Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (180 commits)
  leo: disable cursor when leaving graphics mode
  cg6: disable cursor when leaving graphics mode
  sparc32: sun4m interrupt mask cleanup
  drivers/rtc/Kconfig: don't build rtc-cmos.o on sparc32
  sparc: arch/sparc/kernel/pmc.c -- extra #include?
  sparc32: Add more extensive documentation of sun4m interrupts.
  sparc32: Kill irq_rcvreg from sun4m_irq.c
  sparc32: Delete master_l10_limit.
  sparc32: Use PROM device probing for sun4c timers.
  sparc32: Use PROM device probing for sun4c interrupt register.
  sparc32: Delete claim_ticker14().
  sparc32: Stop calling claim_ticker14() from sun4c_irq.c
  sparc32: Kill clear_profile_irq btfixup entry.
  sparc32: Call sun4m_clear_profile_irq() directly from sun4m_smp.c
  sparc32: Remove #if 0'd code from sun4c_irq.c
  sparc32: Remove some SMP ifdefs in sun4d_irq.c
  sparc32: Use PROM infrastructure for probing and mapping sun4d timers.
  sparc32: Use PROM device probing for sun4m irq registers.
  sparc32: Use PROM device probing for sun4m timer registers.
  sparc: Fix user_regset 'n' field values.
  ...

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -5073,8 +5073,7 @@ struct _snd_pcm_runtime {
       with <constant>SNDRV_DMA_TYPE_CONTINUOUS</constant> type and the
       <function>snd_dma_continuous_data(GFP_KERNEL)</function> device pointer,
       where <constant>GFP_KERNEL</constant> is the kernel allocation flag to
-      use.  For the SBUS, <constant>SNDRV_DMA_TYPE_SBUS</constant> and
-      <function>snd_dma_sbus_data(sbus_dev)</function> are used instead.
+      use.
       For the PCI scatter-gather buffers, use
       <constant>SNDRV_DMA_TYPE_DEV_SG</constant> with
       <function>snd_dma_pci_data(pci)</function>

arch/sparc/Kconfig

@@ -20,6 +20,11 @@ config GENERIC_ISA_DMA
 	bool
 	default y
 
+config GENERIC_GPIO
+	bool
+	help
+	  Generic GPIO API support
+
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
@@ -69,6 +74,9 @@ config SPARC
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP
 	select HAVE_ARCH_TRACEHOOK
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select RTC_CLASS
+	select RTC_DRV_M48T59
 
 # Identify this as a Sparc32 build
 config SPARC32
@@ -204,17 +212,6 @@ config SUN_PM
 	  Enable power management and CPU standby features on supported
 	  SPARC platforms.
 
-config SUN4
-	bool "Support for SUN4 machines (disables SUN4[CDM] support)"
-	depends on !SMP
-	default n
-	help
-	  Say Y here if, and only if, your machine is a sun4. Note that
-	  a kernel compiled with this option will run only on sun4.
-	  (And the current version will probably work only on sun4/330.)
-
-if !SUN4
-
 config PCI
 	bool "Support for PCI and PS/2 keyboard/mouse"
 	help
@@ -227,11 +224,6 @@ config PCI_SYSCALL
 
 source "drivers/pci/Kconfig"
 
-endif
-
-config NO_DMA
-	def_bool !PCI
-
 config SUN_OPENPROMFS
 	tristate "Openprom tree appears in /proc/openprom"
 	help
@@ -263,9 +255,7 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
-if !SUN4
 source "drivers/sbus/char/Kconfig"
-endif
 
 # This one must be before the filesystem configs. -DaveM
 

arch/sparc/include/asm/Kbuild

@@ -22,7 +22,6 @@ header-y += unistd_64.h
 
 header-y += apc.h
 header-y += asi.h
-header-y += bpp.h
 header-y += display7seg.h
 header-y += envctrl.h
 header-y += fbio.h
@@ -41,5 +40,4 @@ header-y += reg_64.h
 header-y += traps.h
 header-y += uctx.h
 header-y += utrap.h
-header-y += vfc_ioctls.h
 header-y += watchdog.h

arch/sparc/include/asm/asmmacro.h

@@ -34,12 +34,7 @@
 /* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
    likes byte accesses. These are to avoid ifdef mania. */
 
-#ifdef CONFIG_SUN4
-#define lduXa	lduha
-#define stXa	stha
-#else
 #define lduXa	lduba
 #define stXa	stba
-#endif
 
 #endif /* !(_SPARC_ASMMACRO_H) */

arch/sparc/include/asm/bpp.h

-#ifndef _SPARC_BPP_H
-#define _SPARC_BPP_H
-
-/*
- * Copyright (c) 1995 Picture Elements
- *	Stephen Williams
- *	Gus Baldauf
- *
- * Linux/SPARC port by Peter Zaitcev.
- * Integration into SPARC tree by Tom Dyas.
- */
-
-#include  <linux/ioctl.h>
-
-/*
- * This is a driver that supports IEEE Std 1284-1994 communications
- * with compliant or compatible devices. It will use whatever features
- * the device supports, prefering those that are typically faster.
- *
- * When the device is opened, it is left in COMPATIBILITY mode, and
- * writes work like any printer device. The driver only attempt to
- * negotiate 1284 modes when needed so that plugs can be pulled,
- * switch boxes switched, etc., without disrupting things. It will
- * also leave the device in compatibility mode when closed.
- */
-
-
-
-/*
- * This driver also supplies ioctls to manually manipulate the
- * pins. This is great for testing devices, or writing code to deal
- * with bizzarro-mode of the ACME Special TurboThingy Plus.
- *
- * NOTE: These ioctl currently do not interact well with
- * read/write. Caveat emptor.
- *
- * PUT_PINS allows us to assign the sense of all the pins, including
- * the data pins if being driven by the host. The GET_PINS returns the
- * pins that the peripheral drives, including data if appropriate.
- */
-
-# define BPP_PUT_PINS _IOW('B', 1, int)
-# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
-# define BPP_PUT_DATA _IOW('B', 3, int)
-# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
-
-/*
- * Set the data bus to input mode. Disengage the data bin driver and
- * be prepared to read values from the peripheral. If the arg is 0,
- * then revert the bus to output mode.
- */
-# define BPP_SET_INPUT _IOW('B', 5, int)
-
-/*
- * These bits apply to the PUT operation...
- */
-# define BPP_PP_nStrobe   0x0001
-# define BPP_PP_nAutoFd   0x0002
-# define BPP_PP_nInit     0x0004
-# define BPP_PP_nSelectIn 0x0008
-
-/*
- * These apply to the GET operation, which also reads the current value
- * of the previously put values. A bit mask of these will be returned
- * as a bit mask in the return code of the ioctl().
- */
-# define BPP_GP_nAck   0x0100
-# define BPP_GP_Busy   0x0200
-# define BPP_GP_PError 0x0400
-# define BPP_GP_Select 0x0800
-# define BPP_GP_nFault 0x1000
-
-#endif

arch/sparc/include/asm/bugs.h

@@ -7,10 +7,6 @@
 #include <asm/cpudata.h>
 #endif
 
-#ifdef CONFIG_SPARC64
-#include <asm/sstate.h>
-#endif
-
 extern unsigned long loops_per_jiffy;
 
 static void __init check_bugs(void)
@@ -18,7 +14,4 @@ static void __init check_bugs(void)
 #if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
 	cpu_data(0).udelay_val = loops_per_jiffy;
 #endif
-#ifdef CONFIG_SPARC64
-	sstate_running();
-#endif
 }

arch/sparc/include/asm/cpudata_64.h

@@ -86,7 +86,6 @@ extern struct trap_per_cpu trap_block[NR_CPUS];
 extern void init_cur_cpu_trap(struct thread_info *);
 extern void setup_tba(void);
 extern int ncpus_probed;
-extern void __init cpu_probe(void);
 extern const struct seq_operations cpuinfo_op;
 
 extern unsigned long real_hard_smp_processor_id(void);

arch/sparc/include/asm/dma-mapping_32.h

 #ifndef _ASM_SPARC_DMA_MAPPING_H
 #define _ASM_SPARC_DMA_MAPPING_H
 
+#include <linux/types.h>
 
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif /* PCI */
+struct device;
+struct scatterlist;
+struct page;
+
+#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+extern void dma_free_coherent(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t dma_handle);
+extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+				 size_t size,
+				 enum dma_data_direction direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+			     size_t size,
+			     enum dma_data_direction direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			       unsigned long offset, size_t size,
+			       enum dma_data_direction direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+			   size_t size, enum dma_data_direction direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg,
+		      int nents, enum dma_data_direction direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+			 int nents, enum dma_data_direction direction);
+extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				    size_t size,
+				    enum dma_data_direction direction);
+extern void dma_sync_single_for_device(struct device *dev,
+				       dma_addr_t dma_handle,
+				       size_t size,
+				       enum dma_data_direction direction);
+extern void dma_sync_single_range_for_cpu(struct device *dev,
+					  dma_addr_t dma_handle,
+					  unsigned long offset,
+					  size_t size,
+					  enum dma_data_direction direction);
+extern void dma_sync_single_range_for_device(struct device *dev,
+					     dma_addr_t dma_handle,
+					     unsigned long offset, size_t size,
+					     enum dma_data_direction direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+				int nelems, enum dma_data_direction direction);
+extern void dma_sync_sg_for_device(struct device *dev,
+				   struct scatterlist *sg, int nelems,
+				   enum dma_data_direction direction);
+extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+extern int dma_get_cache_alignment(void);
+
+#define dma_alloc_noncoherent	dma_alloc_coherent
+#define dma_free_noncoherent	dma_free_coherent
 
 #endif /* _ASM_SPARC_DMA_MAPPING_H */

arch/sparc/include/asm/dma.h

-#ifndef ___ASM_SPARC_DMA_H
-#define ___ASM_SPARC_DMA_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/dma_64.h>
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
 #else
-#include <asm/dma_32.h>
+#define isa_dma_bridge_buggy 	(0)
 #endif
+
+#ifdef CONFIG_SPARC32
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+struct page;
+struct device;
+struct scatterlist;
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, struct device *, char *, unsigned long)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct device *, struct scatterlist *, int)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, struct device *, __u32, unsigned long)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct device *, struct scatterlist *, int)
+
+#define mmu_get_scsi_one(dev,vaddr,len) BTFIXUP_CALL(mmu_get_scsi_one)(dev,vaddr,len)
+#define mmu_get_scsi_sgl(dev,sg,sz) BTFIXUP_CALL(mmu_get_scsi_sgl)(dev,sg,sz)
+#define mmu_release_scsi_one(dev,vaddr,len) BTFIXUP_CALL(mmu_release_scsi_one)(dev,vaddr,len)
+#define mmu_release_scsi_sgl(dev,sg,sz) BTFIXUP_CALL(mmu_release_scsi_sgl)(dev,sg,sz)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int, mmu_map_dma_area, struct device *, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, struct device *, unsigned long busa, int len)
+
+#define mmu_map_dma_area(dev,pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(dev,pba,va,a,len)
+#define mmu_unmap_dma_area(dev,ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(dev,ba,len)
 #endif
+
+#endif /* !(_ASM_SPARC_DMA_H) */

arch/sparc/include/asm/dma_64.h

-/*
- * include/asm/dma.h
- *
- * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _ASM_SPARC64_DMA_H
-#define _ASM_SPARC64_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define DMA_MODE_READ    1
-#define DMA_MODE_WRITE   2
-#define MAX_DMA_ADDRESS  (~0UL)
-
-/* Useful constants */
-#define SIZE_16MB      (16*1024*1024)
-#define SIZE_64K       (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
-#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
-#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
-#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
-
-/* DVMA chip revisions */
-enum dvma_rev {
-	dvmarev0,
-	dvmaesc1,
-	dvmarev1,
-	dvmarev2,
-	dvmarev3,
-	dvmarevplus,
-	dvmahme
-};
-
-#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
-	struct sbus_dma *next;
-	struct sbus_dev *sdev;
-	void __iomem *regs;
-
-	/* Status, misc info */
-	int node;                /* Prom node for this DMA device */
-	int running;             /* Are we doing DMA now? */
-	int allocated;           /* Are we "owned" by anyone yet? */
-
-	/* Transfer information. */
-	u32 addr;                /* Start address of current transfer */
-	int nbytes;              /* Size of current transfer */
-	int realbytes;           /* For splitting up large transfers, etc. */
-
-	/* DMA revision */
-	enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
-#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
-#define DMA_VERS0        0x00000000        /* Sunray DMA version */
-#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
-#define DMA_VERS1        0x80000000        /* DMA rev 1 */
-#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
-#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
-#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
-#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
-#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
-#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
-#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
-#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
-#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
-#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
-#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
-#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
-#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
-#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
-#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
-#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1       0x01
-#define DMA_BURST2       0x02
-#define DMA_BURST4       0x04
-#define DMA_BURST8       0x08
-#define DMA_BURST16      0x10
-#define DMA_BURST32      0x20
-#define DMA_BURST64      0x40
-#define DMA_BURSTBITS    0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
-#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
-#define DMA_OFF(__regs)		\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp &= ~DMA_ENABLE; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSOFF(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp &= ~DMA_INT_ENAB; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSON(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= DMA_INT_ENAB; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_PUNTFIFO(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= DMA_FIFO_INV; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_SETSTART(__regs, __addr)	\
-	sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
-#define DMA_BEGINDMA_W(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_BEGINDMA_R(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
-	tmp &= ~DMA_ST_WRITE; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done.  So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler.  You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
-   } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
-	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
-   } while(0)
-
-#define for_each_dvma(dma) \
-        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-#endif /* !(_ASM_SPARC64_DMA_H) */

arch/sparc/include/asm/ebus.h

-#ifndef ___ASM_SPARC_EBUS_H
-#define ___ASM_SPARC_EBUS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/ebus_64.h>
-#else
-#include <asm/ebus_32.h>
-#endif
-#endif

arch/sparc/include/asm/ebus_32.h

-/*
- * ebus.h: PCI to Ebus pseudo driver software state.
- *
- * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
- *
- * Adopted for sparc by V. Roganov and G. Raiko.
- */
-
-#ifndef __SPARC_EBUS_H
-#define __SPARC_EBUS_H
-
-#ifndef _LINUX_IOPORT_H
-#include <linux/ioport.h>
-#endif
-#include <linux/of_device.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-
-struct linux_ebus_child {
-	struct linux_ebus_child		*next;
-	struct linux_ebus_device	*parent;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-
-struct linux_ebus_device {
-	struct of_device		ofdev;
-	struct linux_ebus_device	*next;
-	struct linux_ebus_child		*children;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
-
-struct linux_ebus {
-	struct of_device		ofdev;
-	struct linux_ebus		*next;
-	struct linux_ebus_device	*devices;
-	struct linux_pbm_info		*parent;
-	struct pci_dev			*self;
-	struct device_node		*prom_node;
-};
-#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
-
-struct linux_ebus_dma {
-	unsigned int dcsr;
-	unsigned int dacr;
-	unsigned int dbcr;
-};
-
-#define EBUS_DCSR_INT_PEND	0x00000001
-#define EBUS_DCSR_ERR_PEND	0x00000002
-#define EBUS_DCSR_DRAIN		0x00000004
-#define EBUS_DCSR_INT_EN	0x00000010
-#define EBUS_DCSR_RESET		0x00000080
-#define EBUS_DCSR_WRITE		0x00000100
-#define EBUS_DCSR_EN_DMA	0x00000200
-#define EBUS_DCSR_CYC_PEND	0x00000400
-#define EBUS_DCSR_DIAG_RD_DONE	0x00000800
-#define EBUS_DCSR_DIAG_WR_DONE	0x00001000
-#define EBUS_DCSR_EN_CNT	0x00002000
-#define EBUS_DCSR_TC		0x00004000
-#define EBUS_DCSR_DIS_CSR_DRN	0x00010000
-#define EBUS_DCSR_BURST_SZ_MASK	0x000c0000
-#define EBUS_DCSR_BURST_SZ_1	0x00080000
-#define EBUS_DCSR_BURST_SZ_4	0x00000000
-#define EBUS_DCSR_BURST_SZ_8	0x00040000
-#define EBUS_DCSR_BURST_SZ_16	0x000c0000
-#define EBUS_DCSR_DIAG_EN	0x00100000
-#define EBUS_DCSR_DIS_ERR_PEND	0x00400000
-#define EBUS_DCSR_TCI_DIS	0x00800000
-#define EBUS_DCSR_EN_NEXT	0x01000000
-#define EBUS_DCSR_DMA_ON	0x02000000
-#define EBUS_DCSR_A_LOADED	0x04000000
-#define EBUS_DCSR_NA_LOADED	0x08000000
-#define EBUS_DCSR_DEV_ID_MASK	0xf0000000
-
-extern struct linux_ebus		*ebus_chain;
-
-extern void ebus_init(void);
-
-#define for_each_ebus(bus)						\
-        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
-
-#define for_each_ebusdev(dev, bus)					\
-        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
-
-#define for_each_edevchild(dev, child)					\
-        for((child) = (dev)->children; (child); (child) = (child)->next)
-
-#endif /* !(__SPARC_EBUS_H) */

arch/sparc/include/asm/ebus_64.h → arch/sparc/include/asm/ebus_dma.h

-/*
- * ebus.h: PCI to Ebus pseudo driver software state.
- *
- * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
- * Copyright (C) 1999 David S. Miller (davem@redhat.com)
- */
-
-#ifndef __SPARC64_EBUS_H
-#define __SPARC64_EBUS_H
-
-#include <linux/of_device.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-
-struct linux_ebus_child {
-	struct linux_ebus_child		*next;
-	struct linux_ebus_device	*parent;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-
-struct linux_ebus_device {
-	struct of_device		ofdev;
-	struct linux_ebus_device	*next;
-	struct linux_ebus_child		*children;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
-
-struct linux_ebus {
-	struct of_device		ofdev;
-	struct linux_ebus		*next;
-	struct linux_ebus_device	*devices;
-	struct pci_dev			*self;
-	int				 index;
-	int				 is_rio;
-	struct device_node		*prom_node;
-};
-#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+#ifndef __ASM_SPARC_EBUS_DMA_H
+#define __ASM_SPARC_EBUS_DMA_H
 
 struct ebus_dma_info {
 	spinlock_t	lock;
@@ -79,17 +32,4 @@ extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
 extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
 extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
 
-extern struct linux_ebus		*ebus_chain;
-
-extern void ebus_init(void);
-
-#define for_each_ebus(bus)						\
-        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
-
-#define for_each_ebusdev(dev, bus)					\
-        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
-
-#define for_each_edevchild(dev, child)					\
-        for((child) = (dev)->children; (child); (child) = (child)->next)
-
-#endif /* !(__SPARC64_EBUS_H) */
+#endif /* __ASM_SPARC_EBUS_DMA_H */

arch/sparc/include/asm/elf_32.h

@@ -105,11 +105,8 @@ typedef struct {
 #define ELF_DATA	ELFDATA2MSB
 
 #define USE_ELF_CORE_DUMP
-#ifndef CONFIG_SUN4
+
 #define ELF_EXEC_PAGESIZE	4096
-#else
-#define ELF_EXEC_PAGESIZE	8192
-#endif
 
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
@@ -126,7 +123,7 @@ typedef struct {
 /* Sun4c has none of the capabilities, most sun4m's have them all.
  * XXX This is gross, set some global variable at boot time. -DaveM
  */
-#define ELF_HWCAP	((ARCH_SUN4C_SUN4) ? 0 : \
+#define ELF_HWCAP	((ARCH_SUN4C) ? 0 : \
 			 (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
 			  HWCAP_SPARC_SWAP | \
 			  ((srmmu_modtype != Cypress && \

arch/sparc/include/asm/fhc.h

-/*
- * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
+/* fhc.h: FHC and Clock board register definitions.
  *
  * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
  */
@@ -7,14 +6,6 @@
 #ifndef _SPARC64_FHC_H
 #define _SPARC64_FHC_H
 
-#include <linux/timer.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/upa.h>
-
-struct linux_fhc;
-
 /* Clock board register offsets. */
 #define CLOCK_CTRL	0x00UL	/* Main control */
 #define CLOCK_STAT1	0x10UL	/* Status one */
@@ -29,21 +20,7 @@ struct linux_fhc;
 #define CLOCK_CTRL_MLED		0x02	/* Mid LED, 1 == on */
 #define CLOCK_CTRL_RLED		0x01	/* RIght LED, 1 == on */
 
-struct linux_central {
-	struct linux_fhc		*child;
-	unsigned long			cfreg;
-	unsigned long			clkregs;
-	unsigned long			clkver;
-	int				slots;
-	struct device_node		*prom_node;
-
-	struct linux_prom_ranges	central_ranges[PROMREG_MAX];
-	int				num_central_ranges;
-};
-
 /* Firehose controller register offsets */
-struct fhc_regs {
-	unsigned long			pregs;	/* FHC internal regs */
 #define FHC_PREGS_ID	0x00UL	/* FHC ID */
 #define  FHC_ID_VERS		0xf0000000 /* Version of this FHC		*/
 #define  FHC_ID_PARTID		0x0ffff000 /* Part ID code (0x0f9f == FHC)	*/
@@ -90,32 +67,14 @@ struct fhc_regs {
 #define  FHC_JTAG_CTRL_MENAB	0x80000000 /* Indicates this is JTAG Master	 */
 #define  FHC_JTAG_CTRL_MNONE	0x40000000 /* Indicates no JTAG Master present	 */
 #define FHC_PREGS_JCMD	0x100UL	/* FHC JTAG Command Register */
-	unsigned long			ireg;	/* FHC IGN reg */
 #define FHC_IREG_IGN	0x00UL	/* This FHC's IGN */
-	unsigned long			ffregs;	/* FHC fanfail regs */
 #define FHC_FFREGS_IMAP	0x00UL	/* FHC Fanfail IMAP */
 #define FHC_FFREGS_ICLR	0x10UL	/* FHC Fanfail ICLR */
-	unsigned long			sregs;	/* FHC system regs */
 #define FHC_SREGS_IMAP	0x00UL	/* FHC System IMAP */
 #define FHC_SREGS_ICLR	0x10UL	/* FHC System ICLR */
-	unsigned long			uregs;	/* FHC uart regs */
 #define FHC_UREGS_IMAP	0x00UL	/* FHC Uart IMAP */
 #define FHC_UREGS_ICLR	0x10UL	/* FHC Uart ICLR */
-	unsigned long			tregs;	/* FHC TOD regs */
 #define FHC_TREGS_IMAP	0x00UL	/* FHC TOD IMAP */
 #define FHC_TREGS_ICLR	0x10UL	/* FHC TOD ICLR */
-};
-
-struct linux_fhc {
-	struct linux_fhc		*next;
-	struct linux_central		*parent;	/* NULL if not central FHC */
-	struct fhc_regs			fhc_regs;
-	int				board;
-	int				jtag_master;
-	struct device_node		*prom_node;
-
-	struct linux_prom_ranges	fhc_ranges[PROMREG_MAX];
-	int				num_fhc_ranges;
-};
 
 #endif /* !(_SPARC64_FHC_H) */

arch/sparc/include/asm/floppy_32.h

@@ -6,6 +6,9 @@
 #ifndef __ASM_SPARC_FLOPPY_H
 #define __ASM_SPARC_FLOPPY_H
 
+#include <linux/of.h>
+#include <linux/of_device.h>
+
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -343,7 +346,7 @@ static int sun_floppy_init(void)
 	r.flags = fd_regs[0].which_io;
 	r.start = fd_regs[0].phys_addr;
 	sun_fdc = (struct sun_flpy_controller *)
-	    sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+	    of_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
 
 	/* Last minute sanity check... */
 	if(sun_fdc->status_82072 == 0xff) {
@@ -385,4 +388,15 @@ static int sparc_eject(void)
 
 #define EXTRA_FLOPPY_PARAMS
 
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
 #endif /* !(__ASM_SPARC_FLOPPY_H) */

arch/sparc/include/asm/floppy_64.h

 /* floppy.h: Sparc specific parts of the Floppy driver.
  *
- * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996, 2007, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  *
  * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be)
@@ -9,18 +9,11 @@
 #ifndef __ASM_SPARC64_FLOPPY_H
 #define __ASM_SPARC64_FLOPPY_H
 
-#include <linux/init.h>
-#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/dma-mapping.h>
 
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/idprom.h>
-#include <asm/oplib.h>
 #include <asm/auxio.h>
-#include <asm/sbus.h>
-#include <asm/irq.h>
-
 
 /*
  * Define this to enable exchanging drive 0 and 1 if only drive 1 is
@@ -50,7 +43,7 @@ struct sun_flpy_controller {
 /* You'll only ever find one controller on an Ultra anyways. */
 static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
 unsigned long fdc_status;
-static struct sbus_dev *floppy_sdev = NULL;
+static struct of_device *floppy_op = NULL;
 
 struct sun_floppy_ops {
 	unsigned char	(*fd_inb) (unsigned long port);
@@ -291,12 +284,11 @@ static int sun_fd_eject(int drive)
 	return 0;
 }
 
-#ifdef CONFIG_PCI
-#include <asm/ebus.h>
+#include <asm/ebus_dma.h>
 #include <asm/ns87303.h>
 
 static struct ebus_dma_info sun_pci_fd_ebus_dma;
-static struct pci_dev *sun_pci_ebus_dev;
+static struct device *sun_floppy_dev;
 static int sun_pci_broken_drive = -1;
 
 struct sun_pci_dma_op {
@@ -377,7 +369,7 @@ static void sun_pci_fd_enable_dma(void)
 	sun_pci_dma_pending.addr = -1U;
 
 	sun_pci_dma_current.addr =
-		pci_map_single(sun_pci_ebus_dev,
+		dma_map_single(sun_floppy_dev,
 			       sun_pci_dma_current.buf,
 			       sun_pci_dma_current.len,
 			       sun_pci_dma_current.direction);
@@ -394,7 +386,7 @@ static void sun_pci_fd_disable_dma(void)
 {
 	ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
 	if (sun_pci_dma_current.addr != -1U)
-		pci_unmap_single(sun_pci_ebus_dev,
+		dma_unmap_single(sun_floppy_dev,
 				 sun_pci_dma_current.addr,
 				 sun_pci_dma_current.len,
 				 sun_pci_dma_current.direction);
@@ -404,9 +396,9 @@ static void sun_pci_fd_disable_dma(void)
 static void sun_pci_fd_set_dma_mode(int mode)
 {
 	if (mode == DMA_MODE_WRITE)
-		sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
+		sun_pci_dma_pending.direction = DMA_TO_DEVICE;
 	else
-		sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
+		sun_pci_dma_pending.direction = DMA_FROM_DEVICE;
 
 	ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
 }
@@ -538,80 +530,84 @@ static int sun_pci_fd_test_drive(unsigned long port, int drive)
 #undef MSR
 #undef DOR
 
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_PCI
-static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
+static int __init ebus_fdthree_p(struct device_node *dp)
 {
-	if (!strcmp(edev->prom_node->name, "fdthree"))
+	if (!strcmp(dp->name, "fdthree"))
 		return 1;
-	if (!strcmp(edev->prom_node->name, "floppy")) {
+	if (!strcmp(dp->name, "floppy")) {
 		const char *compat;
 
-		compat = of_get_property(edev->prom_node,
-					 "compatible", NULL);
+		compat = of_get_property(dp, "compatible", NULL);
 		if (compat && !strcmp(compat, "fdthree"))
 			return 1;
 	}
 	return 0;
 }
-#endif
 
 static unsigned long __init sun_floppy_init(void)
 {
-	char state[128];
-	struct sbus_bus *bus;
-	struct sbus_dev *sdev = NULL;
 	static int initialized = 0;
+	struct device_node *dp;
+	struct of_device *op;
+	const char *prop;
+	char state[128];
 
 	if (initialized)
 		return sun_floppy_types[0];
 	initialized = 1;
 
-	for_all_sbusdev (sdev, bus) {
-		if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))
+	op = NULL;
+
+	for_each_node_by_name(dp, "SUNW,fdtwo") {
+		if (strcmp(dp->parent->name, "sbus"))
+			continue;
+		op = of_find_device_by_node(dp);
+		if (op)
 			break;
 	}
-	if(sdev) {
-		floppy_sdev = sdev;
-		FLOPPY_IRQ = sdev->irqs[0];
+	if (op) {
+		floppy_op = op;
+		FLOPPY_IRQ = op->irqs[0];
 	} else {
-#ifdef CONFIG_PCI
-		struct linux_ebus *ebus;
-		struct linux_ebus_device *edev = NULL;
-		unsigned long config = 0;
+		struct device_node *ebus_dp;
 		void __iomem *auxio_reg;
 		const char *state_prop;
+		unsigned long config;
 
-		for_each_ebus(ebus) {
-			for_each_ebusdev(edev, ebus) {
-				if (ebus_fdthree_p(edev))
-					goto ebus_done;
+		dp = NULL;
+		for_each_node_by_name(ebus_dp, "ebus") {
+			for (dp = ebus_dp->child; dp; dp = dp->sibling) {
+				if (ebus_fdthree_p(dp))
+					goto found_fdthree;
 			}
 		}
-	ebus_done:
-		if (!edev)
+	found_fdthree:
+		if (!dp)
+			return 0;
+
+		op = of_find_device_by_node(dp);
+		if (!op)
 			return 0;
 
-		state_prop = of_get_property(edev->prom_node, "status", NULL);
+		state_prop = of_get_property(op->node, "status", NULL);
 		if (state_prop && !strncmp(state_prop, "disabled", 8))
 			return 0;
 
-		FLOPPY_IRQ = edev->irqs[0];
+		FLOPPY_IRQ = op->irqs[0];
 
 		/* Make sure the high density bit is set, some systems
 		 * (most notably Ultra5/Ultra10) come up with it clear.
 		 */
-		auxio_reg = (void __iomem *) edev->resource[2].start;
+		auxio_reg = (void __iomem *) op->resource[2].start;
 		writel(readl(auxio_reg)|0x2, auxio_reg);
 
-		sun_pci_ebus_dev = ebus->self;
+		sun_floppy_dev = &op->dev;
 
 		spin_lock_init(&sun_pci_fd_ebus_dma.lock);
 
 		/* XXX ioremap */
 		sun_pci_fd_ebus_dma.regs = (void __iomem *)
-			edev->resource[1].start;
+			op->resource[1].start;
 		if (!sun_pci_fd_ebus_dma.regs)
 			return 0;
 
@@ -625,7 +621,7 @@ static unsigned long __init sun_floppy_init(void)
 			return 0;
 
 		/* XXX ioremap */
-		sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
+		sun_fdc = (struct sun_flpy_controller *) op->resource[0].start;
 
 		sun_fdops.fd_inb = sun_pci_fd_inb;
 		sun_fdops.fd_outb = sun_pci_fd_outb;
@@ -662,12 +658,15 @@ static unsigned long __init sun_floppy_init(void)
 		/*
 		 * Find NS87303 SuperIO config registers (through ecpp).
 		 */
-		for_each_ebus(ebus) {
-			for_each_ebusdev(edev, ebus) {
-				if (!strcmp(edev->prom_node->name, "ecpp")) {
-					config = edev->resource[1].start;
-					goto config_done;
-				}
+		config = 0;
+		for (dp = ebus_dp->child; dp; dp = dp->sibling) {
+			if (!strcmp(dp->name, "ecpp")) {
+				struct of_device *ecpp_op;
+
+				ecpp_op = of_find_device_by_node(dp);
+				if (ecpp_op)
+					config = ecpp_op->resource[1].start;
+				goto config_done;
 			}
 		}
 	config_done:
@@ -716,26 +715,23 @@ static unsigned long __init sun_floppy_init(void)
 #endif /* PCI_FDC_SWAP_DRIVES */
 
 		return sun_floppy_types[0];
-#else
-		return 0;
-#endif
 	}
-	prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
-	if(!strncmp(state, "disabled", 8))
+	prop = of_get_property(op->node, "status", NULL);
+	if (prop && !strncmp(state, "disabled", 8))
 		return 0;
 
 	/*
-	 * We cannot do sbus_ioremap here: it does request_region,
+	 * We cannot do of_ioremap here: it does request_region,
 	 * which the generic floppy driver tries to do once again.
 	 * But we must use the sdev resource values as they have
 	 * had parent ranges applied.
 	 */
 	sun_fdc = (struct sun_flpy_controller *)
-		(sdev->resource[0].start +
-		 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
+		(op->resource[0].start +
+		 ((op->resource[0].flags & 0x1ffUL) << 32UL));
 
 	/* Last minute sanity check... */
-	if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
+	if (sbus_readb(&sun_fdc->status1_82077) == 0xff) {
 		sun_fdc = (struct sun_flpy_controller *)-1;
 		return 0;
 	}

arch/sparc/include/asm/gpio.h

+#ifndef __ASM_SPARC_GPIO_H
+#define __ASM_SPARC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_SPARC_GPIO_H */

arch/sparc/include/asm/io-unit.h

@@ -55,8 +55,4 @@ struct iounit_struct {
 #define IOUNIT_BMAPM_START	IOUNIT_BMAP2_END
 #define IOUNIT_BMAPM_END	((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
 
-extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
-#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
-extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
-
 #endif /* !(_SPARC_IO_UNIT_H) */

arch/sparc/include/asm/io_32.h

@@ -292,14 +292,6 @@ struct pci_dev;
 extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
 extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
 
-/*
- * Bus number may be in res->flags... somewhere.
- */
-extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
-    unsigned long size, char *name);
-extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
-
-
 /*
  * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
  * so rtc_port is static in it. This should not change unless a new
@@ -308,6 +300,17 @@ extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
 #define RTC_PORT(x)   (rtc_port + (x))
 #define RTC_ALWAYS_BCD  0
 
+static inline int sbus_can_dma_64bit(void)
+{
+	return 0; /* actually, sparc_cpu_model==sun4d */
+}
+static inline int sbus_can_burst64(void)
+{
+	return 0; /* actually, sparc_cpu_model==sun4d */
+}
+struct device;
+extern void sbus_set_sbus64(struct device *, int);
+
 #endif
 
 #define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1

arch/sparc/include/asm/io_64.h

@@ -482,18 +482,16 @@ struct pci_dev;
 extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
 extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
 
-/* Similarly for SBUS. */
-#define sbus_ioremap(__res, __offset, __size, __name) \
-({	unsigned long __ret; \
-	__ret  = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \
-	__ret += (unsigned long) (__offset); \
-	if (! request_region((__ret), (__size), (__name))) \
-		__ret = 0UL; \
-	(void __iomem *) __ret; \
-})
-
-#define sbus_iounmap(__addr, __size)	\
-	release_region((unsigned long)(__addr), (__size))
+static inline int sbus_can_dma_64bit(void)
+{
+	return 1;
+}
+static inline int sbus_can_burst64(void)
+{
+	return 1;
+}
+struct device;
+extern void sbus_set_sbus64(struct device *, int);
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem

arch/sparc/include/asm/iommu_64.h

@@ -48,6 +48,9 @@ struct strbuf {
 	unsigned long		strbuf_control;
 	unsigned long		strbuf_pflush;
 	unsigned long		strbuf_fsync;
+	unsigned long		strbuf_err_stat;
+	unsigned long		strbuf_tag_diag;
+	unsigned long		strbuf_line_diag;
 	unsigned long		strbuf_ctxflush;
 	unsigned long		strbuf_ctxmatch_base;
 	unsigned long		strbuf_flushflag_pa;

arch/sparc/include/asm/irq_64.h

@@ -56,7 +56,6 @@ extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p,
 				    unsigned long imap_base,
 				    unsigned long iclr_base);
 extern void sun4u_destroy_msi(unsigned int virt_irq);
-extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
 
 extern unsigned char virt_irq_alloc(unsigned int dev_handle,
 				    unsigned int dev_ino);

arch/sparc/include/asm/mc146818rtc_64.h

@@ -7,12 +7,8 @@
 #include <asm/io.h>
 
 #ifndef RTC_PORT
-#ifdef CONFIG_PCI
-extern unsigned long ds1287_regs;
-#else
-#define ds1287_regs (0UL)
-#endif
-#define RTC_PORT(x)	(ds1287_regs + (x))
+extern unsigned long cmos_regs;
+#define RTC_PORT(x)	(cmos_regs + (x))
 #define RTC_ALWAYS_BCD	0
 #endif
 
@@ -29,6 +25,4 @@ outb_p((addr),RTC_PORT(0)); \
 outb_p((val),RTC_PORT(1)); \
 })
 
-#define RTC_IRQ 8
-
 #endif /* __ASM_SPARC64_MC146818RTC_H */

arch/sparc/include/asm/memctrl.h

+#ifndef _SPARC_MEMCTRL_H
+#define _SPARC_MEMCTRL_H
+
+typedef int (*dimm_printer_t)(int synd_code, unsigned long paddr, char *buf, int buflen);
+
+int register_dimm_printer(dimm_printer_t func);
+void unregister_dimm_printer(dimm_printer_t func);
+
+#endif /* _SPARC_MEMCTRL_H */

arch/sparc/include/asm/mostek.h

-#ifndef ___ASM_SPARC_MOSTEK_H
-#define ___ASM_SPARC_MOSTEK_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/mostek_64.h>
-#else
-#include <asm/mostek_32.h>
-#endif
-#endif

arch/sparc/include/asm/mostek_32.h

-/*
- * mostek.h:  Describes the various Mostek time of day clock registers.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
- */
-
-#ifndef _SPARC_MOSTEK_H
-#define _SPARC_MOSTEK_H
-
-#include <asm/idprom.h>
-#include <asm/io.h>
-
-/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
- *
- *                             Data
- * Address                                                 Function
- *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
- *   7ff  -     -     -     -    -     -     -     -       Year 00-99
- *   7fe  0     0     0     -    -     -     -     -      Month 01-12
- *   7fd  0     0     -     -    -     -     -     -       Date 01-31
- *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
- *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
- *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
- *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
- *   7f8  W     R     S     -    -     -     -     -    Control
- *
- *   * ST is STOP BIT
- *   * W is WRITE BIT
- *   * R is READ BIT
- *   * S is SIGN BIT
- *   * FT is FREQ TEST BIT
- *   * KS is KICK START BIT
- */
-
-/* The Mostek 48t02 real time clock and NVRAM chip. The registers
- * other than the control register are in binary coded decimal. Some
- * control bits also live outside the control register.
- */
-#define mostek_read(_addr)		readb(_addr)
-#define mostek_write(_addr,_val)	writeb(_val, _addr)
-#define MOSTEK_EEPROM		0x0000UL
-#define MOSTEK_IDPROM		0x07d8UL
-#define MOSTEK_CREG		0x07f8UL
-#define MOSTEK_SEC		0x07f9UL
-#define MOSTEK_MIN		0x07faUL
-#define MOSTEK_HOUR		0x07fbUL
-#define MOSTEK_DOW		0x07fcUL
-#define MOSTEK_DOM		0x07fdUL
-#define MOSTEK_MONTH		0x07feUL
-#define MOSTEK_YEAR		0x07ffUL
-
-struct mostek48t02 {
-	volatile char eeprom[2008];	/* This is the eeprom, don't touch! */
-	struct idprom idprom;		/* The idprom lives here. */
-	volatile unsigned char creg;	/* Control register */
-	volatile unsigned char sec;	/* Seconds (0-59) */
-	volatile unsigned char min;	/* Minutes (0-59) */
-	volatile unsigned char hour;	/* Hour (0-23) */
-	volatile unsigned char dow;	/* Day of the week (1-7) */
-	volatile unsigned char dom;	/* Day of the month (1-31) */
-	volatile unsigned char month;	/* Month of year (1-12) */
-	volatile unsigned char year;	/* Year (0-99) */
-};
-
-extern spinlock_t mostek_lock;
-extern void __iomem *mstk48t02_regs;
-
-/* Control register values. */
-#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
-#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
-#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
-
-/* Control bits that live in the other registers. */
-#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
-#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
-#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
-
-#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
-#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
-
-/* Masks that define how much space each value takes up. */
-#define	MSTK_SEC_MASK	0x7f
-#define	MSTK_MIN_MASK	0x7f
-#define	MSTK_HOUR_MASK	0x3f
-#define	MSTK_DOW_MASK	0x07
-#define	MSTK_DOM_MASK	0x3f
-#define	MSTK_MONTH_MASK	0x1f
-#define	MSTK_YEAR_MASK	0xffU
-
-/* Binary coded decimal conversion macros. */
-#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
-#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
-
-/* Generic register set and get macros for internal use. */
-#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
-#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
-
-/* Macros to make register access easier on our fingers. These give you
- * the decimal value of the register requested if applicable. You pass
- * the a pointer to a 'struct mostek48t02'.
- */
-#define	MSTK_REG_CREG(regs)	(((struct mostek48t02 *)regs)->creg)
-#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,sec,SEC)
-#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,min,MIN)
-#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,hour,HOUR)
-#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,dow,DOW)
-#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,dom,DOM)
-#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,month,MONTH)
-#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,year,YEAR)
-
-#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,sec,value,SEC)
-#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,min,value,MIN)
-#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,hour,value,HOUR)
-#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,dow,value,DOW)
-#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,dom,value,DOM)
-#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,month,value,MONTH)
-#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,year,value,YEAR)
-
-
-/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
- * same (basically) layout of the 48t02 chip except for the extra
- * NVRAM on board (8 KB against the 48t02's 2 KB).
- */
-struct mostek48t08 {
-	char offset[6*1024];         /* Magic things may be here, who knows? */
-	struct mostek48t02 regs;     /* Here is what we are interested in.   */
-};
-
-#ifdef CONFIG_SUN4
-enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
-INTERSIL, MSTK_INVALID };
-#else
-enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
-MSTK_INVALID };
-#endif
-
-#ifdef CONFIG_SUN4
-/* intersil on a sun 4/260 code  data from harris doc */
-struct intersil_dt {
-        volatile unsigned char int_csec;
-        volatile unsigned char int_hour;
-        volatile unsigned char int_min;
-        volatile unsigned char int_sec;
-        volatile unsigned char int_month;
-        volatile unsigned char int_day;
-        volatile unsigned char int_year;
-        volatile unsigned char int_dow;
-};
-
-struct intersil {
-	struct intersil_dt clk;
-	struct intersil_dt cmp;
-	volatile unsigned char int_intr_reg;
-	volatile unsigned char int_cmd_reg;
-};
-
-#define INTERSIL_STOP        0x0
-#define INTERSIL_START       0x8
-#define INTERSIL_INTR_DISABLE   0x0
-#define INTERSIL_INTR_ENABLE   0x10
-#define INTERSIL_32K		0x0
-#define INTERSIL_NORMAL		0x0
-#define INTERSIL_24H		0x4
-#define INTERSIL_INT_100HZ	0x2
-
-/* end of intersil info */
-#endif
-
-#endif /* !(_SPARC_MOSTEK_H) */

arch/sparc/include/asm/mostek_64.h

-/* mostek.h:  Describes the various Mostek time of day clock registers.
- *
- * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- */
-
-#ifndef _SPARC64_MOSTEK_H
-#define _SPARC64_MOSTEK_H
-
-#include <asm/idprom.h>
-
-/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
- *
- *                             Data
- * Address                                                 Function
- *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
- *   7ff  -     -     -     -    -     -     -     -       Year 00-99
- *   7fe  0     0     0     -    -     -     -     -      Month 01-12
- *   7fd  0     0     -     -    -     -     -     -       Date 01-31
- *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
- *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
- *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
- *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
- *   7f8  W     R     S     -    -     -     -     -    Control
- *
- *   * ST is STOP BIT
- *   * W is WRITE BIT
- *   * R is READ BIT
- *   * S is SIGN BIT
- *   * FT is FREQ TEST BIT
- *   * KS is KICK START BIT
- */
-
-/* The Mostek 48t02 real time clock and NVRAM chip. The registers
- * other than the control register are in binary coded decimal. Some
- * control bits also live outside the control register.
- *
- * We now deal with physical addresses for I/O to the chip. -DaveM
- */
-static inline u8 mostek_read(void __iomem *addr)
-{
-	u8 ret;
-
-	__asm__ __volatile__("lduba	[%1] %2, %0"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-	return ret;
-}
-
-static inline void mostek_write(void __iomem *addr, u8 val)
-{
-	__asm__ __volatile__("stba	%0, [%1] %2"
-			     : /* no outputs */
-			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-#define MOSTEK_EEPROM		0x0000UL
-#define MOSTEK_IDPROM		0x07d8UL
-#define MOSTEK_CREG		0x07f8UL
-#define MOSTEK_SEC		0x07f9UL
-#define MOSTEK_MIN		0x07faUL
-#define MOSTEK_HOUR		0x07fbUL
-#define MOSTEK_DOW		0x07fcUL
-#define MOSTEK_DOM		0x07fdUL
-#define MOSTEK_MONTH		0x07feUL
-#define MOSTEK_YEAR		0x07ffUL
-
-extern spinlock_t mostek_lock;
-extern void __iomem *mstk48t02_regs;
-
-/* Control register values. */
-#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
-#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
-#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
-
-/* Control bits that live in the other registers. */
-#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
-#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
-#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
-
-#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
-#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
-
-/* Masks that define how much space each value takes up. */
-#define	MSTK_SEC_MASK	0x7f
-#define	MSTK_MIN_MASK	0x7f
-#define	MSTK_HOUR_MASK	0x3f
-#define	MSTK_DOW_MASK	0x07
-#define	MSTK_DOM_MASK	0x3f
-#define	MSTK_MONTH_MASK	0x1f
-#define	MSTK_YEAR_MASK	0xffU
-
-/* Binary coded decimal conversion macros. */
-#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
-#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
-
-/* Generic register set and get macros for internal use. */
-#define MSTK_GET(regs,name)	\
-	(MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
-#define MSTK_SET(regs,name,value) \
-do {	u8 __val = mostek_read(regs + MOSTEK_ ## name); \
-	__val &= ~(MSTK_ ## name ## _MASK); \
-	__val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
-		  (MSTK_ ## name ## _MASK)); \
-	mostek_write(regs + MOSTEK_ ## name, __val); \
-} while(0)
-
-/* Macros to make register access easier on our fingers. These give you
- * the decimal value of the register requested if applicable. You pass
- * the a pointer to a 'struct mostek48t02'.
- */
-#define	MSTK_REG_CREG(regs)	(mostek_read((regs) + MOSTEK_CREG))
-#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,SEC)
-#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,MIN)
-#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,HOUR)
-#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,DOW)
-#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,DOM)
-#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,MONTH)
-#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,YEAR)
-
-#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,SEC,value)
-#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,MIN,value)
-#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,HOUR,value)
-#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,DOW,value)
-#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,DOM,value)
-#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,MONTH,value)
-#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,YEAR,value)
-
-
-/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
- * same (basically) layout of the 48t02 chip except for the extra
- * NVRAM on board (8 KB against the 48t02's 2 KB).
- */
-#define MOSTEK_48T08_OFFSET	0x0000UL	/* Lower NVRAM portions */
-#define MOSTEK_48T08_48T02	0x1800UL	/* Offset to 48T02 chip */
-
-/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
- * clock chip definitions around just in case.
- */
-#define MOSTEK_48T59_OFFSET	0x0000UL	/* Lower NVRAM portions */
-#define MOSTEK_48T59_48T02	0x1800UL	/* Offset to 48T02 chip */
-
-#endif /* !(_SPARC64_MOSTEK_H) */

arch/sparc/include/asm/obio.h

@@ -155,17 +155,6 @@ static inline void bw_set_ctrl(int cpu, unsigned ctrl)
 			      "i" (ASI_M_CTL));
 }
 
-extern unsigned char cpu_leds[32];
-
-static inline void show_leds(int cpuid)
-{
-	cpuid &= 0x1e;
-	__asm__ __volatile__ ("stba %0, [%1] %2" : :
-			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
-			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
-			      "i" (ASI_M_CTL));
-}
-
 static inline unsigned cc_get_ipen(void)
 {
 	unsigned pending;

arch/sparc/include/asm/of_device.h

@@ -30,6 +30,8 @@ struct of_device
 extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
 extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
 
+extern void of_propagate_archdata(struct of_device *bus);
+
 /* This is just here during the transition */
 #include <linux/of_platform.h>
 

arch/sparc/include/asm/of_platform.h

@@ -13,9 +13,6 @@
  *
  */
 
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
 #define of_bus_type	of_platform_bus_type	/* for compatibility */
 
 #endif

arch/sparc/include/asm/oplib_32.h

@@ -21,7 +21,6 @@ enum prom_major_version {
 	PROM_V2,      /* sun4c and early sun4m V2 prom */
 	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
 	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
-	PROM_SUN4,    /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
 };
 
 extern enum prom_major_version prom_vers;

arch/sparc/include/asm/page_32.h

@@ -8,11 +8,8 @@
 #ifndef _SPARC_PAGE_H
 #define _SPARC_PAGE_H
 
-#ifdef CONFIG_SUN4
-#define PAGE_SHIFT   13
-#else
 #define PAGE_SHIFT   12
-#endif
+
 #ifndef __ASSEMBLY__
 /* I have my suspicions... -DaveM */
 #define PAGE_SIZE    (1UL << PAGE_SHIFT)

arch/sparc/include/asm/page_64.h

@@ -38,6 +38,8 @@
 
 #ifndef __ASSEMBLY__
 
+#define WANT_PAGE_VIRTUAL
+
 extern void _clear_page(void *page);
 #define clear_page(X)	_clear_page((void *)(X))
 struct page;

arch/sparc/include/asm/parport.h

@@ -8,7 +8,7 @@
 
 #include <linux/of_device.h>
 
-#include <asm/ebus.h>
+#include <asm/ebus_dma.h>
 #include <asm/ns87303.h>
 #include <asm/prom.h>
 
@@ -215,7 +215,7 @@ static int __devexit ecpp_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id ecpp_match[] = {
+static const struct of_device_id ecpp_match[] = {
 	{
 		.name = "ecpp",
 	},

arch/sparc/include/asm/pci_32.h

@@ -3,6 +3,8 @@
 
 #ifdef __KERNEL__
 
+#include <linux/dma-mapping.h>
+
 /* Can be used to override the logic in pci_scan_bus for skipping
  * already-configured bus numbers - to be used for buggy BIOSes
  * or architectures with incomplete PCI setup by the loader.

arch/sparc/include/asm/pgtable_32.h

@@ -14,11 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/swap.h>
 #include <asm/types.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
 #include <asm/pgtsun4c.h>
-#endif
 #include <asm/pgtsrmmu.h>
 #include <asm/vac-ops.h>
 #include <asm/oplib.h>

arch/sparc/include/asm/pgtable_64.h

@@ -770,6 +770,8 @@ extern void sun4v_patch_tlb_handlers(void);
 
 extern unsigned long cmdline_memory_size;
 
+extern asmlinkage void do_sparc64_fault(struct pt_regs *regs);
+
 #endif /* !(__ASSEMBLY__) */
 
 #endif /* !(_SPARC64_PGTABLE_H) */

arch/sparc/include/asm/prom.h

@@ -18,6 +18,7 @@
  */
 #include <linux/types.h>
 #include <linux/proc_fs.h>
+#include <linux/mutex.h>
 #include <asm/atomic.h>
 
 #define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	2
@@ -73,6 +74,7 @@ struct of_irq_controller {
 
 extern struct device_node *of_find_node_by_cpuid(int cpuid);
 extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
+extern struct mutex of_set_property_mutex;
 extern int of_getintprop_default(struct device_node *np,
 				 const char *name,
 				 int def);
@@ -94,6 +96,16 @@ static inline void of_node_put(struct device_node *node)
 {
 }
 
+/* These routines are here to provide compatibility with how powerpc
+ * handles IRQ mapping for OF device nodes.  We precompute and permanently
+ * register them in the of_device objects, whereas powerpc computes them
+ * on request.
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
+static inline void irq_dispose_mapping(unsigned int virq)
+{
+}
+
 /*
  * NB:  This is here while we transition from using asm/prom.h
  * to linux/of.h

arch/sparc/include/asm/ptrace_64.h

@@ -113,6 +113,8 @@ struct sparc_trapf {
 
 #ifdef __KERNEL__
 
+#include <linux/threads.h>
+
 static inline int pt_regs_trap_type(struct pt_regs *regs)
 {
 	return regs->magic & 0x1ff;
@@ -138,6 +140,7 @@ struct global_reg_snapshot {
 	struct thread_info	*thread;
 	unsigned long		pad1;
 };
+extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
 
 #define __ARCH_WANT_COMPAT_SYS_PTRACE
 

arch/sparc/include/asm/reboot.h

-#ifndef _SPARC64_REBOOT_H
-#define _SPARC64_REBOOT_H
-
-extern void machine_alt_power_off(void);
-
-#endif /* _SPARC64_REBOOT_H */

arch/sparc/include/asm/rtc.h

-/*
- * rtc.h: Definitions for access to the Mostek real time clock
- *
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- */
-
-#ifndef _RTC_H
-#define _RTC_H
-
-#include <linux/ioctl.h>
-
-struct rtc_time
-{
-	int	sec;	/* Seconds (0-59) */
-	int	min;	/* Minutes (0-59) */
-	int	hour;	/* Hour (0-23) */
-	int	dow;	/* Day of the week (1-7) */
-	int	dom;	/* Day of the month (1-31) */
-	int	month;	/* Month of year (1-12) */
-	int	year;	/* Year (0-99) */
-};
-
-#define RTCGET _IOR('p', 20, struct rtc_time)
-#define RTCSET _IOW('p', 21, struct rtc_time)
-
-#endif

arch/sparc/include/asm/sbus.h

-#ifndef ___ASM_SPARC_SBUS_H
-#define ___ASM_SPARC_SBUS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/sbus_64.h>
-#else
-#include <asm/sbus_32.h>
-#endif
-#endif

arch/sparc/include/asm/sbus_32.h

-/*
- * sbus.h:  Defines for the Sun SBus.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_SBUS_H
-#define _SPARC_SBUS_H
-
-#include <linux/dma-mapping.h>
-#include <linux/ioport.h>
-#include <linux/of_device.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/scatterlist.h>
-
-/* We scan which devices are on the SBus using the PROM node device
- * tree.  SBus devices are described in two different ways.  You can
- * either get an absolute address at which to access the device, or
- * you can get a SBus 'slot' number and an offset within that slot.
- */
-
-/* The base address at which to calculate device OBIO addresses. */
-#define SUN_SBUS_BVADDR        0xf8000000
-#define SBUS_OFF_MASK          0x01ffffff
-
-/* These routines are used to calculate device address from slot
- * numbers + offsets, and vice versa.
- */
-
-static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
-{
-  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
-}
-
-static inline int sbus_dev_slot(unsigned long dev_addr)
-{
-  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
-}
-
-struct sbus_bus;
-
-/* Linux SBUS device tables */
-struct sbus_dev {
-	struct of_device	ofdev;
-	struct sbus_bus		*bus;
-	struct sbus_dev		*next;
-	struct sbus_dev		*child;
-	struct sbus_dev		*parent;
-	int prom_node;
-	char prom_name[64];
-	int slot;
-
-	struct resource resource[PROMREG_MAX];
-
-	struct linux_prom_registers reg_addrs[PROMREG_MAX];
-	int num_registers;
-
-	struct linux_prom_ranges device_ranges[PROMREG_MAX];
-	int num_device_ranges;
-
-	unsigned int irqs[4];
-	int num_irqs;
-};
-#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
-
-/* This struct describes the SBus(s) found on this machine. */
-struct sbus_bus {
-	struct of_device	ofdev;
-	struct sbus_dev		*devices;	/* Link to devices on this SBus */
-	struct sbus_bus		*next;		/* next SBus, if more than one SBus */
-	int			prom_node;	/* PROM device tree node for this SBus */
-	char			prom_name[64];  /* Usually "sbus" or "sbi" */
-	int			clock_freq;
-
-	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
-	int num_sbus_ranges;
-
-	int devid;
-	int board;
-};
-#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
-
-extern struct sbus_bus *sbus_root;
-
-static inline int
-sbus_is_slave(struct sbus_dev *dev)
-{
-	/* XXX Have to write this for sun4c's */
-	return 0;
-}
-
-/* Device probing routines could find these handy */
-#define for_each_sbus(bus) \
-        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
-
-#define for_each_sbusdev(device, bus) \
-        for((device) = (bus)->devices; (device); (device)=(device)->next)
-
-#define for_all_sbusdev(device, bus) \
-	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
-		for ((device) = (bus)->devices; (device); (device) = (device)->next)
-
-/* Driver DVMA interfaces. */
-#define sbus_can_dma_64bit(sdev)	(0) /* actually, sparc_cpu_model==sun4d */
-#define sbus_can_burst64(sdev)		(0) /* actually, sparc_cpu_model==sun4d */
-extern void sbus_set_sbus64(struct sbus_dev *, int);
-extern void sbus_fill_device_irq(struct sbus_dev *);
-
-/* These yield IOMMU mappings in consistent mode. */
-extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
-extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
-void prom_adjust_ranges(struct linux_prom_ranges *, int,
-			struct linux_prom_ranges *, int);
-
-#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
-#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
-#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
-#define	SBUS_DMA_NONE		DMA_NONE
-
-/* All the rest use streaming mode mappings. */
-extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
-extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
-extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
-extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
-
-/* Finally, allow explicit synchronization of streamable mappings. */
-extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
-#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
-extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
-extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
-#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
-extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
-
-/* Eric Brower (ebrower@usa.net)
- * Translate SBus interrupt levels to ino values--
- * this is used when converting sbus "interrupts" OBP
- * node values to "intr" node values, and is platform
- * dependent.  If only we could call OBP with
- * "sbus-intr>cpu (sbint -- ino)" from kernel...
- * See .../drivers/sbus/sbus.c for details.
- */
-BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
-#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
-
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
-extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
-extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
-extern int sbus_arch_preinit(void);
-extern void sbus_arch_postinit(void);
-
-#endif /* !(_SPARC_SBUS_H) */

arch/sparc/include/asm/sbus_64.h

-/* sbus.h: Defines for the Sun SBus.
- *
- * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC64_SBUS_H
-#define _SPARC64_SBUS_H
-
-#include <linux/dma-mapping.h>
-#include <linux/ioport.h>
-#include <linux/of_device.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/iommu.h>
-#include <asm/scatterlist.h>
-
-/* We scan which devices are on the SBus using the PROM node device
- * tree.  SBus devices are described in two different ways.  You can
- * either get an absolute address at which to access the device, or
- * you can get a SBus 'slot' number and an offset within that slot.
- */
-
-/* The base address at which to calculate device OBIO addresses. */
-#define SUN_SBUS_BVADDR        0x00000000
-#define SBUS_OFF_MASK          0x0fffffff
-
-/* These routines are used to calculate device address from slot
- * numbers + offsets, and vice versa.
- */
-
-static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
-{
-  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
-}
-
-static inline int sbus_dev_slot(unsigned long dev_addr)
-{
-  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
-}
-
-struct sbus_bus;
-
-/* Linux SBUS device tables */
-struct sbus_dev {
-	struct of_device	ofdev;
-	struct sbus_bus		*bus;
-	struct sbus_dev		*next;
-	struct sbus_dev		*child;
-	struct sbus_dev		*parent;
-	int prom_node;
-	char prom_name[64];
-	int slot;
-
-	struct resource resource[PROMREG_MAX];
-
-	struct linux_prom_registers reg_addrs[PROMREG_MAX];
-	int num_registers;
-
-	struct linux_prom_ranges device_ranges[PROMREG_MAX];
-	int num_device_ranges;
-
-	unsigned int irqs[4];
-	int num_irqs;
-};
-#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
-
-/* This struct describes the SBus(s) found on this machine. */
-struct sbus_bus {
-	struct of_device	ofdev;
-	struct sbus_dev		*devices;	/* Tree of SBUS devices	*/
-	struct sbus_bus		*next;		/* Next SBUS in system	*/
-	int			prom_node;      /* OBP node of SBUS	*/
-	char			prom_name[64];	/* Usually "sbus" or "sbi" */
-	int			clock_freq;
-
-	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
-	int num_sbus_ranges;
-
-	int portid;
-};
-#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
-
-extern struct sbus_bus *sbus_root;
-
-/* Device probing routines could find these handy */
-#define for_each_sbus(bus) \
-        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
-
-#define for_each_sbusdev(device, bus) \
-        for((device) = (bus)->devices; (device); (device)=(device)->next)
-
-#define for_all_sbusdev(device, bus) \
-	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
-		for ((device) = (bus)->devices; (device); (device) = (device)->next)
-
-/* Driver DVMA interfaces. */
-#define sbus_can_dma_64bit(sdev)	(1)
-#define sbus_can_burst64(sdev)		(1)
-extern void sbus_set_sbus64(struct sbus_dev *, int);
-extern void sbus_fill_device_irq(struct sbus_dev *);
-
-static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size,
-					  dma_addr_t *dma_handle)
-{
-	return dma_alloc_coherent(&sdev->ofdev.dev, size,
-				  dma_handle, GFP_ATOMIC);
-}
-
-static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size,
-					void *vaddr, dma_addr_t dma_handle)
-{
-	return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle);
-}
-
-#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
-#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
-#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
-#define	SBUS_DMA_NONE		DMA_NONE
-
-/* All the rest use streaming mode mappings. */
-static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr,
-					 size_t size, int direction)
-{
-	return dma_map_single(&sdev->ofdev.dev, ptr, size,
-			      (enum dma_data_direction) direction);
-}
-
-static inline void sbus_unmap_single(struct sbus_dev *sdev,
-				     dma_addr_t dma_addr, size_t size,
-				     int direction)
-{
-	dma_unmap_single(&sdev->ofdev.dev, dma_addr, size,
-			 (enum dma_data_direction) direction);
-}
-
-static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg,
-			      int nents, int direction)
-{
-	return dma_map_sg(&sdev->ofdev.dev, sg, nents,
-			  (enum dma_data_direction) direction);
-}
-
-static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg,
-				 int nents, int direction)
-{
-	dma_unmap_sg(&sdev->ofdev.dev, sg, nents,
-		     (enum dma_data_direction) direction);
-}
-
-/* Finally, allow explicit synchronization of streamable mappings. */
-static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev,
-						dma_addr_t dma_handle,
-						size_t size, int direction)
-{
-	dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size,
-				(enum dma_data_direction) direction);
-}
-#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
-
-static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev,
-						   dma_addr_t dma_handle,
-						   size_t size, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev,
-					    struct scatterlist *sg,
-					    int nents, int direction)
-{
-	dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents,
-			    (enum dma_data_direction) direction);
-}
-#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
-
-static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev,
-					       struct scatterlist *sg,
-					       int nents, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
-extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
-extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
-extern int sbus_arch_preinit(void);
-extern void sbus_arch_postinit(void);
-
-#endif /* !(_SPARC64_SBUS_H) */

arch/sparc/include/asm/spinlock_32.h

@@ -6,8 +6,6 @@
 #ifndef __SPARC_SPINLOCK_H
 #define __SPARC_SPINLOCK_H
 
-#include <linux/threads.h>	/* For NR_CPUS */
-
 #ifndef __ASSEMBLY__
 
 #include <asm/psr.h>

arch/sparc/include/asm/spinlock_64.h

@@ -6,8 +6,6 @@
 #ifndef __SPARC64_SPINLOCK_H
 #define __SPARC64_SPINLOCK_H
 
-#include <linux/threads.h>	/* For NR_CPUS */
-
 #ifndef __ASSEMBLY__
 
 /* To get debugging spinlocks which detect and catch

arch/sparc/include/asm/sstate.h

-#ifndef _SPARC64_SSTATE_H
-#define _SPARC64_SSTATE_H
-
-extern void sstate_booting(void);
-extern void sstate_running(void);
-extern void sstate_halt(void);
-extern void sstate_poweroff(void);
-extern void sstate_panic(void);
-extern void sstate_reboot(void);
-
-extern void sun4v_sstate_init(void);
-
-#endif /* _SPARC64_SSTATE_H */

arch/sparc/include/asm/starfire.h

@@ -12,7 +12,6 @@
 extern int this_is_starfire;
 
 extern void check_if_starfire(void);
-extern void starfire_cpu_setup(void);
 extern int starfire_hard_smp_processor_id(void);
 extern void starfire_hookup(int);
 extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);

arch/sparc/include/asm/sun4paddr.h

-/*
- * sun4paddr.h:  Various physical addresses on sun4 machines
- *
- * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
- * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
- * 
- * Now supports more sun4's
- */
-
-#ifndef _SPARC_SUN4PADDR_H
-#define _SPARC_SUN4PADDR_H
-
-#define SUN4_IE_PHYSADDR		0xf5000000
-#define SUN4_UNUSED_PHYSADDR		0
-
-/* these work for me */
-#define SUN4_200_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_200_CLOCK_PHYSADDR		0xf3000000
-#define SUN4_200_BWTWO_PHYSADDR		0xfd000000
-#define SUN4_200_ETH_PHYSADDR		0xf6000000
-#define SUN4_200_SI_PHYSADDR		0xff200000
-
-/* these were here before */
-#define SUN4_300_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_300_CLOCK_PHYSADDR		0xf2000000
-#define SUN4_300_TIMER_PHYSADDR		0xef000000
-#define SUN4_300_ETH_PHYSADDR		0xf9000000
-#define SUN4_300_BWTWO_PHYSADDR		0xfb400000
-#define SUN4_300_DMA_PHYSADDR		0xfa001000
-#define SUN4_300_ESP_PHYSADDR		0xfa000000
-
-/* Are these right? */
-#define SUN4_400_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_400_CLOCK_PHYSADDR		0xf2000000
-#define SUN4_400_TIMER_PHYSADDR		0xef000000
-#define SUN4_400_ETH_PHYSADDR		0xf9000000
-#define SUN4_400_BWTWO_PHYSADDR		0xfb400000
-#define SUN4_400_DMA_PHYSADDR		0xfa001000
-#define SUN4_400_ESP_PHYSADDR		0xfa000000
-
-/* 
-	these are the actual values set and used in the code. Unused items set 
-	to SUN_UNUSED_PHYSADDR 
- */
-
-extern int sun4_memreg_physaddr; /* memory register (ecc?) */
-extern int sun4_clock_physaddr;  /* system clock */
-extern int sun4_timer_physaddr;  /* timer, where applicable */
-extern int sun4_eth_physaddr;    /* onboard ethernet (ie/le) */
-extern int sun4_si_physaddr;     /* sun3 scsi adapter */
-extern int sun4_bwtwo_physaddr;  /* onboard bw2 */
-extern int sun4_dma_physaddr;    /* scsi dma */
-extern int sun4_esp_physaddr;    /* esp scsi */
-extern int sun4_ie_physaddr;     /* interrupt enable */
-
-#endif /* !(_SPARC_SUN4PADDR_H) */

arch/sparc/include/asm/sun4prom.h

-/*
- * sun4prom.h -- interface to sun4 PROM monitor.  We don't use most of this,
- *               so most of these are just placeholders.
- */
-
-#ifndef _SUN4PROM_H_
-#define _SUN4PROM_H_
-
-/*
- * Although this looks similar to an romvec for a OpenProm machine, it is 
- * actually closer to what was used in the Sun2 and Sun3.
- *
- * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
- * 
- * Many of the function prototypes are guesses.  Some are certainly wrong.
- * Use with care.
- */
-
-typedef struct {
-	char		*initSP;		/* Initial system stack ptr */
-	void		(*startmon)(void);	/* Initial PC for hardware */
-	int		*diagberr;		/* Bus err handler for diags */
-	struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
- 	unsigned int	*memorysize;		/* Usable memory in bytes */
-	unsigned char	(*getchar)(void);	/* Get char from input device */ 
-	void		(*putchar)(char);	/* Put char to output device */
-	int		(*mayget)(void);	/* Maybe get char, or -1 */
-	int		(*mayput)(int);		/* Maybe put char, or -1 */
-	unsigned char	*echo;			/* Should getchar echo? */
-	unsigned char	*insource;		/* Input source selector */
-	unsigned char	*outsink;		/* Output sink selector */
-	int		(*getkey)(void);	/* Get next key if one exists */
-	void		(*initgetkey)(void);	/* Initialize get key */
-	unsigned int	*translation;		/* Kbd translation selector */
-	unsigned char	*keybid;		/* Keyboard ID byte */
-	int		*screen_x;		/* V2: Screen x pos (r/o) */
-	int		*screen_y;		/* V2: Screen y pos (r/o) */
-	struct keybuf	*keybuf;		/* Up/down keycode buffer */
-	char		*monid;			/* Monitor version ID */
-	void		(*fbwritechar)(char);	/* Write a character to FB */
-	int		*fbAddr;		/* Address of frame buffer */
-	char		**font;			/* Font table for FB */
-	void		(*fbwritestr)(char *);	/* Write string to FB */
-	void		(*reboot)(char *);	/* e.g. reboot("sd()vmlinux") */
-	unsigned char	*linebuf;		/* The line input buffer */
-	unsigned char	**lineptr;		/* Cur pointer into linebuf */
-	int		*linesize;		/* length of line in linebuf */
-	void		(*getline)(char *);	/* Get line from user */
-	unsigned char	(*getnextchar)(void);	/* Get next char from linebuf */
-	unsigned char	(*peeknextchar)(void);	/* Peek at next char */
-	int		*fbthere;		/* =1 if frame buffer there */
-	int		(*getnum)(void);	/* Grab hex num from line */
-	int		(*printf)(char *, ...);	/* See prom_printf() instead */ 
-	void		(*printhex)(int);	/* Format N digits in hex */
-	unsigned char	*leds;			/* RAM copy of LED register */
-	void		(*setLEDs)(unsigned char *);	/* Sets LED's and RAM copy */
-	void		(*NMIaddr)(void *);	/* Addr for level 7 vector */
-	void		(*abortentry)(void);	/* Entry for keyboard abort */
-	int		*nmiclock;		/* Counts up in msec */
-	int		*FBtype;		/* Frame buffer type */
- 	unsigned int	romvecversion;		/* Version number for this romvec */
-	struct globram  *globram;		/* monitor global variables ??? */
-	void *		kbdaddr;		/* Addr of keyboard in use */
-	int		*keyrinit;		/* ms before kbd repeat */
-	unsigned char	*keyrtick; 		/* ms between repetitions */
-	unsigned int	*memoryavail;		/* V1: Main mem usable size */
-	long		*resetaddr;		/* where to jump on a reset */
-	long		*resetmap;		/* pgmap entry for resetaddr */
-	void		(*exittomon)(void);	/* Exit from user program */
-	unsigned char	**memorybitmap;		/* V1: &{0 or &bits} */
-	void		(*setcxsegmap)(int ctxt, char *va, int pmeg);	/* Set seg in any context */
-	void		(**vector_cmd)(void *);	/* V2: Handler for 'v' cmd */
-	unsigned long	*expectedtrapsig;	/* V3: Location of the expected trap signal */
-	unsigned long	*trapvectorbasetable;	/* V3: Address of the trap vector table */
-	int		unused1;
-	int		unused2;
-	int		unused3;
-	int		unused4;
-} linux_sun4_romvec;
-
-extern linux_sun4_romvec *sun4_romvec;
-
-#endif /* _SUN4PROM_H_ */

arch/sparc/include/asm/system_32.h

@@ -34,13 +34,7 @@ enum sparc_cpu {
 
 extern enum sparc_cpu sparc_cpu_model;
 
-#ifndef CONFIG_SUN4
-#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
-#define ARCH_SUN4 0
-#else
-#define ARCH_SUN4C_SUN4 1
-#define ARCH_SUN4 1
-#endif
+#define ARCH_SUN4C (sparc_cpu_model==sun4c)
 
 #define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
 
@@ -55,6 +49,7 @@ extern unsigned long empty_zero_page;
 extern void sun_do_break(void);
 extern int serial_console;
 extern int stop_a_enabled;
+extern int scons_pwroff;
 
 static inline int con_is_present(void)
 {

arch/sparc/include/asm/system_64.h

@@ -26,9 +26,8 @@ enum sparc_cpu {
 
 #define sparc_cpu_model sun4u
 
-/* This cannot ever be a sun4c nor sun4 :) That's just history. */
-#define ARCH_SUN4C_SUN4 0
-#define ARCH_SUN4 0
+/* This cannot ever be a sun4c :) That's just history. */
+#define ARCH_SUN4C 0
 
 extern char reboot_command[];
 
@@ -118,6 +117,7 @@ do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
 
 extern void sun_do_break(void);
 extern int stop_a_enabled;
+extern int scons_pwroff;
 
 extern void fault_in_user_windows(void);
 extern void synchronize_user_stack(void);

arch/sparc/include/asm/thread_info_32.h

@@ -80,11 +80,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
 /*
  * thread information allocation
  */
-#if PAGE_SHIFT == 13
-#define THREAD_INFO_ORDER  0
-#else /* PAGE_SHIFT */
 #define THREAD_INFO_ORDER  1
-#endif
 
 #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
 

arch/sparc/include/asm/timer_32.h

@@ -9,96 +9,9 @@
 #define _SPARC_TIMER_H
 
 #include <asm/system.h>  /* For SUN4M_NCPUS */
-#include <asm/sun4paddr.h>
 #include <asm/btfixup.h>
 
-/* Timer structures. The interrupt timer has two properties which
- * are the counter (which is handled in do_timer in sched.c) and the limit.
- * This limit is where the timer's counter 'wraps' around. Oddly enough,
- * the sun4c timer when it hits the limit wraps back to 1 and not zero
- * thus when calculating the value at which it will fire a microsecond you
- * must adjust by one.  Thanks SUN for designing such great hardware ;(
- */
-
-/* Note that I am only going to use the timer that interrupts at
- * Sparc IRQ 10.  There is another one available that can fire at
- * IRQ 14. Currently it is left untouched, we keep the PROM's limit
- * register value and let the prom take these interrupts.  This allows
- * L1-A to work.
- */
-
-struct sun4c_timer_info {
-  __volatile__ unsigned int cur_count10;
-  __volatile__ unsigned int timer_limit10;
-  __volatile__ unsigned int cur_count14;
-  __volatile__ unsigned int timer_limit14;
-};
-
-#define SUN4C_TIMER_PHYSADDR   0xf3000000
-#ifdef CONFIG_SUN4
-#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
-#else
-#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
-#endif
-
-/* A sun4m has two blocks of registers which are probably of the same
- * structure. LSI Logic's L64851 is told to _decrement_ from the limit
- * value. Aurora behaves similarly but its limit value is compacted in
- * other fashion (it's wider). Documented fields are defined here.
- */
-
-/* As with the interrupt register, we have two classes of timer registers
- * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
- * only level 14 ticks, master timer hits all cpus and is level 10.
- */
-
-#define SUN4M_PRM_CNT_L       0x80000000
-#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
-
-struct sun4m_timer_percpu_info {
-  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
-  __volatile__ unsigned int l14_cur_count;
-
-  /* This register appears to be write only and/or inaccessible
-   * on Uni-Processor sun4m machines.
-   */
-  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
-
-  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
-  __volatile__ unsigned char space[PAGE_SIZE - 16];
-};
-
-struct sun4m_timer_regs {
-	struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
-	volatile unsigned int l10_timer_limit;
-	volatile unsigned int l10_cur_count;
-
-	/* Again, this appears to be write only and/or inaccessible
-	 * on uni-processor sun4m machines.
-	 */
-	volatile unsigned int l10_limit_noclear;
-
-	/* This register too, it must be magic. */
-	volatile unsigned int foobar;
-
-	volatile unsigned int cfg;     /* equals zero at boot time... */
-};
-
-#define SUN4D_PRM_CNT_L       0x80000000
-#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
-
-struct sun4d_timer_regs {
-	volatile unsigned int l10_timer_limit;
-	volatile unsigned int l10_cur_countx;
-	volatile unsigned int l10_limit_noclear;
-	volatile unsigned int ctrl;
-	volatile unsigned int l10_cur_count;
-};
-
-extern struct sun4d_timer_regs *sun4d_timers;
-
 extern __volatile__ unsigned int *master_l10_counter;
-extern __volatile__ unsigned int *master_l10_limit;
 
 /* FIXME: Make do_[gs]ettimeofday btfixup calls */
 BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)

arch/sparc/include/asm/vac-ops.h

@@ -76,11 +76,7 @@
  * cacheable bit in the pte's of all such pages.
  */
 
-#ifdef CONFIG_SUN4
-#define S4CVAC_BADBITS     0x0001e000
-#else
 #define S4CVAC_BADBITS    0x0000f000
-#endif
 
 /* The following is true if vaddr1 and vaddr2 would cause
  * a 'bad alias'.
@@ -94,10 +90,7 @@
  */
 struct sun4c_vac_props {
 	unsigned int num_bytes;     /* Size of the cache */
-	unsigned int num_lines;     /* Number of cache lines */
 	unsigned int do_hwflushes;  /* Hardware flushing available? */
-	enum { VAC_NONE, VAC_WRITE_THROUGH,
-	    VAC_WRITE_BACK } type;  /* What type of VAC? */
 	unsigned int linesize;      /* Size of each line in bytes */
 	unsigned int log2lsize;     /* log2(linesize) */
 	unsigned int on;            /* VAC is enabled */

arch/sparc/include/asm/vfc_ioctls.h

-/* Copyright (c) 1996 by Manish Vachharajani */
-
-#ifndef _LINUX_VFC_IOCTLS_H_
-#define	_LINUX_VFC_IOCTLS_H_
-
-	/* IOCTLs */
-#define VFC_IOCTL(a)          (('j' << 8) | a)
-#define VFCGCTRL	(VFC_IOCTL (0))	        /* get vfc attributes */
-#define VFCSCTRL	(VFC_IOCTL (1))  	/* set vfc attributes */
-#define VFCGVID		(VFC_IOCTL (2)) 	/* get video decoder attributes */
-#define VFCSVID		(VFC_IOCTL (3))	        /* set video decoder attributes */
-#define VFCHUE		(VFC_IOCTL (4))   	/* set hue */
-#define VFCPORTCHG	(VFC_IOCTL (5))  	/* change port */
-#define VFCRDINFO	(VFC_IOCTL (6))  	/* read info */
-
-	/* Options for setting the vfc attributes and status */
-#define MEMPRST		0x1	/* reset FIFO ptr. */
-#define CAPTRCMD	0x2	/* start capture and wait */
-#define DIAGMODE	0x3	/* diag mode */
-#define NORMMODE	0x4	/* normal mode */
-#define CAPTRSTR	0x5	/* start capture */
-#define CAPTRWAIT	0x6	/* wait for capture to finish */
-
-
-	/* Options for the decoder */
-#define STD_NTSC	0x1	/* NTSC mode */
-#define STD_PAL		0x2	/* PAL mode */
-#define COLOR_ON	0x3	/* force color ON */
-#define MONO		0x4	/* force color OFF */
-
-	/* Values returned by ioctl 2 */
-
-#define NO_LOCK	        1
-#define NTSC_COLOR	2
-#define NTSC_NOCOLOR    3
-#define PAL_COLOR	4
-#define PAL_NOCOLOR	5
-
-/* Not too sure what this does yet */
-	/* Options for setting Field number */
-#define ODD_FIELD	0x1
-#define EVEN_FIELD	0x0
-#define ACTIVE_ONLY     0x2
-#define NON_ACTIVE	0x0
-
-/* Debug options */
-#define VFC_I2C_SEND 0
-#define VFC_I2C_RECV 1
-
-struct vfc_debug_inout
-{
-	unsigned long addr;
-	unsigned long ret;
-	unsigned long len;
-	unsigned char __user *buffer;
-};
-
-#endif /* _LINUX_VFC_IOCTLS_H_ */

arch/sparc/include/asm/visasm.h

@@ -57,6 +57,7 @@ static inline void save_and_clear_fpu(void) {
 "		" : : "i" (FPRS_FEF|FPRS_DU) :
 		"o5", "g1", "g2", "g3", "g7", "cc");
 }
+extern int vis_emul(struct pt_regs *, unsigned int);
 #endif
 
 #endif /* _SPARC64_ASI_H */

arch/sparc/kernel/Makefile

@@ -13,15 +13,13 @@ obj-y    := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
 	    time.o windows.o cpu.o devices.o \
 	    tadpole.o tick14.o ptrace.o \
 	    unaligned.o una_asm.o muldiv.o \
-	    prom.o of_device.o devres.o
+	    prom.o of_device.o devres.o dma.o
 
 devres-y = ../../../kernel/irq/devres.o
 
 obj-$(CONFIG_PCI) += pcic.o
-obj-$(CONFIG_SUN4) += sun4setup.o
 obj-$(CONFIG_SMP) += trampoline.o smp.o sun4m_smp.o sun4d_smp.o
 obj-$(CONFIG_SUN_AUXIO) += auxio.o
-obj-$(CONFIG_PCI) += ebus.o
 obj-$(CONFIG_SUN_PM) += apc.o pmc.o
 obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o
 obj-$(CONFIG_SPARC_LED) += led.o

arch/sparc/kernel/apc.c

@@ -12,9 +12,10 @@
 #include <linux/miscdevice.h>
 #include <linux/smp_lock.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/oplib.h>
 #include <asm/uaccess.h>
 #include <asm/auxio.h>
@@ -29,11 +30,10 @@
 #define APC_OBPNAME	"power-management"
 #define APC_DEVNAME "apc"
 
-volatile static u8 __iomem *regs; 
-static int apc_regsize;
+static u8 __iomem *regs;
 static int apc_no_idle __initdata = 0;
 
-#define apc_readb(offs)			(sbus_readb(regs+offs))
+#define apc_readb(offs)		(sbus_readb(regs+offs))
 #define apc_writeb(val, offs) 	(sbus_writeb(val, regs+offs))
 
 /* Specify "apc=noidle" on the kernel command line to 
@@ -69,9 +69,9 @@ static void apc_swift_idle(void)
 #endif
 } 
 
-static inline void apc_free(void)
+static inline void apc_free(struct of_device *op)
 {
-	sbus_iounmap(regs, apc_regsize);
+	of_iounmap(&op->resource[0], regs, resource_size(&op->resource[0]));
 }
 
 static int apc_open(struct inode *inode, struct file *f)
@@ -153,52 +153,56 @@ static const struct file_operations apc_fops = {
 
 static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops };
 
-static int __init apc_probe(void)
+static int __devinit apc_probe(struct of_device *op,
+			       const struct of_device_id *match)
 {
-	struct sbus_bus *sbus = NULL;
-	struct sbus_dev *sdev = NULL;
-	int iTmp = 0;
-
-	for_each_sbus(sbus) {
-		for_each_sbusdev(sdev, sbus) {
-			if (!strcmp(sdev->prom_name, APC_OBPNAME)) {
-				goto sbus_done;
-			}
-		}
-	}
+	int err;
 
-sbus_done:
-	if (!sdev) {
-		return -ENODEV;
-	}
-
-	apc_regsize = sdev->reg_addrs[0].reg_size;
-	regs = sbus_ioremap(&sdev->resource[0], 0, 
-				   apc_regsize, APC_OBPNAME);
-	if(!regs) {
+	regs = of_ioremap(&op->resource[0], 0,
+			  resource_size(&op->resource[0]), APC_OBPNAME);
+	if (!regs) {
 		printk(KERN_ERR "%s: unable to map registers\n", APC_DEVNAME);
 		return -ENODEV;
 	}
 
-	iTmp = misc_register(&apc_miscdev);
-	if (iTmp != 0) {
+	err = misc_register(&apc_miscdev);
+	if (err) {
 		printk(KERN_ERR "%s: unable to register device\n", APC_DEVNAME);
-		apc_free();
+		apc_free(op);
 		return -ENODEV;
 	}
 
 	/* Assign power management IDLE handler */
-	if(!apc_no_idle)
+	if (!apc_no_idle)
 		pm_idle = apc_swift_idle;	
 
 	printk(KERN_INFO "%s: power management initialized%s\n", 
-		APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : "");
+	       APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : "");
+
 	return 0;
 }
 
+static struct of_device_id __initdata apc_match[] = {
+	{
+		.name = APC_OBPNAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, apc_match);
+
+static struct of_platform_driver apc_driver = {
+	.name		= "apc",
+	.match_table	= apc_match,
+	.probe		= apc_probe,
+};
+
+static int __init apc_init(void)
+{
+	return of_register_driver(&apc_driver, &of_bus_type);
+}
+
 /* This driver is not critical to the boot process
  * and is easiest to ioremap when SBus is already
  * initialized, so we install ourselves thusly:
  */
-__initcall(apc_probe);
-
+__initcall(apc_init);

arch/sparc/kernel/auxio.c

@@ -6,6 +6,8 @@
 #include <linux/stddef.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <asm/oplib.h>
 #include <asm/io.h>
 #include <asm/auxio.h>
@@ -59,7 +61,7 @@ void __init auxio_probe(void)
 	r.flags = auxregs[0].which_io & 0xF;
 	r.start = auxregs[0].phys_addr;
 	r.end = auxregs[0].phys_addr + auxregs[0].reg_size - 1;
-	auxio_register = sbus_ioremap(&r, 0, auxregs[0].reg_size, "auxio");
+	auxio_register = of_ioremap(&r, 0, auxregs[0].reg_size, "auxio");
 	/* Fix the address on sun4m and sun4c. */
 	if((((unsigned long) auxregs[0].phys_addr) & 3) == 3 ||
 	   sparc_cpu_model == sun4c)
@@ -128,7 +130,7 @@ void __init auxio_power_probe(void)
 	r.flags = regs.which_io & 0xF;
 	r.start = regs.phys_addr;
 	r.end = regs.phys_addr + regs.reg_size - 1;
-	auxio_power_register = (unsigned char *) sbus_ioremap(&r, 0,
+	auxio_power_register = (unsigned char *) of_ioremap(&r, 0,
 	    regs.reg_size, "auxpower");
 
 	/* Display a quick message on the console. */

arch/sparc/kernel/devices.c

@@ -143,7 +143,7 @@ void __init device_scan(void)
 #endif
 	clock_stop_probe();
 
-	if (ARCH_SUN4C_SUN4)
+	if (ARCH_SUN4C)
 		sun4c_probe_memerr_reg();
 
 	return;

arch/sparc/kernel/dma.c

+/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc.
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#ifdef CONFIG_PCI
+#include <linux/pci.h>
+#endif
+
+#include "dma.h"
+
+int dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_dma_supported(to_pci_dev(dev), mask);
+#endif
+	return 0;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+#endif
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t flag)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
+#endif
+	return sbus_alloc_consistent(dev, size, dma_handle);
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size,
+		       void *cpu_addr, dma_addr_t dma_handle)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_free_consistent(to_pci_dev(dev), size,
+				    cpu_addr, dma_handle);
+		return;
+	}
+#endif
+	sbus_free_consistent(dev, size, cpu_addr, dma_handle);
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+			  size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_single(to_pci_dev(dev), cpu_addr,
+				      size, (int)direction);
+#endif
+	return sbus_map_single(dev, cpu_addr, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_map_single);
+
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+		      size_t size,
+		      enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_single(to_pci_dev(dev), dma_addr,
+				 size, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_single(dev, dma_addr, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			unsigned long offset, size_t size,
+			enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_page(to_pci_dev(dev), page, offset,
+				    size, (int)direction);
+#endif
+	return sbus_map_single(dev, page_address(page) + offset,
+			       size, (int)direction);
+}
+EXPORT_SYMBOL(dma_map_page);
+
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+		    size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_page(to_pci_dev(dev), dma_address,
+			       size, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_single(dev, dma_address, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_page);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
+#endif
+	return sbus_map_sg(dev, sg, nents, direction);
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		  int nents, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_sg(dev, sg, nents, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_sg);
+
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			     size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
+					    size, (int)direction);
+		return;
+	}
+#endif
+	sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
+}
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+				size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
+					       size, (int)direction);
+		return;
+	}
+#endif
+	sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
+}
+EXPORT_SYMBOL(dma_sync_single_for_device);
+
+void dma_sync_single_range_for_cpu(struct device *dev,
+				   dma_addr_t dma_handle,
+				   unsigned long offset,
+				   size_t size,
+				   enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
+
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
+
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+			 int nelems, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg,
+					nelems, (int)direction);
+		return;
+	}
+#endif
+	BUG();
+}
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+
+void dma_sync_sg_for_device(struct device *dev,
+			    struct scatterlist *sg, int nelems,
+			    enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_sg_for_device(to_pci_dev(dev), sg,
+					   nelems, (int)direction);
+		return;
+	}
+#endif
+	BUG();
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+EXPORT_SYMBOL(dma_mapping_error);
+
+int dma_get_cache_alignment(void)
+{
+	return 32;
+}
+EXPORT_SYMBOL(dma_get_cache_alignment);

arch/sparc/kernel/dma.h

+void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
+void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
+dma_addr_t sbus_map_single(struct device *dev, void *va,
+			   size_t len, int direction);
+void sbus_unmap_single(struct device *dev, dma_addr_t ba,
+		       size_t n, int direction);
+int sbus_map_sg(struct device *dev, struct scatterlist *sg,
+		int n, int direction);
+void sbus_unmap_sg(struct device *dev, struct scatterlist *sg,
+		   int n, int direction);
+void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
+				  size_t size, int direction);
+void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba,
+				     size_t size, int direction);

arch/sparc/kernel/ebus.c

-/*
- * ebus.c: PCI to EBus bridge device.
- *
- * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
- *
- * Adopted for sparc by V. Roganov and G. Raiko.
- * Fixes for different platforms by Pete Zaitcev.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include <asm/system.h>
-#include <asm/page.h>
-#include <asm/pbm.h>
-#include <asm/ebus.h>
-#include <asm/io.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/bpp.h>
-
-struct linux_ebus *ebus_chain = NULL;
-
-/* We are together with pcic.c under CONFIG_PCI. */
-extern unsigned int pcic_pin_to_irq(unsigned int, const char *name);
-
-/*
- * IRQ Blacklist
- * Here we list PROMs and systems that are known to supply crap as IRQ numbers.
- */
-struct ebus_device_irq {
-	char *name;
-	unsigned int pin;
-};
-
-struct ebus_system_entry {
-	char *esname;
-	struct ebus_device_irq *ipt;
-};
-
-static struct ebus_device_irq je1_1[] = {
-	{ "8042",		 3 },
-	{ "SUNW,CS4231",	 0 },
-	{ "parallel",		 0 },
-	{ "se",			 2 },
-	{ NULL, 0 }
-};
-
-/*
- * Gleb's JE1 supplied reasonable pin numbers, but mine did not (OBP 2.32).
- * Blacklist the sucker... Note that Gleb's system will work.
- */
-static struct ebus_system_entry ebus_blacklist[] = {
-	{ "SUNW,JavaEngine1", je1_1 },
-	{ NULL, NULL }
-};
-
-static struct ebus_device_irq *ebus_blackp = NULL;
-
-/*
- */
-static inline unsigned long ebus_alloc(size_t size)
-{
-	return (unsigned long)kmalloc(size, GFP_ATOMIC);
-}
-
-/*
- */
-static int __init ebus_blacklist_irq(const char *name)
-{
-	struct ebus_device_irq *dp;
-
-	if ((dp = ebus_blackp) != NULL) {
-		for (; dp->name != NULL; dp++) {
-			if (strcmp(name, dp->name) == 0) {
-				return pcic_pin_to_irq(dp->pin, name);
-			}
-		}
-	}
-	return 0;
-}
-
-static void __init fill_ebus_child(struct device_node *dp,
-				   struct linux_ebus_child *dev)
-{
-	const int *regs;
-	const int *irqs;
-	int i, len;
-
-	dev->prom_node = dp;
-	regs = of_get_property(dp, "reg", &len);
-	if (!regs)
-		len = 0;
-	dev->num_addrs = len / sizeof(regs[0]);
-
-	for (i = 0; i < dev->num_addrs; i++) {
-		if (regs[i] >= dev->parent->num_addrs) {
-			prom_printf("UGH: property for %s was %d, need < %d\n",
-				    dev->prom_node->name, len,
-				    dev->parent->num_addrs);
-			panic(__func__);
-		}
-
-		/* XXX resource */
-		dev->resource[i].start =
-			dev->parent->resource[regs[i]].start;
-	}
-
-	for (i = 0; i < PROMINTR_MAX; i++)
-		dev->irqs[i] = PCI_IRQ_NONE;
-
-	if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) {
-		dev->num_irqs = 1;
-	} else {
-		irqs = of_get_property(dp, "interrupts", &len);
-		if (!irqs) {
-			dev->num_irqs = 0;
-			dev->irqs[0] = 0;
-			if (dev->parent->num_irqs != 0) {
-				dev->num_irqs = 1;
-				dev->irqs[0] = dev->parent->irqs[0];
-			}
-		} else {
-			dev->num_irqs = len / sizeof(irqs[0]);
-			if (irqs[0] == 0 || irqs[0] >= 8) {
-				/*
-				 * XXX Zero is a valid pin number...
-				 * This works as long as Ebus is not wired
-				 * to INTA#.
-				 */
-				printk("EBUS: %s got bad irq %d from PROM\n",
-				       dev->prom_node->name, irqs[0]);
-				dev->num_irqs = 0;
-				dev->irqs[0] = 0;
-			} else {
-				dev->irqs[0] =
-					pcic_pin_to_irq(irqs[0],
-							dev->prom_node->name);
-			}
-		}
-	}
-}
-
-static void __init fill_ebus_device(struct device_node *dp,
-				    struct linux_ebus_device *dev)
-{
-	const struct linux_prom_registers *regs;
-	struct linux_ebus_child *child;
-	struct dev_archdata *sd;
-	const int *irqs;
-	int i, n, len;
-	unsigned long baseaddr;
-
-	dev->prom_node = dp;
-
-	regs = of_get_property(dp, "reg", &len);
-	if (!regs)
-		len = 0;
-	if (len % sizeof(struct linux_prom_registers)) {
-		prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
-			    dev->prom_node->name, len,
-			    (int)sizeof(struct linux_prom_registers));
-		panic(__func__);
-	}
-	dev->num_addrs = len / sizeof(struct linux_prom_registers);
-
-	for (i = 0; i < dev->num_addrs; i++) {
-		/*
-		 * XXX Collect JE-1 PROM
-		 * 
-		 * Example - JS-E with 3.11:
-		 *  /ebus
-		 *      regs 
-		 *        0x00000000, 0x0, 0x00000000, 0x0, 0x00000000,
-		 *        0x82000010, 0x0, 0xf0000000, 0x0, 0x01000000,
-		 *        0x82000014, 0x0, 0x38800000, 0x0, 0x00800000,
-		 *      ranges
-		 *        0x00, 0x00000000, 0x02000010, 0x0, 0x0, 0x01000000,
-		 *        0x01, 0x01000000, 0x02000014, 0x0, 0x0, 0x00800000,
-		 *  /ebus/8042
-		 *      regs
-		 *        0x00000001, 0x00300060, 0x00000008,
-		 *        0x00000001, 0x00300060, 0x00000008,
-		 */
-		n = regs[i].which_io;
-		if (n >= 4) {
-			/* XXX This is copied from old JE-1 by Gleb. */
-			n = (regs[i].which_io - 0x10) >> 2;
-		} else {
-			;
-		}
-
-/*
- * XXX Now as we have regions, why don't we make an on-demand allocation...
- */
-		dev->resource[i].start = 0;
-		if ((baseaddr = dev->bus->self->resource[n].start +
-		    regs[i].phys_addr) != 0) {
-			/* dev->resource[i].name = dev->prom_name; */
-			if ((baseaddr = (unsigned long) ioremap(baseaddr,
-			    regs[i].reg_size)) == 0) {
-				panic("ebus: unable to remap dev %s",
-				      dev->prom_node->name);
-			}
-		}
-		dev->resource[i].start = baseaddr;	/* XXX Unaligned */
-	}
-
-	for (i = 0; i < PROMINTR_MAX; i++)
-		dev->irqs[i] = PCI_IRQ_NONE;
-
-	if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) {
-		dev->num_irqs = 1;
-	} else {
-		irqs = of_get_property(dp, "interrupts", &len);
-		if (!irqs) {
-			dev->num_irqs = 0;
-			if ((dev->irqs[0] = dev->bus->self->irq) != 0) {
-				dev->num_irqs = 1;
-/* P3 */ /* printk("EBUS: child %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */
-			}
-		} else {
-			dev->num_irqs = 1;  /* dev->num_irqs = len / sizeof(irqs[0]); */
-			if (irqs[0] == 0 || irqs[0] >= 8) {
-				/* See above for the parent. XXX */
-				printk("EBUS: %s got bad irq %d from PROM\n",
-				       dev->prom_node->name, irqs[0]);
-				dev->num_irqs = 0;
-				dev->irqs[0] = 0;
-			} else {
-				dev->irqs[0] =
-					pcic_pin_to_irq(irqs[0],
-							dev->prom_node->name);
-			}
-		}
-	}
-
-	sd = &dev->ofdev.dev.archdata;
-	sd->prom_node = dp;
-	sd->op = &dev->ofdev;
-	sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu;
-
-	dev->ofdev.node = dp;
-	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
-	dev->ofdev.dev.bus = &ebus_bus_type;
-	sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node);
-
-	/* Register with core */
-	if (of_device_register(&dev->ofdev) != 0)
-		printk(KERN_DEBUG "ebus: device registration error for %s!\n",
-		       dp->path_component_name);
-
-	if ((dp = dp->child) != NULL) {
-		dev->children = (struct linux_ebus_child *)
-			ebus_alloc(sizeof(struct linux_ebus_child));
-
-		child = dev->children;
-		child->next = NULL;
-		child->parent = dev;
-		child->bus = dev->bus;
-		fill_ebus_child(dp, child);
-
-		while ((dp = dp->sibling) != NULL) {
-			child->next = (struct linux_ebus_child *)
-				ebus_alloc(sizeof(struct linux_ebus_child));
-
-			child = child->next;
-			child->next = NULL;
-			child->parent = dev;
-			child->bus = dev->bus;
-			fill_ebus_child(dp, child);
-		}
-	}
-}
-
-void __init ebus_init(void)
-{
-	const struct linux_prom_pci_registers *regs;
-	struct linux_pbm_info *pbm;
-	struct linux_ebus_device *dev;
-	struct linux_ebus *ebus;
-	struct ebus_system_entry *sp;
-	struct pci_dev *pdev;
-	struct pcidev_cookie *cookie;
-	struct device_node *dp;
-	struct resource *p;
-	unsigned short pci_command;
-	int len, reg, nreg;
-	int num_ebus = 0;
-
-	dp = of_find_node_by_path("/");
-	for (sp = ebus_blacklist; sp->esname != NULL; sp++) {
-		if (strcmp(dp->name, sp->esname) == 0) {
-			ebus_blackp = sp->ipt;
-			break;
-		}
-	}
-
-	pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_EBUS, NULL);
-	if (!pdev)
-		return;
-
-	cookie = pdev->sysdata;
-	dp = cookie->prom_node;
-
-	ebus_chain = ebus = (struct linux_ebus *)
-			ebus_alloc(sizeof(struct linux_ebus));
-	ebus->next = NULL;
-
-	while (dp) {
-		struct device_node *nd;
-
-		ebus->prom_node = dp;
-		ebus->self = pdev;
-		ebus->parent = pbm = cookie->pbm;
-
-		/* Enable BUS Master. */
-		pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-		pci_command |= PCI_COMMAND_MASTER;
-		pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-
-		regs = of_get_property(dp, "reg", &len);
-		if (!regs) {
-			prom_printf("%s: can't find reg property\n",
-				    __func__);
-			prom_halt();
-		}
-		nreg = len / sizeof(struct linux_prom_pci_registers);
-
-		p = &ebus->self->resource[0];
-		for (reg = 0; reg < nreg; reg++) {
-			if (!(regs[reg].which_io & 0x03000000))
-				continue;
-
-			(p++)->start = regs[reg].phys_lo;
-		}
-
-		ebus->ofdev.node = dp;
-		ebus->ofdev.dev.parent = &pdev->dev;
-		ebus->ofdev.dev.bus = &ebus_bus_type;
-		sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus);
-
-		/* Register with core */
-		if (of_device_register(&ebus->ofdev) != 0)
-			printk(KERN_DEBUG "ebus: device registration error for %s!\n",
-			       dp->path_component_name);
-
-
-		nd = dp->child;
-		if (!nd)
-			goto next_ebus;
-
-		ebus->devices = (struct linux_ebus_device *)
-				ebus_alloc(sizeof(struct linux_ebus_device));
-
-		dev = ebus->devices;
-		dev->next = NULL;
-		dev->children = NULL;
-		dev->bus = ebus;
-		fill_ebus_device(nd, dev);
-
-		while ((nd = nd->sibling) != NULL) {
-			dev->next = (struct linux_ebus_device *)
-				ebus_alloc(sizeof(struct linux_ebus_device));
-
-			dev = dev->next;
-			dev->next = NULL;
-			dev->children = NULL;
-			dev->bus = ebus;
-			fill_ebus_device(nd, dev);
-		}
-
-	next_ebus:
-		pdev = pci_get_device(PCI_VENDOR_ID_SUN,
-				       PCI_DEVICE_ID_SUN_EBUS, pdev);
-		if (!pdev)
-			break;
-
-		cookie = pdev->sysdata;
-		dp = cookie->prom_node;
-
-		ebus->next = (struct linux_ebus *)
-			ebus_alloc(sizeof(struct linux_ebus));
-		ebus = ebus->next;
-		ebus->next = NULL;
-		++num_ebus;
-	}
-	if (pdev)
-		pci_dev_put(pdev);
-}

arch/sparc/kernel/entry.S

@@ -20,11 +20,7 @@
 #include <asm/memreg.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
 #include <asm/pgtsun4c.h>
-#endif
 #include <asm/winmacro.h>
 #include <asm/signal.h>
 #include <asm/obio.h>
@@ -276,17 +272,18 @@ smp4m_ticker:
 	 */
 maybe_smp4m_msg:
 	GET_PROCESSOR4M_ID(o3)
-	set	sun4m_interrupts, %l5
-	ld	[%l5], %o5
+	sethi	%hi(sun4m_irq_percpu), %l5
+	sll	%o3, 2, %o3
+	or	%l5, %lo(sun4m_irq_percpu), %o5
 	sethi	%hi(0x40000000), %o2
-	sll	%o3, 12, %o3
 	ld	[%o5 + %o3], %o1
-	andcc	%o1, %o2, %g0
+	ld	[%o1 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
+	andcc	%o3, %o2, %g0
 	be,a	smp4m_ticker
 	 cmp	%l7, 14
-	st	%o2, [%o5 + 0x4]
+	st	%o2, [%o1 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x40000000
 	WRITE_PAUSE
-	ld	[%o5], %g0
+	ld	[%o1 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -304,16 +301,16 @@ linux_trap_ipi15_sun4m:
 	SAVE_ALL
 	sethi	%hi(0x80000000), %o2
 	GET_PROCESSOR4M_ID(o0)
-	set	sun4m_interrupts, %l5
-	ld	[%l5], %o5
-	sll	%o0, 12, %o0
-	add	%o5, %o0, %o5
-	ld	[%o5], %o3
+	sethi	%hi(sun4m_irq_percpu), %l5
+	or	%l5, %lo(sun4m_irq_percpu), %o5
+	sll	%o0, 2, %o0
+	ld	[%o5 + %o0], %o5
+	ld	[%o5 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
 	andcc	%o3, %o2, %g0
 	be	1f			! Must be an NMI async memory error
-	 st	%o2, [%o5 + 4]
+	 st	%o2, [%o5 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x80000000
 	WRITE_PAUSE
-	ld	[%o5], %g0
+	ld	[%o5 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -327,12 +324,11 @@ linux_trap_ipi15_sun4m:
 1:
 	/* NMI async memory error handling. */
 	sethi	%hi(0x80000000), %l4
-	sethi	%hi(0x4000), %o3
-	sub	%o5, %o0, %o5
-	add	%o5, %o3, %l5
-	st	%l4, [%l5 + 0xc]
+	sethi	%hi(sun4m_irq_global), %o5
+	ld	[%o5 + %lo(sun4m_irq_global)], %l5
+	st	%l4, [%l5 + 0x0c]	! sun4m_irq_global->mask_set=0x80000000
 	WRITE_PAUSE
-	ld	[%l5], %g0
+	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -341,9 +337,9 @@ linux_trap_ipi15_sun4m:
 	WRITE_PAUSE
 	call	sun4m_nmi
 	 nop
-	st	%l4, [%l5 + 0x8]
+	st	%l4, [%l5 + 0x08]	! sun4m_irq_global->mask_clear=0x80000000
 	WRITE_PAUSE
-	ld	[%l5], %g0
+	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
 	WRITE_PAUSE
 	RESTORE_ALL
 
@@ -775,11 +771,7 @@ vac_linesize_patch_32:		subcc	%l7, 32, %l7
  * Ugly, but we cant use hardware flushing on the sun4 and we'd require
  * two instructions (Anton)
  */
-#ifdef CONFIG_SUN4
-vac_hwflush_patch1_on:		nop
-#else
 vac_hwflush_patch1_on:		addcc	%l7, -PAGE_SIZE, %l7
-#endif
 
 vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 
@@ -798,42 +790,10 @@ vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 ! %l7 = 1 for textfault
 ! We want error in %l5, vaddr in %l6
 sun4c_fault:
-#ifdef CONFIG_SUN4
-	sethi	%hi(sun4c_memerr_reg), %l4
-	ld	[%l4+%lo(sun4c_memerr_reg)], %l4  ! memerr ctrl reg addr
-	ld	[%l4], %l6		! memerr ctrl reg
-	ld	[%l4 + 4], %l5		! memerr vaddr reg
-	andcc	%l6, 0x80, %g0		! check for error type
-	st	%g0, [%l4 + 4]		! clear the error
-	be	0f			! normal error
-	 sethi	%hi(AC_BUS_ERROR), %l4	! bus err reg addr
-
-	call	prom_halt	! something weird happened
-					! what exactly did happen?
-					! what should we do here?
-
-0:	or	%l4, %lo(AC_BUS_ERROR), %l4	! bus err reg addr
-	lduba	[%l4] ASI_CONTROL, %l6	! bus err reg
-
-	cmp    %l7, 1			! text fault?
-	be	1f			! yes
-	 nop
-
-	ld     [%l1], %l4		! load instruction that caused fault
-	srl	%l4, 21, %l4
-	andcc	%l4, 1, %g0		! store instruction?
-
-	be	1f			! no
-	 sethi	%hi(SUN4C_SYNC_BADWRITE), %l4 ! yep
-					! %lo(SUN4C_SYNC_BADWRITE) = 0
-	or	%l4, %l6, %l6		! set write bit to emulate sun4c
-1:
-#else
 	sethi	%hi(AC_SYNC_ERR), %l4
 	add	%l4, 0x4, %l6			! AC_SYNC_VA in %l6
 	lda	[%l6] ASI_CONTROL, %l5		! Address
 	lda	[%l4] ASI_CONTROL, %l6		! Error, retained for a bit
-#endif
 
 	andn	%l5, 0xfff, %l5			! Encode all info into l7
 	srl	%l6, 14, %l4
@@ -880,12 +840,7 @@ sun4c_fault:
 	or      %l4, %lo(swapper_pg_dir), %l4
 	sll     %l6, 2, %l6
 	ld      [%l4 + %l6], %l4
-#ifdef CONFIG_SUN4
-	sethi	%hi(PAGE_MASK), %l6
-	andcc	%l4, %l6, %g0
-#else
 	andcc   %l4, PAGE_MASK, %g0
-#endif
 	be      sun4c_fault_fromuser
 	 lduXa  [%l5] ASI_SEGMAP, %l4
 
@@ -937,11 +892,7 @@ invalid_segment_patch1:
 	ld	[%l6 + 0x08], %l3	! tmp = entry->vaddr
 
 	! Flush segment from the cache.
-#ifdef CONFIG_SUN4
-	sethi	%hi((128 * 1024)), %l7
-#else
 	sethi	%hi((64 * 1024)), %l7
-#endif
 9:
 vac_hwflush_patch1:
 vac_linesize_patch:
@@ -1029,12 +980,7 @@ invalid_segment_patch2:
 	or	%l4, %lo(swapper_pg_dir), %l4
 	sll	%l3, 2, %l3
 	ld	[%l4 + %l3], %l4
-#ifndef CONFIG_SUN4
 	and	%l4, PAGE_MASK, %l4
-#else
-	sethi	%hi(PAGE_MASK), %l6
-	and	%l4, %l6, %l4
-#endif
 
 	srl	%l5, (PAGE_SHIFT - 2), %l6
 	and	%l6, ((SUN4C_PTRS_PER_PTE - 1) << 2), %l6

arch/sparc/kernel/head.S

@@ -63,15 +63,9 @@ cputypvar_sun4m:
 
 	.align 4
 
-#ifndef CONFIG_SUN4
 sun4_notsup:
-	.asciz	"Sparc-Linux sun4 needs a specially compiled kernel, turn CONFIG_SUN4 on.\n\n"
+	.asciz	"Sparc-Linux sun4 support does no longer exist.\n\n"
 	.align 4
-#else
-sun4cdm_notsup:
-	.asciz	"Kernel compiled with CONFIG_SUN4 cannot run on SUN4C/SUN4M/SUN4D\nTurn CONFIG_SUN4 off.\n\n"
-	.align 4
-#endif
 
 sun4e_notsup:
         .asciz  "Sparc-Linux sun4e support does not exist\n\n"
@@ -780,15 +774,6 @@ execute_in_high_mem:
 		 nop
 
 found_version:
-#ifdef CONFIG_SUN4
-/* For people who try sun4 kernels, even if Configure.help advises them. */
-		ld	[%g7 + 0x68], %o1
-		set	sun4cdm_notsup, %o0
-		call	%o1
-		 nop
-		b	halt_me
-		 nop
-#endif
 /* Get the machine type via the mysterious romvec node operations. */
 
 		add	%g7, 0x1c, %l1		
@@ -1150,15 +1135,6 @@ sun4c_continue_boot:
 		 nop
 
 sun4_init:
-#ifdef CONFIG_SUN4
-/* There, happy now Adrian? */
-		set	cputypval, %o2		! Let everyone know we
-		set	' ', %o0			! are a "sun4 " architecture
-		stb	%o0, [%o2 + 0x4]		
-
-		b got_prop 
-		 nop
-#else
 		sethi   %hi(SUN4_PROM_VECTOR+0x84), %o1
 		ld      [%o1 + %lo(SUN4_PROM_VECTOR+0x84)], %o1
 		set     sun4_notsup, %o0
@@ -1170,7 +1146,7 @@ sun4_init:
 		 nop
 1:		ba      1b                      ! Cannot exit into KMON
 		 nop
-#endif
+
 no_sun4e_here:
 		ld	[%g7 + 0x68], %o1
 		set	sun4e_notsup, %o0

arch/sparc/kernel/idprom.c

@@ -12,10 +12,6 @@
 #include <asm/oplib.h>
 #include <asm/idprom.h>
 #include <asm/machines.h>  /* Fun with Sun released architectures. */
-#ifdef CONFIG_SUN4
-#include <asm/sun4paddr.h>
-extern void sun4setup(void);
-#endif
 
 struct idprom *idprom;
 static struct idprom idprom_buffer;
@@ -101,7 +97,4 @@ void __init idprom_init(void)
 		    idprom->id_ethaddr[0], idprom->id_ethaddr[1],
 		    idprom->id_ethaddr[2], idprom->id_ethaddr[3],
 		    idprom->id_ethaddr[4], idprom->id_ethaddr[5]);
-#ifdef CONFIG_SUN4
-	sun4setup();
-#endif
 }

arch/sparc/kernel/ioport.c

@@ -42,10 +42,13 @@
 #include <asm/vaddrs.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/sbus.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/dma.h>
+#include <asm/iommu.h>
+#include <asm/io-unit.h>
+
+#include "dma.h"
 
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 
@@ -139,15 +142,6 @@ void iounmap(volatile void __iomem *virtual)
 	}
 }
 
-/*
- */
-void __iomem *sbus_ioremap(struct resource *phyres, unsigned long offset,
-    unsigned long size, char *name)
-{
-	return _sparc_alloc_io(phyres->flags & 0xF,
-	    phyres->start + offset, size, name);
-}
-
 void __iomem *of_ioremap(struct resource *res, unsigned long offset,
 			 unsigned long size, char *name)
 {
@@ -163,13 +157,6 @@ void of_iounmap(struct resource *res, void __iomem *base, unsigned long size)
 }
 EXPORT_SYMBOL(of_iounmap);
 
-/*
- */
-void sbus_iounmap(volatile void __iomem *addr, unsigned long size)
-{
-	iounmap(addr);
-}
-
 /*
  * Meat of mapping
  */
@@ -246,63 +233,19 @@ static void _sparc_free_io(struct resource *res)
 
 #ifdef CONFIG_SBUS
 
-void sbus_set_sbus64(struct sbus_dev *sdev, int x)
+void sbus_set_sbus64(struct device *dev, int x)
 {
 	printk("sbus_set_sbus64: unsupported\n");
 }
 
-extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq);
-void __init sbus_fill_device_irq(struct sbus_dev *sdev)
-{
-	struct linux_prom_irqs irqs[PROMINTR_MAX];
-	int len;
-
-	len = prom_getproperty(sdev->prom_node, "intr",
-			       (char *)irqs, sizeof(irqs));
-	if (len != -1) {
-		sdev->num_irqs = len / 8;
-		if (sdev->num_irqs == 0) {
-			sdev->irqs[0] = 0;
-		} else if (sparc_cpu_model == sun4d) {
-			for (len = 0; len < sdev->num_irqs; len++)
-				sdev->irqs[len] =
-					sun4d_build_irq(sdev, irqs[len].pri);
-		} else {
-			for (len = 0; len < sdev->num_irqs; len++)
-				sdev->irqs[len] = irqs[len].pri;
-		}
-	} else {
-		int interrupts[PROMINTR_MAX];
-
-		/* No "intr" node found-- check for "interrupts" node.
-		 * This node contains SBus interrupt levels, not IPLs
-		 * as in "intr", and no vector values.  We convert
-		 * SBus interrupt levels to PILs (platform specific).
-		 */
-		len = prom_getproperty(sdev->prom_node, "interrupts",
-				       (char *)interrupts, sizeof(interrupts));
-		if (len == -1) {
-			sdev->irqs[0] = 0;
-			sdev->num_irqs = 0;
-		} else {
-			sdev->num_irqs = len / sizeof(int);
-			for (len = 0; len < sdev->num_irqs; len++) {
-				sdev->irqs[len] =
-					sbint_to_irq(sdev, interrupts[len]);
-			}
-		}
-	} 
-}
-
 /*
  * Allocate a chunk of memory suitable for DMA.
  * Typically devices use them for control blocks.
  * CPU may access them without any explicit flushing.
- *
- * XXX Some clever people know that sdev is not used and supply NULL. Watch.
  */
-void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
+void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp)
 {
+	struct of_device *op = to_of_device(dev);
 	unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
 	unsigned long va;
 	struct resource *res;
@@ -336,13 +279,10 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
 	 * XXX That's where sdev would be used. Currently we load
 	 * all iommu tables with the same translations.
 	 */
-	if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0)
+	if (mmu_map_dma_area(dev, dma_addrp, va, res->start, len_total) != 0)
 		goto err_noiommu;
 
-	/* Set the resource name, if known. */
-	if (sdev) {
-		res->name = sdev->prom_name;
-	}
+	res->name = op->node->name;
 
 	return (void *)(unsigned long)res->start;
 
@@ -356,7 +296,7 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
 	return NULL;
 }
 
-void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
+void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
 {
 	struct resource *res;
 	struct page *pgv;
@@ -383,8 +323,8 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
 	kfree(res);
 
 	/* mmu_inval_dma_area(va, n); */ /* it's consistent, isn't it */
-	pgv = mmu_translate_dvma(ba);
-	mmu_unmap_dma_area(ba, n);
+	pgv = virt_to_page(p);
+	mmu_unmap_dma_area(dev, ba, n);
 
 	__free_pages(pgv, get_order(n));
 }
@@ -394,7 +334,7 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
  * CPU view of this memory may be inconsistent with
  * a device view and explicit flushing is necessary.
  */
-dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction)
+dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction)
 {
 	/* XXX why are some lengths signed, others unsigned? */
 	if (len <= 0) {
@@ -404,17 +344,17 @@ dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int dire
 	if (len > 256*1024) {			/* __get_free_pages() limit */
 		return 0;
 	}
-	return mmu_get_scsi_one(va, len, sdev->bus);
+	return mmu_get_scsi_one(dev, va, len);
 }
 
-void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t ba, size_t n, int direction)
+void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction)
 {
-	mmu_release_scsi_one(ba, n, sdev->bus);
+	mmu_release_scsi_one(dev, ba, n);
 }
 
-int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
 {
-	mmu_get_scsi_sgl(sg, n, sdev->bus);
+	mmu_get_scsi_sgl(dev, sg, n);
 
 	/*
 	 * XXX sparc64 can return a partial length here. sun4c should do this
@@ -423,145 +363,28 @@ int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direct
 	return n;
 }
 
-void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
-{
-	mmu_release_scsi_sgl(sg, n, sdev->bus);
-}
-
-/*
- */
-void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction)
-{
-#if 0
-	unsigned long va;
-	struct resource *res;
-
-	/* We do not need the resource, just print a message if invalid. */
-	res = _sparc_find_resource(&_sparc_dvma, ba);
-	if (res == NULL)
-		panic("sbus_dma_sync_single: 0x%x\n", ba);
-
-	va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */
-	/*
-	 * XXX This bogosity will be fixed with the iommu rewrite coming soon
-	 * to a kernel near you. - Anton
-	 */
-	/* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */
-#endif
-}
-
-void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction)
+void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
 {
-#if 0
-	unsigned long va;
-	struct resource *res;
-
-	/* We do not need the resource, just print a message if invalid. */
-	res = _sparc_find_resource(&_sparc_dvma, ba);
-	if (res == NULL)
-		panic("sbus_dma_sync_single: 0x%x\n", ba);
-
-	va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */
-	/*
-	 * XXX This bogosity will be fixed with the iommu rewrite coming soon
-	 * to a kernel near you. - Anton
-	 */
-	/* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */
-#endif
+	mmu_release_scsi_sgl(dev, sg, n);
 }
 
-void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction)
 {
-	printk("sbus_dma_sync_sg_for_cpu: not implemented yet\n");
 }
 
-void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction)
 {
-	printk("sbus_dma_sync_sg_for_device: not implemented yet\n");
-}
-
-/* Support code for sbus_init().  */
-/*
- * XXX This functions appears to be a distorted version of
- * prom_sbus_ranges_init(), with all sun4d stuff cut away.
- * Ask DaveM what is going on here, how is sun4d supposed to work... XXX
- */
-/* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */
-void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus)
-{
-	int parent_node = pn->node;
-
-	if (sparc_cpu_model == sun4d) {
-		struct linux_prom_ranges iounit_ranges[PROMREG_MAX];
-		int num_iounit_ranges, len;
-
-		len = prom_getproperty(parent_node, "ranges",
-				       (char *) iounit_ranges,
-				       sizeof (iounit_ranges));
-		if (len != -1) {
-			num_iounit_ranges =
-				(len / sizeof(struct linux_prom_ranges));
-			prom_adjust_ranges(sbus->sbus_ranges,
-					   sbus->num_sbus_ranges,
-					   iounit_ranges, num_iounit_ranges);
-		}
-	}
 }
 
-void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp)
-{
-#ifndef CONFIG_SUN4
-	struct device_node *parent = dp->parent;
-
-	if (sparc_cpu_model != sun4d &&
-	    parent != NULL &&
-	    !strcmp(parent->name, "iommu")) {
-		extern void iommu_init(int iommu_node, struct sbus_bus *sbus);
-
-		iommu_init(parent->node, sbus);
-	}
-
-	if (sparc_cpu_model == sun4d) {
-		extern void iounit_init(int sbi_node, int iounit_node,
-					struct sbus_bus *sbus);
-
-		iounit_init(dp->node, parent->node, sbus);
-	}
-#endif
-}
-
-void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
-{
-	if (sparc_cpu_model == sun4d) {
-		struct device_node *parent = dp->parent;
-
-		sbus->devid = of_getintprop_default(parent, "device-id", 0);
-		sbus->board = of_getintprop_default(parent, "board#", 0);
-	}
-}
-
-int __init sbus_arch_preinit(void)
+static int __init sparc_register_ioport(void)
 {
 	register_proc_sparc_ioport();
 
-#ifdef CONFIG_SUN4
-	{
-		extern void sun4_dvma_init(void);
-		sun4_dvma_init();
-	}
-	return 1;
-#else
 	return 0;
-#endif
 }
 
-void __init sbus_arch_postinit(void)
-{
-	if (sparc_cpu_model == sun4d) {
-		extern void sun4d_init_sbi_irq(void);
-		sun4d_init_sbi_irq();
-	}
-}
+arch_initcall(sparc_register_ioport);
+
 #endif /* CONFIG_SBUS */
 
 #ifdef CONFIG_PCI

arch/sparc/kernel/irq.h

@@ -13,7 +13,6 @@ BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
 BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
 BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
 BTFIXUPDEF_CALL(void, clear_clock_irq, void)
-BTFIXUPDEF_CALL(void, clear_profile_irq, int)
 BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
 
 static inline void __disable_irq(unsigned int irq)
@@ -41,11 +40,6 @@ static inline void clear_clock_irq(void)
 	BTFIXUP_CALL(clear_clock_irq)();
 }
 
-static inline void clear_profile_irq(int irq)
-{
-	BTFIXUP_CALL(clear_profile_irq)(irq);
-}
-
 static inline void load_profile_irq(int cpu, int limit)
 {
 	BTFIXUP_CALL(load_profile_irq)(cpu, limit);

arch/sparc/kernel/of_device.c

@@ -29,15 +29,38 @@ struct of_device *of_find_device_by_node(struct device_node *dp)
 }
 EXPORT_SYMBOL(of_find_device_by_node);
 
-#ifdef CONFIG_PCI
-struct bus_type ebus_bus_type;
-EXPORT_SYMBOL(ebus_bus_type);
-#endif
+unsigned int irq_of_parse_and_map(struct device_node *node, int index)
+{
+	struct of_device *op = of_find_device_by_node(node);
+
+	if (!op || index >= op->num_irqs)
+		return 0;
+
+	return op->irqs[index];
+}
+EXPORT_SYMBOL(irq_of_parse_and_map);
+
+/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
+ * BUS and propagate to all child of_device objects.
+ */
+void of_propagate_archdata(struct of_device *bus)
+{
+	struct dev_archdata *bus_sd = &bus->dev.archdata;
+	struct device_node *bus_dp = bus->node;
+	struct device_node *dp;
+
+	for (dp = bus_dp->child; dp; dp = dp->sibling) {
+		struct of_device *op = of_find_device_by_node(dp);
 
-#ifdef CONFIG_SBUS
-struct bus_type sbus_bus_type;
-EXPORT_SYMBOL(sbus_bus_type);
-#endif
+		op->dev.archdata.iommu = bus_sd->iommu;
+		op->dev.archdata.stc = bus_sd->stc;
+		op->dev.archdata.host_controller = bus_sd->host_controller;
+		op->dev.archdata.numa_node = bus_sd->numa_node;
+
+		if (dp->child)
+			of_propagate_archdata(op);
+	}
+}
 
 struct bus_type of_platform_bus_type;
 EXPORT_SYMBOL(of_platform_bus_type);
@@ -327,6 +350,27 @@ static int __init build_one_resource(struct device_node *parent,
 	return 1;
 }
 
+static int __init use_1to1_mapping(struct device_node *pp)
+{
+	/* If we have a ranges property in the parent, use it.  */
+	if (of_find_property(pp, "ranges", NULL) != NULL)
+		return 0;
+
+	/* Some SBUS devices use intermediate nodes to express
+	 * hierarchy within the device itself.  These aren't
+	 * real bus nodes, and don't have a 'ranges' property.
+	 * But, we should still pass the translation work up
+	 * to the SBUS itself.
+	 */
+	if (!strcmp(pp->name, "dma") ||
+	    !strcmp(pp->name, "espdma") ||
+	    !strcmp(pp->name, "ledma") ||
+	    !strcmp(pp->name, "lebuffer"))
+		return 0;
+
+	return 1;
+}
+
 static int of_resource_verbose;
 
 static void __init build_device_resources(struct of_device *op,
@@ -373,10 +417,7 @@ static void __init build_device_resources(struct of_device *op,
 
 		flags = bus->get_flags(reg, 0);
 
-		/* If the immediate parent has no ranges property to apply,
-		 * just use a 1<->1 mapping.
-		 */
-		if (of_find_property(pp, "ranges", NULL) == NULL) {
+		if (use_1to1_mapping(pp)) {
 			result = of_read_addr(addr, na);
 			goto build_res;
 		}
@@ -565,15 +606,6 @@ static int __init of_bus_driver_init(void)
 	int err;
 
 	err = of_bus_type_init(&of_platform_bus_type, "of");
-#ifdef CONFIG_PCI
-	if (!err)
-		err = of_bus_type_init(&ebus_bus_type, "ebus");
-#endif
-#ifdef CONFIG_SBUS
-	if (!err)
-		err = of_bus_type_init(&sbus_bus_type, "sbus");
-#endif
-
 	if (!err)
 		scan_of_devices();
 

arch/sparc/kernel/pcic.c

@@ -17,8 +17,6 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 
-#include <asm/ebus.h>
-#include <asm/sbus.h> /* for sanity check... */
 #include <asm/swift.h> /* for cache flushing. */
 #include <asm/io.h>
 
@@ -430,7 +428,6 @@ static int __init pcic_init(void)
 
 	pcic_pbm_scan_bus(pcic);
 
-	ebus_init();
 	return 0;
 }
 
@@ -493,10 +490,6 @@ static void pcic_map_pci_device(struct linux_pcic *pcic,
 				 * do ioremap() before accessing PC-style I/O,
 				 * we supply virtual, ready to access address.
 				 *
-				 * Ebus devices do not come here even if
-				 * CheerIO makes a similar conversion.
-				 * See ebus.c for details.
-				 *
 				 * Note that request_region()
 				 * works for these devices.
 				 *
@@ -677,7 +670,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 }
 
 /*
- * pcic_pin_to_irq() is exported to ebus.c.
+ * pcic_pin_to_irq() is exported to bus probing code
  */
 unsigned int
 pcic_pin_to_irq(unsigned int pin, const char *name)
@@ -904,11 +897,6 @@ static void pcic_enable_irq(unsigned int irq_nr)
 	local_irq_restore(flags);
 }
 
-static void pcic_clear_profile_irq(int cpu)
-{
-	printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
-}
-
 static void pcic_load_profile_irq(int cpu, unsigned int limit)
 {
 	printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
@@ -934,7 +922,6 @@ void __init sun4m_pci_init_IRQ(void)
 	BTFIXUPSET_CALL(enable_pil_irq, pcic_enable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_pil_irq, pcic_disable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM);
 }
 

arch/sparc/kernel/pmc.c

@@ -8,11 +8,11 @@
 #include <linux/fs.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/miscdevice.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/oplib.h>
 #include <asm/uaccess.h>
 #include <asm/auxio.h>
@@ -23,17 +23,15 @@
  * #define PMC_NO_IDLE
  */
 
-#define PMC_MINOR	MISC_DYNAMIC_MINOR
 #define PMC_OBPNAME	"SUNW,pmc"
 #define PMC_DEVNAME "pmc"
 
 #define PMC_IDLE_REG	0x00
 #define PMC_IDLE_ON		0x01
 
-volatile static u8 __iomem *regs; 
-static int pmc_regsize;
+static u8 __iomem *regs;
 
-#define pmc_readb(offs)			(sbus_readb(regs+offs))
+#define pmc_readb(offs)		(sbus_readb(regs+offs))
 #define pmc_writeb(val, offs) 	(sbus_writeb(val, regs+offs))
 
 /* 
@@ -53,31 +51,11 @@ void pmc_swift_idle(void)
 #endif
 } 
 
-static inline void pmc_free(void)
+static int __devinit pmc_probe(struct of_device *op,
+			       const struct of_device_id *match)
 {
-	sbus_iounmap(regs, pmc_regsize);
-}
-
-static int __init pmc_probe(void)
-{
-	struct sbus_bus *sbus = NULL;
-	struct sbus_dev *sdev = NULL;
-	for_each_sbus(sbus) {
-		for_each_sbusdev(sdev, sbus) {
-			if (!strcmp(sdev->prom_name, PMC_OBPNAME)) {
-				goto sbus_done;
-			}
-		}
-	}
-
-sbus_done:
-	if (!sdev) {
-		return -ENODEV;
-	}
-
-	pmc_regsize = sdev->reg_addrs[0].reg_size;
-	regs = sbus_ioremap(&sdev->resource[0], 0, 
-				   pmc_regsize, PMC_OBPNAME);
+	regs = of_ioremap(&op->resource[0], 0,
+			  resource_size(&op->resource[0]), PMC_OBPNAME);
 	if (!regs) {
 		printk(KERN_ERR "%s: unable to map registers\n", PMC_DEVNAME);
 		return -ENODEV;
@@ -92,8 +70,27 @@ static int __init pmc_probe(void)
 	return 0;
 }
 
+static struct of_device_id __initdata pmc_match[] = {
+	{
+		.name = PMC_OBPNAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, pmc_match);
+
+static struct of_platform_driver pmc_driver = {
+	.name		= "pmc",
+	.match_table	= pmc_match,
+	.probe		= pmc_probe,
+};
+
+static int __init pmc_init(void)
+{
+	return of_register_driver(&pmc_driver, &of_bus_type);
+}
+
 /* This driver is not critical to the boot process
  * and is easiest to ioremap when SBus is already
  * initialized, so we install ourselves thusly:
  */
-__initcall(pmc_probe);
+__initcall(pmc_init);

arch/sparc/kernel/process.c

@@ -75,7 +75,7 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	for (;;) {
-		if (ARCH_SUN4C_SUN4) {
+		if (ARCH_SUN4C) {
 			static int count = HZ;
 			static unsigned long last_jiffies;
 			static unsigned long last_faults;

arch/sparc/kernel/prom.c

@@ -54,6 +54,9 @@ int of_getintprop_default(struct device_node *np, const char *name, int def)
 }
 EXPORT_SYMBOL(of_getintprop_default);
 
+DEFINE_MUTEX(of_set_property_mutex);
+EXPORT_SYMBOL(of_set_property_mutex);
+
 int of_set_property(struct device_node *dp, const char *name, void *val, int len)
 {
 	struct property **prevp;
@@ -77,7 +80,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 			void *old_val = prop->value;
 			int ret;
 
+			mutex_lock(&of_set_property_mutex);
 			ret = prom_setprop(dp->node, (char *) name, val, len);
+			mutex_unlock(&of_set_property_mutex);
+
 			err = -EINVAL;
 			if (ret >= 0) {
 				prop->value = new_val;
@@ -436,7 +442,6 @@ static void __init of_console_init(void)
 
 	switch (prom_vers) {
 	case PROM_V0:
-	case PROM_SUN4:
 		skip = 0;
 		switch (*romvec->pv_stdout) {
 		case PROMDEV_SCREEN:

arch/sparc/kernel/setup.c

@@ -213,23 +213,25 @@ void __init setup_arch(char **cmdline_p)
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
 	strcpy(boot_command_line, *cmdline_p);
+	parse_early_param();
 
 	/* Set sparc_cpu_model */
 	sparc_cpu_model = sun_unknown;
-	if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; }
-	if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; }
-	if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; }
-	if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; }  /* CP-1200 with PROM 2.30 -E */
-	if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; }
-	if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; }
-	if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; }
-
-#ifdef CONFIG_SUN4
-	if (sparc_cpu_model != sun4) {
-		prom_printf("This kernel is for Sun4 architecture only.\n");
-		prom_halt();
-	}
-#endif
+	if (!strcmp(&cputypval,"sun4 "))
+		sparc_cpu_model = sun4;
+	if (!strcmp(&cputypval,"sun4c"))
+		sparc_cpu_model = sun4c;
+	if (!strcmp(&cputypval,"sun4m"))
+		sparc_cpu_model = sun4m;
+	if (!strcmp(&cputypval,"sun4s"))
+		sparc_cpu_model = sun4m; /* CP-1200 with PROM 2.30 -E */
+	if (!strcmp(&cputypval,"sun4d"))
+		sparc_cpu_model = sun4d;
+	if (!strcmp(&cputypval,"sun4e"))
+		sparc_cpu_model = sun4e;
+	if (!strcmp(&cputypval,"sun4u"))
+		sparc_cpu_model = sun4u;
+
 	printk("ARCH: ");
 	switch(sparc_cpu_model) {
 	case sun4:
@@ -263,7 +265,7 @@ void __init setup_arch(char **cmdline_p)
 	boot_flags_init(*cmdline_p);
 
 	idprom_init();
-	if (ARCH_SUN4C_SUN4)
+	if (ARCH_SUN4C)
 		sun4c_probe_vac();
 	load_mmu();
 

arch/sparc/kernel/sparc_ksyms.c

@@ -38,17 +38,12 @@
 #include <asm/idprom.h>
 #include <asm/head.h>
 #include <asm/smp.h>
-#include <asm/mostek.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
 #ifdef CONFIG_SBUS
-#include <asm/sbus.h>
 #include <asm/dma.h>
 #endif
-#ifdef CONFIG_PCI
-#include <asm/ebus.h>
-#endif
 #include <asm/io-unit.h>
 #include <asm/bug.h>
 
@@ -127,16 +122,11 @@ EXPORT_SYMBOL(phys_cpu_present_map);
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
 EXPORT_SYMBOL(rtc_lock);
-EXPORT_SYMBOL(mostek_lock);
-EXPORT_SYMBOL(mstk48t02_regs);
 #ifdef CONFIG_SUN_AUXIO
 EXPORT_SYMBOL(set_auxio);
 EXPORT_SYMBOL(get_auxio);
 #endif
 EXPORT_SYMBOL(io_remap_pfn_range);
-  /* P3: iounit_xxx may be needed, sun4d users */
-/* EXPORT_SYMBOL(iounit_map_dma_init); */
-/* EXPORT_SYMBOL(iounit_map_dma_page); */
 
 #ifndef CONFIG_SMP
 EXPORT_SYMBOL(BTFIXUP_CALL(___xchg32));
@@ -153,24 +143,9 @@ EXPORT_SYMBOL(BTFIXUP_CALL(mmu_release_scsi_one));
 EXPORT_SYMBOL(BTFIXUP_CALL(pgprot_noncached));
 
 #ifdef CONFIG_SBUS
-EXPORT_SYMBOL(sbus_root);
-EXPORT_SYMBOL(dma_chain);
 EXPORT_SYMBOL(sbus_set_sbus64);
-EXPORT_SYMBOL(sbus_alloc_consistent);
-EXPORT_SYMBOL(sbus_free_consistent);
-EXPORT_SYMBOL(sbus_map_single);
-EXPORT_SYMBOL(sbus_unmap_single);
-EXPORT_SYMBOL(sbus_map_sg);
-EXPORT_SYMBOL(sbus_unmap_sg);
-EXPORT_SYMBOL(sbus_dma_sync_single_for_cpu);
-EXPORT_SYMBOL(sbus_dma_sync_single_for_device);
-EXPORT_SYMBOL(sbus_dma_sync_sg_for_cpu);
-EXPORT_SYMBOL(sbus_dma_sync_sg_for_device);
-EXPORT_SYMBOL(sbus_iounmap);
-EXPORT_SYMBOL(sbus_ioremap);
 #endif
 #ifdef CONFIG_PCI
-EXPORT_SYMBOL(ebus_chain);
 EXPORT_SYMBOL(insb);
 EXPORT_SYMBOL(outsb);
 EXPORT_SYMBOL(insw);

arch/sparc/kernel/sun4d_smp.c

@@ -30,7 +30,6 @@
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/oplib.h>
-#include <asm/sbus.h>
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
@@ -72,6 +71,17 @@ static void smp_setup_percpu_timer(void);
 extern void cpu_probe(void);
 extern void sun4d_distribute_irqs(void);
 
+static unsigned char cpu_leds[32];
+
+static inline void show_leds(int cpuid)
+{
+	cpuid &= 0x1e;
+	__asm__ __volatile__ ("stba %0, [%1] %2" : :
+			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
+			      "i" (ASI_M_CTL));
+}
+
 void __init smp4d_callin(void)
 {
 	int cpuid = hard_smp4d_processor_id();

arch/sparc/kernel/sun4m_smp.c

@@ -315,6 +315,8 @@ void smp4m_cross_call_irq(void)
 	ccall_info.processors_out[i] = 1;
 }
 
+extern void sun4m_clear_profile_irq(int cpu);
+
 void smp4m_percpu_timer_interrupt(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
@@ -322,7 +324,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs)
 
 	old_regs = set_irq_regs(regs);
 
-	clear_profile_irq(cpu);
+	sun4m_clear_profile_irq(cpu);
 
 	profile_tick(CPU_PROFILING);
 

arch/sparc/kernel/traps.c

@@ -43,23 +43,6 @@ void syscall_trace_exit(struct pt_regs *regs)
 {
 }
 
-void sun4m_nmi(struct pt_regs *regs)
-{
-	unsigned long afsr, afar;
-
-	printk("Aieee: sun4m NMI received!\n");
-	/* XXX HyperSparc hack XXX */
-	__asm__ __volatile__("mov 0x500, %%g1\n\t"
-			     "lda [%%g1] 0x4, %0\n\t"
-			     "mov 0x600, %%g1\n\t"
-			     "lda [%%g1] 0x4, %1\n\t" :
-			     "=r" (afsr), "=r" (afar));
-	printk("afsr=%08lx afar=%08lx\n", afsr, afar);
-	printk("you lose buddy boy...\n");
-	show_regs(regs);
-	prom_halt();
-}
-
 void sun4d_nmi(struct pt_regs *regs)
 {
 	printk("Aieee: sun4d NMI received!\n");