Commit 09ebdedf authored by Mike Frysinger's avatar Mike Frysinger

Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECK

This code was useful during early port development when our icache code
wasn't solid, but that ship has sailed long ago, and no code calls this
function anymore (irq_panic).  So punt it.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent ff7cbc4b
......@@ -102,17 +102,6 @@ config DEBUG_DOUBLEFAULT_RESET
endchoice
config DEBUG_ICACHE_CHECK
bool "Check Instruction cache coherency"
depends on DEBUG_KERNEL
depends on DEBUG_HWERR
help
Say Y here if you are getting weird unexplained errors. This will
ensure that icache is what SDRAM says it should be by doing a
byte wise comparison between SDRAM and instruction cache. This
also relocates the irq_panic() function to L1 memory, (which is
un-cached).
config DEBUG_HUNT_FOR_ZERO
bool "Catch NULL pointer reads/writes"
default y
......
......@@ -11,4 +11,3 @@ obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
obj-$(CONFIG_DEBUG_ICACHE_CHECK) += irqpanic.o
/*
* panic kernel with dump information
*
* Copyright 2005-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <asm/blackfin.h>
#define L1_ICACHE_START 0xffa10000
#define L1_ICACHE_END 0xffa13fff
/*
* irq_panic - calls panic with string setup
*/
__attribute__ ((l1_text))
asmlinkage void irq_panic(int reason, struct pt_regs *regs)
{
unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa;
unsigned short i, j, die;
unsigned int bad[10][6];
/* check entire cache for coherency
* Since printk is in cacheable memory,
* don't call it until you have checked everything
*/
die = 0;
i = 0;
/* check icache */
for (ca = L1_ICACHE_START; ca <= L1_ICACHE_END && i < 10; ca += 32) {
/* Grab various address bits for the itest_cmd fields */
cmd = (((ca & 0x3000) << 4) | /* ca[13:12] for SBNK[1:0] */
((ca & 0x0c00) << 16) | /* ca[11:10] for WAYSEL[1:0] */
((ca & 0x3f8)) | /* ca[09:03] for SET[4:0] and DW[1:0] */
0); /* Access Tag, Read access */
SSYNC();
bfin_write_ITEST_COMMAND(cmd);
SSYNC();
tag = bfin_read_ITEST_DATA0();
SSYNC();
/* if tag is marked as valid, check it */
if (tag & 1) {
/* The icache is arranged in 4 groups of 64-bits */
for (j = 0; j < 32; j += 8) {
cmd = ((((ca + j) & 0x3000) << 4) | /* ca[13:12] for SBNK[1:0] */
(((ca + j) & 0x0c00) << 16) | /* ca[11:10] for WAYSEL[1:0] */
(((ca + j) & 0x3f8)) | /* ca[09:03] for SET[4:0] and DW[1:0] */
4); /* Access Data, Read access */
SSYNC();
bfin_write_ITEST_COMMAND(cmd);
SSYNC();
cache_hi = bfin_read_ITEST_DATA1();
cache_lo = bfin_read_ITEST_DATA0();
pa = ((unsigned int *)((tag & 0xffffcc00) |
((ca + j) & ~(0xffffcc00))));
/*
* Debugging this, enable
*
* printk("addr: %08x %08x%08x | %08x%08x\n",
* ((unsigned int *)((tag & 0xffffcc00) | ((ca+j) & ~(0xffffcc00)))),
* cache_hi, cache_lo, *(pa+1), *pa);
*/
if (cache_hi != *(pa + 1) || cache_lo != *pa) {
/* Since icache is not working, stay out of it, by not printing */
die = 1;
bad[i][0] = (ca + j);
bad[i][1] = cache_hi;
bad[i][2] = cache_lo;
bad[i][3] = ((tag & 0xffffcc00) |
((ca + j) & ~(0xffffcc00)));
bad[i][4] = *(pa + 1);
bad[i][5] = *(pa);
i++;
}
}
}
}
if (die) {
printk(KERN_EMERG "icache coherency error\n");
for (j = 0; j <= i; j++) {
printk(KERN_EMERG
"cache address : %08x cache value : %08x%08x\n",
bad[j][0], bad[j][1], bad[j][2]);
printk(KERN_EMERG
"physical address: %08x SDRAM value : %08x%08x\n",
bad[j][3], bad[j][4], bad[j][5]);
}
panic("icache coherency error");
} else
printk(KERN_EMERG "icache checked, and OK\n");
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment