[SPARC]: introduce a SPARC Kconfig symbol

Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/sparc/Kconfig

@@ -55,6 +55,10 @@ config NR_CPUS
 	depends on SMP
 	default "32"
 
+config SPARC
+	bool
+	default y
+
 # Identify this as a Sparc32 build
 config SPARC32
 	bool

arch/sparc64/Kconfig

@@ -5,6 +5,10 @@
 
 mainmenu "Linux/UltraSPARC Kernel Configuration"
 
+config SPARC
+	bool
+	default y
+
 config SPARC64
 	bool
 	default y

drivers/char/Kconfig

@@ -687,7 +687,7 @@ config NVRAM
 
 config RTC
 	tristate "Enhanced Real Time Clock Support"
-	depends on !PPC32 && !PARISC && !IA64 && !M68K && (!(SPARC32 || SPARC64) || PCI)
+	depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI)
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -735,7 +735,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC32 && !SPARC64
+	depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you

drivers/char/keyboard.c

@@ -930,8 +930,8 @@ static void kbd_refresh_leds(struct input_handle *handle)
 }
 
 #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
-    defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC32) ||\
-    defined(CONFIG_SPARC64) || defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
+    defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
+    defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
     (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
 
 #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
@@ -958,7 +958,7 @@ static unsigned short x86_keycodes[256] =
 extern int mac_hid_mouse_emulate_buttons(int, int, int);
 #endif /* CONFIG_MAC_EMUMOUSEBTN */
 
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
 static int sparc_l1_a_state = 0;
 extern void sun_do_break(void);
 #endif
@@ -1045,7 +1045,7 @@ static void kbd_keycode(unsigned int keycode, int down,
 
 	if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT)
 		sysrq_alt = down;
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
 	if (keycode == KEY_STOP)
 		sparc_l1_a_state = down;
 #endif
@@ -1072,7 +1072,7 @@ static void kbd_keycode(unsigned int keycode, int down,
 		return;
 	}
 #endif
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
 	if (keycode == KEY_A && sparc_l1_a_state) {
 		sparc_l1_a_state = 0;
 		sun_do_break();

drivers/fc4/Kconfig

@@ -26,7 +26,7 @@ comment "FC4 drivers"
 
 config FC4_SOC
 	tristate "Sun SOC/Sbus"
-	depends on FC4!=n && (SPARC32 || SPARC64)
+	depends on FC4!=n && SPARC
 	help
 	  Serial Optical Channel is an interface card with one or two Fibre
 	  Optic ports, each of which can be connected to a disk array. Note
@@ -38,7 +38,7 @@ config FC4_SOC
 
 config FC4_SOCAL
 	tristate "Sun SOC+ (aka SOCAL)"
-	depends on FC4!=n && (SPARC32 || SPARC64)
+	depends on FC4!=n && SPARC
 	---help---
 	  Serial Optical Channel Plus is an interface card with up to two
 	  Fibre Optic ports. This card supports FC Arbitrated Loop (usually
@@ -62,7 +62,7 @@ config SCSI_PLUTO
 	  be called pluto.
 
 config SCSI_FCAL
-	tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC32 || SPARC64
+	tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC
 	depends on FC4!=n && SCSI
 	help
 	  This driver drives FC-AL disks connected through a Fibre Channel
@@ -75,7 +75,7 @@ config SCSI_FCAL
 
 config SCSI_FCAL
 	prompt "Generic FC-AL disk driver"
-	depends on FC4!=n && SCSI && !SPARC32 && !SPARC64
+	depends on FC4!=n && SCSI && !SPARC
 
 endmenu
 

drivers/input/misc/Kconfig

@@ -26,7 +26,7 @@ config INPUT_PCSPKR
 
 config INPUT_SPARCSPKR
 	tristate "SPARC Speaker support"
-	depends on PCI && (SPARC32 || SPARC64)
+	depends on PCI && SPARC
 	help
 	  Say Y here if you want the standard Speaker on Sparc PCI systems
 	  to be used for bells and whistles.

drivers/input/serio/i8042.h

@@ -21,7 +21,7 @@
 #include "i8042-ip22io.h"
 #elif defined(CONFIG_PPC)
 #include "i8042-ppcio.h"
-#elif defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#elif defined(CONFIG_SPARC)
 #include "i8042-sparcio.h"
 #elif defined(CONFIG_X86) || defined(CONFIG_IA64)
 #include "i8042-x86ia64io.h"

drivers/mtd/maps/Kconfig

@@ -62,7 +62,7 @@ config MTD_PHYSMAP_BANKWIDTH
 
 config MTD_SUN_UFLASH
 	tristate "Sun Microsystems userflash support"
-	depends on (SPARC32 || SPARC64) && MTD_CFI
+	depends on SPARC && MTD_CFI
 	help
 	  This provides a 'mapping' driver which supports the way in
 	  which user-programmable flash chips are connected on various

drivers/serial/Kconfig

@@ -10,7 +10,7 @@ menu "Serial drivers"
 # The new 8250/16550 serial drivers
 config SERIAL_8250
 	tristate "8250/16550 and compatible serial support"
-	depends on (BROKEN || !(SPARC64 || SPARC32))
+	depends on (BROKEN || !SPARC)
 	select SERIAL_CORE
 	---help---
 	  This selects whether you want to include the driver for the standard
@@ -469,14 +469,14 @@ config SERIAL_IMX_CONSOLE
 
 config SERIAL_SUNCORE
 	bool
-	depends on SPARC32 || SPARC64
+	depends on SPARC
 	select SERIAL_CORE
 	select SERIAL_CORE_CONSOLE
 	default y
 
 config SERIAL_SUNZILOG
 	tristate "Sun Zilog8530 serial support"
-	depends on SPARC32 || SPARC64
+	depends on SPARC
 	help
 	  This driver supports the Zilog8530 serial ports found on many Sparc
 	  systems.  Say Y or M if you want to be able to these serial ports.
@@ -491,7 +491,7 @@ config SERIAL_SUNZILOG_CONSOLE
 
 config SERIAL_SUNSU
 	tristate "Sun SU serial support"
-	depends on (SPARC32 || SPARC64) && PCI
+	depends on SPARC && PCI
 	help
 	  This driver supports the 8250 serial ports that run the keyboard and
 	  mouse on (PCI) UltraSPARC systems.  Say Y or M if you want to be able
@@ -547,7 +547,7 @@ config PDC_CONSOLE
 
 config SERIAL_SUNSAB
 	tristate "Sun Siemens SAB82532 serial support"
-	depends on (SPARC32 || SPARC64) && PCI
+	depends on SPARC && PCI
 	help
 	  This driver supports the Siemens SAB82532 DUSCC serial ports on newer
 	  (PCI) UltraSPARC systems.  Say Y or M if you want to be able to these

drivers/video/Kconfig

@@ -536,13 +536,13 @@ config FB_SUN3
 
 config FB_SBUS
 	bool "SBUS and UPA framebuffers"
-	depends on (FB = y) && (SPARC32 || SPARC64)
+	depends on (FB = y) && SPARC
 	help
 	  Say Y if you want support for SBUS or UPA based frame buffer device.
 
 config FB_BW2
 	bool "BWtwo support"
-	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -551,7 +551,7 @@ config FB_BW2
 
 config FB_CG3
 	bool "CGthree support"
-	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -560,7 +560,7 @@ config FB_CG3
 
 config FB_CG6
 	bool "CGsix (GX,TurboGX) support"
-	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	help
@@ -1268,7 +1268,7 @@ config FB_LEO
 
 config FB_PCI
 	bool "PCI framebuffers"
-	depends on (FB = y) && PCI && (SPARC64 || SPARC32)
+	depends on (FB = y) && PCI && SPARC
 
 config FB_IGA
 	bool "IGA 168x display support"

drivers/video/console/Kconfig

@@ -6,7 +6,7 @@ menu "Console display driver support"
 
 config VGA_CONSOLE
 	bool "VGA text console" if EMBEDDED || !X86
-	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE
+	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !ARCH_VERSATILE
 	default y
 	help
 	  Saying Y here will allow you to use Linux in text mode through a
@@ -68,7 +68,7 @@ config SGI_NEWPORT_CONSOLE
 
 config PROM_CONSOLE
 	bool "PROM console"
-	depends on SPARC32 || SPARC64
+	depends on SPARC
 	help
 	  Say Y to build a console driver for Sun machines that uses the
 	  terminal emulation built into their console PROMS.
@@ -136,7 +136,7 @@ config FONTS
 config FONT_8x8
 	bool "VGA 8x8 font" if FONTS
 	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-	default y if !SPARC32 && !SPARC64 && !FONTS
+	default y if !SPARC && !FONTS
 	help
 	  This is the "high resolution" font for the VGA frame buffer (the one
 	  provided by the text console 80x50 (and higher) modes).
@@ -150,7 +150,7 @@ config FONT_8x8
 config FONT_8x16
 	bool "VGA 8x16 font" if FONTS
 	depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON 
-	default y if !SPARC32 && !SPARC64 && !FONTS
+	default y if !SPARC && !FONTS
 	help
 	  This is the "high resolution" font for the VGA frame buffer (the one
 	  provided by the VGA text console 80x25 mode.
@@ -160,7 +160,7 @@ config FONT_8x16
 config FONT_6x11
 	bool "Mac console 6x11 font (not supported by all drivers)" if FONTS
 	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-	default y if !SPARC32 && !SPARC64 && !FONTS && MAC
+	default y if !SPARC && !FONTS && MAC
 	help
 	  Small console font with Macintosh-style high-half glyphs.  Some Mac
 	  framebuffer drivers don't support this one at all.
@@ -176,7 +176,7 @@ config FONT_7x14
 config FONT_PEARL_8x8
 	bool "Pearl (old m68k) console 8x8 font" if FONTS
 	depends on FRAMEBUFFER_CONSOLE
-	default y if !SPARC32 && !SPARC64 && !FONTS && AMIGA
+	default y if !SPARC && !FONTS && AMIGA
 	help
 	  Small console font with PC-style control-character and high-half
 	  glyphs.
@@ -184,24 +184,24 @@ config FONT_PEARL_8x8
 config FONT_ACORN_8x8
 	bool "Acorn console 8x8 font" if FONTS
 	depends on FRAMEBUFFER_CONSOLE
-	default y if !SPARC32 && !SPARC64 && !FONTS && ARM && ARCH_ACORN
+	default y if !SPARC && !FONTS && ARM && ARCH_ACORN
 	help
 	  Small console font with PC-style control characters and high-half
 	  glyphs.
 
 config FONT_MINI_4x6
 	bool "Mini 4x6 font"
-	depends on !SPARC32 && !SPARC64 && FONTS
+	depends on !SPARC && FONTS
 
 config FONT_SUN8x16
 	bool "Sparc console 8x16 font"
-	depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64)
+	depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC)
 	help
 	  This is the high resolution console font for Sun machines. Say Y.
 
 config FONT_SUN12x22
 	bool "Sparc console 12x22 font (not supported by all drivers)"
-	depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64)
+	depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC)
 	help
 	  This is the high resolution console font for Sun machines with very
 	  big letters (like the letters used in the SPARC PROM). If the

drivers/video/logo/Kconfig

@@ -47,7 +47,7 @@ config LOGO_SGI_CLUT224
 
 config LOGO_SUN_CLUT224
 	bool "224-color Sun Linux logo"
-	depends on LOGO && (SPARC32 || SPARC64)
+	depends on LOGO && SPARC
 	default y
 
 config LOGO_SUPERH_MONO

fs/partitions/Kconfig

@@ -203,7 +203,7 @@ config ULTRIX_PARTITION
 
 config SUN_PARTITION
 	bool "Sun partition tables support" if PARTITION_ADVANCED
-	default y if (SPARC32 || SPARC64 || SUN3 || SUN3X)
+	default y if (SPARC || SUN3 || SUN3X)
 	---help---
 	  Like most systems, SunOS uses its own hard disk partition table
 	  format, incompatible with all others. Saying Y here allows you to

sound/sparc/Kconfig

 # ALSA Sparc drivers
 
 menu "ALSA Sparc devices"
-	depends on SND!=n && (SPARC32 || SPARC64)
+	depends on SND!=n && SPARC
 
 config SND_SUN_AMD7930
 	tristate "Sun AMD7930"