Commit 0e0aff21 authored by Jesper Nilsson's avatar Jesper Nilsson

CRIS: v10: remove all BKL usage

We don't need to take the BKL here.
Also fixes compile error after last commit (smp_lock.h was not included)
Signed-off-by: default avatarJesper Nilsson <jesper.nilsson@axis.com>
parent 60362158
......@@ -59,8 +59,8 @@ static const char i2c_name[] = "i2c";
#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
#define i2c_enable()
#define i2c_disable()
#define i2c_enable()
#define i2c_disable()
/* enable or disable output-enable, to select output or input on the i2c bus */
......@@ -90,7 +90,7 @@ static const char i2c_name[] = "i2c";
#define i2c_dir_out() \
*R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
#define i2c_dir_in() \
*R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0);
......@@ -188,7 +188,7 @@ i2c_outbyte(unsigned char x)
} else {
i2c_data(I2C_DATA_LOW);
}
i2c_delay(CLOCK_LOW_TIME/2);
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
......@@ -415,7 +415,7 @@ i2c_sendnack(void)
*#
*#--------------------------------------------------------------------------*/
int
i2c_writereg(unsigned char theSlave, unsigned char theReg,
i2c_writereg(unsigned char theSlave, unsigned char theReg,
unsigned char theValue)
{
int error, cntr = 3;
......@@ -467,7 +467,7 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
* enable interrupt again
*/
local_irq_restore(flags);
} while(error && cntr--);
i2c_delay(CLOCK_LOW_TIME);
......@@ -503,7 +503,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
* generate start condition
*/
i2c_start();
/*
* send slave address
*/
......@@ -554,7 +554,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
* enable interrupt again
*/
local_irq_restore(flags);
} while(error && cntr--);
spin_unlock(&i2c_lock);
......@@ -577,8 +577,7 @@ i2c_release(struct inode *inode, struct file *filp)
/* Main device API. ioctl's to write or read to/from i2c registers.
*/
static int
i2c_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
return -EINVAL;
......@@ -587,7 +586,7 @@ i2c_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
switch (_IOC_NR(cmd)) {
case I2C_WRITEREG:
/* write to an i2c slave */
D(printk("i2cw %d %d %d\n",
D(printk(KERN_DEBUG "i2cw %d %d %d\n",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg),
I2C_ARGVALUE(arg)));
......@@ -599,32 +598,20 @@ i2c_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned char val;
/* read from an i2c slave */
D(printk("i2cr %d %d ",
D(printk(KERN_DEBUG "i2cr %d %d ",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg)));
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
D(printk("= %d\n", val));
D(printk(KERN_DEBUG "= %d\n", val));
return val;
}
}
default:
return -EINVAL;
}
return 0;
}
static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
lock_kernel();
ret = i2c_ioctl_unlocked(file, cmd, arg);
unlock_kernel();
return ret;
}
static const struct file_operations i2c_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = i2c_ioctl,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment