bnxt_en: Update to Firmware 1.2.2 spec.

Use new field names in API structs and stop using deprecated fields
auto_link_speed and auto_duplex in phy_cfg/phy_qcfg structs.

Update copyright year to 2016.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnxt/bnxt.c

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -2763,7 +2763,7 @@ static int bnxt_hwrm_func_drv_rgtr(struct bnxt *bp)
 	 * only checks if it is non-zero to enable async event forwarding
 	 */
 	req.async_event_fwd[0] |= cpu_to_le32(1);
-	req.os_type = cpu_to_le16(1);
+	req.os_type = cpu_to_le16(FUNC_DRV_RGTR_REQ_OS_TYPE_LINUX);
 	req.ver_maj = DRV_VER_MAJ;
 	req.ver_min = DRV_VER_MIN;
 	req.ver_upd = DRV_VER_UPD;
@@ -3726,7 +3726,7 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
 
 		pf->fw_fid = le16_to_cpu(resp->fid);
 		pf->port_id = le16_to_cpu(resp->port_id);
-		memcpy(pf->mac_addr, resp->perm_mac_address, ETH_ALEN);
+		memcpy(pf->mac_addr, resp->mac_address, ETH_ALEN);
 		memcpy(bp->dev->dev_addr, pf->mac_addr, ETH_ALEN);
 		pf->max_rsscos_ctxs = le16_to_cpu(resp->max_rsscos_ctx);
 		pf->max_cp_rings = le16_to_cpu(resp->max_cmpl_rings);
@@ -3751,7 +3751,7 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
 		struct bnxt_vf_info *vf = &bp->vf;
 
 		vf->fw_fid = le16_to_cpu(resp->fid);
-		memcpy(vf->mac_addr, resp->perm_mac_address, ETH_ALEN);
+		memcpy(vf->mac_addr, resp->mac_address, ETH_ALEN);
 		if (is_valid_ether_addr(vf->mac_addr))
 			/* overwrite netdev dev_adr with admin VF MAC */
 			memcpy(bp->dev->dev_addr, vf->mac_addr, ETH_ALEN);
@@ -3842,6 +3842,8 @@ static int bnxt_hwrm_ver_get(struct bnxt *bp)
 
 	memcpy(&bp->ver_resp, resp, sizeof(struct hwrm_ver_get_output));
 
+	bp->hwrm_spec_code = resp->hwrm_intf_maj << 16 |
+			     resp->hwrm_intf_min << 8 | resp->hwrm_intf_upd;
 	if (resp->hwrm_intf_maj < 1) {
 		netdev_warn(bp->dev, "HWRM interface %d.%d.%d is older than 1.0.0.\n",
 			    resp->hwrm_intf_maj, resp->hwrm_intf_min,
@@ -4523,7 +4525,6 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
 	else
 		link_info->link_speed = 0;
 	link_info->force_link_speed = le16_to_cpu(resp->force_link_speed);
-	link_info->auto_link_speed = le16_to_cpu(resp->auto_link_speed);
 	link_info->support_speeds = le16_to_cpu(resp->support_speeds);
 	link_info->auto_link_speeds = le16_to_cpu(resp->auto_link_speed_mask);
 	link_info->lp_auto_link_speeds =
@@ -4533,8 +4534,8 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
 	link_info->phy_ver[1] = resp->phy_min;
 	link_info->phy_ver[2] = resp->phy_bld;
 	link_info->media_type = resp->media_type;
-	link_info->transceiver = resp->transceiver_type;
-	link_info->phy_addr = resp->phy_addr;
+	link_info->transceiver = resp->xcvr_pkg_type;
+	link_info->phy_addr = resp->eee_config_phy_addr;
 
 	/* TODO: need to add more logic to report VF link */
 	if (chng_link_state) {
@@ -4581,7 +4582,7 @@ static void bnxt_hwrm_set_link_common(struct bnxt *bp,
 
 	if (autoneg & BNXT_AUTONEG_SPEED) {
 		req->auto_mode |=
-			PORT_PHY_CFG_REQ_AUTO_MODE_MASK;
+			PORT_PHY_CFG_REQ_AUTO_MODE_SPEED_MASK;
 
 		req->enables |= cpu_to_le32(
 			PORT_PHY_CFG_REQ_ENABLES_AUTO_LINK_SPEED_MASK);
@@ -4595,9 +4596,6 @@ static void bnxt_hwrm_set_link_common(struct bnxt *bp,
 		req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_FORCE);
 	}
 
-	/* currently don't support half duplex */
-	req->auto_duplex = PORT_PHY_CFG_REQ_AUTO_DUPLEX_FULL;
-	req->enables |= cpu_to_le32(PORT_PHY_CFG_REQ_ENABLES_AUTO_DUPLEX);
 	/* tell chimp that the setting takes effect immediately */
 	req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_RESET_PHY);
 }

drivers/net/ethernet/broadcom/bnxt/bnxt.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -11,7 +11,7 @@
 #define BNXT_H
 
 #define DRV_MODULE_NAME		"bnxt_en"
-#define DRV_MODULE_VERSION	"1.0.0"
+#define DRV_MODULE_VERSION	"1.2.0"
 
 #define DRV_VER_MAJ	1
 #define DRV_VER_MIN	0
@@ -788,7 +788,7 @@ struct bnxt_link_info {
 #define BNXT_LINK_AUTO_ALLSPDS	PORT_PHY_QCFG_RESP_AUTO_MODE_ALL_SPEEDS
 #define BNXT_LINK_AUTO_ONESPD	PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_SPEED
 #define BNXT_LINK_AUTO_ONEORBELOW PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_OR_BELOW
-#define BNXT_LINK_AUTO_MSK	PORT_PHY_QCFG_RESP_AUTO_MODE_MASK
+#define BNXT_LINK_AUTO_MSK	PORT_PHY_QCFG_RESP_AUTO_MODE_SPEED_MASK
 #define PHY_VER_LEN		3
 	u8			phy_ver[PHY_VER_LEN];
 	u16			link_speed;
@@ -813,7 +813,6 @@ struct bnxt_link_info {
 #define BNXT_LINK_SPEED_MSK_40GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_40GB
 #define BNXT_LINK_SPEED_MSK_50GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_50GB
 	u16			lp_auto_link_speeds;
-	u16			auto_link_speed;
 	u16			force_link_speed;
 	u32			preemphasis;
 
@@ -940,6 +939,7 @@ struct bnxt {
 
 	u32			msg_enable;
 
+	u32			hwrm_spec_code;
 	u16			hwrm_cmd_seq;
 	u32			hwrm_intr_seq_id;
 	void			*hwrm_cmd_resp_addr;

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -728,7 +728,7 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	ethtool_speed = bnxt_fw_to_ethtool_speed(link_info->link_speed);
 	ethtool_cmd_speed_set(cmd, ethtool_speed);
 	if (link_info->transceiver ==
-		PORT_PHY_QCFG_RESP_TRANSCEIVER_TYPE_XCVR_INTERNAL)
+	    PORT_PHY_QCFG_RESP_XCVR_PKG_TYPE_XCVR_INTERNAL)
 		cmd->transceiver = XCVR_INTERNAL;
 	else
 		cmd->transceiver = XCVR_EXTERNAL;

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -771,12 +771,8 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf)
 			    PORT_PHY_QCFG_RESP_LINK_NO_LINK) {
 				phy_qcfg_resp.link =
 					PORT_PHY_QCFG_RESP_LINK_LINK;
-				if (phy_qcfg_resp.auto_link_speed)
-					phy_qcfg_resp.link_speed =
-						phy_qcfg_resp.auto_link_speed;
-				else
-					phy_qcfg_resp.link_speed =
-						phy_qcfg_resp.force_link_speed;
+				phy_qcfg_resp.link_speed = cpu_to_le16(
+					PORT_PHY_QCFG_RESP_LINK_SPEED_10GB);
 				phy_qcfg_resp.duplex =
 					PORT_PHY_QCFG_RESP_DUPLEX_FULL;
 				phy_qcfg_resp.pause =
@@ -859,8 +855,8 @@ void bnxt_update_vf_mac(struct bnxt *bp)
 	 *    default but the stored zero MAC will allow the VF user to change
 	 *    the random MAC address using ndo_set_mac_address() if he wants.
 	 */
-	if (!ether_addr_equal(resp->perm_mac_address, bp->vf.mac_addr))
-		memcpy(bp->vf.mac_addr, resp->perm_mac_address, ETH_ALEN);
+	if (!ether_addr_equal(resp->mac_address, bp->vf.mac_addr))
+		memcpy(bp->vf.mac_addr, resp->mac_address, ETH_ALEN);
 
 	/* overwrite netdev dev_addr with admin VF MAC */
 	if (is_valid_ether_addr(bp->vf.mac_addr))

drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by