ARM: dts: am437x-gp-evm: Add sleep state for beeper pins

Add sleep state for beeper pins. Without this there was a power
increase during the suspend and standby states on V3_3D domain.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -161,7 +161,8 @@ sound0_master: simple-audio-card,codec {
 	beeper: beeper {
 		compatible = "gpio-beeper";
 		pinctrl-names = "default";
-		pinctrl-0 = <&beeper_pins>;
+		pinctrl-0 = <&beeper_pins_default>;
+		pinctrl-1 = <&beeper_pins_sleep>;
 		gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
 	};
 };
@@ -523,12 +524,18 @@ AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
 		>;
 	};
 
-	beeper_pins: beeper_pins {
+	beeper_pins_default: beeper_pins_default {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_field.gpio4_12 */
 		>;
 	};
 
+	beeper_pins_sleep: beeper_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* cam1_field.gpio4_12 */
+		>;
+	};
+
 	unused_pins: unused_pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)