arm64: dts: renesas: r8a77980: use SYSC power domain macros

Now that the commit 7755b40d ("dt-bindings: power: add R8A77980 SYSC
power domain definitions") has hit Linus' tree, we can replace  the bare
numbers (we had to use to avoid a cross tree dependency) with these macro
definitions...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

arch/arm64/boot/dts/renesas/r8a77980.dtsi

@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/r8a77980-cpg-mssr.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77980-sysc.h>
 
 / {
 	compatible = "renesas,r8a77980";
@@ -24,14 +25,14 @@ a53_0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0>;
 			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
-			power-domains = <&sysc 5>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU0>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
 		};
 
 		L2_CA53: cache-controller {
 			compatible = "cache";
-			power-domains = <&sysc 21>;
+			power-domains = <&sysc R8A77980_PD_CA53_SCU>;
 			cache-unified;
 			cache-level = <2>;
 		};
@@ -110,7 +111,7 @@ hscif0: serial@e6540000 {
 			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
 			       <&dmac2 0x31>, <&dmac2 0x30>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 520>;
 			status = "disabled";
 		};
@@ -128,7 +129,7 @@ hscif1: serial@e6550000 {
 			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
 			       <&dmac2 0x33>, <&dmac2 0x32>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 519>;
 			status = "disabled";
 		};
@@ -146,7 +147,7 @@ hscif2: serial@e6560000 {
 			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
 			       <&dmac2 0x35>, <&dmac2 0x34>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 518>;
 			status = "disabled";
 		};
@@ -164,7 +165,7 @@ hscif3: serial@e66a0000 {
 			dmas = <&dmac1 0x37>, <&dmac1 0x36>,
 			       <&dmac2 0x37>, <&dmac2 0x36>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 517>;
 			status = "disabled";
 		};
@@ -206,7 +207,7 @@ avb: ethernet@e6800000 {
 					  "ch20", "ch21", "ch22", "ch23",
 					  "ch24";
 			clocks = <&cpg CPG_MOD 812>;
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
 			#address-cells = <1>;
@@ -226,7 +227,7 @@ scif0: serial@e6e60000 {
 			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
 			       <&dmac2 0x51>, <&dmac2 0x50>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 207>;
 			status = "disabled";
 		};
@@ -244,7 +245,7 @@ scif1: serial@e6e68000 {
 			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
 			       <&dmac2 0x53>, <&dmac2 0x52>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 206>;
 			status = "disabled";
 		};
@@ -262,7 +263,7 @@ scif3: serial@e6c50000 {
 			dmas = <&dmac1 0x57>, <&dmac1 0x56>,
 			       <&dmac2 0x57>, <&dmac2 0x56>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 204>;
 			status = "disabled";
 		};
@@ -280,7 +281,7 @@ scif4: serial@e6c40000 {
 			dmas = <&dmac1 0x59>, <&dmac1 0x58>,
 			       <&dmac2 0x59>, <&dmac2 0x58>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 203>;
 			status = "disabled";
 		};
@@ -313,7 +314,7 @@ GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH
 					  "ch12", "ch13", "ch14", "ch15";
 			clocks = <&cpg CPG_MOD 218>;
 			clock-names = "fck";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
@@ -347,7 +348,7 @@ GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH
 					  "ch12", "ch13", "ch14", "ch15";
 			clocks = <&cpg CPG_MOD 217>;
 			clock-names = "fck";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 217>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
@@ -359,7 +360,7 @@ mmc0: mmc@ee140000 {
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 314>;
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
 			max-frequency = <200000000>;
 			status = "disabled";
@@ -378,7 +379,7 @@ gic: interrupt-controller@f1010000 {
 				      IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 408>;
 		};