Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.16:

  Core:
   - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
   - if card init at 3.3v doesn't work, try 1.8v and 1.2v too

  Drivers:
   - moxart: New driver for MOXA ART SoCs
   - rtsx_usb_sdmmc: New driver for Realtek USB card readers
   - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
   - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
   - sunxi: New driver for Allwinner sunxi SoCs
   - usdhi6rol0: New driver for Renesas SD/SDIO controller"

* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
  mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
  mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  mmc: sdhci-of-esdhc: Fixup compile error
  mmc: tegra: fix reporting of base clock frequency
  mmc: tegra: disable UHS modes
  mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
  MAINTAINERS: mmc: Add path to git tree
  mmc: dove: fix missing MACH_DOVE dependency
  mmc: sdhci: SD tuning is broken for some controllers
  mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  mmc: omap_hsmmc: split omap-dma header file
  mmc: omap_hsmmc: fix cmd23 multiblock read/write
  mmc: omap_hsmmc: use devm_ioremap_resource
  mmc: omap_hsmmc: use devm_request_threaded_irq
  mmc: omap_hsmmc: use devm_request_irq
  mmc: omap_hsmmc: use devm_clk_get
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
  mmc: omap: Use DIV_ROUND_UP instead of open coded
  ...

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -38,6 +38,8 @@ Optional properties:
 - mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
 - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
+- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
+- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"

Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt

+MOXA ART MMC Host Controller Interface
+
+  Inherits from mmc binding[1].
+
+  [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Required properties:
+
+- compatible :	Must be "moxa,moxart-mmc" or "faraday,ftsdc010"
+- reg :		Should contain registers location and length
+- interrupts :	Should contain the interrupt number
+- clocks :	Should contain phandle for the clock feeding the MMC controller
+
+Optional properties:
+
+- dmas :	Should contain two DMA channels, line request number must be 5 for
+		both channels
+- dma-names :	Must be "tx", "rx"
+
+Example:
+
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
+		reg = <0x98e00000 0x5C>;
+		interrupts = <5 0>;
+		clocks = <&clk_apb>;
+		dmas =  <&dma 5>,
+			<&dma 5>;
+		dma-names = "tx", "rx";
+	};

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -69,10 +69,6 @@ Optional properties:
 
 * supports-highspeed: Enables support for high speed cards (up to 50MHz)
 
-* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode
-
-* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode
-
 * broken-cd: as documented in mmc core bindings.
 
 * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
@@ -103,7 +99,6 @@ board specific portions as listed below.
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
 		supports-highspeed;
-		caps2-mmc-hs200-1_8v;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;

Documentation/devicetree/bindings/mmc/usdhi6rol0.txt

+* Renesas usdhi6rol0 SD/SDIO host controller
+
+Required properties:
+
+- compatible:	must be
+		"renesas,usdhi6rol0"
+- interrupts:	3 interrupts, named "card detect", "data" and "SDIO" must be
+		specified
+- clocks:	a clock binding for the IMCLK input
+
+Optional properties:
+
+- vmmc-supply:	a phandle of a regulator, supplying Vcc to the card
+- vqmmc-supply:	a phandle of a regulator, supplying VccQ to the card
+
+Additionally any standard mmc bindings from mmc.txt can be used.
+
+Example:
+
+sd0: sd@ab000000 {
+	compatible = "renesas,usdhi6rol0";
+	reg = <0xab000000 0x200>;
+	interrupts = <0 23 0x4
+		      0 24 0x4
+		      0 25 0x4>;
+	interrupt-names = "card detect", "data", "SDIO";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-power-off-card;
+	clocks = <&imclk>;
+	vmmc-supply = <&vcc_sd0>;
+	vqmmc-supply = <&vccq_sd0>;
+};

MAINTAINERS

@@ -5974,6 +5974,7 @@ M:	Chris Ball <chris@printf.net>
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-mmc@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+T:	git git://git.linaro.org/people/ulf.hansson/mmc.git
 S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
@@ -9103,7 +9104,7 @@ F:	include/linux/toshiba.h
 F:	include/uapi/linux/toshiba.h
 
 TMIO MMC DRIVER
-M:	Ian Molton <ian@mnementh.co.uk>
+M:	Ian Molton <ian.molton@codethink.co.uk>
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc*

drivers/mmc/core/bus.c

@@ -341,16 +341,17 @@ int mmc_add_card(struct mmc_card *card)
 	if (mmc_host_is_spi(card->host)) {
 		pr_info("%s: new %s%s%s card on SPI\n",
 			mmc_hostname(card->host),
-			mmc_card_highspeed(card) ? "high speed " : "",
-			mmc_card_ddr_mode(card) ? "DDR " : "",
+			mmc_card_hs(card) ? "high speed " : "",
+			mmc_card_ddr52(card) ? "DDR " : "",
 			type);
 	} else {
 		pr_info("%s: new %s%s%s%s%s card at address %04x\n",
 			mmc_hostname(card->host),
 			mmc_card_uhs(card) ? "ultra high speed " :
-			(mmc_card_highspeed(card) ? "high speed " : ""),
+			(mmc_card_hs(card) ? "high speed " : ""),
+			mmc_card_hs400(card) ? "HS400 " :
 			(mmc_card_hs200(card) ? "HS200 " : ""),
-			mmc_card_ddr_mode(card) ? "DDR " : "",
+			mmc_card_ddr52(card) ? "DDR " : "",
 			uhs_bus_speed_mode, type, card->rca);
 	}
 

drivers/mmc/core/core.c

@@ -800,6 +800,10 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
 			data->timeout_ns = limit_us * 1000;
 			data->timeout_clks = 0;
 		}
+
+		/* assign limit value if invalid */
+		if (timeout_us == 0)
+			data->timeout_ns = limit_us * 1000;
 	}
 
 	/*
@@ -1310,31 +1314,38 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
 
+#endif /* CONFIG_REGULATOR */
+
 int mmc_regulator_get_supply(struct mmc_host *mmc)
 {
 	struct device *dev = mmc_dev(mmc);
-	struct regulator *supply;
 	int ret;
 
-	supply = devm_regulator_get(dev, "vmmc");
-	mmc->supply.vmmc = supply;
+	mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
 	mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");
 
-	if (IS_ERR(supply))
-		return PTR_ERR(supply);
+	if (IS_ERR(mmc->supply.vmmc)) {
+		if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "No vmmc regulator found\n");
+	} else {
+		ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
+		if (ret > 0)
+			mmc->ocr_avail = ret;
+		else
+			dev_warn(dev, "Failed getting OCR mask: %d\n", ret);
+	}
 
-	ret = mmc_regulator_get_ocrmask(supply);
-	if (ret > 0)
-		mmc->ocr_avail = ret;
-	else
-		dev_warn(mmc_dev(mmc), "Failed getting OCR mask: %d\n", ret);
+	if (IS_ERR(mmc->supply.vqmmc)) {
+		if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "No vqmmc regulator found\n");
+	}
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
 
-#endif /* CONFIG_REGULATOR */
-
 /*
  * Mask off any voltages we don't support and select
  * the lowest voltage
@@ -1533,8 +1544,13 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
 	host->ios.timing = MMC_TIMING_LEGACY;
 	mmc_set_ios(host);
 
-	/* Set signal voltage to 3.3V */
-	__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
+	/* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
+	if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
+	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
+	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
 
 	/*
 	 * This delay should be sufficient to allow the power supply
@@ -2183,7 +2199,7 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
 {
 	struct mmc_command cmd = {0};
 
-	if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card))
+	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
 		return 0;
 
 	cmd.opcode = MMC_SET_BLOCKLEN;
@@ -2263,7 +2279,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check)
 		}
 	}
 
-	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR);
 	if (mmc_host_is_spi(host)) {
 		host->ios.chip_select = MMC_CS_HIGH;
 		host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
@@ -2403,6 +2418,11 @@ void mmc_rescan(struct work_struct *work)
 		container_of(work, struct mmc_host, detect.work);
 	int i;
 
+	if (host->trigger_card_event && host->ops->card_event) {
+		host->ops->card_event(host);
+		host->trigger_card_event = false;
+	}
+
 	if (host->rescan_disable)
 		return;
 

drivers/mmc/core/debugfs.c

@@ -135,8 +135,14 @@ static int mmc_ios_show(struct seq_file *s, void *data)
 	case MMC_TIMING_UHS_DDR50:
 		str = "sd uhs DDR50";
 		break;
+	case MMC_TIMING_MMC_DDR52:
+		str = "mmc DDR52";
+		break;
 	case MMC_TIMING_MMC_HS200:
-		str = "mmc high-speed SDR200";
+		str = "mmc HS200";
+		break;
+	case MMC_TIMING_MMC_HS400:
+		str = "mmc HS400";
 		break;
 	default:
 		str = "invalid";

drivers/mmc/core/host.c

@@ -447,6 +447,10 @@ int mmc_of_parse(struct mmc_host *host)
 		host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
 	if (of_find_property(np, "mmc-hs200-1_2v", &len))
 		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
+	if (of_find_property(np, "mmc-hs400-1_8v", &len))
+		host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
+	if (of_find_property(np, "mmc-hs400-1_2v", &len))
+		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
 
 	return 0;
 

drivers/mmc/core/sd.c

@@ -707,18 +707,10 @@ static struct attribute *sd_std_attrs[] = {
 	&dev_attr_serial.attr,
 	NULL,
 };
-
-static struct attribute_group sd_std_attr_group = {
-	.attrs = sd_std_attrs,
-};
-
-static const struct attribute_group *sd_attr_groups[] = {
-	&sd_std_attr_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(sd_std);
 
 struct device_type sd_type = {
-	.groups = sd_attr_groups,
+	.groups = sd_std_groups,
 };
 
 /*
@@ -895,7 +887,7 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card)
 {
 	unsigned max_dtr = (unsigned int)-1;
 
-	if (mmc_card_highspeed(card)) {
+	if (mmc_card_hs(card)) {
 		if (max_dtr > card->sw_caps.hs_max_dtr)
 			max_dtr = card->sw_caps.hs_max_dtr;
 	} else if (max_dtr > card->csd.max_dtr) {
@@ -905,12 +897,6 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card)
 	return max_dtr;
 }
 
-void mmc_sd_go_highspeed(struct mmc_card *card)
-{
-	mmc_card_set_highspeed(card);
-	mmc_set_timing(card->host, MMC_TIMING_SD_HS);
-}
-
 /*
  * Handle the detection and initialisation of a card.
  *
@@ -985,16 +971,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 		err = mmc_sd_init_uhs_card(card);
 		if (err)
 			goto free_card;
-
-		/* Card is an ultra-high-speed card */
-		mmc_card_set_uhs(card);
 	} else {
 		/*
 		 * Attempt to change to high-speed (if supported)
 		 */
 		err = mmc_sd_switch_hs(card);
 		if (err > 0)
-			mmc_sd_go_highspeed(card);
+			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
 		else if (err)
 			goto free_card;
 
@@ -1089,7 +1072,7 @@ static int _mmc_sd_suspend(struct mmc_host *host)
 
 	if (!mmc_host_is_spi(host))
 		err = mmc_deselect_cards(host);
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
+
 	if (!err) {
 		mmc_power_off(host);
 		mmc_card_set_suspended(host->card);
@@ -1198,7 +1181,6 @@ static int mmc_sd_power_restore(struct mmc_host *host)
 {
 	int ret;
 
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
 	mmc_claim_host(host);
 	ret = mmc_sd_init_card(host, host->card->ocr, host->card);
 	mmc_release_host(host);

drivers/mmc/core/sd.h

@@ -12,6 +12,5 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
 	bool reinit);
 unsigned mmc_sd_get_max_clock(struct mmc_card *card);
 int mmc_sd_switch_hs(struct mmc_card *card);
-void mmc_sd_go_highspeed(struct mmc_card *card);
 
 #endif

drivers/mmc/core/sdio.c

@@ -363,7 +363,7 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
 {
 	unsigned max_dtr;
 
-	if (mmc_card_highspeed(card)) {
+	if (mmc_card_hs(card)) {
 		/*
 		 * The SDIO specification doesn't mention how
 		 * the CIS transfer speed register relates to
@@ -733,7 +733,6 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 		mmc_set_clock(host, card->cis.max_dtr);
 
 		if (card->cccr.high_speed) {
-			mmc_card_set_highspeed(card);
 			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
 		}
 
@@ -792,16 +791,13 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 		err = mmc_sdio_init_uhs_card(card);
 		if (err)
 			goto remove;
-
-		/* Card is an ultra-high-speed card */
-		mmc_card_set_uhs(card);
 	} else {
 		/*
 		 * Switch to high-speed (if supported).
 		 */
 		err = sdio_enable_hs(card);
 		if (err > 0)
-			mmc_sd_go_highspeed(card);
+			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
 		else if (err)
 			goto remove;
 
@@ -943,40 +939,21 @@ static int mmc_sdio_pre_suspend(struct mmc_host *host)
  */
 static int mmc_sdio_suspend(struct mmc_host *host)
 {
-	int i, err = 0;
-
-	for (i = 0; i < host->card->sdio_funcs; i++) {
-		struct sdio_func *func = host->card->sdio_func[i];
-		if (func && sdio_func_present(func) && func->dev.driver) {
-			const struct dev_pm_ops *pmops = func->dev.driver->pm;
-			err = pmops->suspend(&func->dev);
-			if (err)
-				break;
-		}
-	}
-	while (err && --i >= 0) {
-		struct sdio_func *func = host->card->sdio_func[i];
-		if (func && sdio_func_present(func) && func->dev.driver) {
-			const struct dev_pm_ops *pmops = func->dev.driver->pm;
-			pmops->resume(&func->dev);
-		}
-	}
-
-	if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
+	if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
 		mmc_claim_host(host);
 		sdio_disable_wide(host->card);
 		mmc_release_host(host);
 	}
 
-	if (!err && !mmc_card_keep_power(host))
+	if (!mmc_card_keep_power(host))
 		mmc_power_off(host);
 
-	return err;
+	return 0;
 }
 
 static int mmc_sdio_resume(struct mmc_host *host)
 {
-	int i, err = 0;
+	int err = 0;
 
 	BUG_ON(!host);
 	BUG_ON(!host->card);
@@ -1019,24 +996,6 @@ static int mmc_sdio_resume(struct mmc_host *host)
 		wake_up_process(host->sdio_irq_thread);
 	mmc_release_host(host);
 
-	/*
-	 * If the card looked to be the same as before suspending, then
-	 * we proceed to resume all card functions.  If one of them returns
-	 * an error then we simply return that error to the core and the
-	 * card will be redetected as new.  It is the responsibility of
-	 * the function driver to perform further tests with the extra
-	 * knowledge it has of the card to confirm the card is indeed the
-	 * same as before suspending (same MAC address for network cards,
-	 * etc.) and return an error otherwise.
-	 */
-	for (i = 0; !err && i < host->card->sdio_funcs; i++) {
-		struct sdio_func *func = host->card->sdio_func[i];
-		if (func && sdio_func_present(func) && func->dev.driver) {
-			const struct dev_pm_ops *pmops = func->dev.driver->pm;
-			err = pmops->resume(&func->dev);
-		}
-	}
-
 	host->pm_flags &= ~MMC_PM_KEEP_POWER;
 	return err;
 }

drivers/mmc/core/sdio_bus.c

@@ -197,20 +197,8 @@ static int sdio_bus_remove(struct device *dev)
 
 #ifdef CONFIG_PM
 
-#ifdef CONFIG_PM_SLEEP
-static int pm_no_operation(struct device *dev)
-{
-	/*
-	 * Prevent the PM core from calling SDIO device drivers' suspend
-	 * callback routines, which it is not supposed to do, by using this
-	 * empty function as the bus type suspend callaback for SDIO.
-	 */
-	return 0;
-}
-#endif
-
 static const struct dev_pm_ops sdio_bus_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
 	SET_RUNTIME_PM_OPS(
 		pm_generic_runtime_suspend,
 		pm_generic_runtime_resume,

drivers/mmc/core/sdio_irq.c

@@ -90,6 +90,15 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 	return ret;
 }
 
+void sdio_run_irqs(struct mmc_host *host)
+{
+	mmc_claim_host(host);
+	host->sdio_irq_pending = true;
+	process_sdio_pending_irqs(host);
+	mmc_release_host(host);
+}
+EXPORT_SYMBOL_GPL(sdio_run_irqs);
+
 static int sdio_irq_thread(void *_host)
 {
 	struct mmc_host *host = _host;
@@ -189,14 +198,20 @@ static int sdio_card_irq_get(struct mmc_card *card)
 	WARN_ON(!host->claimed);
 
 	if (!host->sdio_irqs++) {
-		atomic_set(&host->sdio_irq_thread_abort, 0);
-		host->sdio_irq_thread =
-			kthread_run(sdio_irq_thread, host, "ksdioirqd/%s",
-				mmc_hostname(host));
-		if (IS_ERR(host->sdio_irq_thread)) {
-			int err = PTR_ERR(host->sdio_irq_thread);
-			host->sdio_irqs--;
-			return err;
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			atomic_set(&host->sdio_irq_thread_abort, 0);
+			host->sdio_irq_thread =
+				kthread_run(sdio_irq_thread, host,
+					    "ksdioirqd/%s", mmc_hostname(host));
+			if (IS_ERR(host->sdio_irq_thread)) {
+				int err = PTR_ERR(host->sdio_irq_thread);
+				host->sdio_irqs--;
+				return err;
+			}
+		} else {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 1);
+			mmc_host_clk_release(host);
 		}
 	}
 
@@ -211,8 +226,14 @@ static int sdio_card_irq_put(struct mmc_card *card)
 	BUG_ON(host->sdio_irqs < 1);
 
 	if (!--host->sdio_irqs) {
-		atomic_set(&host->sdio_irq_thread_abort, 1);
-		kthread_stop(host->sdio_irq_thread);
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			atomic_set(&host->sdio_irq_thread_abort, 1);
+			kthread_stop(host->sdio_irq_thread);
+		} else {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 0);
+			mmc_host_clk_release(host);
+		}
 	}
 
 	return 0;

drivers/mmc/core/slot-gpio.c

@@ -32,9 +32,7 @@ static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
 	/* Schedule a card detection after a debounce timeout */
 	struct mmc_host *host = dev_id;
 
-	if (host->ops->card_event)
-		host->ops->card_event(host);
-
+	host->trigger_card_event = true;
 	mmc_detect_change(host, msecs_to_jiffies(200));
 
 	return IRQ_HANDLED;

drivers/mmc/host/Kconfig

@@ -168,7 +168,7 @@ config MMC_SDHCI_ESDHC_IMX
 
 config MMC_SDHCI_DOVE
 	tristate "SDHCI support on Marvell's Dove SoC"
-	depends on ARCH_DOVE
+	depends on ARCH_DOVE || MACH_DOVE
 	depends on MMC_SDHCI_PLTFM
 	select MMC_SDHCI_IO_ACCESSORS
 	help
@@ -283,6 +283,15 @@ config MMC_SDHCI_BCM2835
 
 	  If unsure, say N.
 
+config MMC_MOXART
+	tristate "MOXART SD/MMC Host Controller support"
+	depends on ARCH_MOXART && MMC
+	help
+	  This selects support for the MOXART SD/MMC Host Controller.
+	  MOXA provides one multi-functional card reader which can
+	  be found on some embedded hardware such as UC-7112-LX.
+	  If you have a controller with this interface, say Y here.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -688,6 +697,12 @@ config MMC_WMT
 	  To compile this driver as a module, choose M here: the
 	  module will be called wmt-sdmmc.
 
+config MMC_USDHI6ROL0
+	tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
+	help
+	  This selects support for the Renesas USDHI6ROL0 SD/SDIO
+	  Host Controller
+
 config MMC_REALTEK_PCI
 	tristate "Realtek PCI-E SD/MMC Card Interface Driver"
 	depends on MFD_RTSX_PCI

drivers/mmc/host/Makefile

@@ -50,7 +50,9 @@ obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)	+= vub300.o
 obj-$(CONFIG_MMC_USHC)		+= ushc.o
 obj-$(CONFIG_MMC_WMT)		+= wmt-sdmmc.o
+obj-$(CONFIG_MMC_MOXART)	+= moxart-mmc.o
 obj-$(CONFIG_MMC_SUNXI)		+= sunxi-mmc.o
+obj-$(CONFIG_MMC_USDHI6ROL0)	+= usdhi6rol0.o
 
 obj-$(CONFIG_MMC_REALTEK_PCI)	+= rtsx_pci_sdmmc.o
 obj-$(CONFIG_MMC_REALTEK_USB)	+= rtsx_usb_sdmmc.o

drivers/mmc/host/atmel-mci.c

@@ -820,16 +820,9 @@ static void atmci_pdc_complete(struct atmel_mci *host)
 
 	atmci_pdc_cleanup(host);
 
-	/*
-	 * If the card was removed, data will be NULL. No point trying
-	 * to send the stop command or waiting for NBUSY in this case.
-	 */
-	if (host->data) {
-		dev_dbg(&host->pdev->dev,
-		        "(%s) set pending xfer complete\n", __func__);
-		atmci_set_pending(host, EVENT_XFER_COMPLETE);
-		tasklet_schedule(&host->tasklet);
-	}
+	dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__);
+	atmci_set_pending(host, EVENT_XFER_COMPLETE);
+	tasklet_schedule(&host->tasklet);
 }
 
 static void atmci_dma_cleanup(struct atmel_mci *host)

drivers/mmc/host/dw_mmc-exynos.c

@@ -187,7 +187,7 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 	unsigned long actual;
 	u8 div = priv->ciu_div + 1;
 
-	if (ios->timing == MMC_TIMING_UHS_DDR50) {
+	if (ios->timing == MMC_TIMING_MMC_DDR52) {
 		mci_writel(host, CLKSEL, priv->ddr_timing);
 		/* Should be double rate for DDR mode */
 		if (ios->bus_width == MMC_BUS_WIDTH_8)
@@ -386,8 +386,7 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode,
 
 /* Common capabilities of Exynos4/Exynos5 SoC */
 static unsigned long exynos_dwmmc_caps[4] = {
-	MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
-		MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
+	MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
 	MMC_CAP_CMD23,
 	MMC_CAP_CMD23,
 	MMC_CAP_CMD23,
@@ -426,7 +425,7 @@ static int dw_mci_exynos_probe(struct platform_device *pdev)
 	return dw_mci_pltfm_register(pdev, drv_data);
 }
 
-const struct dev_pm_ops dw_mci_exynos_pmops = {
+static const struct dev_pm_ops dw_mci_exynos_pmops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dw_mci_exynos_suspend, dw_mci_exynos_resume)
 	.resume_noirq = dw_mci_exynos_resume_noirq,
 	.thaw_noirq = dw_mci_exynos_resume_noirq,