Skip to content

L
linux
Commit 14658038 authored by Jody McIntyre's avatar Jody McIntyre
Browse files
Options

Christoph Hellwig: avoid obsolete scsi APIs in sbp2 

Signed-off-by: default avatarJody McIntyre <scjody@modernduck.com>
parent 36c954a0
Hide whitespace changes
Inline Side-by-side
Showing with 45 additions and 40 deletions
drivers/ieee1394/sbp2.c
View file @ 14658038
......@@ -64,7 +64,10 @@
#include <asm/system.h>
#include <asm/scatterlist.h>
#include "../scsi/scsi.h"
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include "csr1212.h"
......@@ -224,10 +227,10 @@ static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id
u32 status);
static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
u32 scsi_status, Scsi_Cmnd *SCpnt,
void (*done)(Scsi_Cmnd *));
u32 scsi_status, struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *));
static Scsi_Host_Template scsi_driver_template;
static struct scsi_host_template scsi_driver_template;
const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC };
......@@ -520,8 +523,8 @@ static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_
*/
static struct sbp2_command_info *sbp2util_allocate_command_orb(
struct scsi_id_instance_data *scsi_id,
Scsi_Cmnd *Current_SCpnt,
void (*Current_done)(Scsi_Cmnd *))
struct scsi_cmnd *Current_SCpnt,
void (*Current_done)(struct scsi_cmnd *))
{
struct list_head *lh;
struct sbp2_command_info *command = NULL;
......@@ -1700,14 +1703,14 @@ static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
unsigned int scsi_use_sg,
unsigned int scsi_request_bufflen,
void *scsi_request_buffer,
unsigned char scsi_dir)
enum dma_data_direction dma_dir)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
struct scatterlist *sgpnt = (struct scatterlist *) scsi_request_buffer;
struct sbp2_command_orb *command_orb = &command->command_orb;
struct sbp2_unrestricted_page_table *scatter_gather_element =
&command->scatter_gather_element[0];
int dma_dir = scsi_to_pci_dma_dir (scsi_dir);
u32 sg_count, sg_len, orb_direction;
dma_addr_t sg_addr;
int i;
......@@ -1730,22 +1733,22 @@ static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
* Get the direction of the transfer. If the direction is unknown, then use our
* goofy table as a back-up.
*/
switch (scsi_dir) {
case SCSI_DATA_NONE:
switch (dma_dir) {
case DMA_NONE:
orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
break;
case SCSI_DATA_WRITE:
case DMA_TO_DEVICE:
orb_direction = ORB_DIRECTION_WRITE_TO_MEDIA;
break;
case SCSI_DATA_READ:
case DMA_FROM_DEVICE:
orb_direction = ORB_DIRECTION_READ_FROM_MEDIA;
break;
case SCSI_DATA_UNKNOWN:
case DMA_BIDIRECTIONAL:
default:
SBP2_ERR("SCSI data transfer direction not specified. "
"Update the SBP2 direction table in sbp2.h if "
"necessary for your application");
print_command (scsi_cmd);
__scsi_print_command(scsi_cmd);
orb_direction = sbp2scsi_direction_table[*scsi_cmd];
break;
}
......@@ -2031,7 +2034,8 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
* This function is called in order to begin a regular SBP-2 command.
*/
static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
unchar *cmd = (unchar *) SCpnt->cmnd;
unsigned int request_bufflen = SCpnt->request_bufflen;
......@@ -2040,7 +2044,7 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
SBP2_DEBUG("sbp2_send_command");
#if (CONFIG_IEEE1394_SBP2_DEBUG >= 2) || defined(CONFIG_IEEE1394_SBP2_PACKET_DUMP)
printk("[scsi command]\n ");
print_command (cmd);
scsi_print_command(SCpnt);
#endif
SBP2_DEBUG("SCSI transfer size = %x", request_bufflen);
SBP2_DEBUG("SCSI s/g elements = %x", (unsigned int)SCpnt->use_sg);
......@@ -2233,7 +2237,7 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense
* response data translations for the SCSI stack
*/
static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
Scsi_Cmnd *SCpnt)
struct scsi_cmnd *SCpnt)
{
u8 *scsi_buf = SCpnt->request_buffer;
u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun);
......@@ -2312,7 +2316,7 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
struct sbp2scsi_host_info *hi;
struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
u32 id;
Scsi_Cmnd *SCpnt = NULL;
struct scsi_cmnd *SCpnt = NULL;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
struct sbp2_command_info *command;
......@@ -2454,7 +2458,8 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
* This routine is the main request entry routine for doing I/O. It is
* called from the scsi stack directly.
*/
static int sbp2scsi_queuecommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
struct scsi_id_instance_data *scsi_id =
(struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0];
......@@ -2550,9 +2555,8 @@ static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id
PCI_DMA_BIDIRECTIONAL);
sbp2util_mark_command_completed(scsi_id, command);
if (command->Current_SCpnt) {
void (*done)(Scsi_Cmnd *) = command->Current_done;
command->Current_SCpnt->result = status << 16;
done (command->Current_SCpnt);
command->Current_done(command->Current_SCpnt);
}
}
......@@ -2565,8 +2569,8 @@ static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id
* This can be called in interrupt context.
*/
static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
u32 scsi_status, Scsi_Cmnd *SCpnt,
void (*done)(Scsi_Cmnd *))
u32 scsi_status, struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
unsigned long flags;
......@@ -2611,8 +2615,8 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
* Debug stuff
*/
#if CONFIG_IEEE1394_SBP2_DEBUG >= 1
print_command (SCpnt->cmnd);
print_sense("bh", SCpnt);
scsi_print_command(SCpnt);
scsi_print_sense("bh", SCpnt);
#endif
break;
......@@ -2620,7 +2624,7 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
case SBP2_SCSI_STATUS_SELECTION_TIMEOUT:
SBP2_ERR("SBP2_SCSI_STATUS_SELECTION_TIMEOUT");
SCpnt->result = DID_NO_CONNECT << 16;
print_command (SCpnt->cmnd);
scsi_print_command(SCpnt);
break;
case SBP2_SCSI_STATUS_CONDITION_MET:
......@@ -2628,7 +2632,7 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
case SBP2_SCSI_STATUS_COMMAND_TERMINATED:
SBP2_ERR("Bad SCSI status = %x", scsi_status);
SCpnt->result = DID_ERROR << 16;
print_command (SCpnt->cmnd);
scsi_print_command(SCpnt);
break;
default:
......@@ -2688,7 +2692,7 @@ static int sbp2scsi_slave_configure (struct scsi_device *sdev)
* Called by scsi stack when something has really gone wrong. Usually
* called when a command has timed-out for some reason.
*/
static int sbp2scsi_abort (Scsi_Cmnd *SCpnt)
static int sbp2scsi_abort(struct scsi_cmnd *SCpnt)
{
struct scsi_id_instance_data *scsi_id =
(struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0];
......@@ -2696,7 +2700,7 @@ static int sbp2scsi_abort (Scsi_Cmnd *SCpnt)
struct sbp2_command_info *command;
SBP2_ERR("aborting sbp2 command");
print_command (SCpnt->cmnd);
scsi_print_command(SCpnt);
if (scsi_id) {
......@@ -2717,9 +2721,8 @@ static int sbp2scsi_abort (Scsi_Cmnd *SCpnt)
PCI_DMA_BIDIRECTIONAL);
sbp2util_mark_command_completed(scsi_id, command);
if (command->Current_SCpnt) {
void (*done)(Scsi_Cmnd *) = command->Current_done;
command->Current_SCpnt->result = DID_ABORT << 16;
done (command->Current_SCpnt);
command->Current_done(command->Current_SCpnt);
}
}
......@@ -2736,7 +2739,7 @@ static int sbp2scsi_abort (Scsi_Cmnd *SCpnt)
/*
* Called by scsi stack when something has really gone wrong.
*/
static int sbp2scsi_reset (Scsi_Cmnd *SCpnt)
static int sbp2scsi_reset(struct scsi_cmnd *SCpnt)
{
struct scsi_id_instance_data *scsi_id =
(struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0];
......@@ -2789,7 +2792,7 @@ MODULE_SUPPORTED_DEVICE(SBP2_DEVICE_NAME);
MODULE_LICENSE("GPL");
/* SCSI host template */
static Scsi_Host_Template scsi_driver_template = {
static struct scsi_host_template scsi_driver_template = {
.module = THIS_MODULE,
.name = "SBP-2 IEEE-1394",
.proc_name = SBP2_DEVICE_NAME,
......
drivers/ieee1394/sbp2.h
View file @ 14658038
......@@ -324,8 +324,8 @@ struct sbp2_command_info {
struct list_head list;
struct sbp2_command_orb command_orb ____cacheline_aligned;
dma_addr_t command_orb_dma ____cacheline_aligned;
Scsi_Cmnd *Current_SCpnt;
void (*Current_done)(Scsi_Cmnd *);
struct scsi_cmnd *Current_SCpnt;
void (*Current_done)(struct scsi_cmnd *);
/* Also need s/g structure for each sbp2 command */
struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned;
......@@ -434,8 +434,8 @@ static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_
static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb);
static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt);
static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id,
Scsi_Cmnd *Current_SCpnt,
void (*Current_done)(Scsi_Cmnd *));
struct scsi_cmnd *Current_SCpnt,
void (*Current_done)(struct scsi_cmnd *));
static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id,
struct sbp2_command_info *command);
......@@ -466,14 +466,16 @@ static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
unsigned int scsi_use_sg,
unsigned int scsi_request_bufflen,
void *scsi_request_buffer,
unsigned char scsi_dir);
enum dma_data_direction dma_dir);
static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
struct sbp2_command_info *command);
static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *));
static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data);
static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd);
static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, Scsi_Cmnd *SCpnt);
static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
struct scsi_cmnd *SCpnt);
static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
struct unit_directory *ud);
static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7