Commit 13ab6aeb authored by Nicolas Ferre's avatar Nicolas Ferre

ARM: at91: change "Unknown" qualifier SoC subtype handling

An AT91 SoC that doesn't have a subtype is shown as "Unknown"
in the Linux log message which is not correct.
This was leading to confusion so, add a "none" qualifier to
the subtype property and set this one in the appropriate cases.
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 471c9e78
......@@ -86,7 +86,7 @@ enum at91_soc_type {
AT91_SOC_SAMA5D3,
/* Unknown type */
AT91_SOC_NONE
AT91_SOC_UNKNOWN,
};
enum at91_soc_subtype {
......@@ -107,8 +107,11 @@ enum at91_soc_subtype {
AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
AT91_SOC_SAMA5D35,
/* No subtype for this SoC */
AT91_SOC_SUBTYPE_NONE,
/* Unknown subtype */
AT91_SOC_SUBTYPE_NONE
AT91_SOC_SUBTYPE_UNKNOWN,
};
struct at91_socinfo {
......@@ -122,7 +125,7 @@ const char *at91_get_soc_subtype(struct at91_socinfo *c);
static inline int at91_soc_is_detected(void)
{
return at91_soc_initdata.type != AT91_SOC_NONE;
return at91_soc_initdata.type != AT91_SOC_UNKNOWN;
}
#ifdef CONFIG_SOC_AT91RM9200
......
......@@ -105,28 +105,32 @@ static void __init soc_detect(u32 dbgu_base)
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
at91_boot_soc = at91rm9200_soc;
break;
case ARCH_ID_AT91SAM9260:
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9260_soc;
break;
case ARCH_ID_AT91SAM9261:
at91_soc_initdata.type = AT91_SOC_SAM9261;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9261_soc;
break;
case ARCH_ID_AT91SAM9263:
at91_soc_initdata.type = AT91_SOC_SAM9263;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9263_soc;
break;
case ARCH_ID_AT91SAM9G20:
at91_soc_initdata.type = AT91_SOC_SAM9G20;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9260_soc;
break;
......@@ -139,6 +143,7 @@ static void __init soc_detect(u32 dbgu_base)
case ARCH_ID_AT91SAM9RL64:
at91_soc_initdata.type = AT91_SOC_SAM9RL;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9rl_soc;
break;
......@@ -161,6 +166,7 @@ static void __init soc_detect(u32 dbgu_base)
/* at91sam9g10 */
if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9261_soc;
}
/* at91sam9xe */
......@@ -242,7 +248,7 @@ static const char *soc_name[] = {
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_SAMA5D3] = "sama5d3",
[AT91_SOC_NONE] = "Unknown"
[AT91_SOC_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_type(struct at91_socinfo *c)
......@@ -268,7 +274,8 @@ static const char *soc_subtype_name[] = {
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
[AT91_SOC_SUBTYPE_NONE] = "Unknown"
[AT91_SOC_SUBTYPE_NONE] = "None",
[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_subtype(struct at91_socinfo *c)
......@@ -282,8 +289,8 @@ void __init at91_map_io(void)
/* Map peripherals */
iotable_init(&at91_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_NONE;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_soc_initdata.type = AT91_SOC_UNKNOWN;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
......@@ -294,8 +301,9 @@ void __init at91_map_io(void)
pr_info("AT91: Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
pr_info("AT91: Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
pr_info("AT91: Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
if (!at91_soc_is_enabled())
panic("AT91: Soc not enabled");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment