Commit 0696d608 authored by Huy Nguyen's avatar Huy Nguyen Committed by Saeed Mahameed

net/mlx5e: Receive buffer configuration

Add APIs for buffer configuration based on the changes in
pfc configuration, cable len, buffer size configuration,
and priority to buffer mapping.

Note that the xoff fomula is as below
  xoff = ((301+2.16 * len [m]) * speed [Gbps] + 2.72 MTU [B]
  xoff_threshold = buffer_size - xoff
  xon_threshold = xoff_threshold - MTU
Signed-off-by: default avatarHuy Nguyen <huyn@mellanox.com>
Reviewed-by: default avatarParav Pandit <parav@mellanox.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
parent 50b4a3c2
...@@ -21,7 +21,7 @@ mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o ...@@ -21,7 +21,7 @@ mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o en_rep.o en_tc.o mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o en_rep.o en_tc.o
mlx5_core-$(CONFIG_MLX5_CORE_EN_DCB) += en_dcbnl.o mlx5_core-$(CONFIG_MLX5_CORE_EN_DCB) += en_dcbnl.o en/port_buffer.o
mlx5_core-$(CONFIG_MLX5_CORE_IPOIB) += ipoib/ipoib.o ipoib/ethtool.o ipoib/ipoib_vlan.o mlx5_core-$(CONFIG_MLX5_CORE_IPOIB) += ipoib/ipoib.o ipoib/ethtool.o ipoib/ipoib_vlan.o
......
...@@ -65,6 +65,7 @@ struct page_pool; ...@@ -65,6 +65,7 @@ struct page_pool;
#define MLX5E_HW2SW_MTU(params, hwmtu) ((hwmtu) - ((params)->hard_mtu)) #define MLX5E_HW2SW_MTU(params, hwmtu) ((hwmtu) - ((params)->hard_mtu))
#define MLX5E_SW2HW_MTU(params, swmtu) ((swmtu) + ((params)->hard_mtu)) #define MLX5E_SW2HW_MTU(params, swmtu) ((swmtu) + ((params)->hard_mtu))
#define MLX5E_MAX_PRIORITY 8
#define MLX5E_MAX_DSCP 64 #define MLX5E_MAX_DSCP 64
#define MLX5E_MAX_NUM_TC 8 #define MLX5E_MAX_NUM_TC 8
...@@ -275,6 +276,10 @@ struct mlx5e_dcbx { ...@@ -275,6 +276,10 @@ struct mlx5e_dcbx {
/* The only setting that cannot be read from FW */ /* The only setting that cannot be read from FW */
u8 tc_tsa[IEEE_8021QAZ_MAX_TCS]; u8 tc_tsa[IEEE_8021QAZ_MAX_TCS];
u8 cap; u8 cap;
/* Buffer configuration */
u32 cable_len;
u32 xoff;
}; };
struct mlx5e_dcbx_dp { struct mlx5e_dcbx_dp {
......
/*
* Copyright (c) 2018, Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "port_buffer.h"
int mlx5e_port_query_buffer(struct mlx5e_priv *priv,
struct mlx5e_port_buffer *port_buffer)
{
struct mlx5_core_dev *mdev = priv->mdev;
int sz = MLX5_ST_SZ_BYTES(pbmc_reg);
u32 total_used = 0;
void *buffer;
void *out;
int err;
int i;
out = kzalloc(sz, GFP_KERNEL);
if (!out)
return -ENOMEM;
err = mlx5e_port_query_pbmc(mdev, out);
if (err)
goto out;
for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
buffer = MLX5_ADDR_OF(pbmc_reg, out, buffer[i]);
port_buffer->buffer[i].lossy =
MLX5_GET(bufferx_reg, buffer, lossy);
port_buffer->buffer[i].epsb =
MLX5_GET(bufferx_reg, buffer, epsb);
port_buffer->buffer[i].size =
MLX5_GET(bufferx_reg, buffer, size) << MLX5E_BUFFER_CELL_SHIFT;
port_buffer->buffer[i].xon =
MLX5_GET(bufferx_reg, buffer, xon_threshold) << MLX5E_BUFFER_CELL_SHIFT;
port_buffer->buffer[i].xoff =
MLX5_GET(bufferx_reg, buffer, xoff_threshold) << MLX5E_BUFFER_CELL_SHIFT;
total_used += port_buffer->buffer[i].size;
mlx5e_dbg(HW, priv, "buffer %d: size=%d, xon=%d, xoff=%d, epsb=%d, lossy=%d\n", i,
port_buffer->buffer[i].size,
port_buffer->buffer[i].xon,
port_buffer->buffer[i].xoff,
port_buffer->buffer[i].epsb,
port_buffer->buffer[i].lossy);
}
port_buffer->port_buffer_size =
MLX5_GET(pbmc_reg, out, port_buffer_size) << MLX5E_BUFFER_CELL_SHIFT;
port_buffer->spare_buffer_size =
port_buffer->port_buffer_size - total_used;
mlx5e_dbg(HW, priv, "total buffer size=%d, spare buffer size=%d\n",
port_buffer->port_buffer_size,
port_buffer->spare_buffer_size);
out:
kfree(out);
return err;
}
static int port_set_buffer(struct mlx5e_priv *priv,
struct mlx5e_port_buffer *port_buffer)
{
struct mlx5_core_dev *mdev = priv->mdev;
int sz = MLX5_ST_SZ_BYTES(pbmc_reg);
void *buffer;
void *in;
int err;
int i;
in = kzalloc(sz, GFP_KERNEL);
if (!in)
return -ENOMEM;
err = mlx5e_port_query_pbmc(mdev, in);
if (err)
goto out;
for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
buffer = MLX5_ADDR_OF(pbmc_reg, in, buffer[i]);
MLX5_SET(bufferx_reg, buffer, size,
port_buffer->buffer[i].size >> MLX5E_BUFFER_CELL_SHIFT);
MLX5_SET(bufferx_reg, buffer, lossy,
port_buffer->buffer[i].lossy);
MLX5_SET(bufferx_reg, buffer, xoff_threshold,
port_buffer->buffer[i].xoff >> MLX5E_BUFFER_CELL_SHIFT);
MLX5_SET(bufferx_reg, buffer, xon_threshold,
port_buffer->buffer[i].xon >> MLX5E_BUFFER_CELL_SHIFT);
}
err = mlx5e_port_set_pbmc(mdev, in);
out:
kfree(in);
return err;
}
/* xoff = ((301+2.16 * len [m]) * speed [Gbps] + 2.72 MTU [B]) */
static u32 calculate_xoff(struct mlx5e_priv *priv, unsigned int mtu)
{
u32 speed;
u32 xoff;
int err;
err = mlx5e_port_linkspeed(priv->mdev, &speed);
if (err)
return 0;
xoff = (301 + 216 * priv->dcbx.cable_len / 100) * speed / 1000 + 272 * mtu / 100;
mlx5e_dbg(HW, priv, "%s: xoff=%d\n", __func__, xoff);
return xoff;
}
static int update_xoff_threshold(struct mlx5e_port_buffer *port_buffer,
u32 xoff, unsigned int mtu)
{
int i;
for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
if (port_buffer->buffer[i].lossy) {
port_buffer->buffer[i].xoff = 0;
port_buffer->buffer[i].xon = 0;
continue;
}
if (port_buffer->buffer[i].size <
(xoff + mtu + (1 << MLX5E_BUFFER_CELL_SHIFT)))
return -ENOMEM;
port_buffer->buffer[i].xoff = port_buffer->buffer[i].size - xoff;
port_buffer->buffer[i].xon = port_buffer->buffer[i].xoff - mtu;
}
return 0;
}
/**
* update_buffer_lossy()
* mtu: device's MTU
* pfc_en: <input> current pfc configuration
* buffer: <input> current prio to buffer mapping
* xoff: <input> xoff value
* port_buffer: <output> port receive buffer configuration
* change: <output>
*
* Update buffer configuration based on pfc configuraiton and priority
* to buffer mapping.
* Buffer's lossy bit is changed to:
* lossless if there is at least one PFC enabled priority mapped to this buffer
* lossy if all priorities mapped to this buffer are PFC disabled
*
* Return:
* Return 0 if no error.
* Set change to true if buffer configuration is modified.
*/
static int update_buffer_lossy(unsigned int mtu,
u8 pfc_en, u8 *buffer, u32 xoff,
struct mlx5e_port_buffer *port_buffer,
bool *change)
{
bool changed = false;
u8 lossy_count;
u8 prio_count;
u8 lossy;
int prio;
int err;
int i;
for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
prio_count = 0;
lossy_count = 0;
for (prio = 0; prio < MLX5E_MAX_PRIORITY; prio++) {
if (buffer[prio] != i)
continue;
prio_count++;
lossy_count += !(pfc_en & (1 << prio));
}
if (lossy_count == prio_count)
lossy = 1;
else /* lossy_count < prio_count */
lossy = 0;
if (lossy != port_buffer->buffer[i].lossy) {
port_buffer->buffer[i].lossy = lossy;
changed = true;
}
}
if (changed) {
err = update_xoff_threshold(port_buffer, xoff, mtu);
if (err)
return err;
*change = true;
}
return 0;
}
int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
u32 change, unsigned int mtu,
struct ieee_pfc *pfc,
u32 *buffer_size,
u8 *prio2buffer)
{
struct mlx5e_port_buffer port_buffer;
u32 xoff = calculate_xoff(priv, mtu);
bool update_prio2buffer = false;
u8 buffer[MLX5E_MAX_PRIORITY];
bool update_buffer = false;
u32 total_used = 0;
u8 curr_pfc_en;
int err;
int i;
mlx5e_dbg(HW, priv, "%s: change=%x\n", __func__, change);
err = mlx5e_port_query_buffer(priv, &port_buffer);
if (err)
return err;
if (change & MLX5E_PORT_BUFFER_CABLE_LEN) {
update_buffer = true;
err = update_xoff_threshold(&port_buffer, xoff, mtu);
if (err)
return err;
}
if (change & MLX5E_PORT_BUFFER_PFC) {
err = mlx5e_port_query_priority2buffer(priv->mdev, buffer);
if (err)
return err;
err = update_buffer_lossy(mtu, pfc->pfc_en, buffer, xoff,
&port_buffer, &update_buffer);
if (err)
return err;
}
if (change & MLX5E_PORT_BUFFER_PRIO2BUFFER) {
update_prio2buffer = true;
err = mlx5_query_port_pfc(priv->mdev, &curr_pfc_en, NULL);
if (err)
return err;
err = update_buffer_lossy(mtu, curr_pfc_en, prio2buffer, xoff,
&port_buffer, &update_buffer);
if (err)
return err;
}
if (change & MLX5E_PORT_BUFFER_SIZE) {
for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
mlx5e_dbg(HW, priv, "%s: buffer[%d]=%d\n", __func__, i, buffer_size[i]);
if (!port_buffer.buffer[i].lossy && !buffer_size[i]) {
mlx5e_dbg(HW, priv, "%s: lossless buffer[%d] size cannot be zero\n",
__func__, i);
return -EINVAL;
}
port_buffer.buffer[i].size = buffer_size[i];
total_used += buffer_size[i];
}
mlx5e_dbg(HW, priv, "%s: total buffer requested=%d\n", __func__, total_used);
if (total_used > port_buffer.port_buffer_size)
return -EINVAL;
update_buffer = true;
err = update_xoff_threshold(&port_buffer, xoff, mtu);
if (err)
return err;
}
/* Need to update buffer configuration if xoff value is changed */
if (!update_buffer && xoff != priv->dcbx.xoff) {
update_buffer = true;
err = update_xoff_threshold(&port_buffer, xoff, mtu);
if (err)
return err;
}
priv->dcbx.xoff = xoff;
/* Apply the settings */
if (update_buffer) {
err = port_set_buffer(priv, &port_buffer);
if (err)
return err;
}
if (update_prio2buffer)
err = mlx5e_port_set_priority2buffer(priv->mdev, prio2buffer);
return err;
}
/*
* Copyright (c) 2018, Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef __MLX5_EN_PORT_BUFFER_H__
#define __MLX5_EN_PORT_BUFFER_H__
#include "en.h"
#include "port.h"
#define MLX5E_MAX_BUFFER 8
#define MLX5E_BUFFER_CELL_SHIFT 7
#define MLX5E_DEFAULT_CABLE_LEN 7 /* 7 meters */
#define MLX5_BUFFER_SUPPORTED(mdev) (MLX5_CAP_GEN(mdev, pcam_reg) && \
MLX5_CAP_PCAM_REG(mdev, pbmc) && \
MLX5_CAP_PCAM_REG(mdev, pptb))
enum {
MLX5E_PORT_BUFFER_CABLE_LEN = BIT(0),
MLX5E_PORT_BUFFER_PFC = BIT(1),
MLX5E_PORT_BUFFER_PRIO2BUFFER = BIT(2),
MLX5E_PORT_BUFFER_SIZE = BIT(3),
};
struct mlx5e_bufferx_reg {
u8 lossy;
u8 epsb;
u32 size;
u32 xoff;
u32 xon;
};
struct mlx5e_port_buffer {
u32 port_buffer_size;
u32 spare_buffer_size;
struct mlx5e_bufferx_reg buffer[MLX5E_MAX_BUFFER];
};
int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
u32 change, unsigned int mtu,
struct ieee_pfc *pfc,
u32 *buffer_size,
u8 *prio2buffer);
int mlx5e_port_query_buffer(struct mlx5e_priv *priv,
struct mlx5e_port_buffer *port_buffer);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment