Commit 0771c693 authored by Krzysztof Hałasa's avatar Krzysztof Hałasa

IXP42x: Use __fls() in QMgr interrupt handlers.

Signed-off-by: default avatarKrzysztof Hałasa <khc@pm.waw.pl>
parent d4c9e9fc
......@@ -52,14 +52,15 @@ void qmgr_set_irq(unsigned int queue, int src,
static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
{
int i, ret = 0;
u32 en_bitmap, src, stat;
/* ACK - it may clear any bits so don't rely on it */
__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
for (i = 0; i < HALF_QUEUES; i++) {
u32 src, stat;
if (!(qmgr_regs->irqen[0] & BIT(i)))
continue;
en_bitmap = qmgr_regs->irqen[0];
while (en_bitmap) {
i = __fls(en_bitmap); /* number of the last "low" queue */
en_bitmap &= ~BIT(i);
src = qmgr_regs->irqsrc[i >> 3];
stat = qmgr_regs->stat1[i >> 3];
if (src & 4) /* the IRQ condition is inverted */
......@@ -82,9 +83,9 @@ static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
for (i = 0; i < HALF_QUEUES; i++) {
if (!(req_bitmap & BIT(i)))
continue;
while (req_bitmap) {
i = __fls(req_bitmap); /* number of the last "high" queue */
req_bitmap &= ~BIT(i);
irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
ret = IRQ_HANDLED;
}
......@@ -95,15 +96,19 @@ static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
static irqreturn_t qmgr_irq(int irq, void *pdev)
{
int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
u32 val = __raw_readl(&qmgr_regs->irqstat[half]);
__raw_writel(val, &qmgr_regs->irqstat[half]); /* ACK */
u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
for (i = 0; i < HALF_QUEUES; i++)
if (val & (1 << i)) {
int irq = half * HALF_QUEUES + i;
irq_handlers[irq](irq_pdevs[irq]);
}
return val ? IRQ_HANDLED : 0;
if (!req_bitmap)
return 0;
__raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
while (req_bitmap) {
i = __fls(req_bitmap); /* number of the last queue */
req_bitmap &= ~BIT(i);
i += half * HALF_QUEUES;
irq_handlers[i](irq_pdevs[i]);
}
return IRQ_HANDLED;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment