Commit 145f48c5 authored by Peter Chen's avatar Peter Chen Committed by Felipe Balbi

usb: misc: usbtest: add bulk queue test

The bulk queue tests are used to show 'best performance' for bulk
transfer, we are often asked this question by users. The implementation
is the same with iso test, that is queue request at interrupt completion,
so we reuse the iso structures, and rename them as common one.

It's result should be very close to IC simulation, in order
to get that, the device side should also need to prepare enough
queue.

We have got the 'best performance' (IN: 41MB, OUT: 39MB) at i.mx platform
(USB2, ARM Cortex A9, stream mode need to enable) with below command:

Host side:
modprobe usbtest
./testusb -a -t 27 -g 64 -s 16384
./testusb -a -t 28 -g 64 -s 16384
Gadget side:
modprobe g_zero loopdefault=1 qlen=64 buflen=16384
Signed-off-by: default avatarPeter Chen <peter.chen@freescale.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 44e4a60d
......@@ -17,6 +17,7 @@
static int override_alt = -1;
module_param_named(alt, override_alt, int, 0644);
MODULE_PARM_DESC(alt, ">= 0 to override altsetting selection");
static void complicated_callback(struct urb *urb);
/*-------------------------------------------------------------------------*/
......@@ -239,7 +240,8 @@ static struct urb *usbtest_alloc_urb(
unsigned long bytes,
unsigned transfer_flags,
unsigned offset,
u8 bInterval)
u8 bInterval,
usb_complete_t complete_fn)
{
struct urb *urb;
......@@ -248,10 +250,10 @@ static struct urb *usbtest_alloc_urb(
return urb;
if (bInterval)
usb_fill_int_urb(urb, udev, pipe, NULL, bytes, simple_callback,
usb_fill_int_urb(urb, udev, pipe, NULL, bytes, complete_fn,
NULL, bInterval);
else
usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, simple_callback,
usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, complete_fn,
NULL);
urb->interval = (udev->speed == USB_SPEED_HIGH)
......@@ -296,7 +298,17 @@ static struct urb *simple_alloc_urb(
u8 bInterval)
{
return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0,
bInterval);
bInterval, simple_callback);
}
static struct urb *complicated_alloc_urb(
struct usb_device *udev,
int pipe,
unsigned long bytes,
u8 bInterval)
{
return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0,
bInterval, complicated_callback);
}
static unsigned pattern;
......@@ -1795,12 +1807,12 @@ static int ctrl_out(struct usbtest_dev *dev,
/*-------------------------------------------------------------------------*/
/* ISO tests ... mimics common usage
/* ISO/BULK tests ... mimics common usage
* - buffer length is split into N packets (mostly maxpacket sized)
* - multi-buffers according to sglen
*/
struct iso_context {
struct transfer_context {
unsigned count;
unsigned pending;
spinlock_t lock;
......@@ -1809,11 +1821,12 @@ struct iso_context {
unsigned long errors;
unsigned long packet_count;
struct usbtest_dev *dev;
bool is_iso;
};
static void iso_callback(struct urb *urb)
static void complicated_callback(struct urb *urb)
{
struct iso_context *ctx = urb->context;
struct transfer_context *ctx = urb->context;
spin_lock(&ctx->lock);
ctx->count--;
......@@ -1822,7 +1835,7 @@ static void iso_callback(struct urb *urb)
if (urb->error_count > 0)
ctx->errors += urb->error_count;
else if (urb->status != 0)
ctx->errors += urb->number_of_packets;
ctx->errors += (ctx->is_iso ? urb->number_of_packets : 1);
else if (urb->actual_length != urb->transfer_buffer_length)
ctx->errors++;
else if (check_guard_bytes(ctx->dev, urb) != 0)
......@@ -1909,7 +1922,7 @@ static struct urb *iso_alloc_urb(
urb->iso_frame_desc[i].offset = maxp * i;
}
urb->complete = iso_callback;
urb->complete = complicated_callback;
/* urb->context = SET BY CALLER */
urb->interval = 1 << (desc->bInterval - 1);
urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
......@@ -1917,10 +1930,10 @@ static struct urb *iso_alloc_urb(
}
static int
test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
test_queue(struct usbtest_dev *dev, struct usbtest_param *param,
int pipe, struct usb_endpoint_descriptor *desc, unsigned offset)
{
struct iso_context context;
struct transfer_context context;
struct usb_device *udev;
unsigned i;
unsigned long packets = 0;
......@@ -1930,20 +1943,20 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
memset(&context, 0, sizeof(context));
context.count = param->iterations * param->sglen;
context.dev = dev;
context.is_iso = !!desc;
init_completion(&context.done);
spin_lock_init(&context.lock);
udev = testdev_to_usbdev(dev);
dev_info(&dev->intf->dev,
"iso period %d %sframes, wMaxPacket %d, transactions: %d\n",
1 << (desc->bInterval - 1),
(udev->speed == USB_SPEED_HIGH) ? "micro" : "",
usb_endpoint_maxp(desc) & 0x7ff,
1 + (0x3 & (usb_endpoint_maxp(desc) >> 11)));
for (i = 0; i < param->sglen; i++) {
urbs[i] = iso_alloc_urb(udev, pipe, desc,
if (context.is_iso)
urbs[i] = iso_alloc_urb(udev, pipe, desc,
param->length, offset);
else
urbs[i] = complicated_alloc_urb(udev, pipe,
param->length, 0);
if (!urbs[i]) {
status = -ENOMEM;
goto fail;
......@@ -1952,11 +1965,21 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
urbs[i]->context = &context;
}
packets *= param->iterations;
dev_info(&dev->intf->dev,
"total %lu msec (%lu packets)\n",
(packets * (1 << (desc->bInterval - 1)))
/ ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
packets);
if (context.is_iso) {
dev_info(&dev->intf->dev,
"iso period %d %sframes, wMaxPacket %d, transactions: %d\n",
1 << (desc->bInterval - 1),
(udev->speed == USB_SPEED_HIGH) ? "micro" : "",
usb_endpoint_maxp(desc) & 0x7ff,
1 + (0x3 & (usb_endpoint_maxp(desc) >> 11)));
dev_info(&dev->intf->dev,
"total %lu msec (%lu packets)\n",
(packets * (1 << (desc->bInterval - 1)))
/ ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
packets);
}
spin_lock_irq(&context.lock);
for (i = 0; i < param->sglen; i++) {
......@@ -1993,7 +2016,8 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
;
else if (context.submit_error)
status = -EACCES;
else if (context.errors > context.packet_count / 10)
else if (context.errors >
(context.is_iso ? context.packet_count / 10 : 0))
status = -EIO;
return status;
......@@ -2014,8 +2038,8 @@ static int test_unaligned_bulk(
const char *label)
{
int retval;
struct urb *urb = usbtest_alloc_urb(
testdev_to_usbdev(tdev), pipe, length, transfer_flags, 1, 0);
struct urb *urb = usbtest_alloc_urb(testdev_to_usbdev(tdev),
pipe, length, transfer_flags, 1, 0, simple_callback);
if (!urb)
return -ENOMEM;
......@@ -2342,7 +2366,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
param->iterations,
param->sglen, param->length);
/* FIRMWARE: iso sink */
retval = test_iso_queue(dev, param,
retval = test_queue(dev, param,
dev->out_iso_pipe, dev->iso_out, 0);
break;
......@@ -2355,7 +2379,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
param->iterations,
param->sglen, param->length);
/* FIRMWARE: iso source */
retval = test_iso_queue(dev, param,
retval = test_queue(dev, param,
dev->in_iso_pipe, dev->iso_in, 0);
break;
......@@ -2436,7 +2460,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
"TEST 22: write %d iso odd, %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
retval = test_iso_queue(dev, param,
retval = test_queue(dev, param,
dev->out_iso_pipe, dev->iso_out, 1);
break;
......@@ -2447,7 +2471,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
"TEST 23: read %d iso odd, %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
retval = test_iso_queue(dev, param,
retval = test_queue(dev, param,
dev->in_iso_pipe, dev->iso_in, 1);
break;
......@@ -2504,6 +2528,25 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
retval = simple_io(dev, urb, param->iterations, 0, 0, "test26");
simple_free_urb(urb);
break;
case 27:
/* We do performance test, so ignore data compare */
if (dev->out_pipe == 0 || param->sglen == 0 || pattern != 0)
break;
dev_info(&intf->dev,
"TEST 27: bulk write %dMbytes\n", (param->iterations *
param->sglen * param->length) / (1024 * 1024));
retval = test_queue(dev, param,
dev->out_pipe, NULL, 0);
break;
case 28:
if (dev->in_pipe == 0 || param->sglen == 0 || pattern != 0)
break;
dev_info(&intf->dev,
"TEST 28: bulk read %dMbytes\n", (param->iterations *
param->sglen * param->length) / (1024 * 1024));
retval = test_queue(dev, param,
dev->in_pipe, NULL, 0);
break;
}
do_gettimeofday(&param->duration);
param->duration.tv_sec -= start.tv_sec;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment