Commit 0e80b9d1 authored by Larry Finger's avatar Larry Finger Committed by John W. Linville

rtlwifi: Make changes in rtlwifi/rtl8192ce/def.h to support rtl8192cu

This change modifies rtlwifi/rtl8192ce/def.h to handle rtl8192cu. In
addition, a couple of routines needed for both drivers are converted
to be inline.
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent a9dd5919
......@@ -121,11 +121,37 @@
#define CHIP_92C 0x01
#define CHIP_88C 0x00
/* Add vendor information into chip version definition.
* Add UMC B-Cut and RTL8723 chip info definition.
*
* BIT 7 Reserved
* BIT 6 UMC BCut
* BIT 5 Manufacturer(TSMC/UMC)
* BIT 4 TEST/NORMAL
* BIT 3 8723 Version
* BIT 2 8723?
* BIT 1 1T2R?
* BIT 0 88C/92C
*/
enum version_8192c {
VERSION_A_CHIP_92C = 0x01,
VERSION_A_CHIP_88C = 0x00,
VERSION_B_CHIP_92C = 0x11,
VERSION_B_CHIP_88C = 0x10,
VERSION_TEST_CHIP_88C = 0x00,
VERSION_TEST_CHIP_92C = 0x01,
VERSION_NORMAL_TSMC_CHIP_88C = 0x10,
VERSION_NORMAL_TSMC_CHIP_92C = 0x11,
VERSION_NORMAL_TSMC_CHIP_92C_1T2R = 0x13,
VERSION_NORMAL_UMC_CHIP_88C_A_CUT = 0x30,
VERSION_NORMAL_UMC_CHIP_92C_A_CUT = 0x31,
VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT = 0x33,
VERSION_NORMA_UMC_CHIP_8723_1T1R_A_CUT = 0x34,
VERSION_NORMA_UMC_CHIP_8723_1T1R_B_CUT = 0x3c,
VERSION_NORMAL_UMC_CHIP_88C_B_CUT = 0x70,
VERSION_NORMAL_UMC_CHIP_92C_B_CUT = 0x71,
VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT = 0x73,
VERSION_UNKNOWN = 0x88,
};
......@@ -254,4 +280,122 @@ struct h2c_cmd_8192c {
u8 *p_cmdbuffer;
};
static inline u8 _rtl92c_get_chnl_group(u8 chnl)
{
u8 group = 0;
if (chnl < 3)
group = 0;
else if (chnl < 9)
group = 1;
else
group = 2;
return group;
}
/* NOTE: reference to rtl8192c_rates struct */
static inline int _rtl92c_rate_mapping(struct ieee80211_hw *hw, bool isHT,
u8 desc_rate, bool first_ampdu)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
int rate_idx = 0;
if (first_ampdu) {
if (false == isHT) {
switch (desc_rate) {
case DESC92C_RATE1M:
rate_idx = 0;
break;
case DESC92C_RATE2M:
rate_idx = 1;
break;
case DESC92C_RATE5_5M:
rate_idx = 2;
break;
case DESC92C_RATE11M:
rate_idx = 3;
break;
case DESC92C_RATE6M:
rate_idx = 4;
break;
case DESC92C_RATE9M:
rate_idx = 5;
break;
case DESC92C_RATE12M:
rate_idx = 6;
break;
case DESC92C_RATE18M:
rate_idx = 7;
break;
case DESC92C_RATE24M:
rate_idx = 8;
break;
case DESC92C_RATE36M:
rate_idx = 9;
break;
case DESC92C_RATE48M:
rate_idx = 10;
break;
case DESC92C_RATE54M:
rate_idx = 11;
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
("Rate %d is not support, set to "
"1M rate.\n", desc_rate));
rate_idx = 0;
break;
}
} else {
rate_idx = 11;
}
return rate_idx;
}
switch (desc_rate) {
case DESC92C_RATE1M:
rate_idx = 0;
break;
case DESC92C_RATE2M:
rate_idx = 1;
break;
case DESC92C_RATE5_5M:
rate_idx = 2;
break;
case DESC92C_RATE11M:
rate_idx = 3;
break;
case DESC92C_RATE6M:
rate_idx = 4;
break;
case DESC92C_RATE9M:
rate_idx = 5;
break;
case DESC92C_RATE12M:
rate_idx = 6;
break;
case DESC92C_RATE18M:
rate_idx = 7;
break;
case DESC92C_RATE24M:
rate_idx = 8;
break;
case DESC92C_RATE36M:
rate_idx = 9;
break;
case DESC92C_RATE48M:
rate_idx = 10;
break;
case DESC92C_RATE54M:
rate_idx = 11;
break;
/* TODO: How to mapping MCS rate? */
/* NOTE: referenc to __ieee80211_rx */
default:
rate_idx = 11;
break;
}
return rate_idx;
}
#endif
......@@ -1335,19 +1335,6 @@ void rtl92ce_update_interrupt_mask(struct ieee80211_hw *hw,
rtl92ce_enable_interrupt(hw);
}
static u8 _rtl92c_get_chnl_group(u8 chnl)
{
u8 group;
if (chnl < 3)
group = 0;
else if (chnl < 9)
group = 1;
else
group = 2;
return group;
}
static void _rtl92ce_read_txpower_info_from_hwpg(struct ieee80211_hw *hw,
bool autoload_fail,
u8 *hwinfo)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment