Merge branch 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux

* 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
  perf: arm_spe: Enable ACPI/Platform automatic module loading
  arm_pmu: acpi: spe: Add initial MADT/SPE probing
  ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
  ACPI/PPTT: Modify node flag detection to find last IDENTICAL
  MAINTAINERS: Add maintainer entry for the imx8 DDR PMU driver
  drivers/perf: imx_ddr: Add DDR performance counter support to perf
  dt-bindings: perf: imx8-ddr: add imx8qxp ddr performance monitor

Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt

+* Freescale(NXP) IMX8 DDR performance monitor
+
+Required properties:
+
+- compatible: should be one of:
+	"fsl,imx8-ddr-pmu"
+	"fsl,imx8m-ddr-pmu"
+
+- reg: physical address and size
+
+- interrupts: single interrupt
+	generated by the control block
+
+Example:
+
+	ddr-pmu@5c020000 {
+		compatible = "fsl,imx8-ddr-pmu";
+		reg = <0x5c020000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+	};

MAINTAINERS

@@ -6328,6 +6328,13 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-cpm.c
 
+FREESCALE IMX DDR PMU DRIVER
+M:	Frank Li <Frank.li@nxp.com>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	drivers/perf/fsl_imx8_ddr_perf.c
+F:	Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt
+
 FREESCALE IMX LPI2C DRIVER
 M:	Dong Aisheng <aisheng.dong@nxp.com>
 L:	linux-i2c@vger.kernel.org

arch/arm64/include/asm/acpi.h

@@ -41,6 +41,9 @@
 	(!(entry) || (entry)->header.length < ACPI_MADT_GICC_MIN_LENGTH || \
 	(unsigned long)(entry) + (entry)->header.length > (end))
 
+#define ACPI_MADT_GICC_SPE  (ACPI_OFFSET(struct acpi_madt_generic_interrupt, \
+	spe_interrupt) + sizeof(u16))
+
 /* Basic configuration for ACPI */
 #ifdef	CONFIG_ACPI
 pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);

drivers/acpi/pptt.c

@@ -432,17 +432,40 @@ static void cache_setup_acpi_cpu(struct acpi_table_header *table,
 	}
 }
 
+static bool flag_identical(struct acpi_table_header *table_hdr,
+			   struct acpi_pptt_processor *cpu)
+{
+	struct acpi_pptt_processor *next;
+
+	/* heterogeneous machines must use PPTT revision > 1 */
+	if (table_hdr->revision < 2)
+		return false;
+
+	/* Locate the last node in the tree with IDENTICAL set */
+	if (cpu->flags & ACPI_PPTT_ACPI_IDENTICAL) {
+		next = fetch_pptt_node(table_hdr, cpu->parent);
+		if (!(next && next->flags & ACPI_PPTT_ACPI_IDENTICAL))
+			return true;
+	}
+
+	return false;
+}
+
 /* Passing level values greater than this will result in search termination */
 #define PPTT_ABORT_PACKAGE 0xFF
 
-static struct acpi_pptt_processor *acpi_find_processor_package_id(struct acpi_table_header *table_hdr,
-								  struct acpi_pptt_processor *cpu,
-								  int level, int flag)
+static struct acpi_pptt_processor *acpi_find_processor_tag(struct acpi_table_header *table_hdr,
+							   struct acpi_pptt_processor *cpu,
+							   int level, int flag)
 {
 	struct acpi_pptt_processor *prev_node;
 
 	while (cpu && level) {
-		if (cpu->flags & flag)
+		/* special case the identical flag to find last identical */
+		if (flag == ACPI_PPTT_ACPI_IDENTICAL) {
+			if (flag_identical(table_hdr, cpu))
+				break;
+		} else if (cpu->flags & flag)
 			break;
 		pr_debug("level %d\n", level);
 		prev_node = fetch_pptt_node(table_hdr, cpu->parent);
@@ -480,8 +503,8 @@ static int topology_get_acpi_cpu_tag(struct acpi_table_header *table,
 
 	cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
 	if (cpu_node) {
-		cpu_node = acpi_find_processor_package_id(table, cpu_node,
-							  level, flag);
+		cpu_node = acpi_find_processor_tag(table, cpu_node,
+						   level, flag);
 		/*
 		 * As per specification if the processor structure represents
 		 * an actual processor, then ACPI processor ID must be valid.
@@ -660,3 +683,29 @@ int find_acpi_cpu_topology_package(unsigned int cpu)
 	return find_acpi_cpu_topology_tag(cpu, PPTT_ABORT_PACKAGE,
 					  ACPI_PPTT_PHYSICAL_PACKAGE);
 }
+
+/**
+ * find_acpi_cpu_topology_hetero_id() - Get a core architecture tag
+ * @cpu: Kernel logical CPU number
+ *
+ * Determine a unique heterogeneous tag for the given CPU. CPUs with the same
+ * implementation should have matching tags.
+ *
+ * The returned tag can be used to group peers with identical implementation.
+ *
+ * The search terminates when a level is found with the identical implementation
+ * flag set or we reach a root node.
+ *
+ * Due to limitations in the PPTT data structure, there may be rare situations
+ * where two cores in a heterogeneous machine may be identical, but won't have
+ * the same tag.
+ *
+ * Return: -ENOENT if the PPTT doesn't exist, or the CPU cannot be found.
+ * Otherwise returns a value which represents a group of identical cores
+ * similar to this CPU.
+ */
+int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
+{
+	return find_acpi_cpu_topology_tag(cpu, PPTT_ABORT_PACKAGE,
+					  ACPI_PPTT_ACPI_IDENTICAL);
+}

drivers/perf/Kconfig

@@ -71,6 +71,14 @@ config ARM_DSU_PMU
 	  system, control logic. The PMU allows counting various events related
 	  to DSU.
 
+config FSL_IMX8_DDR_PMU
+	tristate "Freescale i.MX8 DDR perf monitor"
+	depends on ARCH_MXC
+	  help
+	  Provides support for the DDR performance monitor in i.MX8, which
+	  can give information about memory throughput and other related
+	  events.
+
 config HISI_PMU
        bool "HiSilicon SoC PMU"
        depends on ARM64 && ACPI

drivers/perf/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_ARM_DSU_PMU) += arm_dsu_pmu.o
 obj-$(CONFIG_ARM_PMU) += arm_pmu.o arm_pmu_platform.o
 obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
 obj-$(CONFIG_ARM_SMMU_V3_PMU) += arm_smmuv3_pmu.o
+obj-$(CONFIG_FSL_IMX8_DDR_PMU) += fsl_imx8_ddr_perf.o
 obj-$(CONFIG_HISI_PMU) += hisilicon/
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o

drivers/perf/arm_pmu_acpi.c

@@ -74,6 +74,76 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
 	acpi_unregister_gsi(gsi);
 }
 
+#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
+static struct resource spe_resources[] = {
+	{
+		/* irq */
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device spe_dev = {
+	.name = ARMV8_SPE_PDEV_NAME,
+	.id = -1,
+	.resource = spe_resources,
+	.num_resources = ARRAY_SIZE(spe_resources)
+};
+
+/*
+ * For lack of a better place, hook the normal PMU MADT walk
+ * and create a SPE device if we detect a recent MADT with
+ * a homogeneous PPI mapping.
+ */
+static void arm_spe_acpi_register_device(void)
+{
+	int cpu, hetid, irq, ret;
+	bool first = true;
+	u16 gsi = 0;
+
+	/*
+	 * Sanity check all the GICC tables for the same interrupt number.
+	 * For now, we only support homogeneous ACPI/SPE machines.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct acpi_madt_generic_interrupt *gicc;
+
+		gicc = acpi_cpu_get_madt_gicc(cpu);
+		if (gicc->header.length < ACPI_MADT_GICC_SPE)
+			return;
+
+		if (first) {
+			gsi = gicc->spe_interrupt;
+			if (!gsi)
+				return;
+			hetid = find_acpi_cpu_topology_hetero_id(cpu);
+			first = false;
+		} else if ((gsi != gicc->spe_interrupt) ||
+			   (hetid != find_acpi_cpu_topology_hetero_id(cpu))) {
+			pr_warn("ACPI: SPE must be homogeneous\n");
+			return;
+		}
+	}
+
+	irq = acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE,
+				ACPI_ACTIVE_HIGH);
+	if (irq < 0) {
+		pr_warn("ACPI: SPE Unable to register interrupt: %d\n", gsi);
+		return;
+	}
+
+	spe_resources[0].start = irq;
+	ret = platform_device_register(&spe_dev);
+	if (ret < 0) {
+		pr_warn("ACPI: SPE: Unable to register device\n");
+		acpi_unregister_gsi(gsi);
+	}
+}
+#else
+static inline void arm_spe_acpi_register_device(void)
+{
+}
+#endif /* CONFIG_ARM_SPE_PMU */
+
 static int arm_pmu_acpi_parse_irqs(void)
 {
 	int irq, cpu, irq_cpu, err;
@@ -279,6 +349,8 @@ static int arm_pmu_acpi_init(void)
 	if (acpi_disabled)
 		return 0;
 
+	arm_spe_acpi_register_device();
+
 	ret = arm_pmu_acpi_parse_irqs();
 	if (ret)
 		return ret;

drivers/perf/arm_spe_pmu.c

@@ -38,6 +38,7 @@
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/perf_event.h>
+#include <linux/perf/arm_pmu.h>
 #include <linux/platform_device.h>
 #include <linux/printk.h>
 #include <linux/slab.h>
@@ -1168,7 +1169,13 @@ static const struct of_device_id arm_spe_pmu_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, arm_spe_pmu_of_match);
 
-static int arm_spe_pmu_device_dt_probe(struct platform_device *pdev)
+static const struct platform_device_id arm_spe_match[] = {
+	{ ARMV8_SPE_PDEV_NAME, 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, arm_spe_match);
+
+static int arm_spe_pmu_device_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct arm_spe_pmu *spe_pmu;
@@ -1228,11 +1235,12 @@ static int arm_spe_pmu_device_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver arm_spe_pmu_driver = {
+	.id_table = arm_spe_match,
 	.driver	= {
 		.name		= DRVNAME,
 		.of_match_table	= of_match_ptr(arm_spe_pmu_of_match),
 	},
-	.probe	= arm_spe_pmu_device_dt_probe,
+	.probe	= arm_spe_pmu_device_probe,
 	.remove	= arm_spe_pmu_device_remove,
 };
 

include/linux/acpi.h

@@ -1303,6 +1303,7 @@ static inline int lpit_read_residency_count_address(u64 *address)
 #ifdef CONFIG_ACPI_PPTT
 int find_acpi_cpu_topology(unsigned int cpu, int level);
 int find_acpi_cpu_topology_package(unsigned int cpu);
+int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
 int find_acpi_cpu_cache_topology(unsigned int cpu, int level);
 #else
 static inline int find_acpi_cpu_topology(unsigned int cpu, int level)
@@ -1313,6 +1314,10 @@ static inline int find_acpi_cpu_topology_package(unsigned int cpu)
 {
 	return -EINVAL;
 }
+static inline int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
+{
+	return -EINVAL;
+}
 static inline int find_acpi_cpu_cache_topology(unsigned int cpu, int level)
 {
 	return -EINVAL;

include/linux/perf/arm_pmu.h

@@ -175,4 +175,6 @@ void armpmu_free_irq(int irq, int cpu);
 
 #endif /* CONFIG_ARM_PMU */
 
+#define ARMV8_SPE_PDEV_NAME "arm,spe-v1"
+
 #endif /* __ARM_PMU_H__ */