Skip to content

L
linux
Commit 0890a264 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc 

Pull ARC architecture updates from Vineet Gupta:

 - support for HS38 cores based on ARCv2 ISA

     ARCv2 is the next generation ISA from Synopsys and basis for the
     HS3{4,6,8} families of processors which retain the traditional ARC mantra of
     low power and configurability and are now more performant and feature rich.

     HS38x is a 10 stage pipeline core which supports MMU (with huge pages) and
     SMP (upto 4 cores) among other features.

     + www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor
     + http://news.synopsys.com/2014-10-14-New-DesignWare-ARC-HS38-Processor-Doubles-Performance-for-Embedded-Linux-Applications
     + http://www.embedded.com/electronics-news/4435975/Synopsys-ARC-HS38-core-gives-2X-boost-to-Linux-based-apps

 - support for ARC SDP (Software Development platform): Main Board + CPU Cards
    = AXS101: CPU Card with ARC700 in silicon @ 700 MHz
    = AXS103: CPU Card with HS38x in FPGA

 - refactoring of ARCompact port to accomodate new ARCv2 ISA

 - misc updates/cleanups

* tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (72 commits)
  ARC: Fix build failures for ARCompact in linux-next after ARCv2 support
  ARCv2: Allow older gcc to cope with new regime of ARCv2/ARCompact support
  ARCv2: [vdk] dts files and defconfig for HS38 VDK
  ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores
  ARC: [axs101] Prepare for AXS103
  ARCv2: [nsim*hs*] Support simulation platforms for HS38x cores
  ARCv2: All bits in place, allow ARCv2 builds
  ARCv2: SLC: Handle explcit flush for DMA ops (w/o IO-coherency)
  ARCv2: STAR 9000837815 workaround hardware exclusive transactions livelock
  ARC: Reduce bitops lines of code using macros
  ARCv2: barriers
  arch: conditionally define smp_{mb,rmb,wmb}
  ARC: add smp barriers around atomics per Documentation/atomic_ops.txt
  ARC: add compiler barrier to LLSC based cmpxchg
  ARCv2: SMP: intc: IDU 2nd level intc for dynamic IRQ distribution
  ARCv2: SMP: clocksource: Enable Global Real Time counter
  ARCv2: SMP: ARConnect debug/robustness
  ARCv2: SMP: Support ARConnect (MCIP) for Inter-Core-Interrupts et al
  ARC: make plat_smp_ops weak to allow over-rides
  ARCv2: clocksource: Introduce 64bit local RTC counter
  ...
parents 05a8256c 40b8ad8f
Expand all Show whitespace changes
Inline Side-by-side
Showing with 6998 additions and 2300 deletions
Documentation/devicetree/bindings/arc/archs-idu-intc.txt 0 → 100644
View file @ 0890a264
* ARC-HS Interrupt Distribution Unit
This optional 2nd level interrupt controller can be used in SMP configurations for
dynamic IRQ routing, load balancing of common/external IRQs towards core intc.
Properties:
- compatible: "snps,archs-idu-intc"
- interrupt-controller: This is an interrupt controller.
- interrupt-parent: <reference to parent core intc>
- #interrupt-cells: Must be <2>.
- interrupts: <...> specifies the upstream core irqs
First cell specifies the "common" IRQ from peripheral to IDU
Second cell specifies the irq distribution mode to cores
0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
intc accessed via the special ARC AUX register interface, hence "reg" property
is not specified.
Example:
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
idu_intc: idu-interrupt-controller {
compatible = "snps,archs-idu-intc";
interrupt-controller;
interrupt-parent = <&core_intc>;
/*
* <hwirq distribution>
* distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
*/
#interrupt-cells = <2>;
/* upstream core irqs: downstream these are "COMMON" irq 0,1.. */
interrupts = <24 25 26 27 28 29 30 31>;
};
some_device: serial@c0fc1000 {
interrupt-parent = <&idu_intc>;
interrupts = <0 0>; /* upstream idu IRQ #24, Round Robin */
};
Documentation/devicetree/bindings/arc/archs-intc.txt 0 → 100644
View file @ 0890a264
* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA)
Properties:
- compatible: "snps,archs-intc"
- interrupt-controller: This is an interrupt controller.
- #interrupt-cells: Must be <1>.
Single Cell "interrupts" property of a device specifies the IRQ number
between 16 to 256
intc accessed via the special ARC AUX register interface, hence "reg" property
is not specified.
Example:
intc: interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
interrupts = <16 17 18 19 20 21 22 23 24 25>;
};
Documentation/devicetree/bindings/arc/axs101.txt 0 → 100644
View file @ 0890a264
Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings
---------------------------------------------------------------------------
SDP Main Board with an AXC001 CPU Card hoisting ARC700 core in silicon
Required root node properties:
- compatible = "snps,axs101", "snps,arc-sdp";
Documentation/devicetree/bindings/arc/axs103.txt 0 → 100644
View file @ 0890a264
Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings
---------------------------------------------------------------------------
SDP Main Board with an AXC003 FPGA Card which can contain various flavours of
HS38x cores.
Required root node properties:
- compatible = "snps,axs103", "snps,arc-sdp";
MAINTAINERS
View file @ 0890a264
......@@ -9832,6 +9832,13 @@ F: arch/arc/
F: Documentation/devicetree/bindings/arc/
F: drivers/tty/serial/arc_uart.c
SYNOPSYS ARC SDP platform support
M: Alexey Brodkin <abrodkin@synopsys.com>
S: Supported
F: arch/arc/plat-axs10x
F: arch/arc/boot/dts/ax*
F: Documentation/devicetree/bindings/arc/axs10*
SYSTEM CONFIGURATION (SYSCON)
M: Lee Jones <lee.jones@linaro.org>
M: Arnd Bergmann <arnd@arndb.de>
......
arch/arc/Kconfig
View file @ 0890a264
......@@ -81,17 +81,37 @@ menu "ARC Architecture Configuration"
menu "ARC Platform/SoC/Board"
source "arch/arc/plat-arcfpga/Kconfig"
source "arch/arc/plat-sim/Kconfig"
source "arch/arc/plat-tb10x/Kconfig"
source "arch/arc/plat-axs10x/Kconfig"
#New platform adds here
endmenu
choice
prompt "ARC Instruction Set"
default ISA_ARCOMPACT
config ISA_ARCOMPACT
bool "ARCompact ISA"
help
The original ARC ISA of ARC600/700 cores
config ISA_ARCV2
bool "ARC ISA v2"
help
ISA for the Next Generation ARC-HS cores
endchoice
menu "ARC CPU Configuration"
choice
prompt "ARC Core"
default ARC_CPU_770
default ARC_CPU_770 if ISA_ARCOMPACT
default ARC_CPU_HS if ISA_ARCV2
if ISA_ARCOMPACT
config ARC_CPU_750D
bool "ARC750D"
......@@ -100,7 +120,7 @@ config ARC_CPU_750D
config ARC_CPU_770
bool "ARC770"
select ARC_CPU_REL_4_10
select ARC_HAS_SWAPE
help
Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
This core has a bunch of cool new features:
......@@ -109,6 +129,27 @@ config ARC_CPU_770
-Caches: New Prog Model, Region Flush
-Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
endif #ISA_ARCOMPACT
config ARC_CPU_HS
bool "ARC-HS"
depends on ISA_ARCV2
help
Support for ARC HS38x Cores based on ARCv2 ISA
The notable features are:
- SMP configurations of upto 4 core with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
endchoice
config CPU_BIG_ENDIAN
......@@ -117,17 +158,13 @@ config CPU_BIG_ENDIAN
help
Build kernel for Big Endian Mode of ARC CPU
# If a platform can't work with 0x8000_0000 based dma_addr_t
config ARC_PLAT_NEEDS_CPU_TO_DMA
bool
config SMP
bool "Symmetric Multi-Processing (Incomplete)"
bool "Symmetric Multi-Processing"
default n
select ARC_HAS_COH_CACHES if ISA_ARCV2
select ARC_MCIP if ISA_ARCV2
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
than one CPU, say Y.
This enables support for systems with more than one CPU.
if SMP
......@@ -137,13 +174,20 @@ config ARC_HAS_COH_CACHES
config ARC_HAS_REENTRANT_IRQ_LV2
def_bool n
endif
config ARC_MCIP
bool "ARConnect Multicore IP (MCIP) Support "
depends on ISA_ARCV2
help
This IP block enables SMP in ARC-HS38 cores.
It provides for cross-core interrupts, multi-core debug
hardware semaphores, shared memory,....
config NR_CPUS
int "Maximum number of CPUs (2-4096)"
range 2 4096
depends on SMP
default "2"
default "4"
endif #SMP
menuconfig ARC_CACHE
bool "Enable Cache Support"
......@@ -185,7 +229,7 @@ config ARC_CACHE_PAGES
config ARC_CACHE_VIPT_ALIASING
bool "Support VIPT Aliasing D$"
depends on ARC_HAS_DCACHE
depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
default n
endif #ARC_CACHE
......@@ -226,9 +270,10 @@ config ARC_HAS_HW_MPY
Multipler. Otherwise software multipy lib is used
choice
prompt "ARC700 MMU Version"
prompt "MMU Version"
default ARC_MMU_V3 if ARC_CPU_770
default ARC_MMU_V2 if ARC_CPU_750D
default ARC_MMU_V4 if ARC_CPU_HS
config ARC_MMU_V1
bool "MMU v1"
......@@ -249,6 +294,10 @@ config ARC_MMU_V3
Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
Shared Address Spaces (SASID)
config ARC_MMU_V4
bool "MMU v4"
depends on ISA_ARCV2
endchoice
......@@ -271,6 +320,8 @@ config ARC_PAGE_SIZE_4K
endchoice
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
bool "ARCompact IRQ Priorities: High(2)/Low(1)"
default n
......@@ -290,7 +341,7 @@ config ARC_IRQ5_LV2
config ARC_IRQ6_LV2
bool
endif
endif #ARC_COMPACT_IRQ_LEVELS
config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
......@@ -303,32 +354,53 @@ config ARC_FPU_SAVE_RESTORE
based on actual usage of FPU by a task. Thus our implemn does
this for all tasks in system.
endif #ISA_ARCOMPACT
config ARC_CANT_LLSC
def_bool n
menuconfig ARC_CPU_REL_4_10
bool "Enable support for Rel 4.10 features"
default n
help
-ARC770 (and dependent features) enabled
-ARC750 also shares some of the new features with 770
config ARC_HAS_LLSC
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
default y
depends on ARC_CPU_770 && !ARC_CANT_LLSC
depends on !ARC_CPU_750D && !ARC_CANT_LLSC
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
default y
depends on ARC_CPU_REL_4_10
config ARC_HAS_RTSC
bool "Insn: RTSC (64-bit r/o cycle counter)"
if ISA_ARCV2
config ARC_HAS_LL64
bool "Insn: 64bit LDD/STD"
help
Enable gcc to generate 64-bit load/store instructions
ISA mandates even/odd registers to allow encoding of two
dest operands with 2 possible source operands.
default y
depends on ARC_CPU_REL_4_10
config ARC_HAS_RTC
bool "Local 64-bit r/o cycle counter"
default n
depends on !SMP
config ARC_HAS_GRTC
bool "SMP synchronized 64-bit cycle counter"
default y
depends on SMP
config ARC_NUMBER_OF_INTERRUPTS
int "Number of interrupts"
range 8 240
default 32
help
This defines the number of interrupts on the ARCv2HS core.
