIVIDER	16
+#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT	0x20000000
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_ROTCOUNT	0x10
+#define BM_TIMROT_ROTCOUNT_UPDOWN	0x0000FFFF
+#define BP_TIMROT_ROTCOUNT_UPDOWN	0
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+
+#endif

arch/arm/mach-stmp378x/include/mach/regs-tvenc.h

+/*
+ * stmp378x: TVENC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_TVENC_BASE	(STMP3XXX_REGS_BASE + 0x38000)
+#define REGS_TVENC_PHYS	0x80038000
+#define REGS_TVENC_SIZE	0x2000
+
+#define HW_TVENC_CTRL		0x0
+#define BM_TVENC_CTRL_CLKGATE	0x40000000
+#define BM_TVENC_CTRL_SFTRST	0x80000000
+
+#define HW_TVENC_CONFIG		0x10
+#define BM_TVENC_CONFIG_ENCD_MODE	0x00000007
+#define BP_TVENC_CONFIG_ENCD_MODE	0
+#define BM_TVENC_CONFIG_SYNC_MODE	0x00000070
+#define BP_TVENC_CONFIG_SYNC_MODE	4
+#define BM_TVENC_CONFIG_FSYNC_PHS	0x00000200
+#define BM_TVENC_CONFIG_CGAIN	0x0000C000
+#define BP_TVENC_CONFIG_CGAIN	14
+#define BM_TVENC_CONFIG_YGAIN_SEL	0x00030000
+#define BP_TVENC_CONFIG_YGAIN_SEL	16
+#define BM_TVENC_CONFIG_PAL_SHAPE	0x00100000
+
+#define HW_TVENC_SYNCOFFSET	0x30
+
+#define HW_TVENC_COLORSUB0	0xC0
+
+#define HW_TVENC_COLORBURST	0x140
+#define BM_TVENC_COLORBURST_PBA	0x00FF0000
+#define BP_TVENC_COLORBURST_PBA	16
+#define BM_TVENC_COLORBURST_NBA	0xFF000000
+#define BP_TVENC_COLORBURST_NBA	24
+
+#define HW_TVENC_MACROVISION0	0x150
+
+#define HW_TVENC_MACROVISION1	0x160
+
+#define HW_TVENC_MACROVISION2	0x170
+
+#define HW_TVENC_MACROVISION3	0x180
+
+#define HW_TVENC_MACROVISION4	0x190
+
+#define HW_TVENC_DACCTRL	0x1A0
+#define BM_TVENC_DACCTRL_RVAL	0x00000070
+#define BP_TVENC_DACCTRL_RVAL	4
+#define BM_TVENC_DACCTRL_DUMP_TOVDD1	0x00000100
+#define BM_TVENC_DACCTRL_PWRUP1	0x00001000
+#define BM_TVENC_DACCTRL_GAINUP	0x00040000
+#define BM_TVENC_DACCTRL_GAINDN	0x00080000

arch/arm/mach-stmp378x/include/mach/regs-uartapp.h

+/*
+ * stmp378x: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP1_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP2_BASE	(STMP3XXX_REGS_BASE + 0x6E000)
+#define REGS_UARTAPP2_PHYS	0x8006E000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90

arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h

+/*
+ * stmp378x: USBCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
+#define REGS_USBCTRL_SIZE	0x2000
+
+#define HW_USBCTRL_USBCMD	0x140
+#define BM_USBCTRL_USBCMD_RS	0x00000001
+#define BP_USBCTRL_USBCMD_RS	0
+#define BM_USBCTRL_USBCMD_RST	0x00000002
+
+#define HW_USBCTRL_USBINTR	0x148
+#define BM_USBCTRL_USBINTR_UE	0x00000001
+#define BP_USBCTRL_USBINTR_UE	0
+
+#define HW_USBCTRL_PORTSC1	0x184
+#define BM_USBCTRL_PORTSC1_PHCD	0x00800000
+
+#define HW_USBCTRL_OTGSC	0x1A4
+#define BM_USBCTRL_OTGSC_ID	0x00000100
+#define BM_USBCTRL_OTGSC_IDIS	0x00010000
+#define BM_USBCTRL_OTGSC_IDIE	0x01000000

arch/arm/mach-stmp378x/include/mach/regs-usbphy.h

+/*
+ * stmp378x: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+#define REGS_USBPHY_PHYS	0x8007C000
+#define REGS_USBPHY_SIZE	0x2000
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100

arch/arm/mach-stmp378x/stmp378x.h

+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP378X_H
+#define __MACH_STMP378X_H
+
+void stmp378x_map_io(void);
+void stmp378x_init_irq(void);
+
+extern struct platform_device stmp378x_pxp, stmp378x_i2c;
+#endif /* __MACH_STMP378X_COMMON_H */

arch/arm/mach-stmp37xx/Makefile

+obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
+obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o

arch/arm/mach-stmp37xx/Makefile.boot

+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000

arch/arm/plat-stmp3xxx/Makefile

+#
+# Makefile for the linux kernel.
+#
+# Object file lists.
+obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o