Merge tag 'actions-arm64-dt-for-4.16' of...

Merge tag 'actions-arm64-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt

Actions Semi arm64 based SoC DT for v4.16

This adds S700 SoC and CubieBoard7.

* tag 'actions-arm64-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  arm64: dts: actions: Add S700 and CubieBoard7
  dt-bindings: power: Add Actions Semi S700 SPS
  dt-bindings: arm: actions: Add S700 and CubieBoard7
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/actions.txt

@@ -26,6 +26,21 @@ Root node property compatible must contain, depending on board:
  - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar"
 
 
+S700 SoC
+========
+
+Required root node properties:
+
+- compatible :  must contain "actions,s700"
+
+
+Boards:
+
+Root node property compatible must contain, depending on board:
+
+ - Cubietech CubieBoard7: "cubietech,cubieboard7"
+
+
 S900 SoC
 ========
 

Documentation/devicetree/bindings/power/actions,owl-sps.txt

@@ -2,10 +2,12 @@ Actions Semi Owl Smart Power System (SPS)
 
 Required properties:
 - compatible          :  "actions,s500-sps" for S500
+                         "actions,s700-sps" for S700
 - reg                 :  Offset and length of the register set for the device.
 - #power-domain-cells :  Must be 1.
                          See macros in:
                           include/dt-bindings/power/owl-s500-powergate.h for S500
+                          include/dt-bindings/power/owl-s700-powergate.h for S700
 
 
 Example:

arch/arm64/boot/dts/actions/Makefile

+dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb
+
 dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb

arch/arm64/boot/dts/actions/s700-cubieboard7.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "s700.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard7", "actions,s700";
+	model = "CubieBoard7";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	memory@1,e0000000 {
+		device_type = "memory";
+		reg = <0x1 0xe0000000 0x0 0x0>;
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};

arch/arm64/boot/dts/actions/s700.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "actions,s700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e01b0100 {
+			compatible = "actions,s700-sps";
+			reg = <0x0 0xe01b0100 0x0 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		timer: timer@e024c000 {
+			compatible = "actions,s700-timer";
+			reg = <0x0 0xe024c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+	};
+};

include/dt-bindings/power/owl-s700-powergate.h

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Actions Semi S700 SPS
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+#ifndef DT_BINDINGS_POWER_OWL_S700_POWERGATE_H
+#define DT_BINDINGS_POWER_OWL_S700_POWERGATE_H
+
+#define S700_PD_VDE	0
+#define S700_PD_VCE_SI	1
+#define S700_PD_USB2_1	2
+#define S700_PD_HDE	3
+#define S700_PD_DMA	4
+#define S700_PD_DS	5
+#define S700_PD_USB3	6
+#define S700_PD_USB2_0	7
+
+#endif