Merge tag 'optee-i2c-for-v5.10' of...

Merge tag 'optee-i2c-for-v5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers

Enable i2c device access from OP-TEE RPC

Extends the OP-TEE RPC protocol to enable I2C device access. This allows
a driver in secure world to access devices on a normal world I2C bus.

* tag 'optee-i2c-for-v5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee:
  drivers: optee: allow op-tee to access devices on the i2c bus

Link: https://lore.kernel.org/r/20200821100532.GA1868056@jadeSigned-off-by: Olof Johansson <olof@lixom.net>

drivers/tee/optee/optee_msg.h

@@ -419,4 +419,25 @@ struct optee_msg_arg {
  */
 #define OPTEE_MSG_RPC_CMD_SHM_FREE	7
 
+/*
+ * Access a device on an i2c bus
+ *
+ * [in]  param[0].u.value.a		mode: RD(0), WR(1)
+ * [in]  param[0].u.value.b		i2c adapter
+ * [in]  param[0].u.value.c		i2c chip
+ *
+ * [in]  param[1].u.value.a		i2c control flags
+ *
+ * [in/out] memref[2]			buffer to exchange the transfer data
+ *					with the secure world
+ *
+ * [out]  param[3].u.value.a		bytes transferred by the driver
+ */
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21
+/* I2C master transfer modes */
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1
+/* I2C master control flags */
+#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT  BIT(0)
+
 #endif /* _OPTEE_MSG_H */

drivers/tee/optee/optee_private.h

@@ -17,6 +17,7 @@
 /* Some Global Platform error codes used in this driver */
 #define TEEC_SUCCESS			0x00000000
 #define TEEC_ERROR_BAD_PARAMETERS	0xFFFF0006
+#define TEEC_ERROR_NOT_SUPPORTED	0xFFFF000A
 #define TEEC_ERROR_COMMUNICATION	0xFFFF000E
 #define TEEC_ERROR_OUT_OF_MEMORY	0xFFFF000C
 #define TEEC_ERROR_SHORT_BUFFER		0xFFFF0010

drivers/tee/optee/rpc.c

@@ -7,6 +7,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/tee_drv.h>
 #include "optee_private.h"
@@ -49,6 +50,97 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
 	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
 }
 
+#if IS_ENABLED(CONFIG_I2C)
+static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
+					     struct optee_msg_arg *arg)
+{
+	struct i2c_client client = { 0 };
+	struct tee_param *params;
+	size_t i;
+	int ret = -EOPNOTSUPP;
+	u8 attr[] = {
+		TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+		TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+		TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT,
+		TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT,
+	};
+
+	if (arg->num_params != ARRAY_SIZE(attr)) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	params = kmalloc_array(arg->num_params, sizeof(struct tee_param),
+			       GFP_KERNEL);
+	if (!params) {
+		arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+		return;
+	}
+
+	if (optee_from_msg_param(params, arg->num_params, arg->params))
+		goto bad;
+
+	for (i = 0; i < arg->num_params; i++) {
+		if (params[i].attr != attr[i])
+			goto bad;
+	}
+
+	client.adapter = i2c_get_adapter(params[0].u.value.b);
+	if (!client.adapter)
+		goto bad;
+
+	if (params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) {
+		if (!i2c_check_functionality(client.adapter,
+					     I2C_FUNC_10BIT_ADDR)) {
+			i2c_put_adapter(client.adapter);
+			goto bad;
+		}
+
+		client.flags = I2C_CLIENT_TEN;
+	}
+
+	client.addr = params[0].u.value.c;
+	snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr);
+
+	switch (params[0].u.value.a) {
+	case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD:
+		ret = i2c_master_recv(&client, params[2].u.memref.shm->kaddr,
+				      params[2].u.memref.size);
+		break;
+	case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR:
+		ret = i2c_master_send(&client, params[2].u.memref.shm->kaddr,
+				      params[2].u.memref.size);
+		break;
+	default:
+		i2c_put_adapter(client.adapter);
+		goto bad;
+	}
+
+	if (ret < 0) {
+		arg->ret = TEEC_ERROR_COMMUNICATION;
+	} else {
+		params[3].u.value.a = ret;
+		if (optee_to_msg_param(arg->params, arg->num_params, params))
+			arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		else
+			arg->ret = TEEC_SUCCESS;
+	}
+
+	i2c_put_adapter(client.adapter);
+	kfree(params);
+	return;
+bad:
+	kfree(params);
+	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+#else
+static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
+					     struct optee_msg_arg *arg)
+{
+	arg->ret = TEEC_ERROR_NOT_SUPPORTED;
+}
+#endif
+
 static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key)
 {
 	struct wq_entry *w;
@@ -382,6 +474,9 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
 	case OPTEE_MSG_RPC_CMD_SHM_FREE:
 		handle_rpc_func_cmd_shm_free(ctx, arg);
 		break;
+	case OPTEE_MSG_RPC_CMD_I2C_TRANSFER:
+		handle_rpc_func_cmd_i2c_transfer(ctx, arg);
+		break;
 	default:
 		handle_rpc_supp_cmd(ctx, arg);
 	}