ARM: dts: Drop pointless status changing for am3 musb

The default is enabled, and there should be no need to reconfigure
the status for SoC internal devices in the board specific files.

Only the USB PHY used needs to be configured in the board specific
files.

Cc: Bin Liu <b-liu@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am335x-baltos.dtsi

@@ -258,18 +258,6 @@ at24@50 {
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
 #include "tps65910.dtsi"
 
 &tps {

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -191,38 +191,16 @@ &uart0 {
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "peripheral";
 	interrupts-extended = <&intc 18 &tps 0>;
 	interrupt-names = "mc", "vbus";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;

arch/arm/boot/dts/am335x-boneblue.dts

@@ -278,38 +278,16 @@ &uart5 {
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "peripheral";
 	interrupts-extended = <&intc 18 &tps 0>;
 	interrupt-names = "mc", "vbus";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &i2c0 {
 	baseboard_eeprom: baseboard_eeprom@50 {
 		compatible = "atmel,24c256";

arch/arm/boot/dts/am335x-chiliboard.dts

@@ -153,30 +153,12 @@ &cpsw_emac0 {
 };
 
 /* USB */
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_drvvbus>;
-
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 /* microSD */
 &mmc1 {
 	pinctrl-names = "default";

arch/arm/boot/dts/am335x-cm-t335.dts

@@ -330,26 +330,6 @@ tlv320aic23: codec@1a {
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
 &epwmss0 {
 	status = "okay";
 

arch/arm/boot/dts/am335x-evm.dts

@@ -433,35 +433,10 @@ tps: tps@2d {
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;

arch/arm/boot/dts/am335x-evmsk.dts

@@ -523,35 +523,10 @@ tlv320aic3106: tlv320aic3106@1b {
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &epwmss2 {
 	status = "okay";
 

arch/arm/boot/dts/am335x-guardian.dts

@@ -115,10 +115,6 @@ vmmcsd_fixed: regulator-3v3 {
 	};
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &elm {
 	status = "okay";
 };
@@ -328,30 +324,12 @@ &uart0 {
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
 &usb0 {
 	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
 };
 
 &usb1 {
 	dr_mode = "host";
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
 };
 
 &am33xx_pinmux {

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -217,35 +217,10 @@ &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 #include "tps65910.dtsi"
 
 &tps {

arch/arm/boot/dts/am335x-lxm.dts

@@ -283,36 +283,14 @@ &uart0 {
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "host";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";

arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi

@@ -111,27 +111,10 @@ rtc_wdt: rtc_wdt@68 {
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 /* Power */
 &vbat {
 	regulator-name = "vbat";

arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts

@@ -290,36 +290,14 @@ gpio_xten: gpio_xten@27 {
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "host";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 #include "tps65910.dtsi"
 
 &tps {

arch/arm/boot/dts/am335x-osd3358-sm-red.dts

@@ -384,38 +384,16 @@ &uart0 {
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "peripheral";
 	interrupts-extended = <&intc 18 &tps 0>;
 	interrupt-names = "mc", "vbus";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;

arch/arm/boot/dts/am335x-pcm-953.dtsi

@@ -237,31 +237,6 @@ &uart3 {
 };
 
 /* USB */
-&cppi41dma {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
-
-&usb1_phy {
-	status = "okay";
-};

arch/arm/boot/dts/am335x-pdu001.dts

@@ -384,34 +384,6 @@ display-controller@0 {
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
 /*
  * Disable soc's rtc as we have no VBAT for it. This makes the board
  * rtc (Microchip MCP79400) the default rtc device 'rtc0'.

arch/arm/boot/dts/am335x-pepper.dts

@@ -552,38 +552,18 @@ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 
 /* USB */
 &usb {
-	status = "okay";
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb_pins>;
 };
 
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
         dr_mode = "host";
 };
 
 &usb1 {
-	status = "okay";
         dr_mode = "host";
 };
 
-&cppi41dma {
-	status = "okay";
-};
-
 &am33xx_pinmux {
 	usb_pins: pinmux_usb {
 		pinctrl-single,pins = <

arch/arm/boot/dts/am335x-pocketbeagle.dts

@@ -206,32 +206,10 @@ &uart4 {
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "otg";
 };
 
-&usb1_phy {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
-
-&cppi41dma  {
-	status = "okay";
-};

arch/arm/boot/dts/am335x-regor.dtsi

@@ -200,24 +200,3 @@ &uart1 {
 	status = "okay";
 	linux,rs485-enabled-at-boot-time;
 };
-
-/* USB */
-&cppi41dma {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};

arch/arm/boot/dts/am335x-shc.dts

@@ -117,10 +117,6 @@ &aes {
 	status = "okay";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
@@ -358,20 +354,7 @@ &uart4 {
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 

arch/arm/boot/dts/am335x-sl50.dts

@@ -512,36 +512,14 @@ &rtc {
 	status = "disabled";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "otg";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &mmc1 {
 	status = "okay";
 	pinctrl-names = "default";

arch/arm/boot/dts/am335x-wega.dtsi

@@ -191,32 +191,6 @@ &uart1 {
 	status = "okay";
 };
 
-/* USB */
-&cppi41dma {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
 &usb1 {
 	dr_mode = "host";
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
 };