mpt2sas: Remove .c and .h files from mpt2sas driver

Remove .c and .h files which are no longer needed from mpt2sas
driver. We are reusing this code from mpt3sas.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/mpt2sas/mpt2sas_debug.h

-/*
- * Logging Support for MPT (Message Passing Technology) based controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_DEBUG_H_INCLUDED
-#define MPT2SAS_DEBUG_H_INCLUDED
-
-#define MPT_DEBUG			0x00000001
-#define MPT_DEBUG_MSG_FRAME		0x00000002
-#define MPT_DEBUG_SG			0x00000004
-#define MPT_DEBUG_EVENTS		0x00000008
-#define MPT_DEBUG_EVENT_WORK_TASK	0x00000010
-#define MPT_DEBUG_INIT			0x00000020
-#define MPT_DEBUG_EXIT			0x00000040
-#define MPT_DEBUG_FAIL			0x00000080
-#define MPT_DEBUG_TM			0x00000100
-#define MPT_DEBUG_REPLY			0x00000200
-#define MPT_DEBUG_HANDSHAKE		0x00000400
-#define MPT_DEBUG_CONFIG		0x00000800
-#define MPT_DEBUG_DL			0x00001000
-#define MPT_DEBUG_RESET			0x00002000
-#define MPT_DEBUG_SCSI			0x00004000
-#define MPT_DEBUG_IOCTL			0x00008000
-#define MPT_DEBUG_CSMISAS		0x00010000
-#define MPT_DEBUG_SAS			0x00020000
-#define MPT_DEBUG_TRANSPORT		0x00040000
-#define MPT_DEBUG_TASK_SET_FULL		0x00080000
-
-#define MPT_DEBUG_TARGET_MODE		0x00100000
-
-
-/*
- * CONFIG_SCSI_MPT2SAS_LOGGING - enabled in Kconfig
- */
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)			\
-{								\
-	if (IOC->logging_level & BITS)				\
-		CMD;						\
-}
-#else
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)
-#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */
-
-
-/*
- * debug macros
- */
-
-#define dprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG)
-
-#define dsgprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG)
-
-#define devtprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS)
-
-#define dewtprintk(IOC, CMD)		\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENT_WORK_TASK)
-
-#define dinitprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT)
-
-#define dexitprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT)
-
-#define dfailprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL)
-
-#define dtmprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM)
-
-#define dreplyprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY)
-
-#define dhsprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE)
-
-#define dcprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG)
-
-#define ddlprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL)
-
-#define drsprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET)
-
-#define dsprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI)
-
-#define dctlprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL)
-
-#define dcsmisasprintk(IOC, CMD)		\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CSMISAS)
-
-#define dsasprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS)
-
-#define dsastransport(IOC, CMD)		\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
-
-#define dmfprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME)
-
-#define dtsfprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TASK_SET_FULL)
-
-#define dtransportprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRANSPORT)
-
-#define dTMprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TARGET_MODE)
-
-/* inline functions for dumping debug data*/
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _debug_dump_mf - print message frame contents
- * @mpi_request: pointer to message frame
- * @sz: number of dwords
- */
-static inline void
-_debug_dump_mf(void *mpi_request, int sz)
-{
-	int i;
-	__le32 *mfp = (__le32 *)mpi_request;
-
-	printk(KERN_INFO "mf:\n\t");
-	for (i = 0; i < sz; i++) {
-		if (i && ((i % 8) == 0))
-			printk("\n\t");
-		printk("%08x ", le32_to_cpu(mfp[i]));
-	}
-	printk("\n");
-}
-#else
-#define _debug_dump_mf(mpi_request, sz)
-#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */
-
-#endif /* MPT2SAS_DEBUG_H_INCLUDED */