Commit 0bf3a9d8 authored by Ralf Baechle's avatar Ralf Baechle Committed by David Woodhouse

[MTD] Nuke IVR leftovers

Support for the ITE8172 based boards was deleted a while ago so this is
dead code.

The Kconfig dependency on MIPS was wrong anyway, MIPS is a processor
architecture and nothing else; guesses on systems architecture are likely
to be wrong ...
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
Signed-off-by: default avatarDavid Woodhouse <dwmw2@infradead.org>
parent 66a1e421
...@@ -382,50 +382,6 @@ config MTD_TQM834x ...@@ -382,50 +382,6 @@ config MTD_TQM834x
TQ Components TQM834x boards. If you have one of these boards TQ Components TQM834x boards. If you have one of these boards
and would like to use the flash chips on it, say 'Y'. and would like to use the flash chips on it, say 'Y'.
config MTD_CSTM_MIPS_IXX
tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
help
This provides a mapping driver for the Integrated Technology
Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
Reference Board. It provides the necessary addressing, length,
buswidth, vpp code and addition setup of the flash device for
these boards. In addition, this mapping driver can be used for
other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
LEN/BUSWIDTH parameters. This mapping will provide one mtd device
using one partition. The start address can be offset from the
beginning of flash and the len can be less than the total flash
device size to allow a window into the flash. Both CFI and JEDEC
probes are called.
config MTD_CSTM_MIPS_IXX_START
hex "Physical start address of flash mapping"
depends on MTD_CSTM_MIPS_IXX
default "0x8000000"
help
This is the physical memory location that the MTD driver will
use for the flash chips on your particular target board.
Refer to the memory map which should hopefully be in the
documentation for your board.
config MTD_CSTM_MIPS_IXX_LEN
hex "Physical length of flash mapping"
depends on MTD_CSTM_MIPS_IXX
default "0x4000000"
help
This is the total length that the MTD driver will use for the
flash chips on your particular board. Refer to the memory
map which should hopefully be in the documentation for your
board.
config MTD_CSTM_MIPS_IXX_BUSWIDTH
int "Bus width in octets"
depends on MTD_CSTM_MIPS_IXX
default "2"
help
This is the total bus width of the mapping of the flash chips
on your particular board.
config MTD_OCELOT config MTD_OCELOT
tristate "Momenco Ocelot boot flash device" tristate "Momenco Ocelot boot flash device"
depends on MIPS && MOMENCO_OCELOT depends on MIPS && MOMENCO_OCELOT
......
...@@ -12,7 +12,6 @@ obj-$(CONFIG_MTD_CDB89712) += cdb89712.o ...@@ -12,7 +12,6 @@ obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
obj-$(CONFIG_MTD_BAST) += bast-flash.o obj-$(CONFIG_MTD_BAST) += bast-flash.o
obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
obj-$(CONFIG_MTD_L440GX) += l440gx.o obj-$(CONFIG_MTD_L440GX) += l440gx.o
......
/*
* $Id: cstm_mips_ixx.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
*
* Mapping of a custom board with both AMD CFI and JEDEC flash in partitions.
* Config with both CFI and JEDEC device support.
*
* Basically physmap.c with the addition of partitions and
* an array of mapping info to accomodate more than one flash type per board.
*
* Copyright 2000 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
/* board and partition description */
#define MAX_PHYSMAP_PARTITIONS 8
struct cstm_mips_ixx_info {
char *name;
unsigned long window_addr;
unsigned long window_size;
int bankwidth;
int num_partitions;
};
#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
{
{
"MTD flash", // name
CONFIG_MTD_CSTM_MIPS_IXX_START, // window_addr
CONFIG_MTD_CSTM_MIPS_IXX_LEN, // window_size
CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH, // bankwidth
1, // num_partitions
},
};
static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
{
{
.name = "main partition",
.size = CONFIG_MTD_CSTM_MIPS_IXX_LEN,
.offset = 0,
},
},
};
struct map_info cstm_mips_ixx_map[PHYSMAP_NUMBER];
int __init init_cstm_mips_ixx(void)
{
int i;
int jedec;
struct mtd_info *mymtd;
struct mtd_partition *parts;
/* Initialize mapping */
for (i=0;i<PHYSMAP_NUMBER;i++) {
printk(KERN_NOTICE "cstm_mips_ixx flash device: 0x%lx at 0x%lx\n",
cstm_mips_ixx_board_desc[i].window_size, cstm_mips_ixx_board_desc[i].window_addr);
cstm_mips_ixx_map[i].phys = cstm_mips_ixx_board_desc[i].window_addr;
cstm_mips_ixx_map[i].virt = ioremap(cstm_mips_ixx_board_desc[i].window_addr, cstm_mips_ixx_board_desc[i].window_size);
if (!cstm_mips_ixx_map[i].virt) {
int j = 0;
printk(KERN_WARNING "Failed to ioremap\n");
for (j = 0; j < i; j++) {
if (cstm_mips_ixx_map[j].virt) {
iounmap(cstm_mips_ixx_map[j].virt);
cstm_mips_ixx_map[j].virt = NULL;
}
}
return -EIO;
}
cstm_mips_ixx_map[i].name = cstm_mips_ixx_board_desc[i].name;
cstm_mips_ixx_map[i].size = cstm_mips_ixx_board_desc[i].window_size;
cstm_mips_ixx_map[i].bankwidth = cstm_mips_ixx_board_desc[i].bankwidth;
simple_map_init(&cstm_mips_ixx_map[i]);
//printk(KERN_NOTICE "cstm_mips_ixx: ioremap is %x\n",(unsigned int)(cstm_mips_ixx_map[i].virt));
}
for (i=0;i<PHYSMAP_NUMBER;i++) {
parts = &cstm_mips_ixx_partitions[i][0];
jedec = 0;
mymtd = (struct mtd_info *)do_map_probe("cfi_probe", &cstm_mips_ixx_map[i]);
//printk(KERN_NOTICE "phymap %d cfi_probe: mymtd is %x\n",i,(unsigned int)mymtd);
if (!mymtd) {
jedec = 1;
mymtd = (struct mtd_info *)do_map_probe("jedec_probe", &cstm_mips_ixx_map[i]);
printk(KERN_NOTICE "cstm_mips_ixx %d jedec: mymtd is %x\n",i,(unsigned int)mymtd);
}
if (mymtd) {
mymtd->owner = THIS_MODULE;
cstm_mips_ixx_map[i].map_priv_2 = (unsigned long)mymtd;
add_mtd_partitions(mymtd, parts, cstm_mips_ixx_board_desc[i].num_partitions);
}
else {
for (i = 0; i < PHYSMAP_NUMBER; i++) {
if (cstm_mips_ixx_map[i].virt) {
iounmap(cstm_mips_ixx_map[i].virt);
cstm_mips_ixx_map[i].virt = NULL;
}
}
return -ENXIO;
}
}
return 0;
}
static void __exit cleanup_cstm_mips_ixx(void)
{
int i;
struct mtd_info *mymtd;
for (i=0;i<PHYSMAP_NUMBER;i++) {
mymtd = (struct mtd_info *)cstm_mips_ixx_map[i].map_priv_2;
if (mymtd) {
del_mtd_partitions(mymtd);
map_destroy(mymtd);
}
if (cstm_mips_ixx_map[i].virt) {
iounmap((void *)cstm_mips_ixx_map[i].virt);
cstm_mips_ixx_map[i].virt = 0;
}
}
}
module_init(init_cstm_mips_ixx);
module_exit(cleanup_cstm_mips_ixx);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
MODULE_DESCRIPTION("MTD map driver for MIPS boards");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment