Skip to content

L
linux
Commit 072ef40e authored by Paul Mackerras's avatar Paul Mackerras
Browse files
Options

Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge

parents 2b46b567 bebfa06c
Hide whitespace changes
Inline Side-by-side
Showing with 254 additions and 60 deletions
Documentation/powerpc/booting-without-of.txt
View file @ 072ef40e
......@@ -1645,8 +1645,9 @@ platforms are moved over to use the flattened-device-tree model.
MAC addresses passed by the firmware when no information other
than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "tbi",
or "rtbi".
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
"tbi", or "rtbi".
Example:
ucc@2000 {
......
arch/powerpc/boot/dts/mpc832x_mds.dts
View file @ 072ef40e
......@@ -104,7 +104,7 @@ ipic: pic@700 {
reg = <700 100>;
device_type = "ipic";
};
par_io@1400 {
reg = <1400 100>;
device_type = "par_io";
......@@ -117,7 +117,6 @@ pio3: ucc_pin@03 {
3 5 1 0 2 0 /* MDC */
0 d 2 0 1 0 /* RX_CLK (CLK9) */
3 18 2 0 1 0 /* TX_CLK (CLK10) */
1 1 1 0 1 0 /* TxD1 */
1 0 1 0 1 0 /* TxD0 */
1 1 1 0 1 0 /* TxD1 */
1 2 1 0 1 0 /* TxD2 */
......@@ -165,11 +164,11 @@ qe@e0100000 {
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <BCD3D80>;
muram@10000 {
device_type = "muram";
ranges = <0 00010000 00004000>;
data-only@0 {
reg = <0 4000>;
};
......@@ -228,7 +227,7 @@ ucc@3200 {
compatible = "ucc_geth";
model = "UCC";
device-id = <4>;
reg = <3000 200>;
reg = <3200 200>;
interrupts = <23>;
interrupt-parent = < &qeic >;
/*
......
arch/powerpc/boot/dts/mpc8544ds.dts
View file @ 072ef40e
......@@ -272,24 +272,24 @@ pcie@e000b000 {
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1b 2>;
interrupt-map-mask = <fb00 0 0 0>;
interrupt-map-mask = <ff00 0 0 1>;
interrupt-map = <
// IDSEL 0x1c USB
e000 0 0 0 &i8259 c 2
e100 0 0 0 &i8259 9 2
e200 0 0 0 &i8259 a 2
e300 0 0 0 &i8259 b 2
e000 0 0 1 &i8259 c 2
e100 0 0 1 &i8259 9 2
e200 0 0 1 &i8259 a 2
e300 0 0 1 &i8259 b 2
// IDSEL 0x1d Audio
e800 0 0 0 &i8259 6 2
e800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
f000 0 0 0 &i8259 7 2
f100 0 0 0 &i8259 7 2
f000 0 0 1 &i8259 7 2
f100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
f800 0 0 0 &i8259 e 2
f900 0 0 0 &i8259 5 2
f800 0 0 1 &i8259 e 2
f900 0 0 1 &i8259 5 2
>;
pcie@0 {
......
arch/powerpc/boot/dts/mpc8572ds.dts
View file @ 072ef40e
......@@ -219,36 +219,120 @@ pcie@ffe08000 {
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
interrupt-map-mask = <fb00 0 0 0>;
interrupt-map-mask = <ff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 - PCI slot 1 */
/* IDSEL 0x11 func 0 - PCI slot 1 */
8800 0 0 1 &mpic 2 1
8800 0 0 2 &mpic 3 1
8800 0 0 3 &mpic 4 1
8800 0 0 4 &mpic 1 1
/* IDSEL 0x12 - PCI slot 2 */
/* IDSEL 0x11 func 1 - PCI slot 1 */
8900 0 0 1 &mpic 2 1
8900 0 0 2 &mpic 3 1
8900 0 0 3 &mpic 4 1
8900 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 2 - PCI slot 1 */
8a00 0 0 1 &mpic 2 1
8a00 0 0 2 &mpic 3 1
8a00 0 0 3 &mpic 4 1
8a00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 3 - PCI slot 1 */
8b00 0 0 1 &mpic 2 1
8b00 0 0 2 &mpic 3 1
8b00 0 0 3 &mpic 4 1
8b00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 4 - PCI slot 1 */
8c00 0 0 1 &mpic 2 1
8c00 0 0 2 &mpic 3 1
8c00 0 0 3 &mpic 4 1
8c00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 5 - PCI slot 1 */
8d00 0 0 1 &mpic 2 1
8d00 0 0 2 &mpic 3 1
8d00 0 0 3 &mpic 4 1
8d00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 6 - PCI slot 1 */
8e00 0 0 1 &mpic 2 1
8e00 0 0 2 &mpic 3 1
8e00 0 0 3 &mpic 4 1
8e00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 7 - PCI slot 1 */
8f00 0 0 1 &mpic 2 1
8f00 0 0 2 &mpic 3 1
8f00 0 0 3 &mpic 4 1
8f00 0 0 4 &mpic 1 1
/* IDSEL 0x12 func 0 - PCI slot 2 */
9000 0 0 1 &mpic 3 1
9000 0 0 2 &mpic 4 1
9000 0 0 3 &mpic 1 1
9000 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 1 - PCI slot 2 */
9100 0 0 1 &mpic 3 1
9100 0 0 2 &mpic 4 1
9100 0 0 3 &mpic 1 1
9100 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 2 - PCI slot 2 */
9200 0 0 1 &mpic 3 1
9200 0 0 2 &mpic 4 1
9200 0 0 3 &mpic 1 1
9200 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 3 - PCI slot 2 */
9300 0 0 1 &mpic 3 1
9300 0 0 2 &mpic 4 1
9300 0 0 3 &mpic 1 1
9300 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 4 - PCI slot 2 */
9400 0 0 1 &mpic 3 1
9400 0 0 2 &mpic 4 1
9400 0 0 3 &mpic 1 1
9400 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 5 - PCI slot 2 */
9500 0 0 1 &mpic 3 1
9500 0 0 2 &mpic 4 1
9500 0 0 3 &mpic 1 1
9500 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 6 - PCI slot 2 */
9600 0 0 1 &mpic 3 1
9600 0 0 2 &mpic 4 1
9600 0 0 3 &mpic 1 1
9600 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 7 - PCI slot 2 */
9700 0 0 1 &mpic 3 1
9700 0 0 2 &mpic 4 1
9700 0 0 3 &mpic 1 1
9700 0 0 4 &mpic 2 1
// IDSEL 0x1c USB
e000 0 0 0 &i8259 c 2
e100 0 0 0 &i8259 9 2
e200 0 0 0 &i8259 a 2
e300 0 0 0 &i8259 b 2
e000 0 0 1 &i8259 c 2
e100 0 0 1 &i8259 9 2
e200 0 0 1 &i8259 a 2
e300 0 0 1 &i8259 b 2
// IDSEL 0x1d Audio
e800 0 0 0 &i8259 6 2
e800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
f000 0 0 0 &i8259 7 2
f100 0 0 0 &i8259 7 2
f000 0 0 1 &i8259 7 2
f100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
f800 0 0 0 &i8259 e 2
f900 0 0 0 &i8259 5 2
f800 0 0 1 &i8259 e 2
f900 0 0 1 &i8259 5 2
>;
......
arch/powerpc/boot/dts/mpc8641_hpcn.dts
View file @ 072ef40e
......@@ -235,36 +235,120 @@ pcie@f8008000 {
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
interrupt-map-mask = <fb00 0 0 0>;
interrupt-map-mask = <ff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &i8259 9 2
8800 0 0 2 &i8259 a 2
8800 0 0 3 &i8259 b 2
8800 0 0 4 &i8259 c 2
/* IDSEL 0x12 */
9000 0 0 1 &i8259 a 2
9000 0 0 2 &i8259 b 2
9000 0 0 3 &i8259 c 2
9000 0 0 4 &i8259 9 2
/* IDSEL 0x11 func 0 - PCI slot 1 */
8800 0 0 1 &mpic 2 1
8800 0 0 2 &mpic 3 1
8800 0 0 3 &mpic 4 1
8800 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 1 - PCI slot 1 */
8900 0 0 1 &mpic 2 1
8900 0 0 2 &mpic 3 1
8900 0 0 3 &mpic 4 1
8900 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 2 - PCI slot 1 */
8a00 0 0 1 &mpic 2 1
8a00 0 0 2 &mpic 3 1
8a00 0 0 3 &mpic 4 1
8a00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 3 - PCI slot 1 */
8b00 0 0 1 &mpic 2 1
8b00 0 0 2 &mpic 3 1
8b00 0 0 3 &mpic 4 1
8b00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 4 - PCI slot 1 */
8c00 0 0 1 &mpic 2 1
8c00 0 0 2 &mpic 3 1
8c00 0 0 3 &mpic 4 1
8c00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 5 - PCI slot 1 */
8d00 0 0 1 &mpic 2 1
8d00 0 0 2 &mpic 3 1
8d00 0 0 3 &mpic 4 1
8d00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 6 - PCI slot 1 */
8e00 0 0 1 &mpic 2 1
8e00 0 0 2 &mpic 3 1
8e00 0 0 3 &mpic 4 1
8e00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 7 - PCI slot 1 */
8f00 0 0 1 &mpic 2 1
8f00 0 0 2 &mpic 3 1
8f00 0 0 3 &mpic 4 1
8f00 0 0 4 &mpic 1 1
/* IDSEL 0x12 func 0 - PCI slot 2 */
9000 0 0 1 &mpic 3 1
9000 0 0 2 &mpic 4 1
9000 0 0 3 &mpic 1 1
9000 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 1 - PCI slot 2 */
9100 0 0 1 &mpic 3 1
9100 0 0 2 &mpic 4 1
9100 0 0 3 &mpic 1 1
9100 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 2 - PCI slot 2 */
9200 0 0 1 &mpic 3 1
9200 0 0 2 &mpic 4 1
9200 0 0 3 &mpic 1 1
9200 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 3 - PCI slot 2 */
9300 0 0 1 &mpic 3 1
9300 0 0 2 &mpic 4 1
9300 0 0 3 &mpic 1 1
9300 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 4 - PCI slot 2 */
9400 0 0 1 &mpic 3 1
9400 0 0 2 &mpic 4 1
9400 0 0 3 &mpic 1 1
9400 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 5 - PCI slot 2 */
9500 0 0 1 &mpic 3 1
9500 0 0 2 &mpic 4 1
9500 0 0 3 &mpic 1 1
9500 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 6 - PCI slot 2 */
9600 0 0 1 &mpic 3 1
9600 0 0 2 &mpic 4 1
9600 0 0 3 &mpic 1 1
9600 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 7 - PCI slot 2 */
9700 0 0 1 &mpic 3 1
9700 0 0 2 &mpic 4 1
9700 0 0 3 &mpic 1 1
9700 0 0 4 &mpic 2 1
// IDSEL 0x1c USB
e000 0 0 0 &i8259 c 2
e100 0 0 0 &i8259 9 2
e200 0 0 0 &i8259 a 2
e300 0 0 0 &i8259 b 2
e000 0 0 1 &i8259 c 2
e100 0 0 1 &i8259 9 2
e200 0 0 1 &i8259 a 2
e300 0 0 1 &i8259 b 2
// IDSEL 0x1d Audio
e800 0 0 0 &i8259 6 2
e800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
f000 0 0 0 &i8259 7 2
f100 0 0 0 &i8259 7 2
f000 0 0 1 &i8259 7 2
f100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
f800 0 0 0 &i8259 e 2
f900 0 0 0 &i8259 5 2
f800 0 0 1 &i8259 e 2
f900 0 0 1 &i8259 5 2
>;
pcie@0 {
......
arch/powerpc/platforms/83xx/mpc832x_mds.c
View file @ 072ef40e
......@@ -90,10 +90,11 @@ static void __init mpc832x_sys_setup_arch(void)
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
/* Reset the Ethernet PHY */
bcsr_regs[9] &= ~0x20;
/* Reset the Ethernet PHYs */
#define BCSR8_FETH_RST 0x50
bcsr_regs[8] &= ~BCSR8_FETH_RST;
udelay(1000);
bcsr_regs[9] |= 0x20;
bcsr_regs[8] |= BCSR8_FETH_RST;
iounmap(bcsr_regs);
of_node_put(np);
}
......
arch/powerpc/platforms/83xx/mpc836x_mds.c
View file @ 072ef40e
......@@ -96,14 +96,39 @@ static void __init mpc836x_mds_setup_arch(void)
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
uint svid;
/* Reset the Ethernet PHY */
bcsr_regs[9] &= ~0x20;
#define BCSR9_GETHRST 0x20
clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
udelay(1000);
bcsr_regs[9] |= 0x20;
setbits8(&bcsr_regs[9], BCSR9_GETHRST);
/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
svid = mfspr(SPRN_SVR);
if (svid == 0x80480021) {
void __iomem *immap;
immap = ioremap(get_immrbase() + 0x14a8, 8);
/*
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
*/
setbits32(immap, 0x0c003000);
/*
* IMMR + 0x14AC[20:27] = 10101010
* (data delay for both UCC's)
*/
clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
iounmap(immap);
}
iounmap(bcsr_regs);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
}
......
arch/powerpc/platforms/83xx/usb.c
View file @ 072ef40e
......@@ -130,7 +130,7 @@ int mpc831x_usb_cfg(void)
out_be32(immap + MPC83XX_SCCR_OFFS, temp);
/* Configure pin mux for ULPI. There is no pin mux for UTMI */
if (!strcmp(prop, "ulpi")) {
if (prop && !strcmp(prop, "ulpi")) {
temp = in_be32(immap + MPC83XX_SICRL_OFFS);
temp &= ~MPC831X_SICRL_USB_MASK;
temp |= MPC831X_SICRL_USB_ULPI;
......@@ -153,13 +153,13 @@ int mpc831x_usb_cfg(void)
usb_regs = ioremap(res.start, res.end - res.start + 1);
/* Using on-chip PHY */
if (!strcmp(prop, "utmi_wide") ||
!strcmp(prop, "utmi")) {
if (prop && (!strcmp(prop, "utmi_wide") ||
!strcmp(prop, "utmi"))) {
/* Set UTMI_PHY_EN, REFSEL to 48MHZ */
out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ);
/* Using external UPLI PHY */
} else if (!strcmp(prop, "ulpi")) {
} else if (prop && !strcmp(prop, "ulpi")) {
/* Set PHY_CLK_SEL to ULPI */
temp = CONTROL_PHY_CLK_SEL_ULPI;
#ifdef CONFIG_USB_OTG
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7