Commit 094d05dc authored by Sujith's avatar Sujith Committed by John W. Linville

mac80211: Fix HT channel selection

HT management is done differently for AP and STA modes, unify
to just the ->config() callback since HT is fundamentally a
PHY property and cannot be per-BSS.

Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote
the channel type ( NO_HT, HT20, HT40+, HT40- ).
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 420e7fab
......@@ -623,37 +623,40 @@ static int ath_get_channel(struct ath_softc *sc,
return -1;
}
/* ext_chan_offset: (-1, 0, 1) (below, none, above) */
static u32 ath_get_extchanmode(struct ath_softc *sc,
struct ieee80211_channel *chan,
int ext_chan_offset,
enum ath9k_ht_macmode tx_chan_width)
enum nl80211_channel_type channel_type)
{
u32 chanmode = 0;
switch (chan->band) {
case IEEE80211_BAND_2GHZ:
if ((ext_chan_offset == 0) &&
(tx_chan_width == ATH9K_HT_MACMODE_20))
switch(channel_type) {
case NL80211_CHAN_NO_HT:
case NL80211_CHAN_HT20:
chanmode = CHANNEL_G_HT20;
if ((ext_chan_offset == 1) &&
(tx_chan_width == ATH9K_HT_MACMODE_2040))
break;
case NL80211_CHAN_HT40PLUS:
chanmode = CHANNEL_G_HT40PLUS;
if ((ext_chan_offset == -1) &&
(tx_chan_width == ATH9K_HT_MACMODE_2040))
break;
case NL80211_CHAN_HT40MINUS:
chanmode = CHANNEL_G_HT40MINUS;
break;
}
break;
case IEEE80211_BAND_5GHZ:
if ((ext_chan_offset == 0) &&
(tx_chan_width == ATH9K_HT_MACMODE_20))
switch(channel_type) {
case NL80211_CHAN_NO_HT:
case NL80211_CHAN_HT20:
chanmode = CHANNEL_A_HT20;
if ((ext_chan_offset == 1) &&
(tx_chan_width == ATH9K_HT_MACMODE_2040))
break;
case NL80211_CHAN_HT40PLUS:
chanmode = CHANNEL_A_HT40PLUS;
if ((ext_chan_offset == -1) &&
(tx_chan_width == ATH9K_HT_MACMODE_2040))
break;
case NL80211_CHAN_HT40MINUS:
chanmode = CHANNEL_A_HT40MINUS;
break;
}
break;
default:
break;
......@@ -829,45 +832,15 @@ static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
}
static void ath9k_ht_conf(struct ath_softc *sc,
struct ieee80211_bss_conf *bss_conf)
{
if (sc->hw->conf.ht.enabled) {
if (bss_conf->ht.width_40_ok)
sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
else
sc->tx_chan_width = ATH9K_HT_MACMODE_20;
ath9k_hw_set11nmac2040(sc->sc_ah, sc->tx_chan_width);
DPRINTF(sc, ATH_DBG_CONFIG,
"BSS Changed HT, chanwidth: %d\n", sc->tx_chan_width);
}
}
static inline int ath_sec_offset(u8 ext_offset)
{
if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE)
return 0;
else if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
return 1;
else if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
return -1;
return 0;
}
static void ath9k_bss_assoc_info(struct ath_softc *sc,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf)
{
struct ieee80211_hw *hw = sc->hw;
struct ieee80211_channel *curchan = hw->conf.channel;
struct ath_vap *avp = (void *)vif->drv_priv;
int pos;
if (bss_conf->assoc) {
DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d\n", bss_conf->aid);
DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
bss_conf->aid, sc->sc_curbssid);
/* New association, store aid */
if (avp->av_opmode == NL80211_IFTYPE_STATION) {
......@@ -886,40 +859,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
/* Update chainmask */
ath_update_chainmask(sc, hw->conf.ht.enabled);
DPRINTF(sc, ATH_DBG_CONFIG,
"bssid %pM aid 0x%x\n",
sc->sc_curbssid, sc->sc_curaid);
pos = ath_get_channel(sc, curchan);
if (pos == -1) {
DPRINTF(sc, ATH_DBG_FATAL,
"Invalid channel: %d\n", curchan->center_freq);
return;
}
if (hw->conf.ht.enabled) {
int offset =
ath_sec_offset(bss_conf->ht.secondary_channel_offset);
sc->tx_chan_width = (bss_conf->ht.width_40_ok) ?
ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20;
sc->sc_ah->ah_channels[pos].chanmode =
ath_get_extchanmode(sc, curchan,
offset, sc->tx_chan_width);
} else {
sc->sc_ah->ah_channels[pos].chanmode =
(curchan->band == IEEE80211_BAND_2GHZ) ?
CHANNEL_G : CHANNEL_A;
}
/* set h/w channel */
if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel: %d\n",
curchan->center_freq);
/* Start ANI */
mod_timer(&sc->sc_ani.timer,
jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
......@@ -2146,7 +2085,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
struct ath_softc *sc = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
if (changed & (IEEE80211_CONF_CHANGE_CHANNEL |
IEEE80211_CONF_CHANGE_HT)) {
struct ieee80211_channel *curchan = hw->conf.channel;
int pos;
......@@ -2165,25 +2105,23 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
(curchan->band == IEEE80211_BAND_2GHZ) ?
CHANNEL_G : CHANNEL_A;
if ((sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) &&
(conf->ht.enabled)) {
sc->tx_chan_width = (!!conf->ht.sec_chan_offset) ?
ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20;
if (conf->ht.enabled) {
if (conf->ht.channel_type == NL80211_CHAN_HT40PLUS ||
conf->ht.channel_type == NL80211_CHAN_HT40MINUS)
sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
sc->sc_ah->ah_channels[pos].chanmode =
ath_get_extchanmode(sc, curchan,
conf->ht.sec_chan_offset,
sc->tx_chan_width);
conf->ht.channel_type);
}
if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
return -EINVAL;
}
}
if (changed & IEEE80211_CONF_CHANGE_HT)
ath_update_chainmask(sc, conf->ht.enabled);
}
if (changed & IEEE80211_CONF_CHANGE_POWER)
sc->sc_config.txpowlimit = 2 * conf->power_level;
......@@ -2417,9 +2355,6 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
}
if (changed & BSS_CHANGED_HT)
ath9k_ht_conf(sc, bss_conf);
if (changed & BSS_CHANGED_ASSOC) {
DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
bss_conf->assoc);
......
......@@ -515,19 +515,27 @@ static void iwl_ht_conf(struct iwl_priv *priv,
iwl_conf->supported_chan_width =
!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
iwl_conf->extension_chan_offset = bss_conf->ht.secondary_channel_offset;
/*
* XXX: The HT configuration needs to be moved into iwl_mac_config()
* to be done there correctly.
*/
iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
if (priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40MINUS)
iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
else if(priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40PLUS)
iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
/* If no above or below channel supplied disable FAT channel */
if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW) {
iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
iwl_conf->supported_chan_width = 0;
}
iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
iwl_conf->tx_chan_width = bss_conf->ht.width_40_ok;
iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
iwl_conf->ht_protection =
bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
iwl_conf->non_GF_STA_present =
......
......@@ -495,11 +495,9 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
}
if (changed & BSS_CHANGED_HT) {
printk(KERN_DEBUG " %s: HT: sec_ch_offs=%d width_40_ok=%d "
"op_mode=%d\n",
printk(KERN_DEBUG " %s: HT: op_mode=0x%x\n",
wiphy_name(hw->wiphy),
info->ht.secondary_channel_offset,
info->ht.width_40_ok, info->ht.operation_mode);
info->ht.operation_mode);
}
if (changed & BSS_CHANGED_BASIC_RATES) {
......
......@@ -201,13 +201,13 @@ enum nl80211_commands {
* @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
* @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
* @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
* @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ
* @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
* if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
* NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including
* NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
* this attribute)
* NL80211_SEC_CHAN_DISABLED = HT20 only
* NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel
* NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel
* NL80211_CHAN_HT20 = HT20 only
* NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
* NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
*
* @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
* @NL80211_ATTR_IFNAME: network interface name
......@@ -344,7 +344,7 @@ enum nl80211_attrs {
NL80211_ATTR_WIPHY_TXQ_PARAMS,
NL80211_ATTR_WIPHY_FREQ,
NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET,
NL80211_ATTR_WIPHY_CHANNEL_TYPE,
/* add attributes here, update the policy in nl80211.c */
......@@ -805,10 +805,10 @@ enum nl80211_txq_q {
NL80211_TXQ_Q_BK
};
enum nl80211_sec_chan_offset {
NL80211_SEC_CHAN_NO_HT /* No HT */,
NL80211_SEC_CHAN_DISABLED /* HT20 only */,
NL80211_SEC_CHAN_BELOW /* HT40- */,
NL80211_SEC_CHAN_ABOVE /* HT40+ */
enum nl80211_channel_type {
NL80211_CHAN_NO_HT,
NL80211_CHAN_HT20,
NL80211_CHAN_HT40MINUS,
NL80211_CHAN_HT40PLUS
};
#endif /* __LINUX_NL80211_H */
......@@ -563,7 +563,7 @@ struct cfg80211_ops {
int (*set_channel)(struct wiphy *wiphy,
struct ieee80211_channel *chan,
enum nl80211_sec_chan_offset);
enum nl80211_channel_type channel_type);
};
/* temporary wext handlers */
......
......@@ -165,14 +165,9 @@ enum ieee80211_bss_change {
/**
* struct ieee80211_bss_ht_conf - BSS's changing HT configuration
* @secondary_channel_offset: secondary channel offset, uses
* %IEEE80211_HT_PARAM_CHA_SEC_ values
* @width_40_ok: indicates that 40 MHz bandwidth may be used for TX
* @operation_mode: HT operation mode (like in &struct ieee80211_ht_info)
*/
struct ieee80211_bss_ht_conf {
u8 secondary_channel_offset;
bool width_40_ok;
u16 operation_mode;
};
......@@ -508,9 +503,7 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
struct ieee80211_ht_conf {
bool enabled;
int sec_chan_offset; /* 0 = HT40 disabled; -1 = HT40 enabled, secondary
* channel below primary; 1 = HT40 enabled,
* secondary channel above primary */
enum nl80211_channel_type channel_type;
};
/**
......
......@@ -1122,12 +1122,12 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
static int ieee80211_set_channel(struct wiphy *wiphy,
struct ieee80211_channel *chan,
enum nl80211_sec_chan_offset sec_chan_offset)
enum nl80211_channel_type channel_type)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
local->oper_channel = chan;
local->oper_sec_chan_offset = sec_chan_offset;
local->oper_channel_type = channel_type;
return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
}
......
......@@ -98,6 +98,7 @@ u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
struct ieee80211_bss_ht_conf ht;
u32 changed = 0;
bool enable_ht = true, ht_changed;
enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
......@@ -112,24 +113,36 @@ u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
ieee80211_channel_to_frequency(hti->control_chan))
enable_ht = false;
/*
* XXX: This is totally incorrect when there are multiple virtual
* interfaces, needs to be fixed later.
*/
ht_changed = local->hw.conf.ht.enabled != enable_ht;
if (enable_ht) {
channel_type = NL80211_CHAN_HT20;
if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
(sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
(hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
channel_type = NL80211_CHAN_HT40PLUS;
break;
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
channel_type = NL80211_CHAN_HT40MINUS;
break;
}
}
}
ht_changed = local->hw.conf.ht.enabled != enable_ht ||
channel_type != local->hw.conf.ht.channel_type;
local->oper_channel_type = channel_type;
local->hw.conf.ht.enabled = enable_ht;
if (ht_changed)
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
/* disable HT */
if (!enable_ht)
return 0;
ht.secondary_channel_offset =
hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
ht.width_40_ok =
!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
(sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
(hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY);
ht.operation_mode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
......
......@@ -625,7 +625,7 @@ struct ieee80211_local {
struct delayed_work scan_work;
struct ieee80211_sub_if_data *scan_sdata;
struct ieee80211_channel *oper_channel, *scan_channel;
enum nl80211_sec_chan_offset oper_sec_chan_offset;
enum nl80211_channel_type oper_channel_type;
u8 scan_ssid[IEEE80211_MAX_SSID_LEN];
size_t scan_ssid_len;
struct list_head bss_list;
......
......@@ -195,37 +195,30 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
struct ieee80211_channel *chan;
int ret = 0;
int power;
enum nl80211_sec_chan_offset sec_chan_offset;
enum nl80211_channel_type channel_type;
might_sleep();
if (local->sw_scanning) {
chan = local->scan_channel;
sec_chan_offset = NL80211_SEC_CHAN_NO_HT;
channel_type = NL80211_CHAN_NO_HT;
} else {
chan = local->oper_channel;
sec_chan_offset = local->oper_sec_chan_offset;
channel_type = local->oper_channel_type;
}
if (chan != local->hw.conf.channel ||
sec_chan_offset != local->hw.conf.ht.sec_chan_offset) {
channel_type != local->hw.conf.ht.channel_type) {
local->hw.conf.channel = chan;
switch (sec_chan_offset) {
case NL80211_SEC_CHAN_NO_HT:
local->hw.conf.ht.channel_type = channel_type;
switch (channel_type) {
case NL80211_CHAN_NO_HT:
local->hw.conf.ht.enabled = false;
local->hw.conf.ht.sec_chan_offset = 0;
break;
case NL80211_SEC_CHAN_DISABLED:
case NL80211_CHAN_HT20:
case NL80211_CHAN_HT40MINUS:
case NL80211_CHAN_HT40PLUS:
local->hw.conf.ht.enabled = true;
local->hw.conf.ht.sec_chan_offset = 0;
break;
case NL80211_SEC_CHAN_BELOW:
local->hw.conf.ht.enabled = true;
local->hw.conf.ht.sec_chan_offset = -1;
break;
case NL80211_SEC_CHAN_ABOVE:
local->hw.conf.ht.enabled = true;
local->hw.conf.ht.sec_chan_offset = 1;
break;
}
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
......
......@@ -858,6 +858,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
rcu_read_unlock();
local->hw.conf.ht.enabled = false;
local->oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
ieee80211_bss_info_change_notify(sdata, changed);
......
......@@ -641,7 +641,7 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
chan->flags & IEEE80211_CHAN_NO_IBSS)
return ret;
local->oper_channel = chan;
local->oper_sec_chan_offset = NL80211_SEC_CHAN_NO_HT;
local->oper_channel_type = NL80211_CHAN_NO_HT;
if (local->sw_scanning || local->hw_scanning)
ret = 0;
......
......@@ -60,7 +60,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
.len = BUS_ID_SIZE-1 },
[NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },
[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 },
[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
......@@ -362,8 +362,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
}
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
enum nl80211_sec_chan_offset sec_chan_offset =
NL80211_SEC_CHAN_NO_HT;
enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
struct ieee80211_channel *chan;
struct ieee80211_sta_ht_cap *ht_cap;
u32 freq, sec_freq;
......@@ -375,13 +374,13 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
result = -EINVAL;
if (info->attrs[NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET]) {
sec_chan_offset = nla_get_u32(info->attrs[
NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET]);
if (sec_chan_offset != NL80211_SEC_CHAN_NO_HT &&
sec_chan_offset != NL80211_SEC_CHAN_DISABLED &&
sec_chan_offset != NL80211_SEC_CHAN_BELOW &&
sec_chan_offset != NL80211_SEC_CHAN_ABOVE)
if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
channel_type = nla_get_u32(info->attrs[
NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
if (channel_type != NL80211_CHAN_NO_HT &&
channel_type != NL80211_CHAN_HT20 &&
channel_type != NL80211_CHAN_HT40PLUS &&
channel_type != NL80211_CHAN_HT40MINUS)
goto bad_res;
}
......@@ -392,9 +391,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
goto bad_res;
if (sec_chan_offset == NL80211_SEC_CHAN_BELOW)
if (channel_type == NL80211_CHAN_HT40MINUS)
sec_freq = freq - 20;
else if (sec_chan_offset == NL80211_SEC_CHAN_ABOVE)
else if (channel_type == NL80211_CHAN_HT40PLUS)
sec_freq = freq + 20;
else
sec_freq = 0;
......@@ -402,7 +401,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
/* no HT capabilities */
if (sec_chan_offset != NL80211_SEC_CHAN_NO_HT &&
if (channel_type != NL80211_CHAN_NO_HT &&
!ht_cap->ht_supported)
goto bad_res;
......@@ -422,7 +421,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
}
result = rdev->ops->set_channel(&rdev->wiphy, chan,
sec_chan_offset);
channel_type);
if (result)
goto bad_res;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment