Commit 0b7c446f authored by Benjamin Gaignard's avatar Benjamin Gaignard Committed by Rob Herring

dt-bindings: dma: Convert stm32 DMAMUX bindings to json-schema

Convert the STM32 DMAMUX binding to DT schema format using json-schema
Signed-off-by: default avatarBenjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 71021f3f
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings
maintainers:
- Amelie Delaunay <amelie.delaunay@st.com>
allOf:
- $ref: "dma-router.yaml#"
properties:
"#dma-cells":
const: 3
compatible:
const: st,stm32h7-dmamux
reg:
maxItems: 1
clocks:
maxItems: 1
resets:
maxItems: 1
required:
- compatible
- reg
- dma-masters
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
dma-router@40020800 {
compatible = "st,stm32h7-dmamux";
reg = <0x40020800 0x3c>;
#dma-cells = <3>;
dma-requests = <128>;
dma-channels = <16>;
dma-masters = <&dma1 &dma2>;
clocks = <&timer_clk>;
};
...
STM32 DMA MUX (DMA request router)
Required properties:
- compatible: "st,stm32h7-dmamux"
- reg: Memory map for accessing module
- #dma-cells: Should be set to <3>.
First parameter is request line number.
Second is DMA channel configuration
Third is Fifo threshold
For more details about the three cells, please see
stm32-dma.txt documentation binding file
- dma-masters: Phandle pointing to the DMA controllers.
Several controllers are allowed. Only "st,stm32-dma" DMA
compatible are supported.
Optional properties:
- dma-channels : Number of DMA requests supported.
- dma-requests : Number of DMAMUX requests supported.
- resets: Reference to a reset controller asserting the DMA controller
- clocks: Input clock of the DMAMUX instance.
Example:
/* DMA controller 1 */
dma1: dma-controller@40020000 {
compatible = "st,stm32-dma";
reg = <0x40020000 0x400>;
interrupts = <11>,
<12>,
<13>,
<14>,
<15>,
<16>,
<17>,
<47>;
clocks = <&timer_clk>;
#dma-cells = <4>;
st,mem2mem;
resets = <&rcc 150>;
dma-channels = <8>;
dma-requests = <8>;
};
/* DMA controller 1 */
dma2: dma@40020400 {
compatible = "st,stm32-dma";
reg = <0x40020400 0x400>;
interrupts = <56>,
<57>,
<58>,
<59>,
<60>,
<68>,
<69>,
<70>;
clocks = <&timer_clk>;
#dma-cells = <4>;
st,mem2mem;
resets = <&rcc 150>;
dma-channels = <8>;
dma-requests = <8>;
};
/* DMA mux */
dmamux1: dma-router@40020800 {
compatible = "st,stm32h7-dmamux";
reg = <0x40020800 0x3c>;
#dma-cells = <3>;
dma-requests = <128>;
dma-channels = <16>;
dma-masters = <&dma1 &dma2>;
clocks = <&timer_clk>;
};
/* DMA client */
usart1: serial@40011000 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&timer_clk>;
dmas = <&dmamux1 41 0x414 0>,
<&dmamux1 42 0x414 0>;
dma-names = "rx", "tx";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment