arm64: dts: exynos: Enable ir-spi in the TM2 and TM2E boards

Add the device tree node for the ir-spi driver which enables the
IR LED for remote controlling.

This patch sets first the GPR3[3] gpio line as a regulator-fixed
for enabling an external regulator which powers the IR LED.

Removes also the default assignment of GPG3[7] related to the
MOSI line of the SPI3 bus.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

@@ -106,6 +106,13 @@ max98504: max98504@31 {
 		};
 	};
 
+	irda_regulator: irda-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
+		regulator-name = "irda_regulator";
+	};
+
 	sound {
 		compatible = "samsung,tm2-audio";
 		audio-codec = <&wm5110>;
@@ -1074,7 +1081,6 @@ initial_peric: initial-state {
 		PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
 		PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
 		PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpg3-7, DOWN, FAST_SR1);
 	};
 };
 
@@ -1152,6 +1158,24 @@ controller-data {
 	};
 };
 
+&spi_3 {
+	status = "okay";
+	no-cs-readback;
+
+	irled@0 {
+		compatible = "ir-spi-led";
+		reg = <0x0>;
+		spi-max-frequency = <5000000>;
+		power-supply = <&irda_regulator>;
+		duty-cycle = <60>;
+		led-active-low;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
 &timer {
 	clock-frequency = <24000000>;
 };