Commit 0b390e21 authored by Will Deacon's avatar Will Deacon

ARM: perf: use cpumask_t to record active IRQs

Commit 5dfc54e0 ("ARM: GIC: avoid routing interrupts to offline CPUs")
prevents the GIC from setting the affinity of an IRQ to a CPU with
id >= nr_cpu_ids. This was previously abused by perf on some platforms
where more IRQs were registered than possible CPUs.

This patch fixes the problem by using a cpumask_t to keep track of the
active (requested) interrupts in perf. The same effect could be achieved
by limiting the number of IRQs to the number of CPUs, but using a mask
instead will be useful for adding extended CPU hotplug support in the
future.
Acked-by: default avatarJamie Iles <jamie@jamieiles.com>
Reviewed-by: default avatarJean Pihet <j-pihet@ti.com>
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
parent b0e89590
......@@ -69,6 +69,7 @@ static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
struct arm_pmu {
enum arm_perf_pmu_ids id;
cpumask_t active_irqs;
const char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
void (*enable)(struct hw_perf_event *evt, int idx);
......@@ -388,6 +389,25 @@ static irqreturn_t armpmu_platform_irq(int irq, void *dev)
return plat->handle_irq(irq, dev, armpmu->handle_irq);
}
static void
armpmu_release_hardware(void)
{
int i, irq, irqs;
irqs = min(pmu_device->num_resources, num_possible_cpus());
for (i = 0; i < irqs; ++i) {
if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
continue;
irq = platform_get_irq(pmu_device, i);
if (irq >= 0)
free_irq(irq, NULL);
}
armpmu->stop();
release_pmu(ARM_PMU_DEVICE_CPU);
}
static int
armpmu_reserve_hardware(void)
{
......@@ -401,20 +421,20 @@ armpmu_reserve_hardware(void)
return err;
}
irqs = pmu_device->num_resources;
plat = dev_get_platdata(&pmu_device->dev);
if (plat && plat->handle_irq)
handle_irq = armpmu_platform_irq;
else
handle_irq = armpmu->handle_irq;
irqs = min(pmu_device->num_resources, num_possible_cpus());
if (irqs < 1) {
pr_err("no irqs for PMUs defined\n");
return -ENODEV;
}
for (i = 0; i < irqs; ++i) {
err = 0;
irq = platform_get_irq(pmu_device, i);
if (irq < 0)
continue;
......@@ -422,13 +442,12 @@ armpmu_reserve_hardware(void)
/*
* If we have a single PMU interrupt that we can't shift,
* assume that we're running on a uniprocessor machine and
* continue.
* continue. Otherwise, continue without this interrupt.
*/
err = irq_set_affinity(irq, cpumask_of(i));
if (err && irqs > 1) {
pr_err("unable to set irq affinity (irq=%d, cpu=%u)\n",
irq, i);
break;
if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
irq, i);
continue;
}
err = request_irq(irq, handle_irq,
......@@ -437,35 +456,14 @@ armpmu_reserve_hardware(void)
if (err) {
pr_err("unable to request IRQ%d for ARM PMU counters\n",
irq);
break;
armpmu_release_hardware();
return err;
}
}
if (err) {
for (i = i - 1; i >= 0; --i) {
irq = platform_get_irq(pmu_device, i);
if (irq >= 0)
free_irq(irq, NULL);
}
release_pmu(ARM_PMU_DEVICE_CPU);
cpumask_set_cpu(i, &armpmu->active_irqs);
}
return err;
}
static void
armpmu_release_hardware(void)
{
int i, irq;
for (i = pmu_device->num_resources - 1; i >= 0; --i) {
irq = platform_get_irq(pmu_device, i);
if (irq >= 0)
free_irq(irq, NULL);
}
armpmu->stop();
release_pmu(ARM_PMU_DEVICE_CPU);
return 0;
}
static atomic_t active_events = ATOMIC_INIT(0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment