Commit 08b903b5 authored by Misha Nasledov's avatar Misha Nasledov Committed by Christoph Hellwig

nvme: ignore subnqn for ADATA SX6000LNP

The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a
system with more than one of these SSDs will only have one usable.

[ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C).
[ 0.943017] nvme nvme1: Removing after probe failure status: -22

02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)

There are no firmware updates available from the vendor, unfortunately.
Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves
the issue, and they all work after this patch:

/dev/nvme0n1     2J1120050420         ADATA SX6000LNP [...]
/dev/nvme1n1     2J1120050540         ADATA SX6000LNP [...]
Signed-off-by: default avatarMisha Nasledov <misha@nasledov.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
parent 77ce56e2
...@@ -3029,6 +3029,8 @@ static const struct pci_device_id nvme_id_table[] = { ...@@ -3029,6 +3029,8 @@ static const struct pci_device_id nvme_id_table[] = {
.driver_data = NVME_QUIRK_LIGHTNVM, }, .driver_data = NVME_QUIRK_LIGHTNVM, },
{ PCI_DEVICE(0x1d1d, 0x2601), /* CNEX Granby */ { PCI_DEVICE(0x1d1d, 0x2601), /* CNEX Granby */
.driver_data = NVME_QUIRK_LIGHTNVM, }, .driver_data = NVME_QUIRK_LIGHTNVM, },
{ PCI_DEVICE(0x10ec, 0x5762), /* ADATA SX6000LNP */
.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) },
{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001) }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001) },
{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2003) }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2003) },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment