net: ena: cosmetic: fix spelling and grammar mistakes in comments

fix spelling and grammar mistakes in comments in ena_com.h,
ena_com.c and ena_netdev.c
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amazon/ena/ena_com.c

@@ -772,7 +772,7 @@ static int ena_com_wait_and_process_admin_cq_interrupts(struct ena_comp_ctx *com
 			if (admin_queue->auto_polling)
 				admin_queue->polling = true;
 		} else {
-			pr_err("The ena device doesn't send a completion for the admin cmd %d status %d\n",
+			pr_err("The ena device didn't send a completion for the admin cmd %d status %d\n",
 			       comp_ctx->cmd_opcode, comp_ctx->status);
 		}
 		/* Check if shifted to polling mode.

drivers/net/ethernet/amazon/ena/ena_com.h

@@ -393,7 +393,7 @@ struct ena_aenq_handlers {
  */
 int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev);
 
-/* ena_com_set_mmio_read_mode - Enable/disable the mmio reg read mechanism
+/* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism
  * @ena_dev: ENA communication layer struct
  * @readless_supported: readless mode (enable/disable)
  */
@@ -515,7 +515,7 @@ void ena_com_set_admin_auto_polling_mode(struct ena_com_dev *ena_dev,
 /* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler
  * @ena_dev: ENA communication layer struct
  *
- * This method go over the admin completion queue and wake up all the pending
+ * This method goes over the admin completion queue and wakes up all the pending
  * threads that wait on the commands wait event.
  *
  * @note: Should be called after MSI-X interrupt.
@@ -525,7 +525,7 @@ void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev);
 /* ena_com_aenq_intr_handler - AENQ interrupt handler
  * @ena_dev: ENA communication layer struct
  *
- * This method go over the async event notification queue and call the proper
+ * This method goes over the async event notification queue and calls the proper
  * aenq handler.
  */
 void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data);
@@ -542,14 +542,14 @@ void ena_com_abort_admin_commands(struct ena_com_dev *ena_dev);
 /* ena_com_wait_for_abort_completion - Wait for admin commands abort.
  * @ena_dev: ENA communication layer struct
  *
- * This method wait until all the outstanding admin commands will be completed.
+ * This method waits until all the outstanding admin commands are completed.
  */
 void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev);
 
 /* ena_com_validate_version - Validate the device parameters
  * @ena_dev: ENA communication layer struct
  *
- * This method validate the device parameters are the same as the saved
+ * This method verifies the device parameters are the same as the saved
  * parameters in ena_dev.
  * This method is useful after device reset, to validate the device mac address
  * and the device offloads are the same as before the reset.
@@ -689,7 +689,7 @@ int ena_com_set_hash_function(struct ena_com_dev *ena_dev);
  *
  * Retrieve the hash function from the device.
  *
- * @note: If the caller called ena_com_fill_hash_function but didn't flash
+ * @note: If the caller called ena_com_fill_hash_function but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -703,7 +703,7 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
  *
  * Retrieve the hash key.
  *
- * @note: If the caller called ena_com_fill_hash_key but didn't flash
+ * @note: If the caller called ena_com_fill_hash_key but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -743,7 +743,7 @@ int ena_com_set_hash_ctrl(struct ena_com_dev *ena_dev);
  *
  * Retrieve the hash control from the device.
  *
- * @note, If the caller called ena_com_fill_hash_ctrl but didn't flash
+ * @note: If the caller called ena_com_fill_hash_ctrl but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -795,7 +795,7 @@ int ena_com_indirect_table_set(struct ena_com_dev *ena_dev);
  *
  * Retrieve the RSS indirection table from the device.
  *
- * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flash
+ * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -821,14 +821,14 @@ int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev,
 /* ena_com_delete_debug_area - Free the debug area resources.
  * @ena_dev: ENA communication layer struct
  *
- * Free the allocate debug area.
+ * Free the allocated debug area.
  */
 void ena_com_delete_debug_area(struct ena_com_dev *ena_dev);
 
 /* ena_com_delete_host_info - Free the host info resources.
  * @ena_dev: ENA communication layer struct
  *
- * Free the allocate host info.
+ * Free the allocated host info.
  */
 void ena_com_delete_host_info(struct ena_com_dev *ena_dev);
 
@@ -869,9 +869,9 @@ int ena_com_destroy_io_cq(struct ena_com_dev *ena_dev,
  * @cmd_completion: command completion return value.
  * @cmd_comp_size: command completion size.
 
- * Submit an admin command and then wait until the device will return a
+ * Submit an admin command and then wait until the device returns a
  * completion.
- * The completion will be copyed into cmd_comp.
+ * The completion will be copied into cmd_comp.
  *
  * @return - 0 on success, negative value on failure.
  */
@@ -934,7 +934,7 @@ unsigned int ena_com_get_nonadaptive_moderation_interval_rx(struct ena_com_dev *
 /* ena_com_config_dev_mode - Configure the placement policy of the device.
  * @ena_dev: ENA communication layer struct
  * @llq_features: LLQ feature descriptor, retrieve via
- *                ena_com_get_dev_attr_feat.
+ *		   ena_com_get_dev_attr_feat.
  * @ena_llq_config: The default driver LLQ parameters configurations
  */
 int ena_com_config_dev_mode(struct ena_com_dev *ena_dev,
@@ -960,7 +960,7 @@ static inline void ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_d
  * @intr_reg: interrupt register to update.
  * @rx_delay_interval: Rx interval in usecs
  * @tx_delay_interval: Tx interval in usecs
- * @unmask: unask enable/disable
+ * @unmask: unmask enable/disable
  *
  * Prepare interrupt update register with the supplied parameters.
  */

drivers/net/ethernet/amazon/ena/ena_netdev.c

@@ -4190,7 +4190,7 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	calc_queue_ctx.get_feat_ctx = &get_feat_ctx;
 	calc_queue_ctx.pdev = pdev;
 
-	/* Initial Tx and RX interrupt delay. Assumes 1 usec granularity.
+	/* Initial TX and RX interrupt delay. Assumes 1 usec granularity.
 	 * Updated during device initialization with the real granularity
 	 */
 	ena_dev->intr_moder_tx_interval = ENA_INTR_INITIAL_TX_INTERVAL_USECS;