[ARM] 5426/1: h3600: remove clr_h3600_egpio/set_h3600_egpio helpers

Replace all occurences with assign_h3600_egpio.
Also simplify code a bit by replacing couple of if-else
statements with one-line equivalents.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-sa1100/h3600.c

@@ -92,11 +92,7 @@ static int h3600_irda_set_power(struct device *dev, unsigned int state)
 
 static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
 {
-	if (speed < 4000000) {
-		clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
-	} else {
-		set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
-	}
+	assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
 }
 
 static struct irda_platform_data h3600_irda_data = {

arch/arm/mach-sa1100/include/mach/h3600.h

@@ -105,19 +105,6 @@ static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
 		ipaq_model_ops.control(x,level);
 }
 
-static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,0);
-}
-
-static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,1);
-}
-
-
 #endif /* ASSEMBLY */
 
 #endif /* _INCLUDE_H3600_H_ */

drivers/pcmcia/sa1100_h3600.c

@@ -37,9 +37,9 @@ static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
   
 	/* Disable CF bus: */
-	clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
-	clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
-	set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
 }
 
 static void
@@ -79,10 +79,7 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_
 		return -1;
 	}
 
-	if (state->flags & SS_RESET)
-		set_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
-	else
-		clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
+	assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
 
 	/* Silently ignore Vpp, output enable, speaker enable. */
 
@@ -92,9 +89,9 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_
 static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 {
 	/* Enable CF bus: */
-	set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
-	set_h3600_egpio(IPAQ_EGPIO_OPT_ON);
-	clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0);
 
 	msleep(10);
 
@@ -112,10 +109,10 @@ static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 	 * socket 0 then socket 1.
 	 */
 	if (skt->nr == 1) {
-		clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
-		clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
+		assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
+		assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
 		/* hmm, does this suck power? */
-		set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+		assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
 	}
 }