Commit 0ff4673f authored by Keith Packard's avatar Keith Packard Committed by Sasha Levin

ALSA: hda/realtek: Enable HP amp and mute LED on HP Folio 9480m [v3]

[ Upstream commit 98973f2f ]

This laptop needs GPIO4 pulled high to enable the headphone amplifier,
and has a mute LED on GPIO3. I modelled the patch on the existing
GPIO4 code which pulls the line low for the same purpose; this time,
the HP amp line is pulled high.

v2: Disable the headphone amplifier when no headphone is connected.
    Don't disable power savings to preserve the LED state.

v3: Remove headset-specific hooks and code; this is just a headphone.
Signed-off-by: default avatarKeith Packard <keithp@keithp.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
parent b8463d76
......@@ -4552,6 +4552,55 @@ static void alc290_fixup_mono_speakers(struct hda_codec *codec,
}
}
/* Hook to update amp GPIO4 for automute */
static void alc280_hp_gpio4_automute_hook(struct hda_codec *codec,
struct hda_jack_callback *jack)
{
struct alc_spec *spec = codec->spec;
snd_hda_gen_hp_automute(codec, jack);
/* mute_led_polarity is set to 0, so we pass inverted value here */
alc_update_gpio_led(codec, 0x10, !spec->gen.hp_jack_present);
}
/* Manage GPIOs for HP EliteBook Folio 9480m.
*
* GPIO4 is the headphone amplifier power control
* GPIO3 is the audio output mute indicator LED
*/
static void alc280_fixup_hp_9480m(struct hda_codec *codec,
const struct hda_fixup *fix,
int action)
{
struct alc_spec *spec = codec->spec;
static const struct hda_verb gpio_init[] = {
{ 0x01, AC_VERB_SET_GPIO_MASK, 0x18 },
{ 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x18 },
{}
};
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
/* Set the hooks to turn the headphone amp on/off
* as needed
*/
spec->gen.vmaster_mute.hook = alc_fixup_gpio_mute_hook;
spec->gen.hp_automute_hook = alc280_hp_gpio4_automute_hook;
/* The GPIOs are currently off */
spec->gpio_led = 0;
/* GPIO3 is connected to the output mute LED,
* high is on, low is off
*/
spec->mute_led_polarity = 0;
spec->gpio_mute_led_mask = 0x08;
/* Initialize GPIO configuration */
snd_hda_add_verbs(codec, gpio_init);
}
}
/* for hda_fixup_thinkpad_acpi() */
#include "thinkpad_helper.c"
......@@ -4633,6 +4682,7 @@ enum {
ALC286_FIXUP_HP_GPIO_LED,
ALC280_FIXUP_HP_GPIO2_MIC_HOTKEY,
ALC280_FIXUP_HP_DOCK_PINS,
ALC280_FIXUP_HP_9480M,
ALC288_FIXUP_DELL_HEADSET_MODE,
ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC288_FIXUP_DELL_XPS_13_GPIO6,
......@@ -5165,6 +5215,10 @@ static const struct hda_fixup alc269_fixups[] = {
.chained = true,
.chain_id = ALC280_FIXUP_HP_GPIO4
},
[ALC280_FIXUP_HP_9480M] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc280_fixup_hp_9480m,
},
[ALC288_FIXUP_DELL_HEADSET_MODE] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_headset_mode_dell_alc288,
......@@ -5320,6 +5374,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x22b7, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22bf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22db, "HP", ALC280_FIXUP_HP_9480M),
SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
/* ALC290 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment