iwl3945: fix internal scan

Port of internal scan to iwl3945 missed introduction
of iwl3945_get_single_channel_for_scan.

Fix the following bug by introducing the iwl3945_get_single_channel_for_scan
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2208Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>

drivers/net/wireless/iwlwifi/iwl-agn-lib.c

@@ -1119,10 +1119,9 @@ static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
 					   struct iwl_scan_channel *scan_ch)
 {
 	const struct ieee80211_supported_band *sband;
-	const struct iwl_channel_info *ch_info;
 	u16 passive_dwell = 0;
 	u16 active_dwell = 0;
-	int i, added = 0;
+	int added = 0;
 	u16 channel = 0;
 
 	sband = iwl_get_hw_mode(priv, band);
@@ -1137,32 +1136,7 @@ static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
 	if (passive_dwell <= active_dwell)
 		passive_dwell = active_dwell + 1;
 
-	/* only scan single channel, good enough to reset the RF */
-	/* pick the first valid not in-use channel */
-	if (band == IEEE80211_BAND_5GHZ) {
-		for (i = 14; i < priv->channel_count; i++) {
-			if (priv->channel_info[i].channel !=
-			    le16_to_cpu(priv->staging_rxon.channel)) {
-				channel = priv->channel_info[i].channel;
-				ch_info = iwl_get_channel_info(priv,
-					band, channel);
-				if (is_channel_valid(ch_info))
-					break;
-			}
-		}
-	} else {
-		for (i = 0; i < 14; i++) {
-			if (priv->channel_info[i].channel !=
-			    le16_to_cpu(priv->staging_rxon.channel)) {
-					channel =
-						priv->channel_info[i].channel;
-					ch_info = iwl_get_channel_info(priv,
-						band, channel);
-					if (is_channel_valid(ch_info))
-						break;
-			}
-		}
-	}
+	channel = iwl_get_single_channel_number(priv, band);
 	if (channel) {
 		scan_ch->channel = cpu_to_le16(channel);
 		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;

drivers/net/wireless/iwlwifi/iwl-core.c

@@ -854,6 +854,45 @@ void iwl_set_rxon_chain(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_set_rxon_chain);
 
+/* Return valid channel */
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+				  enum ieee80211_band band)
+{
+	const struct iwl_channel_info *ch_info;
+	int i;
+	u8 channel = 0;
+
+	/* only scan single channel, good enough to reset the RF */
+	/* pick the first valid not in-use channel */
+	if (band == IEEE80211_BAND_5GHZ) {
+		for (i = 14; i < priv->channel_count; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+				channel = priv->channel_info[i].channel;
+				ch_info = iwl_get_channel_info(priv,
+					band, channel);
+				if (is_channel_valid(ch_info))
+					break;
+			}
+		}
+	} else {
+		for (i = 0; i < 14; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+					channel =
+						priv->channel_info[i].channel;
+					ch_info = iwl_get_channel_info(priv,
+						band, channel);
+					if (is_channel_valid(ch_info))
+						break;
+			}
+		}
+	}
+
+	return channel;
+}
+EXPORT_SYMBOL(iwl_get_single_channel_number);
+
 /**
  * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
  * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -343,6 +343,8 @@ int iwl_check_rxon_cmd(struct iwl_priv *priv);
 int iwl_full_rxon_required(struct iwl_priv *priv);
 void iwl_set_rxon_chain(struct iwl_priv *priv);
 int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+				  enum ieee80211_band band);
 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
 u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_sta_ht_cap *sta_ht_inf);

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -1844,6 +1844,49 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 #endif
 }
 
+static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
+					       struct ieee80211_vif *vif,
+					       enum ieee80211_band band,
+					       struct iwl3945_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added = 0;
+	u8 channel = 0;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return added;
+	}
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+
+	channel = iwl_get_single_channel_number(priv, band);
+
+	if (channel) {
+		scan_ch->channel = channel;
+		scan_ch->type = 0;	/* passive */
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* Set txpower levels to defaults */
+		scan_ch->tpc.dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+		added++;
+	} else
+		IWL_ERR(priv, "no valid channel found\n");
+	return added;
+}
+
 static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
 					 enum ieee80211_band band,
 				     u8 is_active, u8 n_probes,
@@ -2992,9 +3035,16 @@ void iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	/* select Rx antennas */
 	scan->flags |= iwl3945_get_antenna_flags(priv);
 
-	scan->channel_count =
-		iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
-			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+	if (priv->is_internal_short_scan) {
+		scan->channel_count =
+			iwl3945_get_single_channel_for_scan(priv, vif, band,
+				(void *)&scan->data[le16_to_cpu(
+				scan->tx_cmd.len)]);
+	} else {
+		scan->channel_count =
+			iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
+				(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+	}
 
 	if (scan->channel_count == 0) {
 		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);