It affects the size of vector table.
The initial 8 IRQs are fixed (Timer, ICI etc) and although configurable
in hardware, it keep things simple for Linux to assume they are always
present.
endif # ISA_ARCV2
endmenu # "ARC CPU Configuration"
config LINUX_LINK_BASE
......@@ -354,8 +426,10 @@ config ARC_CURR_IN_REG
config ARC_EMUL_UNALIGNED
bool "Emulate unaligned memory access (userspace only)"
default N
select SYSCTL_ARCH_UNALIGN_NO_WARN
select SYSCTL_ARCH_UNALIGN_ALLOW
depends on ISA_ARCOMPACT
help
This enables misaligned 16 & 32 bit memory access from user space.
Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
......@@ -378,9 +452,10 @@ menuconfig ARC_DBG
bool "ARC debugging"
default y
if ARC_DBG
config ARC_DW2_UNWIND
bool "Enable DWARF specific kernel stack unwind"
depends on ARC_DBG
default y
select KALLSYMS
help
......@@ -394,18 +469,38 @@ config ARC_DW2_UNWIND
config ARC_DBG_TLB_PARANOIA
bool "Paranoia Checks in Low Level TLB Handlers"
depends on ARC_DBG
default n
config ARC_DBG_TLB_MISS_COUNT
bool "Profile TLB Misses"
default n
select DEBUG_FS
depends on ARC_DBG
help
Counts number of I and D TLB Misses and exports them via Debugfs
The counters can be cleared via Debugfs as well
if SMP
config ARC_IPI_DBG
bool "Debug Inter Core interrupts"
default n
endif
endif
config ARC_UBOOT_SUPPORT
bool "Support uboot arg Handling"
default n
help
ARC Linux by default checks for uboot provided args as pointers to
external cmdline or DTB. This however breaks in absence of uboot,
when booting from Metaware debugger directly, as the registers are
not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
registers look like uboot args to kernel which then chokes.
So only enable the uboot arg checking/processing if users are sure
of uboot being in play.
config ARC_BUILTIN_DTB_NAME
string "Built in DTB"
help
......
arch/arc/Makefile
View file @ 0890a264
......@@ -9,12 +9,14 @@
UTS_MACHINE := arc
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := arc-linux-uclibc-
CROSS_COMPILE := arc-linux-
endif
KBUILD_DEFCONFIG := nsim_700_defconfig
cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__
cflags-y += -fno-common -pipe -fno-builtin -D__linux__
cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7
cflags-$(CONFIG_ISA_ARCV2) += -mcpu=archs
ifdef CONFIG_ARC_CURR_IN_REG
# For a global register defintion, make sure it gets passed to every file
......@@ -33,7 +35,11 @@ cflags-$(atleast_gcc44) += -fsection-anchors
cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock
cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
cflags-$(CONFIG_ARC_HAS_RTSC) += -mrtsc
ifndef CONFIG_ARC_HAS_LL64
cflags-$(CONFIG_ISA_ARCV2) += -mno-ll64
endif
cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables
# By default gcc 4.8 generates dwarf4 which kernel unwinder can't grok
......@@ -81,8 +87,9 @@ core-y += arch/arc/
# w/o this dtb won't embed into kernel binary
core-y += arch/arc/boot/dts/
core-$(CONFIG_ARC_PLAT_FPGA_LEGACY) += arch/arc/plat-arcfpga/
core-$(CONFIG_ARC_PLAT_SIM) += arch/arc/plat-sim/
core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/
drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/
......
arch/arc/boot/dts/Makefile
View file @ 0890a264
# Built-in dtb
builtindtb-y := angel4
builtindtb-y := nsim_700
ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"")
builtindtb-y := $(patsubst "%",%,$(CONFIG_ARC_BUILTIN_DTB_NAME))
......
arch/arc/boot/dts/axc001.dtsi 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device tree for AXC001 770D/EM6/AS221 CPU card
* Note that this file only supports the 770D CPU
*/
/ {
compatible = "snps,arc";
clock-frequency = <750000000>; /* 750 MHZ */
#address-cells = <1>;
#size-cells = <1>;
cpu_card {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xf0000000 0x10000000>;
cpu_intc: arc700-intc@cpu {
compatible = "snps,arc700-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
/*
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
dw-apb-gpio@0x2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
#size-cells = <0>;
ictl_intc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <30>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&cpu_intc>;
interrupts = <15>;
};
};
debug_uart: dw-apb-uart@0x5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
interrupt-parent = <&ictl_intc>;
interrupts = <19 4>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
arcpmu0: pmu {
compatible = "snps,arc700-pct";
};
};
/*
* This INTC is actually connected to DW APB GPIO
* which acts as a wire between MB INTC and CPU INTC.
* GPIO INTC is configured in platform init code
* and here we mimic direct connection from MB INTC to
* CPU INTC, thus we set "interrupts = <7>" instead of
* "interrupts = <12>"
*
* This intc actually resides on MB, but we move it here to
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
mb_intc: dw-apb-ictl@0xe0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
interrupt-controller;
interrupt-parent = <&cpu_intc>;
interrupts = < 7 >;
};
memory {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512MiB */
};
};
arch/arc/boot/dts/axc003.dtsi 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device tree for AXC003 CPU card: HS38x UP configuration
*/
/ {
compatible = "snps,arc";
clock-frequency = <75000000>;
#address-cells = <1>;
#size-cells = <1>;
cpu_card {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xf0000000 0x10000000>;
cpu_intc: archs-intc@cpu {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
/*
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
dw-apb-gpio@0x2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
#size-cells = <0>;
ictl_intc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <30>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&cpu_intc>;
interrupts = <25>;
};
};
debug_uart: dw-apb-uart@0x5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
interrupt-parent = <&ictl_intc>;
interrupts = <2 4>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <20>;
};
};
/*
* This INTC is actually connected to DW APB GPIO
* which acts as a wire between MB INTC and CPU INTC.
* GPIO INTC is configured in platform init code
* and here we mimic direct connection from MB INTC to
* CPU INTC, thus we set "interrupts = <7>" instead of
* "interrupts = <12>"
*
* This intc actually resides on MB, but we move it here to
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
mb_intc: dw-apb-ictl@0xe0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
interrupt-controller;
interrupt-parent = <&cpu_intc>;
interrupts = < 24 >;
};
memory {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512MiB */
};
};
arch/arc/boot/dts/axc003_idu.dtsi 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc
*/
/ {
compatible = "snps,arc";
clock-frequency = <75000000>;
#address-cells = <1>;
#size-cells = <1>;
cpu_card {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xf0000000 0x10000000>;
cpu_intc: archs-intc@cpu {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
idu_intc: idu-interrupt-controller {
compatible = "snps,archs-idu-intc";
interrupt-controller;
interrupt-parent = <&cpu_intc>;
/*
* <hwirq distribution>
* distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
*/
#interrupt-cells = <2>;
/*
* upstream irqs to core intc - downstream these are
* "COMMON" irq 0,1..
*/
interrupts = <24 25>;
};
/*
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
dw-apb-gpio@0x2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
#size-cells = <0>;
ictl_intc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <30>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&idu_intc>;
/*
* cmn irq 1 -> cpu irq 25
* Distribute to cpu0 only
*/
interrupts = <1 1>;
};
};
debug_uart: dw-apb-uart@0x5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
interrupt-parent = <&ictl_intc>;
interrupts = <2 4>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <20>;
};
};
/*
* This INTC is actually connected to DW APB GPIO
* which acts as a wire between MB INTC and CPU INTC.
* GPIO INTC is configured in platform init code
* and here we mimic direct connection from MB INTC to
* CPU INTC, thus we set "interrupts = <0 1>" instead of
* "interrupts = <12>"
*
* This intc actually resides on MB, but we move it here to
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
mb_intc: dw-apb-ictl@0xe0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
interrupt-controller;
interrupt-parent = <&idu_intc>;
interrupts = <0 1>; /* cmn irq 0 -> cpu irq 24
distribute to cpu0 only */
};
memory {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512MiB */
};
};
arch/arc/boot/dts/axs101.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
* ARC AXS101 S/W development platform
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "axc001.dtsi"
/include/ "axs10x_mb.dtsi"
/ {
compatible = "snps,axs101", "snps,arc-sdp";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0";
};
};
arch/arc/boot/dts/axs103.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device Tree for AXS103 SDP with AXS10X Main Board and
* AXC003 FPGA Card (with UP bitfile)
*/
/dts-v1/;
/include/ "axc003.dtsi"
/include/ "axs10x_mb.dtsi"
/ {
compatible = "snps,axs103", "snps,arc-sdp";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1";
};
};
arch/arc/boot/dts/axs103_idu.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device Tree for AXS103 SDP with AXS10X Main Board and
* AXC003 FPGA Card (with SMP bitfile)
*/
/dts-v1/;
/include/ "axc003_idu.dtsi"
/include/ "axs10x_mb.dtsi"
/ {
compatible = "snps,axs103", "snps,arc-sdp";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1";
};
};
arch/arc/boot/dts/axs10x_mb.dtsi 0 → 100644
View file @ 0890a264
/*
* Support for peripherals on the AXS10x mainboard
*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
axs10x_mb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xe0000000 0x10000000>;
interrupt-parent = <&mb_intc>;
clocks {
i2cclk: i2cclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
apbclk: apbclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
mmcclk: mmcclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
};
ethernet@0x18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
interrupts = < 4 >;
interrupt-names = "macirq";
phy-mode = "rgmii";
snps,pbl = < 32 >;
clocks = <&apbclk>;
clock-names = "stmmaceth";
};
ehci@0x40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
ohci@0x60000 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
};
/*
* According to DW Mobile Storage databook it is required
* to use "Hold Register" if card is enumerated in SDR12 or
* SDR25 modes.
*
* Utilization of "Hold Register" is already implemented via
* dw_mci_pltfm_prepare_command() which in its turn gets
* used through dw_mci_drv_data->prepare_command call-back.
* This call-back is used in Altera Socfpga platform and so
* we may reuse it saying that we're compatible with their
* "altr,socfpga-dw-mshc".
*
* Most probably "Hold Register" utilization is platform-
* independent requirement which means that single unified
* "snps,dw-mshc" should be enough for all users of DW MMC once
* dw_mci_pltfm_prepare_command() is used in generic platform
* code.
*/
mmc@0x15000 {
compatible = "altr,socfpga-dw-mshc";
reg = < 0x15000 0x400 >;
num-slots = < 1 >;
fifo-depth = < 16 >;
card-detect-delay = < 200 >;
clocks = <&apbclk>, <&mmcclk>;
clock-names = "biu", "ciu";
interrupts = < 7 >;
bus-width = < 4 >;
};
uart@0x20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <33333333>;
interrupts = <17>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart@0x21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <33333333>;
interrupts = <18>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
/* UART muxed with USB data port (ttyS3) */
uart@0x22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <33333333>;
interrupts = <19>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
i2c@0x1d000 {
compatible = "snps,designware-i2c";
reg = <0x1d000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <14>;
};
i2c@0x1e000 {
compatible = "snps,designware-i2c";
reg = <0x1e000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <15>;
};
i2c@0x1f000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1f000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <16>;
eeprom@0x54{
compatible = "24c01";
reg = <0x54>;
pagesize = <0x8>;
};
eeprom@0x57{
compatible = "24c04";
reg = <0x57>;
pagesize = <0x8>;
};
};
gpio0:gpio@13000 {
compatible = "snps,dw-apb-gpio";
reg = <0x13000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
gpio0_banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
gpio0_bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <1>;
};
gpio0_bankc: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <2>;
};
};
gpio1:gpio@14000 {
compatible = "snps,dw-apb-gpio";
reg = <0x14000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
gpio1_banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <30>;
reg = <0>;
};
gpio1_bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <10>;
reg = <1>;
};
gpio1_bankc: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <2>;
};
};
};
};
arch/arc/boot/dts/angel4.dts → arch/arc/boot/dts/nsim_700.dts
View file @ 0890a264
......@@ -10,7 +10,7 @@
/include/ "skeleton.dtsi"
/ {
compatible = "snps,arc-angel4";
compatible = "snps,nsim";
clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
......
arch/arc/boot/dts/nsim_hs.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/ {
compatible = "snps,nsim_hs";
interrupt-parent = <&core_intc>;
chosen {
bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
};
aliases {
serial0 = &arcuart0;
};
fpga {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
arcuart0: serial@c0fc1000 {
compatible = "snps,arc-uart";
reg = <0xc0fc1000 0x100>;
interrupts = <24>;
clock-frequency = <80000000>;
current-speed = <115200>;
status = "okay";
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupts = <20>;
};
};
};
arch/arc/boot/dts/nsim_hs_idu.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/ {
compatible = "snps,nsim_hs";
interrupt-parent = <&core_intc>;
chosen {
bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
};
aliases {
serial0 = &arcuart0;
};
fpga {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
idu_intc: idu-interrupt-controller {
compatible = "snps,archs-idu-intc";
interrupt-controller;
interrupt-parent = <&core_intc>;
/*
* <hwirq distribution>
* distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
*/
#interrupt-cells = <2>;
/*
* upstream irqs to core intc - downstream these are
* "COMMON" irq 0,1..
*/
interrupts = <24 25 26 27 28 29 30 31>;
};
arcuart0: serial@c0fc1000 {
compatible = "snps,arc-uart";
reg = <0xc0fc1000 0x100>;
interrupt-parent = <&idu_intc>;
interrupts = <0 0>;
clock-frequency = <80000000>;
current-speed = <115200>;
status = "okay";
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupts = <20>;
};
};
};
arch/arc/boot/dts/nsimosci_hs.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/ {
compatible = "snps,nsimosci_hs";
clock-frequency = <20000000>; /* 20 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
chosen {
/* this is for console on PGU */
/* bootargs = "console=tty0 consoleblank=0"; */
/* this is for console on serial */
bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
};
aliases {
serial0 = &uart0;
};
fpga {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
uart0: serial@f0000000 {
compatible = "ns8250";
reg = <0xf0000000 0x2000>;
interrupts = <24>;
clock-frequency = <3686400>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
no-loopback-test = <1>;
};
pgu0: pgu@f9000000 {
compatible = "snps,arcpgufb";
reg = <0xf9000000 0x400>;
};
ps2: ps2@f9001000 {
compatible = "snps,arc_ps2";
reg = <0xf9000400 0x14>;
interrupts = <27>;
interrupt-names = "arc_ps2_irq";
};
eth0: ethernet@f0003000 {
compatible = "snps,oscilan";
reg = <0xf0003000 0x44>;
interrupts = <25>, <26>;
interrupt-names = "rx", "tx";
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupts = <20>;
};
};
};
arch/arc/boot/dts/nsimosci_hs_idu.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/ {
compatible = "snps,nsimosci_hs";
clock-frequency = <5000000>; /* 5 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
chosen {
/* this is for console on serial */
bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug";
};
aliases {
serial0 = &uart0;
};
fpga {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
/* interrupts = <16 17 18 19 20 21 22 23 24 25>; */
};
idu_intc: idu-interrupt-controller {
compatible = "snps,archs-idu-intc";
interrupt-controller;
interrupt-parent = <&core_intc>;
/*
* <hwirq distribution>
* distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
*/
#interrupt-cells = <2>;
/*
* upstream irqs to core intc - downstream these are
* "COMMON" irq 0,1..
*/
interrupts = <24 25 26 27 28 29 30 31>;
};
uart0: serial@f0000000 {
compatible = "ns8250";
reg = <0xf0000000 0x2000>;
interrupt-parent = <&idu_intc>;
interrupts = <0 0>; /* cmn irq 0 -> cpu irq 24
RR distribute to all cpus */
clock-frequency = <3686400>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
no-loopback-test = <1>;
};
pgu0: pgu@f9000000 {
compatible = "snps,arcpgufb";
reg = <0xf9000000 0x400>;
};
ps2: ps2@f9001000 {
compatible = "snps,arc_ps2";
reg = <0xf9000400 0x14>;
interrupts = <3 0>;
interrupt-parent = <&idu_intc>;
interrupt-names = "arc_ps2_irq";
};
eth0: ethernet@f0003000 {
compatible = "snps,oscilan";
reg = <0xf0003000 0x44>;
interrupt-parent = <&idu_intc>;
interrupts = <1 2>, <2 2>;
interrupt-names = "rx", "tx";
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupts = <20>;
};
};
};
arch/arc/boot/dts/vdk_axc003.dtsi 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2013, 2014 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device tree for AXC003 CPU card: HS38x UP configuration (VDK version)
*/
/ {
compatible = "snps,arc";
clock-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
cpu_card {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xf0000000 0x10000000>;
cpu_intc: archs-intc@cpu {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
debug_uart: dw-apb-uart@0x5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
interrupt-parent = <&cpu_intc>;
interrupts = <19>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
};
mb_intc: dw-apb-ictl@0xe0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
interrupt-controller;
interrupt-parent = <&cpu_intc>;
interrupts = < 18 >;
};
memory {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512MiB */
};
};
arch/arc/boot/dts/vdk_axc003_idu.dtsi 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device tree for AXC003 CPU card:
* HS38x2 (Dual Core) with IDU intc (VDK version)
*/
/ {
compatible = "snps,arc";
clock-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
cpu_card {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xf0000000 0x10000000>;
cpu_intc: archs-intc@cpu {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
idu_intc: idu-interrupt-controller {
compatible = "snps,archs-idu-intc";
interrupt-controller;
interrupt-parent = <&cpu_intc>;
/*
* <hwirq distribution>
* distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
*/
#interrupt-cells = <2>;
interrupts = <24 25 26 27>;
};
debug_uart: dw-apb-uart@0x5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
interrupt-parent = <&idu_intc>;
interrupts = <2 0>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
};
mb_intc: dw-apb-ictl@0xe0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
interrupt-controller;
interrupt-parent = <&idu_intc>;
interrupts = < 0 0 >;
};
memory {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512MiB */
};
};
arch/arc/boot/dts/vdk_axs10x_mb.dtsi 0 → 100644
View file @ 0890a264
/*
* Support for peripherals on the AXS10x mainboard (VDK version)
*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
axs10x_mb_vdk {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xe0000000 0x10000000>;
interrupt-parent = <&mb_intc>;
clocks {
apbclk: apbclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
};
ethernet@0x18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
interrupts = < 4 >;
interrupt-names = "macirq";
phy-mode = "rgmii";
snps,phy-addr = < 0 >; // VDK model phy address is 0
snps,pbl = < 32 >;
clocks = <&apbclk>;
clock-names = "stmmaceth";
};
ehci@0x40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
uart@0x20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <2403200>;
interrupts = <17>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart@0x21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <2403200>;
interrupts = <18>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart@0x22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <2403200>;
interrupts = <19>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
/* PGU output directly sent to virtual LCD screen; hdmi controller not modelled */
pgu@0x17000 {
compatible = "snps,arcpgufb";
reg = <0x17000 0x400>;
clock-frequency = <51000000>; /* PGU'clock is initated in init function */
/* interrupts = <5>; PGU interrupts not used, this vector is used for ps2 below */
};
/* VDK has additional ps2 keyboard/mouse interface integrated in LCD screen model */
ps2: ps2@e0017400 {
compatible = "snps,arc_ps2";
reg = <0x17400 0x14>;
interrupts = <5>;
interrupt-names = "arc_ps2_irq";
};
};
};
arch/arc/boot/dts/vdk_hs38.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
*
* ARC HS38 Virtual Development Kit (VDK)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "vdk_axc003.dtsi"
/include/ "vdk_axs10x_mb.dtsi"
/ {
compatible = "snps,axs103";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0";
};
};
arch/arc/boot/dts/vdk_hs38_smp.dts 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
*
* ARC HS38 Virtual Development Kit, SMP version (VDK)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "vdk_axc003_idu.dtsi"
/include/ "vdk_axs10x_mb.dtsi"
/ {
compatible = "snps,axs103";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0";
};
};
arch/arc/configs/axs101_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS101=y
CONFIG_ARC_CACHE_LINE_SHIFT=5
CONFIG_ARC_BUILTIN_DTB_NAME="axs101"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
arch/arc/configs/axs103_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
CONFIG_ARC_BUILTIN_DTB_NAME="axs103"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AXS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
arch/arc/configs/axs103_smp_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_BUILTIN_DTB_NAME="axs103_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AXS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
arch/arc/configs/nsim_700_defconfig
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
......@@ -22,9 +22,8 @@ CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_FPGA_LEGACY=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
......
arch/arc/configs/nsim_hs_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ISA_ARCV2=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_XZ_DEC=y
arch/arc/configs/nsim_hs_smp_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BOARD_ML509=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_XZ_DEC=y
arch/arc/configs/nsimosci_defconfig
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
......@@ -23,8 +23,7 @@ CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_FPGA_LEGACY=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
# CONFIG_COMPACTION is not set
CONFIG_NET=y
......
arch/arc/configs/nsimosci_hs_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ISA_ARCV2=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs"
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
CONFIG_NET_OSCI_LAN=y
CONFIG_INPUT_EVDEV=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
arch/arc/configs/nsimosci_hs_smp_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BOARD_ML509=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_HAS_LL64=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_OSCI_LAN=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_ARCPGU_RGB888=y
CONFIG_ARCPGU_DISPTYPE=0
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FTRACE=y
arch/arc/configs/tb10x_defconfig
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="tb10x"
CONFIG_SYSVIPC=y
......@@ -26,7 +26,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLOCK is not set
CONFIG_ARC_PLAT_TB10X=y
CONFIG_ARC_CACHE_LINE_SHIFT=5
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_STACK_NONEXEC=y
CONFIG_HZ=250
CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
......
arch/arc/configs/vdk_hs38_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38"
CONFIG_PREEMPT=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_SLRAM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NATIONAL_PHY=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_ARCPGU_RGB888=y
CONFIG_ARCPGU_DISPTYPE=0
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
arch/arc/configs/vdk_hs38_smp_defconfig 0 → 100644
View file @ 0890a264
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
# CONFIG_ARC_HAS_GRTC is not set
CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
CONFIG_PREEMPT=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_SLRAM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NATIONAL_PHY=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_ARCPGU_RGB888=y
CONFIG_ARCPGU_DISPTYPE=0
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
arch/arc/include/asm/Kbuild
View file @ 0890a264
generic-y += auxvec.h
generic-y += barrier.h
generic-y += bitsperlong.h
generic-y += bugs.h
generic-y += clkdev.h
......
arch/arc/include/asm/arcregs.h
View file @ 0890a264
......@@ -16,6 +16,8 @@
#define ARC_REG_PERIBASE_BCR 0x69
#define ARC_REG_FP_BCR 0x6B /* ARCompact: Single-Precision FPU */
#define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */
#define ARC_REG_FP_V2_BCR 0xc8 /* ARCv2 FPU */
#define ARC_REG_SLC_BCR 0xce
#define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */
#define ARC_REG_TIMERS_BCR 0x75
#define ARC_REG_AP_BCR 0x76
......@@ -31,6 +33,7 @@
#define ARC_REG_BPU_BCR 0xc0
#define ARC_REG_ISA_CFG_BCR 0xc1
#define ARC_REG_RTT_BCR 0xF2
#define ARC_REG_IRQ_BCR 0xF3
#define ARC_REG_SMART_BCR 0xFF
/* status32 Bits Positions */
......@@ -51,6 +54,7 @@
* [15: 8] = Exception Cause Code
* [ 7: 0] = Exception Parameters (for certain types only)
*/
#ifdef CONFIG_ISA_ARCOMPACT
#define ECR_V_MEM_ERR 0x01
#define ECR_V_INSN_ERR 0x02
#define ECR_V_MACH_CHK 0x20
......@@ -58,6 +62,15 @@
#define ECR_V_DTLB_MISS 0x22
#define ECR_V_PROTV 0x23
#define ECR_V_TRAP 0x25
#else
#define ECR_V_MEM_ERR 0x01
#define ECR_V_INSN_ERR 0x02
#define ECR_V_MACH_CHK 0x03
#define ECR_V_ITLB_MISS 0x04
#define ECR_V_DTLB_MISS 0x05
#define ECR_V_PROTV 0x06
#define ECR_V_TRAP 0x09
#endif
/* DTLB Miss and Protection Violation Cause Codes */
......@@ -76,9 +89,6 @@
#define ECR_C_BIT_DTLB_LD_MISS 8
#define ECR_C_BIT_DTLB_ST_MISS 9
/* Dummy ECR values for Interrupts */
#define event_IRQ1 0x0031abcd
#define event_IRQ2 0x0032abcd
/* Auxiliary registers */
#define AUX_IDENTITY 4
......@@ -204,9 +214,11 @@ struct bcr_identity {
struct bcr_isa {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad1:23, atomic1:1, ver:8;
unsigned int div_rem:4, pad2:4, ldd:1, unalign:1, atomic:1, be:1,
pad1:11, atomic1:1, ver:8;
#else
unsigned int ver:8, atomic1:1, pad1:23;
unsigned int ver:8, atomic1:1, pad1:11, be:1, atomic:1, unalign:1,
ldd:1, pad2:4, div_rem:4;
#endif
};
......@@ -269,11 +281,19 @@ struct bcr_fp_arcompact {
#endif
};
struct bcr_fp_arcv2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad2:15, dp:1, pad1:7, sp:1, ver:8;
#else
unsigned int ver:8, sp:1, pad1:7, dp:1, pad2:15;
#endif
};
struct bcr_timer {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad2:15, rtsc:1, pad1:6, t1:1, t0:1, ver:8;
unsigned int pad2:15, rtsc:1, pad1:5, rtc:1, t1:1, t0:1, ver:8;
#else
unsigned int ver:8, t0:1, t1:1, pad1:6, rtsc:1, pad2:15;
unsigned int ver:8, t0:1, t1:1, rtc:1, pad1:5, rtsc:1, pad2:15;
#endif
};
......@@ -285,6 +305,14 @@ struct bcr_bpu_arcompact {
#endif
};
struct bcr_bpu_arcv2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:6, fbe:2, tqe:2, ts:4, ft:1, rse:2, pte:3, bce:3, ver:8;
#else
unsigned int ver:8, bce:3, pte:3, rse:2, ft:1, ts:4, tqe:2, fbe:2, pad:6;
#endif
};
struct bcr_generic {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:24, ver:8;
......@@ -299,11 +327,12 @@ struct bcr_generic {
*/
struct cpuinfo_arc_mmu {
unsigned int ver, pg_sz, sets, ways, u_dtlb, u_itlb, num_tlb;
unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, u_dtlb:6, u_itlb:6;
unsigned int num_tlb:16, sets:12, ways:4;
};
struct cpuinfo_arc_cache {
unsigned int sz_k:8, line_len:8, assoc:4, ver:4, alias:1, vipt:1, pad:6;
unsigned int sz_k:14, line_len:8, assoc:4, ver:4, alias:1, vipt:1;
};
struct cpuinfo_arc_bpu {
......@@ -315,14 +344,13 @@ struct cpuinfo_arc_ccm {
};
struct cpuinfo_arc {
struct cpuinfo_arc_cache icache, dcache;
struct cpuinfo_arc_cache icache, dcache, slc;
struct cpuinfo_arc_mmu mmu;
struct cpuinfo_arc_bpu bpu;
struct bcr_identity core;
struct bcr_isa isa;
struct bcr_timer timers;
unsigned int vec_base;
unsigned int uncached_base;
struct cpuinfo_arc_ccm iccm, dccm;
struct {
unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
......@@ -336,6 +364,22 @@ struct cpuinfo_arc {
extern struct cpuinfo_arc cpuinfo_arc700[];
static inline int is_isa_arcv2(void)
{
return IS_ENABLED(CONFIG_ISA_ARCV2);
}
static inline int is_isa_arcompact(void)
{
return IS_ENABLED(CONFIG_ISA_ARCOMPACT);
}
#if defined(CONFIG_ISA_ARCOMPACT) && !defined(_CPU_DEFAULT_A7)
#error "Toolchain not configured for ARCompact builds"
#elif defined(CONFIG_ISA_ARCV2) && !defined(_CPU_DEFAULT_HS)
#error "Toolchain not configured for ARCv2 builds"
#endif
#endif /* __ASEMBLY__ */
#endif /* _ASM_ARC_ARCREGS_H */
arch/arc/include/asm/atomic.h
View file @ 0890a264
......@@ -23,13 +23,21 @@
#define atomic_set(v, i) (((v)->counter) = (i))
#ifdef CONFIG_ISA_ARCV2
#define PREFETCHW " prefetchw [%1] \n"
#else
#define PREFETCHW
#endif
#define ATOMIC_OP(op, c_op, asm_op) \
static inline void atomic_##op(int i, atomic_t *v) \
{ \
unsigned int temp; \
\
__asm__ __volatile__( \
"1: llock %0, [%1] \n" \
"1: \n" \
PREFETCHW \
" llock %0, [%1] \n" \
" " #asm_op " %0, %0, %2 \n" \
" scond %0, [%1] \n" \
" bnz 1b \n" \
......@@ -43,8 +51,16 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \
{ \
unsigned int temp; \
\
/* \
* Explicit full memory barrier needed before/after as \
* LLOCK/SCOND thmeselves don't provide any such semantics \
*/ \
smp_mb(); \
\
__asm__ __volatile__( \
"1: llock %0, [%1] \n" \
"1: \n" \
PREFETCHW \
" llock %0, [%1] \n" \
" " #asm_op " %0, %0, %2 \n" \
" scond %0, [%1] \n" \
" bnz 1b \n" \
......@@ -52,6 +68,8 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \
: "r"(&v->counter), "ir"(i) \
: "cc"); \
\
smp_mb(); \
\
return temp; \
}
......@@ -105,6 +123,9 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \
unsigned long flags; \
unsigned long temp; \
\
/* \
* spin lock/unlock provides the needed smp_mb() before/after \
*/ \
atomic_ops_lock(flags); \
temp = v->counter; \
temp c_op i; \
......@@ -142,9 +163,19 @@ ATOMIC_OP(and, &=, and)
#define __atomic_add_unless(v, a, u) \
({ \
int c, old; \
\
/* \
* Explicit full memory barrier needed before/after as \
* LLOCK/SCOND thmeselves don't provide any such semantics \
*/ \
smp_mb(); \
\
c = atomic_read(v); \
while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c)\
c = old; \
\
smp_mb(); \
\
c; \
})
......
arch/arc/include/asm/barrier.h 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_BARRIER_H
#define __ASM_BARRIER_H
#ifdef CONFIG_ISA_ARCV2
/*
* ARCv2 based HS38 cores are in-order issue, but still weakly ordered
* due to micro-arch buffering/queuing of load/store, cache hit vs. miss ...
*
* Explicit barrier provided by DMB instruction
* - Operand supports fine grained load/store/load+store semantics
* - Ensures that selected memory operation issued before it will complete
* before any subsequent memory operation of same type
* - DMB guarantees SMP as well as local barrier semantics
* (asm-generic/barrier.h ensures sane smp_*mb if not defined here, i.e.
* UP: barrier(), SMP: smp_*mb == *mb)
* - DSYNC provides DMB+completion_of_cache_bpu_maintenance_ops hence not needed
* in the general case. Plus it only provides full barrier.
*/
#define mb() asm volatile("dmb 3\n" : : : "memory")
#define rmb() asm volatile("dmb 1\n" : : : "memory")
#define wmb() asm volatile("dmb 2\n" : : : "memory")
#endif
#ifdef CONFIG_ISA_ARCOMPACT
/*
* ARCompact based cores (ARC700) only have SYNC instruction which is super
* heavy weight as it flushes the pipeline as well.
* There are no real SMP implementations of such cores.
*/
#define mb() asm volatile("sync\n" : : : "memory")
#endif
#include <asm-generic/barrier.h>
#endif
arch/arc/include/asm/bitops.h
View file @ 0890a264
This diff is collapsed.
arch/arc/include/asm/cache.h
View file @ 0890a264
......@@ -60,7 +60,7 @@ extern void read_decode_cache_bcr(void);
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
#define ARC_REG_IC_IVIL 0x19
#if defined(CONFIG_ARC_MMU_V3)
#if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4)
#define ARC_REG_IC_PTAG 0x1E
#endif
......@@ -74,12 +74,24 @@ extern void read_decode_cache_bcr(void);
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#if defined(CONFIG_ARC_MMU_V3)
#define ARC_REG_DC_PTAG 0x5C
#endif
/* Bit val in DC_CTRL */
#define DC_CTRL_INV_MODE_FLUSH 0x40
#define DC_CTRL_FLUSH_STATUS 0x100
/*System-level cache (L2 cache) related Auxiliary registers */
#define ARC_REG_SLC_CFG 0x901
#define ARC_REG_SLC_CTRL 0x903
#define ARC_REG_SLC_FLUSH 0x904
#define ARC_REG_SLC_INVALIDATE 0x905
#define ARC_REG_SLC_RGN_START 0x914
#define ARC_REG_SLC_RGN_END 0x916
/* Bit val in SLC_CONTROL */
#define SLC_CTRL_IM 0x040
#define SLC_CTRL_DISABLE 0x001
#define SLC_CTRL_BUSY 0x100
#define SLC_CTRL_RGN_OP_INV 0x200
#endif /* _ASM_CACHE_H */
arch/arc/include/asm/cacheflush.h
View file @ 0890a264
......@@ -34,9 +34,7 @@ void flush_cache_all(void);
void flush_icache_range(unsigned long start, unsigned long end);
void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len);
void __inv_icache_page(unsigned long paddr, unsigned long vaddr);
void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr);
#define __flush_dcache_page(p, v) \
___flush_dcache_page((unsigned long)p, (unsigned long)v)
void __flush_dcache_page(unsigned long paddr, unsigned long vaddr);
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
......
arch/arc/include/asm/cmpxchg.h
View file @ 0890a264
......@@ -10,6 +10,8 @@
#define __ASM_ARC_CMPXCHG_H
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/smp.h>
#ifdef CONFIG_ARC_HAS_LLSC
......@@ -19,16 +21,25 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
{
unsigned long prev;
/*
* Explicit full memory barrier needed before/after as
* LLOCK/SCOND thmeselves don't provide any such semantics
*/
smp_mb();
__asm__ __volatile__(
"1: llock %0, [%1] \n"
" brne %0, %2, 2f \n"
" scond %3, [%1] \n"
" bnz 1b \n"
"2: \n"
: "=&r"(prev)
: "r"(ptr), "ir"(expected),
"r"(new) /* can't be "ir". scond can't take limm for "b" */
: "cc");
: "=&r"(prev) /* Early clobber, to prevent reg reuse */
: "r"(ptr), /* Not "m": llock only supports reg direct addr mode */
"ir"(expected),
"r"(new) /* can't be "ir". scond can't take LIMM for "b" */
: "cc", "memory"); /* so that gcc knows memory is being written here */
smp_mb();
return prev;
}
......@@ -42,6 +53,9 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
int prev;
volatile unsigned long *p = ptr;
/*
* spin lock/unlock provide the needed smp_mb() before/after
*/
atomic_ops_lock(flags);
prev = *p;
if (prev == expected)
......@@ -77,12 +91,16 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
switch (size) {
case 4:
smp_mb();
__asm__ __volatile__(
" ex %0, [%1] \n"
: "+r"(val)
: "r"(ptr)
: "memory");
smp_mb();
return val;
}
return __xchg_bad_pointer();
......
arch/arc/include/asm/delay.h
View file @ 0890a264
......@@ -22,11 +22,10 @@
static inline void __delay(unsigned long loops)
{
__asm__ __volatile__(
"1: sub.f %0, %0, 1 \n"
" jpnz 1b \n"
: "+r"(loops)
:
: "cc");
" lp 1f \n"
" nop \n"
"1: \n"
: "+l"(loops));
}
extern void __bad_udelay(void);
......
arch/arc/include/asm/dma-mapping.h
View file @ 0890a264
......@@ -14,23 +14,6 @@
#include <asm-generic/dma-coherent.h>
#include <asm/cacheflush.h>
#ifndef CONFIG_ARC_PLAT_NEEDS_CPU_TO_DMA
/*
* dma_map_* API take cpu addresses, which is kernel logical address in the
* untranslated address space (0x8000_0000) based. The dma address (bus addr)
* ideally needs to be 0x0000_0000 based hence these glue routines.
* However given that intermediate bus bridges can ignore the high bit, we can
* do with these routines being no-ops.
* If a platform/device comes up which sriclty requires 0 based bus addr
* (e.g. AHB-PCI bridge on Angel4 board), then it can provide it's own versions
*/
#define plat_dma_addr_to_kernel(dev, addr) ((unsigned long)(addr))
#define plat_kernel_addr_to_dma(dev, ptr) ((dma_addr_t)(ptr))
#else
#include <plat/dma_addr.h>
#endif
void *dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp);
......@@ -94,7 +77,7 @@ dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction dir)
{
_dma_cache_sync((unsigned long)cpu_addr, size, dir);
return plat_kernel_addr_to_dma(dev, cpu_addr);
return (dma_addr_t)cpu_addr;
}
static inline void
......@@ -147,16 +130,14 @@ static inline void
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir)
{
_dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle), size,
DMA_FROM_DEVICE);
_dma_cache_sync(dma_handle, size, DMA_FROM_DEVICE);
}
static inline void
dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir)
{
_dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle), size,
DMA_TO_DEVICE);
_dma_cache_sync(dma_handle, size, DMA_TO_DEVICE);
}
static inline void
......@@ -164,8 +145,7 @@ dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
_dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle) + offset,
size, DMA_FROM_DEVICE);
_dma_cache_sync(dma_handle + offset, size, DMA_FROM_DEVICE);
}
static inline void
......@@ -173,8 +153,7 @@ dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
_dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle) + offset,
size, DMA_TO_DEVICE);
_dma_cache_sync(dma_handle + offset, size, DMA_TO_DEVICE);
}
static inline void
......
arch/arc/include/asm/elf.h
View file @ 0890a264
......@@ -15,6 +15,11 @@
/* These ELF defines belong to uapi but libc elf.h already defines them */
#define EM_ARCOMPACT 93
#define EM_ARCV2 195 /* ARCv2 Cores */
#define EM_ARC_INUSE (IS_ENABLED(CONFIG_ISA_ARCOMPACT) ? \
EM_ARCOMPACT : EM_ARCV2)
/* ARC Relocations (kernel Modules only) */
#define R_ARC_32 0x4
#define R_ARC_32_ME 0x1B
......
arch/arc/include/asm/entry-arcv2.h 0 → 100644
View file @ 0890a264
#ifndef __ASM_ARC_ENTRY_ARCV2_H
#define __ASM_ARC_ENTRY_ARCV2_H
#include <asm/asm-offsets.h>
#include <asm/irqflags-arcv2.h>
#include <asm/thread_info.h> /* For THREAD_SIZE */
/*------------------------------------------------------------------------*/
.macro INTERRUPT_PROLOGUE called_from
; Before jumping to Interrupt Vector, hardware micro-ops did following:
; 1. SP auto-switched to kernel mode stack
; 2. STATUS32.Z flag set to U mode at time of interrupt (U:1, K:0)
; 3. Auto saved: r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI, PC, STAT32
;
; Now manually save: r12, sp, fp, gp, r25
PUSH r12
; Saving pt_regs->sp correctly requires some extra work due to the way
; Auto stack switch works
; - U mode: retrieve it from AUX_USER_SP
; - K mode: add the offset from current SP where H/w starts auto push
;
; Utilize the fact that Z bit is set if Intr taken in U mode
mov.nz r9, sp
add.nz r9, r9, SZ_PT_REGS - PT_sp - 4
bnz 1f
lr r9, [AUX_USER_SP]
1:
PUSH r9 ; SP
PUSH fp
PUSH gp
#ifdef CONFIG_ARC_CURR_IN_REG
PUSH r25 ; user_r25
GET_CURR_TASK_ON_CPU r25
#else
sub sp, sp, 4
#endif
.ifnc \called_from, exception
sub sp, sp, 12 ; BTA/ECR/orig_r0 placeholder per pt_regs
.endif
.endm
/*------------------------------------------------------------------------*/
.macro INTERRUPT_EPILOGUE called_from
.ifnc \called_from, exception
add sp, sp, 12 ; skip BTA/ECR/orig_r0 placeholderss
.endif
#ifdef CONFIG_ARC_CURR_IN_REG
POP r25
#else
add sp, sp, 4
#endif
POP gp
POP fp
; Don't touch AUX_USER_SP if returning to K mode (Z bit set)
; (Z bit set on K mode is inverse of INTERRUPT_PROLOGUE)
add.z sp, sp, 4
bz 1f
POPAX AUX_USER_SP
1:
POP r12
.endm
/*------------------------------------------------------------------------*/
.macro EXCEPTION_PROLOGUE
; Before jumping to Exception Vector, hardware micro-ops did following:
; 1. SP auto-switched to kernel mode stack
; 2. STATUS32.Z flag set to U mode at time of interrupt (U:1,K:0)
;
; Now manually save the complete reg file
PUSH r9 ; freeup a register: slot of erstatus
PUSHAX eret
sub sp, sp, 12 ; skip JLI, LDI, EI
PUSH lp_count
PUSHAX lp_start
PUSHAX lp_end
PUSH blink
PUSH r11
PUSH r10
ld.as r9, [sp, 10] ; load stashed r9 (status32 stack slot)
lr r10, [erstatus]
st.as r10, [sp, 10] ; save status32 at it's right stack slot
PUSH r9
PUSH r8
PUSH r7
PUSH r6
PUSH r5
PUSH r4
PUSH r3
PUSH r2
PUSH r1
PUSH r0
; -- for interrupts, regs above are auto-saved by h/w in that order --
; Now do what ISR prologue does (manually save r12, sp, fp, gp, r25)
;
; Set Z flag if this was from U mode (expected by INTERRUPT_PROLOGUE)
; Although H/w exception micro-ops do set Z flag for U mode (just like
; for interrupts), it could get clobbered in case we soft land here from
; a TLB Miss exception handler (tlbex.S)
and r10, r10, STATUS_U_MASK
xor.f 0, r10, STATUS_U_MASK
INTERRUPT_PROLOGUE exception
PUSHAX erbta
PUSHAX ecr ; r9 contains ECR, expected by EV_Trap
PUSH r0 ; orig_r0
.endm
/*------------------------------------------------------------------------*/
.macro EXCEPTION_EPILOGUE
; Assumes r0 has PT_status32
btst r0, STATUS_U_BIT ; Z flag set if K, used in INTERRUPT_EPILOGUE
add sp, sp, 8 ; orig_r0/ECR don't need restoring
POPAX erbta
INTERRUPT_EPILOGUE exception
POP r0
POP r1
POP r2
POP r3
POP r4
POP r5
POP r6
POP r7
POP r8
POP r9
POP r10
POP r11
POP blink
POPAX lp_end
POPAX lp_start
POP r9
mov lp_count, r9
add sp, sp, 12 ; skip JLI, LDI, EI
POPAX eret
POPAX erstatus
ld.as r9, [sp, -12] ; reload r9 which got clobbered
.endm
.macro FAKE_RET_FROM_EXCPN
lr r9, [status32]
bic r9, r9, (STATUS_U_MASK|STATUS_DE_MASK|STATUS_AE_MASK)
or r9, r9, (STATUS_L_MASK|STATUS_IE_MASK)
kflag r9
.endm
/* Get thread_info of "current" tsk */
.macro GET_CURR_THR_INFO_FROM_SP reg
bmskn \reg, sp, THREAD_SHIFT - 1
.endm
/* Get CPU-ID of this core */
.macro GET_CPU_ID reg
lr \reg, [identity]
xbfu \reg, \reg, 0xE8 /* 00111 01000 */
/* M = 8-1 N = 8 */
.endm
#endif
arch/arc/include/asm/entry-compact.h 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Vineetg: March 2009 (Supporting 2 levels of Interrupts)
* Stack switching code can no longer reliably rely on the fact that
* if we are NOT in user mode, stack is switched to kernel mode.
* e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
* it's prologue including stack switching from user mode
*
* Vineetg: Aug 28th 2008: Bug #94984
* -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
* Normally CPU does this automatically, however when doing FAKE rtie,
* we also need to explicitly do this. The problem in macros
* FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
* was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context
*
* Vineetg: May 5th 2008
* -Modified CALLEE_REG save/restore macros to handle the fact that
* r25 contains the kernel current task ptr
* - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
* - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
* address Write back load ld.ab instead of seperate ld/add instn
*
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
*/
#ifndef __ASM_ARC_ENTRY_COMPACT_H
#define __ASM_ARC_ENTRY_COMPACT_H
#include <asm/asm-offsets.h>
#include <asm/irqflags-compact.h>
#include <asm/thread_info.h> /* For THREAD_SIZE */
/*--------------------------------------------------------------
* Switch to Kernel Mode stack if SP points to User Mode stack
*
* Entry : r9 contains pre-IRQ/exception/trap status32
* Exit : SP set to K mode stack
* SP at the time of entry (K/U) saved @ pt_regs->sp
* Clobbers: r9
*-------------------------------------------------------------*/
.macro SWITCH_TO_KERNEL_STK
/* User Mode when this happened ? Yes: Proceed to switch stack */
bbit1 r9, STATUS_U_BIT, 88f
/* OK we were already in kernel mode when this event happened, thus can
* assume SP is kernel mode SP. _NO_ need to do any stack switching
*/
#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
/* However....
* If Level 2 Interrupts enabled, we may end up with a corner case:
* 1. User Task executing
* 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
* 3. But before it could switch SP from USER to KERNEL stack
* a L2 IRQ "Interrupts" L1
* Thay way although L2 IRQ happened in Kernel mode, stack is still
* not switched.
* To handle this, we may need to switch stack even if in kernel mode
* provided SP has values in range of USER mode stack ( < 0x7000_0000 )
*/
brlo sp, VMALLOC_START, 88f
/* TODO: vineetg:
* We need to be a bit more cautious here. What if a kernel bug in
* L1 ISR, caused SP to go whaco (some small value which looks like
* USER stk) and then we take L2 ISR.
* Above brlo alone would treat it as a valid L1-L2 sceanrio
* instead of shouting alound
* The only feasible way is to make sure this L2 happened in
* L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
* L1 ISR before it switches stack
*/
#endif
/*------Intr/Ecxp happened in kernel mode, SP already setup ------ */
/* save it nevertheless @ pt_regs->sp for uniformity */
b.d 66f
st sp, [sp, PT_sp - SZ_PT_REGS]
88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */
GET_CURR_TASK_ON_CPU r9
/* With current tsk in r9, get it's kernel mode stack base */
GET_TSK_STACK_BASE r9, r9
/* save U mode SP @ pt_regs->sp */
st sp, [r9, PT_sp - SZ_PT_REGS]
/* final SP switch */
mov sp, r9
66:
.endm
/*------------------------------------------------------------
* "FAKE" a rtie to return from CPU Exception context
* This is to re-enable Exceptions within exception
* Look at EV_ProtV to see how this is actually used
*-------------------------------------------------------------*/
.macro FAKE_RET_FROM_EXCPN
ld r9, [sp, PT_status32]
bic r9, r9, (STATUS_U_MASK|STATUS_DE_MASK)
bset r9, r9, STATUS_L_BIT
sr r9, [erstatus]
mov r9, 55f
sr r9, [eret]
rtie
55:
.endm
/*--------------------------------------------------------------
* For early Exception/ISR Prologue, a core reg is temporarily needed to
* code the rest of prolog (stack switching). This is done by stashing
* it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP).
*
* Before saving the full regfile - this reg is restored back, only
* to be saved again on kernel mode stack, as part of pt_regs.
*-------------------------------------------------------------*/
.macro PROLOG_FREEUP_REG reg, mem
#ifdef CONFIG_SMP
sr \reg, [ARC_REG_SCRATCH_DATA0]
#else
st \reg, [\mem]
#endif
.endm
.macro PROLOG_RESTORE_REG reg, mem
#ifdef CONFIG_SMP
lr \reg, [ARC_REG_SCRATCH_DATA0]
#else
ld \reg, [\mem]
#endif
.endm
/*--------------------------------------------------------------
* Exception Entry prologue
* -Switches stack to K mode (if not already)
* -Saves the register file
*
* After this it is safe to call the "C" handlers
*-------------------------------------------------------------*/
.macro EXCEPTION_PROLOGUE
/* Need at least 1 reg to code the early exception prologue */
PROLOG_FREEUP_REG r9, @ex_saved_reg1
/* U/K mode at time of exception (stack not switched if already K) */
lr r9, [erstatus]
/* ARC700 doesn't provide auto-stack switching */
SWITCH_TO_KERNEL_STK
#ifdef CONFIG_ARC_CURR_IN_REG
/* Treat r25 as scratch reg (save on stack) and load with "current" */
PUSH r25
GET_CURR_TASK_ON_CPU r25
#else
sub sp, sp, 4
#endif
st.a r0, [sp, -8] /* orig_r0 needed for syscall (skip ECR slot) */
sub sp, sp, 4 /* skip pt_regs->sp, already saved above */
/* Restore r9 used to code the early prologue */
PROLOG_RESTORE_REG r9, @ex_saved_reg1
/* now we are ready to save the regfile */
SAVE_R0_TO_R12
PUSH gp
PUSH fp
PUSH blink
PUSHAX eret
PUSHAX erstatus
PUSH lp_count
PUSHAX lp_end
PUSHAX lp_start
PUSHAX erbta
lr r9, [ecr]
st r9, [sp, PT_event] /* EV_Trap expects r9 to have ECR */
.endm
/*--------------------------------------------------------------
* Restore all registers used by system call or Exceptions
* SP should always be pointing to the next free stack element
* when entering this macro.
*
* NOTE:
*
* It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
* for memory load operations. If used in that way interrupts are deffered
* by hardware and that is not good.
*-------------------------------------------------------------*/
.macro EXCEPTION_EPILOGUE
POPAX erbta
POPAX lp_start
POPAX lp_end
POP r9
mov lp_count, r9 ;LD to lp_count is not allowed
POPAX erstatus
POPAX eret
POP blink
POP fp
POP gp
RESTORE_R12_TO_R0
ld sp, [sp] /* restore original sp */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm
/* Dummy ECR values for Interrupts */
#define event_IRQ1 0x0031abcd
#define event_IRQ2 0x0032abcd
.macro INTERRUPT_PROLOGUE LVL
/* free up r9 as scratchpad */
PROLOG_FREEUP_REG r9, @int\LVL\()_saved_reg
/* Which mode (user/kernel) was the system in when intr occured */
lr r9, [status32_l\LVL\()]
SWITCH_TO_KERNEL_STK
#ifdef CONFIG_ARC_CURR_IN_REG
/* Treat r25 as scratch reg (save on stack) and load with "current" */
PUSH r25
GET_CURR_TASK_ON_CPU r25
#else
sub sp, sp, 4
#endif
PUSH 0x003\LVL\()abcd /* Dummy ECR */
sub sp, sp, 8 /* skip orig_r0 (not needed)
skip pt_regs->sp, already saved above */
/* Restore r9 used to code the early prologue */
PROLOG_RESTORE_REG r9, @int\LVL\()_saved_reg
SAVE_R0_TO_R12
PUSH gp
PUSH fp
PUSH blink
PUSH ilink\LVL\()
PUSHAX status32_l\LVL\()
PUSH lp_count
PUSHAX lp_end
PUSHAX lp_start
PUSHAX bta_l\LVL\()
.endm
/*--------------------------------------------------------------
* Restore all registers used by interrupt handlers.
*
* NOTE:
*
* It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
* for memory load operations. If used in that way interrupts are deffered
* by hardware and that is not good.
*-------------------------------------------------------------*/
.macro INTERRUPT_EPILOGUE LVL
POPAX bta_l\LVL\()
POPAX lp_start
POPAX lp_end
POP r9
mov lp_count, r9 ;LD to lp_count is not allowed
POPAX status32_l\LVL\()
POP ilink\LVL\()
POP blink
POP fp
POP gp
RESTORE_R12_TO_R0
ld sp, [sp] /* restore original sp */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm
/* Get thread_info of "current" tsk */
.macro GET_CURR_THR_INFO_FROM_SP reg
bic \reg, sp, (THREAD_SIZE - 1)
.endm
/* Get CPU-ID of this core */
.macro GET_CPU_ID reg
lr \reg, [identity]
lsr \reg, \reg, 8
bmsk \reg, \reg, 7
.endm
#endif /* __ASM_ARC_ENTRY_COMPACT_H */
arch/arc/include/asm/entry.h
View file @ 0890a264
This diff is collapsed.
arch/arc/include/asm/io.h
View file @ 0890a264
......@@ -99,9 +99,45 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
}
#define readb_relaxed readb
#define readw_relaxed readw
#define readl_relaxed readl
#ifdef CONFIG_ISA_ARCV2
#include <asm/barrier.h>
#define __iormb() rmb()
#define __iowmb() wmb()
#else
#define __iormb() do { } while (0)
#define __iowmb() do { } while (0)
#endif
/*
* MMIO can also get buffered/optimized in micro-arch, so barriers needed
* Based on ARM model for the typical use case
*
* <ST [DMA buffer]>
* <writel MMIO "go" reg>
* or:
* <readl MMIO "status" reg>
* <LD [DMA buffer]>
*
* http://lkml.kernel.org/r/20150622133656.GG1583@arm.com
*/
#define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; })
#define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; })
#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; })
#define writeb(v,c) ({ __iowmb(); writeb_relaxed(v,c); })
#define writew(v,c) ({ __iowmb(); writew_relaxed(v,c); })
#define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); })
/*
* Relaxed API for drivers which can handle any ordering themselves
*/
#define readb_relaxed(c) __raw_readb(c)
#define readw_relaxed(c) __raw_readw(c)
#define readl_relaxed(c) __raw_readl(c)
#define writeb_relaxed(v,c) __raw_writeb(v,c)
#define writew_relaxed(v,c) __raw_writew(v,c)
#define writel_relaxed(v,c) __raw_writel(v,c)
#include <asm-generic/io.h>
......
arch/arc/include/asm/irq.h
View file @ 0890a264
......@@ -13,8 +13,14 @@
#define NR_IRQS 128 /* allow some CPU external IRQ handling */
/* Platform Independent IRQs */
#ifdef CONFIG_ISA_ARCOMPACT
#define TIMER0_IRQ 3
#define TIMER1_IRQ 4
#else
#define TIMER0_IRQ 16
#define TIMER1_IRQ 17
#define IPI_IRQ 19
#endif
#include <linux/interrupt.h>
#include <asm-generic/irq.h>
......
arch/arc/include/asm/irqflags-arcv2.h 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_IRQFLAGS_ARCV2_H
#define __ASM_IRQFLAGS_ARCV2_H
#include <asm/arcregs.h>
/* status32 Bits */
#define STATUS_AD_BIT 19 /* Disable Align chk: core supports non-aligned */
#define STATUS_IE_BIT 31
#define STATUS_AD_MASK (1<<STATUS_AD_BIT)
#define STATUS_IE_MASK (1<<STATUS_IE_BIT)
#define AUX_USER_SP 0x00D
#define AUX_IRQ_CTRL 0x00E
#define AUX_IRQ_ACT 0x043 /* Active Intr across all levels */
#define AUX_IRQ_LVL_PEND 0x200 /* Pending Intr across all levels */
#define AUX_IRQ_PRIORITY 0x206
#define ICAUSE 0x40a
#define AUX_IRQ_SELECT 0x40b
#define AUX_IRQ_ENABLE 0x40c
/* Was Intr taken in User Mode */
#define AUX_IRQ_ACT_BIT_U 31
/* 0 is highest level, but taken by FIRQs, if present in design */
#define ARCV2_IRQ_DEF_PRIO 0
/* seed value for status register */
#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \
(ARCV2_IRQ_DEF_PRIO << 1))
#ifndef __ASSEMBLY__
/*
* Save IRQ state and disable IRQs
*/
static inline long arch_local_irq_save(void)
{
unsigned long flags;
__asm__ __volatile__(" clri %0 \n" : "=r" (flags) : : "memory");
return flags;
}
/*
* restore saved IRQ state
*/
static inline void arch_local_irq_restore(unsigned long flags)
{
__asm__ __volatile__(" seti %0 \n" : : "r" (flags) : "memory");
}
/*
* Unconditionally Enable IRQs
*/
static inline void arch_local_irq_enable(void)
{
unsigned int irqact = read_aux_reg(AUX_IRQ_ACT);
if (irqact & 0xffff)
write_aux_reg(AUX_IRQ_ACT, irqact & ~0xffff);
__asm__ __volatile__(" seti \n" : : : "memory");
}
/*
* Unconditionally Disable IRQs
*/
static inline void arch_local_irq_disable(void)
{
__asm__ __volatile__(" clri \n" : : : "memory");
}
/*
* save IRQ state
*/
static inline long arch_local_save_flags(void)
{
unsigned long temp;
__asm__ __volatile__(
" lr %0, [status32] \n"
: "=&r"(temp)
:
: "memory");
return temp;
}
/*
* Query IRQ state
*/
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
return !(flags & (STATUS_IE_MASK));
}
static inline int arch_irqs_disabled(void)
{
return arch_irqs_disabled_flags(arch_local_save_flags());
}
#else
.macro IRQ_DISABLE scratch
clri
.endm
.macro IRQ_ENABLE scratch
seti
.endm
#endif /* __ASSEMBLY__ */
#endif
arch/arc/include/asm/irqflags-compact.h 0 → 100644
View file @ 0890a264
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_IRQFLAGS_ARCOMPACT_H
#define __ASM_IRQFLAGS_ARCOMPACT_H
/* vineetg: March 2010 : local_irq_save( ) optimisation
* -Remove explicit mov of current status32 into reg, that is not needed
* -Use BIC insn instead of INVERTED + AND
* -Conditionally disable interrupts (if they are not enabled, don't disable)
*/
#include <asm/arcregs.h>
/* status32 Reg bits related to Interrupt Handling */
#define STATUS_E1_BIT 1 /* Int 1 enable */
#define STATUS_E2_BIT 2 /* Int 2 enable */
#define STATUS_A1_BIT 3 /* Int 1 active */
#define STATUS_A2_BIT 4 /* Int 2 active */
#define STATUS_E1_MASK (1<<STATUS_E1_BIT)
#define STATUS_E2_MASK (1<<STATUS_E2_BIT)
#define STATUS_A1_MASK (1<<STATUS_A1_BIT)
#define STATUS_A2_MASK (1<<STATUS_A2_BIT)
#define STATUS_IE_MASK (STATUS_E1_MASK | STATUS_E2_MASK)
/* Other Interrupt Handling related Aux regs */
#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */
#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */
#define AUX_IRQ_LV12 0x43 /* interrupt level register */
#define AUX_IENABLE 0x40c
#define AUX_ITRIGGER 0x40d
#define AUX_IPULSE 0x415
#define ISA_INIT_STATUS_BITS STATUS_IE_MASK
#ifndef __ASSEMBLY__
/******************************************************************
* IRQ Control Macros
*
* All of them have "memory" clobber (compiler barrier) which is needed to
* ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available)
* are redone after IRQs are re-enabled (and gcc doesn't reuse stale register)
*
* Noted at the time of Abilis Timer List corruption
* Orig Bug + Rejected solution : https://lkml.org/lkml/2013/3/29/67
* Reasoning : https://lkml.org/lkml/2013/4/8/15
*
******************************************************************/
/*
* Save IRQ state and disable IRQs
*/
static inline long arch_local_irq_save(void)
{
unsigned long temp, flags;
__asm__ __volatile__(
" lr %1, [status32] \n"
" bic %0, %1, %2 \n"
" and.f 0, %1, %2 \n"
" flag.nz %0 \n"
: "=r"(temp), "=r"(flags)
: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
: "memory", "cc");
return flags;
}
/*
* restore saved IRQ state
*/
static inline void arch_local_irq_restore(unsigned long flags)
{
__asm__ __volatile__(
" flag %0 \n"
:
: "r"(flags)
: "memory");
}
/*
* Unconditionally Enable IRQs
*/
extern void arch_local_irq_enable(void);
/*
* Unconditionally Disable IRQs
*/
static inline void arch_local_irq_disable(void)
{
unsigned long temp;
__asm__ __volatile__(
" lr %0, [status32] \n"
" and %0, %0, %1 \n"
" flag %0 \n"
: "=&r"(temp)
: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK))
: "memory");
}
/*
* save IRQ state
*/
static inline long arch_local_save_flags(void)
{
unsigned long temp;
__asm__ __volatile__(
" lr %0, [status32] \n"
: "=&r"(temp)
:
: "memory");
return temp;
}
/*
* Query IRQ state
*/
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
return !(flags & (STATUS_E1_MASK
#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
| STATUS_E2_MASK
#endif
));
}
static inline int arch_irqs_disabled(void)
{
return arch_irqs_disabled_flags(arch_local_save_flags());
}
#else
#ifdef CONFIG_TRACE_IRQFLAGS
.macro TRACE_ASM_IRQ_DISABLE
bl trace_hardirqs_off
.endm
.macro TRACE_ASM_IRQ_ENABLE
bl trace_hardirqs_on
.endm
#else
.macro TRACE_ASM_IRQ_DISABLE
.endm
.macro TRACE_ASM_IRQ_ENABLE
.endm
#endif
.macro IRQ_DISABLE scratch
lr \scratch, [status32]
bic \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
flag \scratch
TRACE_ASM_IRQ_DISABLE
.endm
.macro IRQ_ENABLE scratch
lr \scratch, [status32]
or \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
flag \scratch
TRACE_ASM_IRQ_ENABLE
.endm
#endif /* __ASSEMBLY__ */
#endif
arch/arc/include/asm/irqflags.h
View file @ 0890a264
This diff is collapsed.
arch/arc/include/asm/mcip.h 0 → 100644
View file @ 0890a264
/*
* ARConnect IP Support (Multi core enabler: Cross core IPI, RTC ...)
*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_MCIP_H
#define __ASM_MCIP_H
#ifdef CONFIG_ISA_ARCV2
#include <asm/arcregs.h>
#define ARC_REG_MCIP_BCR 0x0d0
#define ARC_REG_MCIP_CMD 0x600
#define ARC_REG_MCIP_WDATA 0x601
#define ARC_REG_MCIP_READBACK 0x602
struct mcip_cmd {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:8, param:16, cmd:8;
#else
unsigned int cmd:8, param:16, pad:8;
#endif
#define CMD_INTRPT_GENERATE_IRQ 0x01
#define CMD_INTRPT_GENERATE_ACK 0x02
#define CMD_INTRPT_READ_STATUS 0x03
#define CMD_INTRPT_CHECK_SOURCE 0x04
/* Semaphore Commands */
#define CMD_SEMA_CLAIM_AND_READ 0x11
#define CMD_SEMA_RELEASE 0x12
#define CMD_DEBUG_SET_MASK 0x34
#define CMD_DEBUG_SET_SELECT 0x36
#define CMD_GRTC_READ_LO 0x42
#define CMD_GRTC_READ_HI 0x43
#define CMD_IDU_ENABLE 0x71
#define CMD_IDU_DISABLE 0x72
#define CMD_IDU_SET_MODE 0x74
#define CMD_IDU_SET_DEST 0x76
#define CMD_IDU_SET_MASK 0x7C
#define IDU_M_TRIG_LEVEL 0x0
#define IDU_M_TRIG_EDGE 0x1
#define IDU_M_DISTRI_RR 0x0
#define IDU_M_DISTRI_DEST 0x2
};
/*
* MCIP programming model
*
* - Simple commands write {cmd:8,param:16} to MCIP_CMD aux reg
* (param could be irq, common_irq, core_id ...)
* - More involved commands setup MCIP_WDATA with cmd specific data
* before invoking the simple command
*/
static inline void __mcip_cmd(unsigned int cmd, unsigned int param)
{
struct mcip_cmd buf;
buf.pad = 0;
buf.cmd = cmd;
buf.param = param;
WRITE_AUX(ARC_REG_MCIP_CMD, buf);
}
/*
* Setup additional data for a cmd
* Callers need to lock to ensure atomicity
*/
static inline void __mcip_cmd_data(unsigned int cmd, unsigned int param,
unsigned int data)
{
write_aux_reg(ARC_REG_MCIP_WDATA, data);
__mcip_cmd(cmd, param);
}
extern void mcip_init_early_smp(void);
extern void mcip_init_smp(unsigned int cpu);
#endif
#endif
arch/arc/include/asm/mmu.h
View file @ 0890a264
This diff is collapsed.
arch/arc/include/asm/pgtable.h
View file @ 0890a264
......@@ -72,8 +72,18 @@
#define _PAGE_READ (1<<3) /* Page has user read perm (H) */
#define _PAGE_ACCESSED (1<<4) /* Page is accessed (S) */
#define _PAGE_MODIFIED (1<<5) /* Page modified (dirty) (S) */
#if (CONFIG_ARC_MMU_VER >= 4)
#define _PAGE_WTHRU (1<<7) /* Page cache mode write-thru (H) */
#endif
#define _PAGE_GLOBAL (1<<8) /* Page is global (H) */
#define _PAGE_PRESENT (1<<9) /* TLB entry is valid (H) */
#if (CONFIG_ARC_MMU_VER >= 4)
#define _PAGE_SZ (1<<10) /* Page Size indicator (H) */
#endif
#define _PAGE_SHARED_CODE (1<<11) /* Shared Code page with cmn vaddr
usable for shared TLB entries (H) */
#endif
......
arch/arc/include/asm/processor.h
View file @ 0890a264
This diff is collapsed.
arch/arc/include/asm/ptrace.h
View file @ 0890a264
This diff is collapsed.
arch/arc/include/asm/spinlock.h
View file @ 0890a264
This diff is collapsed.
arch/arc/include/asm/thread_info.h
View file @ 0890a264
......@@ -25,6 +25,7 @@
#endif
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
#define THREAD_SHIFT (PAGE_SHIFT << THREAD_SIZE_ORDER)
#ifndef __ASSEMBLY__
......
arch/arc/include/asm/uaccess.h
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/Makefile
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/asm-offsets.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/devtree.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/entry-arcv2.S 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/entry-compact.S 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/entry.S
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/head.S
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/intc-arcv2.c 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/intc-compact.c 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/irq.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/mcip.c 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/perf_event.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/process.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/ptrace.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/setup.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/signal.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/smp.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/stacktrace.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/time.c
View file @ 0890a264
This diff is collapsed.
arch/arc/kernel/troubleshoot.c
View file @ 0890a264
This diff is collapsed.
arch/arc/lib/Makefile
View file @ 0890a264
This diff is collapsed.
arch/arc/lib/memcmp.S
View file @ 0890a264
This diff is collapsed.
arch/arc/lib/memcpy-archs.S 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/lib/memset-archs.S 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/lib/strcmp-archs.S 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/mm/Makefile
View file @ 0890a264
This diff is collapsed.
arch/arc/mm/dma.c
View file @ 0890a264
This diff is collapsed.
arch/arc/mm/tlb.c
View file @ 0890a264
This diff is collapsed.
arch/arc/mm/tlbex.S
View file @ 0890a264
This diff is collapsed.
arch/arc/plat-arcfpga/include/plat/smp.h deleted 100644 → 0
View file @ 05a8256c
This diff is collapsed.
arch/arc/plat-arcfpga/smp.c deleted 100644 → 0
View file @ 05a8256c
This diff is collapsed.
arch/arc/plat-axs10x/Kconfig 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/plat-axs10x/Makefile 0 → 100644
View file @ 0890a264
This diff is collapsed.
arch/arc/plat-axs10x/axs10x.c 0 → 100644
View file @ 0890a264
This diff is collapsed.
include/asm-generic/barrier.h
View file @ 0890a264
This diff is collapsed.
scripts/sortextable.c
View file @ 0890a264
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7