Commit 13b81559 authored by Luis R. Rodriguez's avatar Luis R. Rodriguez Committed by John W. Linville

atheros: define shared bssidmask setting

Also make ath5k and ath9k use it, and share register definitions.
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent e5aa8474
......@@ -3,4 +3,7 @@ obj-$(CONFIG_ATH9K) += ath9k/
obj-$(CONFIG_AR9170_USB) += ar9170/
obj-$(CONFIG_ATH_COMMON) += ath.o
ath-objs := main.o regd.o
ath-objs := main.o \
regd.o \
hw.o
......@@ -45,6 +45,7 @@ struct ath_ops {
};
struct ath_common {
void *ah;
u16 cachelsz;
u16 curaid;
u8 macaddr[ETH_ALEN];
......@@ -58,4 +59,6 @@ struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
u32 len,
gfp_t gfp_mask);
void ath_hw_setbssidmask(struct ath_common *common);
#endif /* ATH_H */
......@@ -1192,7 +1192,7 @@ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
/* BSSID Functions */
extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
extern void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
/* Receive start/stop functions */
extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
......
......@@ -104,7 +104,7 @@ static int ath5k_hw_post(struct ath5k_hw *ah)
int ath5k_hw_attach(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
struct ath_common *common;
struct ath_common *common = ath5k_hw_common(ah);
struct pci_dev *pdev = sc->pdev;
struct ath5k_eeprom_info *ee;
int ret;
......
......@@ -593,6 +593,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
sc->ah->ah_iobase = sc->iobase;
common = ath5k_hw_common(sc->ah);
common->ops = &ath5k_common_ops;
common->ah = sc->ah;
common->cachelsz = csz << 2; /* convert to bytes */
/* Initialize device */
......
......@@ -560,8 +560,8 @@ static const struct ath5k_ini ar5212_ini_common_start[] = {
{ AR5K_SLEEP0, 0x0002aaaa },
{ AR5K_SLEEP1, 0x02005555 },
{ AR5K_SLEEP2, 0x00000000 },
{ AR5K_BSS_IDM0, 0xffffffff },
{ AR5K_BSS_IDM1, 0x0000ffff },
{ AR_BSSMSKL, 0xffffffff },
{ AR_BSSMSKU, 0x0000ffff },
{ AR5K_TXPC, 0x00000000 },
{ AR5K_PROFCNT_TX, 0x00000000 },
{ AR5K_PROFCNT_RX, 0x00000000 },
......
......@@ -290,10 +290,10 @@ void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
*/
if (ah->ah_version == AR5K_AR5212) {
ath5k_hw_reg_write(ah, get_unaligned_le32(common->bssidmask),
AR5K_BSS_IDM0);
AR_BSSMSKL);
ath5k_hw_reg_write(ah,
get_unaligned_le16(common->curbssid + 4),
AR5K_BSS_IDM1);
AR_BSSMSKU);
}
/*
......@@ -301,9 +301,9 @@ void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
*/
low_id = get_unaligned_le32(bssid);
high_id = get_unaligned_le16(bssid);
ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
ath5k_hw_reg_write(ah, low_id, AR_BSSMSKL);
ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
AR5K_BSS_ID1_AID_S), AR_BSSMSKU);
if (assoc_id == 0) {
ath5k_hw_disable_pspoll(ah);
......@@ -316,125 +316,18 @@ void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
ath5k_hw_enable_pspoll(ah, NULL, 0);
}
/**
* ath5k_hw_set_bssid_mask - filter out bssids we listen
*
* @ah: the &struct ath5k_hw
* @mask: the bssid_mask, a u8 array of size ETH_ALEN
*
* BSSID masking is a method used by AR5212 and newer hardware to inform PCU
* which bits of the interface's MAC address should be looked at when trying
* to decide which packets to ACK. In station mode and AP mode with a single
* BSS every bit matters since we lock to only one BSS. In AP mode with
* multiple BSSes (virtual interfaces) not every bit matters because hw must
* accept frames for all BSSes and so we tweak some bits of our mac address
* in order to have multiple BSSes.
*
* NOTE: This is a simple filter and does *not* filter out all
* relevant frames. Some frames that are not for us might get ACKed from us
* by PCU because they just match the mask.
*
* When handling multiple BSSes you can get the BSSID mask by computing the
* set of ~ ( MAC XOR BSSID ) for all bssids we handle.
*
* When you do this you are essentially computing the common bits of all your
* BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
* the MAC address to obtain the relevant bits and compare the result with
* (frame's BSSID & mask) to see if they match.
*/
/*
* Simple example: on your card you have have two BSSes you have created with
* BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
* There is another BSSID-03 but you are not part of it. For simplicity's sake,
* assuming only 4 bits for a mac address and for BSSIDs you can then have:
*
* \
* MAC: 0001 |
* BSSID-01: 0100 | --> Belongs to us
* BSSID-02: 1001 |
* /
* -------------------
* BSSID-03: 0110 | --> External
* -------------------
*
* Our bssid_mask would then be:
*
* On loop iteration for BSSID-01:
* ~(0001 ^ 0100) -> ~(0101)
* -> 1010
* bssid_mask = 1010
*
* On loop iteration for BSSID-02:
* bssid_mask &= ~(0001 ^ 1001)
* bssid_mask = (1010) & ~(0001 ^ 1001)
* bssid_mask = (1010) & ~(1001)
* bssid_mask = (1010) & (0110)
* bssid_mask = 0010
*
* A bssid_mask of 0010 means "only pay attention to the second least
* significant bit". This is because its the only bit common
* amongst the MAC and all BSSIDs we support. To findout what the real
* common bit is we can simply "&" the bssid_mask now with any BSSID we have
* or our MAC address (we assume the hardware uses the MAC address).
*
* Now, suppose there's an incoming frame for BSSID-03:
*
* IFRAME-01: 0110
*
* An easy eye-inspeciton of this already should tell you that this frame
* will not pass our check. This is beacuse the bssid_mask tells the
* hardware to only look at the second least significant bit and the
* common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
* as 1, which does not match 0.
*
* So with IFRAME-01 we *assume* the hardware will do:
*
* allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
* --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
* --> allow = (0010) == 0000 ? 1 : 0;
* --> allow = 0
*
* Lets now test a frame that should work:
*
* IFRAME-02: 0001 (we should allow)
*
* allow = (0001 & 1010) == 1010
*
* allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
* --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
* --> allow = (0010) == (0010)
* --> allow = 1
*
* Other examples:
*
* IFRAME-03: 0100 --> allowed
* IFRAME-04: 1001 --> allowed
* IFRAME-05: 1101 --> allowed but its not for us!!!
*
*/
int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
{
struct ath_common *common = ath5k_hw_common(ah);
u32 low_id, high_id;
ATH5K_TRACE(ah->ah_sc);
/* Cache bssid mask so that we can restore it
* on reset */
memcpy(common->bssidmask, mask, ETH_ALEN);
if (ah->ah_version == AR5K_AR5212) {
low_id = get_unaligned_le32(mask);
high_id = get_unaligned_le16(mask + 4);
ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
return 0;
}
return -EIO;
if (ah->ah_version == AR5K_AR5212)
ath_hw_setbssidmask(common);
}
/************\
* RX Control *
\************/
......
......@@ -35,7 +35,7 @@
* released by Atheros and on various debug messages found on the net.
*/
#include "../reg.h"
/*====MAC DMA REGISTERS====*/
......@@ -1649,12 +1649,6 @@
#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */
#define AR5K_SLEEP2_DTIM_PER_S 16
/*
* BSSID mask registers
*/
#define AR5K_BSS_IDM0 0x80e0 /* Upper bits */
#define AR5K_BSS_IDM1 0x80e4 /* Lower bits */
/*
* TX power control (TPC) register
*
......
......@@ -2441,7 +2441,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
| ah->sta_id1_defaults);
ath9k_hw_set_operating_mode(ah, ah->opmode);
ath9k_hw_setbssidmask(ah);
ath_hw_setbssidmask(common);
REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna);
......@@ -3990,14 +3990,6 @@ void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1)
REG_WRITE(ah, AR_MCAST_FIL1, filter1);
}
void ath9k_hw_setbssidmask(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(common->bssidmask));
REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(common->bssidmask + 4));
}
void ath9k_hw_write_associd(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
......
......@@ -1570,6 +1570,7 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid)
common = ath9k_hw_common(ah);
common->ops = &ath9k_common_ops;
common->ah = ah;
/*
* Cache line size is used to size and align various
......
......@@ -282,7 +282,7 @@ static void ath_opmode_init(struct ath_softc *sc)
/* configure bssid mask */
if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
ath9k_hw_setbssidmask(ah);
ath_hw_setbssidmask(common);
/* configure operational mode */
ath9k_hw_setopmode(ah);
......
......@@ -17,6 +17,8 @@
#ifndef REG_H
#define REG_H
#include "../reg.h"
#define AR_CR 0x0008
#define AR_CR_RXE 0x00000004
#define AR_CR_RXD 0x00000020
......@@ -1421,9 +1423,6 @@ enum {
#define AR_SLEEP2_BEACON_TIMEOUT 0xFFE00000
#define AR_SLEEP2_BEACON_TIMEOUT_S 21
#define AR_BSSMSKL 0x80e0
#define AR_BSSMSKU 0x80e4
#define AR_TPC 0x80e8
#define AR_TPC_ACK 0x0000003f
#define AR_TPC_ACK_S 0x00
......
......@@ -94,7 +94,7 @@ void ath9k_set_bssid_mask(struct ieee80211_hw *hw)
common->bssidmask[4] = ~mask[4];
common->bssidmask[5] = ~mask[5];
ath9k_hw_setbssidmask(sc->sc_ah);
ath_hw_setbssidmask(common);
}
int ath9k_wiphy_add(struct ath_softc *sc)
......
/*
* Copyright (c) 2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <asm/unaligned.h>
#include "ath.h"
#include "reg.h"
#define REG_READ common->ops->read
#define REG_WRITE common->ops->write
/**
* ath_hw_set_bssid_mask - filter out bssids we listen
*
* @common: the ath_common struct for the device.
*
* BSSID masking is a method used by AR5212 and newer hardware to inform PCU
* which bits of the interface's MAC address should be looked at when trying
* to decide which packets to ACK. In station mode and AP mode with a single
* BSS every bit matters since we lock to only one BSS. In AP mode with
* multiple BSSes (virtual interfaces) not every bit matters because hw must
* accept frames for all BSSes and so we tweak some bits of our mac address
* in order to have multiple BSSes.
*
* NOTE: This is a simple filter and does *not* filter out all
* relevant frames. Some frames that are not for us might get ACKed from us
* by PCU because they just match the mask.
*
* When handling multiple BSSes you can get the BSSID mask by computing the
* set of ~ ( MAC XOR BSSID ) for all bssids we handle.
*
* When you do this you are essentially computing the common bits of all your
* BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
* the MAC address to obtain the relevant bits and compare the result with
* (frame's BSSID & mask) to see if they match.
*
* Simple example: on your card you have have two BSSes you have created with
* BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
* There is another BSSID-03 but you are not part of it. For simplicity's sake,
* assuming only 4 bits for a mac address and for BSSIDs you can then have:
*
* \
* MAC: 0001 |
* BSSID-01: 0100 | --> Belongs to us
* BSSID-02: 1001 |
* /
* -------------------
* BSSID-03: 0110 | --> External
* -------------------
*
* Our bssid_mask would then be:
*
* On loop iteration for BSSID-01:
* ~(0001 ^ 0100) -> ~(0101)
* -> 1010
* bssid_mask = 1010
*
* On loop iteration for BSSID-02:
* bssid_mask &= ~(0001 ^ 1001)
* bssid_mask = (1010) & ~(0001 ^ 1001)
* bssid_mask = (1010) & ~(1001)
* bssid_mask = (1010) & (0110)
* bssid_mask = 0010
*
* A bssid_mask of 0010 means "only pay attention to the second least
* significant bit". This is because its the only bit common
* amongst the MAC and all BSSIDs we support. To findout what the real
* common bit is we can simply "&" the bssid_mask now with any BSSID we have
* or our MAC address (we assume the hardware uses the MAC address).
*
* Now, suppose there's an incoming frame for BSSID-03:
*
* IFRAME-01: 0110
*
* An easy eye-inspeciton of this already should tell you that this frame
* will not pass our check. This is beacuse the bssid_mask tells the
* hardware to only look at the second least significant bit and the
* common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
* as 1, which does not match 0.
*
* So with IFRAME-01 we *assume* the hardware will do:
*
* allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
* --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
* --> allow = (0010) == 0000 ? 1 : 0;
* --> allow = 0
*
* Lets now test a frame that should work:
*
* IFRAME-02: 0001 (we should allow)
*
* allow = (0001 & 1010) == 1010
*
* allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
* --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
* --> allow = (0010) == (0010)
* --> allow = 1
*
* Other examples:
*
* IFRAME-03: 0100 --> allowed
* IFRAME-04: 1001 --> allowed
* IFRAME-05: 1101 --> allowed but its not for us!!!
*
*/
void ath_hw_setbssidmask(struct ath_common *common)
{
void *ah = common->ah;
REG_WRITE(ah, get_unaligned_le32(common->bssidmask), AR_BSSMSKL);
REG_WRITE(ah, get_unaligned_le16(common->bssidmask + 4), AR_BSSMSKU);
}
EXPORT_SYMBOL(ath_hw_setbssidmask);
/*
* Copyright (c) 2008-2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef ATH_REGISTERS_H
#define ATH_REGISTERS_H
/*
* BSSID mask registers. See ath_hw_set_bssid_mask()
* for detailed documentation about these registers.
*/
#define AR_BSSMSKL 0x80e0
#define AR_BSSMSKU 0x80e4
#endif /* ATH_REGISTERS_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment