Merge tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A respin of the merges in the previous pull request with one extra
  fix.

  A quiet release for the regulator API, quite a large number of small
  improvements all over but other than the addition of new drivers for
  the AS3722 and MAX14577 there is nothing of substantial non-local
  impact"

* tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (47 commits)
  regulator: pfuze100-regulator: Improve dev_info() message
  regulator: pfuze100-regulator: Fix some checkpatch complaints
  regulator: twl: Fix checkpatch issue
  regulator: core: Fix checkpatch issue
  regulator: anatop-regulator: Remove unneeded memset()
  regulator: s5m8767: Update LDO index in s5m8767-regulator.txt
  regulator: as3722: set enable time for SD0/1/6
  regulator: as3722: detect SD0 low-voltage mode
  regulator: tps62360: Fix up a pointer-integer size mismatch warning
  regulator: anatop-regulator: Remove unneeded kstrdup()
  regulator: act8865: Fix build error when !OF
  regulator: act8865: register all regulators regardless of how many are used
  regulator: wm831x-dcdc: Remove unneeded 'err' label
  regulator: anatop-regulator: Add MODULE_ALIAS()
  regulator: act8865: fix incorrect devm_kzalloc for act8865
  regulator: act8865: Remove set_suspend_[en|dis]able implementation
  regulator: act8865: Remove unneeded regulator_unregister() calls
  regulator: s2mps11: Clean up redundant code
  regulator: tps65910: Simplify setting enable_mask for regulators
  regulator: act8865: add device tree binding doc
  ...

Documentation/devicetree/bindings/mfd/tps65910.txt

@@ -21,7 +21,7 @@ Required properties:
 
   The valid regulator-compatible values are:
   tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
-            vaux2, vaux33, vmmc
+            vaux2, vaux33, vmmc, vbb
   tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
             ldo6, ldo7, ldo8
 
@@ -38,7 +38,7 @@ Required properties:
 	vcc4-supply: VAUX1 and VAUX2 input.
 	vcc5-supply: VPLL and VDAC input.
 	vcc6-supply: VDIG1 and VDIG2 input.
-	vcc7-supply: VRTC input.
+	vcc7-supply: VRTC and VBB input.
 	vccio-supply: VIO input.
   tps65911:
 	vcc1-supply: VDD1 input.

Documentation/devicetree/bindings/regulator/act8865-regulator.txt

+ACT8865 regulator
+-------------------
+
+Required properties:
+- compatible: "active-semi,act8865"
+- reg: I2C slave address
+
+Any standard regulator properties can be used to configure the single regulator.
+
+The valid names for regulators are:
+	DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
+
+Example:
+--------
+
+		i2c1: i2c@f0018000 {
+			pmic: act8865@5b {
+				compatible = "active-semi,act8865";
+				reg = <0x5b>;
+				status = "disabled";
+
+				regulators {
+					vcc_1v8_reg: DCDC_REG1 {
+						regulator-name = "VCC_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+					};
+
+					vcc_1v2_reg: DCDC_REG2 {
+						regulator-name = "VCC_1V2";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-suspend-mem-microvolt = <1150000>;
+						regulator-suspend-standby-microvolt = <1150000>;
+						regulator-always-on;
+					};
+
+					vcc_3v3_reg: DCDC_REG3 {
+						regulator-name = "VCC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					vddana_reg: LDO_REG1 {
+						regulator-name = "VDDANA";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					vddfuse_reg: LDO_REG2 {
+						regulator-name = "FUSE_2V5";
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2500000>;
+					};
+				};
+			};
+		};

Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt

@@ -83,7 +83,7 @@ as per the datasheet of s5m8767.
 
 	- LDOn
 		  - valid values for n are 1 to 28
-		  - Example: LDO0, LD01, LDO28
+		  - Example: LDO1, LD02, LDO28
 	- BUCKn
 		  - valid values for n are 1 to 9.
 		  - Example: BUCK1, BUCK2, BUCK9

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -3,6 +3,7 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
+active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB

drivers/mfd/pcf50633-core.c

@@ -245,7 +245,7 @@ static int pcf50633_probe(struct i2c_client *client,
 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
 		struct platform_device *pdev;
 
-		pdev = platform_device_alloc("pcf50633-regltr", i);
+		pdev = platform_device_alloc("pcf50633-regulator", i);
 		if (!pdev) {
 			dev_err(pcf->dev, "Cannot create regulator %d\n", i);
 			continue;

drivers/mfd/sec-core.c

@@ -81,36 +81,6 @@ static struct of_device_id sec_dt_match[] = {
 };
 #endif
 
-int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest)
-{
-	return regmap_read(sec_pmic->regmap_pmic, reg, dest);
-}
-EXPORT_SYMBOL_GPL(sec_reg_read);
-
-int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf)
-{
-	return regmap_bulk_read(sec_pmic->regmap_pmic, reg, buf, count);
-}
-EXPORT_SYMBOL_GPL(sec_bulk_read);
-
-int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value)
-{
-	return regmap_write(sec_pmic->regmap_pmic, reg, value);
-}
-EXPORT_SYMBOL_GPL(sec_reg_write);
-
-int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf)
-{
-	return regmap_raw_write(sec_pmic->regmap_pmic, reg, buf, count);
-}
-EXPORT_SYMBOL_GPL(sec_bulk_write);
-
-int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask)
-{
-	return regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, val);
-}
-EXPORT_SYMBOL_GPL(sec_reg_update);
-
 static bool s2mps11_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {

drivers/regulator/Kconfig

@@ -70,6 +70,14 @@ config REGULATOR_88PM8607
 	help
 	  This driver supports 88PM8607 voltage regulator chips.
 
+config REGULATOR_ACT8865
+	tristate "Active-semi act8865 voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a active-semi act8865 voltage output
+	  regulator via I2C bus.
+
 config REGULATOR_AD5398
 	tristate "Analog Devices AD5398/AD5821 regulators"
 	depends on I2C
@@ -249,6 +257,13 @@ config REGULATOR_LP8788
 	help
 	  This driver supports LP8788 voltage regulator chip.
 
+config REGULATOR_MAX14577
+	tristate "Maxim 14577 regulator"
+	depends on MFD_MAX14577
+	help
+	  This driver controls a Maxim 14577 regulator via I2C bus.
+	  The regulators include safeout LDO and current regulator 'CHARGER'.
+
 config REGULATOR_MAX1586
 	tristate "Maxim 1586/1587 voltage regulator"
 	depends on I2C
@@ -384,7 +399,7 @@ config REGULATOR_PCF50633
 	 on PCF50633
 
 config REGULATOR_PFUZE100
-	tristate "Support regulators on Freescale PFUZE100 PMIC"
+	tristate "Freescale PFUZE100 regulator driver"
 	depends on I2C
 	select REGMAP_I2C
 	help

drivers/regulator/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500-ext.o ab8500.o
+obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
@@ -35,6 +36,7 @@ obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
+obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o

drivers/regulator/ab8500.c

@@ -2998,37 +2998,6 @@ static void abx500_get_regulator_info(struct ab8500 *ab8500)
 	}
 }
 
-static int ab8500_regulator_init_registers(struct platform_device *pdev,
-					   int id, int mask, int value)
-{
-	struct ab8500_reg_init *reg_init = abx500_regulator.init;
-	int err;
-
-	BUG_ON(value & ~mask);
-	BUG_ON(mask & ~reg_init[id].mask);
-
-	/* initialize register */
-	err = abx500_mask_and_set_register_interruptible(
-		&pdev->dev,
-		reg_init[id].bank,
-		reg_init[id].addr,
-		mask, value);
-	if (err < 0) {
-		dev_err(&pdev->dev,
-			"Failed to initialize 0x%02x, 0x%02x.\n",
-			reg_init[id].bank,
-			reg_init[id].addr);
-		return err;
-	}
-	dev_vdbg(&pdev->dev,
-		 "  init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
-		 reg_init[id].bank,
-		 reg_init[id].addr,
-		 mask, value);
-
-	return 0;
-}
-
 static int ab8500_regulator_register(struct platform_device *pdev,
 				     struct regulator_init_data *init_data,
 				     int id, struct device_node *np)
@@ -3036,7 +3005,6 @@ static int ab8500_regulator_register(struct platform_device *pdev,
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct ab8500_regulator_info *info = NULL;
 	struct regulator_config config = { };
-	int err;
 
 	/* assign per-regulator data */
 	info = &abx500_regulator.info[id];
@@ -3058,17 +3026,12 @@ static int ab8500_regulator_register(struct platform_device *pdev,
 	}
 
 	/* register regulator with framework */
-	info->regulator = regulator_register(&info->desc, &config);
+	info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
+						&config);
 	if (IS_ERR(info->regulator)) {
-		err = PTR_ERR(info->regulator);
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 			info->desc.name);
-		/* when we fail, un-register all earlier regulators */
-		while (--id >= 0) {
-			info = &abx500_regulator.info[id];
-			regulator_unregister(info->regulator);
-		}
-		return err;
+		return PTR_ERR(info->regulator);
 	}
 
 	return 0;
@@ -3095,9 +3058,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *np = pdev->dev.of_node;
-	struct ab8500_platform_data *ppdata;
-	struct ab8500_regulator_platform_data *pdata;
-	int i, err;
+	int err;
 
 	if (!ab8500) {
 		dev_err(&pdev->dev, "null mfd parent\n");
@@ -3106,83 +3067,20 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 
 	abx500_get_regulator_info(ab8500);
 
-	if (np) {
-		err = of_regulator_match(&pdev->dev, np,
-					 abx500_regulator.match,
-					 abx500_regulator.match_size);
-		if (err < 0) {
-			dev_err(&pdev->dev,
-				"Error parsing regulator init data: %d\n", err);
-			return err;
-		}
-
-		err = ab8500_regulator_of_probe(pdev, np);
-		return err;
-	}
-
-	ppdata = dev_get_platdata(ab8500->dev);
-	if (!ppdata) {
-		dev_err(&pdev->dev, "null parent pdata\n");
-		return -EINVAL;
-	}
-
-	pdata = ppdata->regulator;
-	if (!pdata) {
-		dev_err(&pdev->dev, "null pdata\n");
-		return -EINVAL;
-	}
-
-	/* make sure the platform data has the correct size */
-	if (pdata->num_regulator != abx500_regulator.info_size) {
-		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
-		return -EINVAL;
-	}
-
-	/* initialize debug (initial state is recorded with this call) */
-	err = ab8500_regulator_debug_init(pdev);
-	if (err)
+	err = of_regulator_match(&pdev->dev, np,
+				 abx500_regulator.match,
+				 abx500_regulator.match_size);
+	if (err < 0) {
+		dev_err(&pdev->dev,
+			"Error parsing regulator init data: %d\n", err);
 		return err;
-
-	/* initialize registers */
-	for (i = 0; i < pdata->num_reg_init; i++) {
-		int id, mask, value;
-
-		id = pdata->reg_init[i].id;
-		mask = pdata->reg_init[i].mask;
-		value = pdata->reg_init[i].value;
-
-		/* check for configuration errors */
-		BUG_ON(id >= abx500_regulator.init_size);
-
-		err = ab8500_regulator_init_registers(pdev, id, mask, value);
-		if (err < 0)
-			return err;
 	}
-
-	/* register all regulators */
-	for (i = 0; i < abx500_regulator.info_size; i++) {
-		err = ab8500_regulator_register(pdev, &pdata->regulator[i],
-						i, NULL);
-		if (err < 0)
-			return err;
-	}
-
-	return 0;
+	return ab8500_regulator_of_probe(pdev, np);
 }
 
 static int ab8500_regulator_remove(struct platform_device *pdev)
 {
-	int i, err;
-
-	for (i = 0; i < abx500_regulator.info_size; i++) {
-		struct ab8500_regulator_info *info = NULL;
-		info = &abx500_regulator.info[i];
-
-		dev_vdbg(rdev_get_dev(info->regulator),
-			"%s-remove\n", info->desc.name);
-
-		regulator_unregister(info->regulator);
-	}
+	int err;
 
 	/* remove regulator debug */
 	err = ab8500_regulator_debug_exit(pdev);

drivers/regulator/act8865-regulator.c

+/*
+ * act8865-regulator.c - Voltage regulation for the active-semi ACT8865
+ * http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
+ *
+ * Copyright (C) 2013 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/act8865.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+
+/*
+ * ACT8865 Global Register Map.
+ */
+#define	ACT8865_SYS_MODE	0x00
+#define	ACT8865_SYS_CTRL	0x01
+#define	ACT8865_DCDC1_VSET1	0x20
+#define	ACT8865_DCDC1_VSET2	0x21
+#define	ACT8865_DCDC1_CTRL	0x22
+#define	ACT8865_DCDC2_VSET1	0x30
+#define	ACT8865_DCDC2_VSET2	0x31
+#define	ACT8865_DCDC2_CTRL	0x32
+#define	ACT8865_DCDC3_VSET1	0x40
+#define	ACT8865_DCDC3_VSET2	0x41
+#define	ACT8865_DCDC3_CTRL	0x42
+#define	ACT8865_LDO1_VSET	0x50
+#define	ACT8865_LDO1_CTRL	0x51
+#define	ACT8865_LDO2_VSET	0x54
+#define	ACT8865_LDO2_CTRL	0x55
+#define	ACT8865_LDO3_VSET	0x60
+#define	ACT8865_LDO3_CTRL	0x61
+#define	ACT8865_LDO4_VSET	0x64
+#define	ACT8865_LDO4_CTRL	0x65
+
+/*
+ * Field Definitions.
+ */
+#define	ACT8865_ENA		0x80	/* ON - [7] */
+#define	ACT8865_VSEL_MASK	0x3F	/* VSET - [5:0] */
+
+/*
+ * ACT8865 voltage number
+ */
+#define	ACT8865_VOLTAGE_NUM	64
+
+struct act8865 {
+	struct regulator_dev *rdev[ACT8865_REG_NUM];
+	struct regmap *regmap;
+};
+
+static const struct regmap_config act8865_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct regulator_linear_range act8865_volatge_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
+	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
+	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
+};
+
+static struct regulator_ops act8865_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+static const struct regulator_desc act8865_reg[] = {
+	{
+		.name = "DCDC_REG1",
+		.id = ACT8865_ID_DCDC1,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_DCDC1_VSET1,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_DCDC1_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC_REG2",
+		.id = ACT8865_ID_DCDC2,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_DCDC2_VSET1,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_DCDC2_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC_REG3",
+		.id = ACT8865_ID_DCDC3,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_DCDC3_VSET1,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_DCDC3_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG1",
+		.id = ACT8865_ID_LDO1,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_LDO1_VSET,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_LDO1_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG2",
+		.id = ACT8865_ID_LDO2,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_LDO2_VSET,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_LDO2_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG3",
+		.id = ACT8865_ID_LDO3,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_LDO3_VSET,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_LDO3_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG4",
+		.id = ACT8865_ID_LDO4,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_LDO4_VSET,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_LDO4_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id act8865_dt_ids[] = {
+	{ .compatible = "active-semi,act8865" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, act8865_dt_ids);
+
+static struct of_regulator_match act8865_matches[] = {
+	[ACT8865_ID_DCDC1]	= { .name = "DCDC_REG1"},
+	[ACT8865_ID_DCDC2]	= { .name = "DCDC_REG2"},
+	[ACT8865_ID_DCDC3]	= { .name = "DCDC_REG3"},
+	[ACT8865_ID_LDO1]	= { .name = "LDO_REG1"},
+	[ACT8865_ID_LDO2]	= { .name = "LDO_REG2"},
+	[ACT8865_ID_LDO3]	= { .name = "LDO_REG3"},
+	[ACT8865_ID_LDO4]	= { .name = "LDO_REG4"},
+};
+
+static int act8865_pdata_from_dt(struct device *dev,
+				 struct device_node **of_node,
+				 struct act8865_platform_data *pdata)
+{
+	int matched, i;
+	struct device_node *np;
+	struct act8865_regulator_data *regulator;
+
+	np = of_find_node_by_name(dev->of_node, "regulators");
+	if (!np) {
+		dev_err(dev, "missing 'regulators' subnode in DT\n");
+		return -EINVAL;
+	}
+
+	matched = of_regulator_match(dev, np,
+				act8865_matches, ARRAY_SIZE(act8865_matches));
+	if (matched <= 0)
+		return matched;
+
+	pdata->regulators = devm_kzalloc(dev,
+				sizeof(struct act8865_regulator_data) *
+				ARRAY_SIZE(act8865_matches), GFP_KERNEL);
+	if (!pdata->regulators) {
+		dev_err(dev, "%s: failed to allocate act8865 registor\n",
+						__func__);
+		return -ENOMEM;
+	}
+
+	pdata->num_regulators = matched;
+	regulator = pdata->regulators;
+
+	for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
+		regulator->id = i;
+		regulator->name = act8865_matches[i].name;
+		regulator->platform_data = act8865_matches[i].init_data;
+		of_node[i] = act8865_matches[i].of_node;
+		regulator++;
+	}
+
+	return 0;
+}
+#else
+static inline int act8865_pdata_from_dt(struct device *dev,
+					struct device_node **of_node,
+					struct act8865_platform_data *pdata)
+{
+	return 0;
+}
+#endif
+
+static int act8865_pmic_probe(struct i2c_client *client,
+			   const struct i2c_device_id *i2c_id)
+{
+	struct regulator_dev **rdev;
+	struct device *dev = &client->dev;
+	struct act8865_platform_data *pdata = dev_get_platdata(dev);
+	struct regulator_config config = { };
+	struct act8865 *act8865;
+	struct device_node *of_node[ACT8865_REG_NUM];
+	int i, id;
+	int ret = -EINVAL;
+	int error;
+
+	if (dev->of_node && !pdata) {
+		const struct of_device_id *id;
+		struct act8865_platform_data pdata_of;
+
+		id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
+		if (!id)
+			return -ENODEV;
+
+		ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
+		if (ret < 0)
+			return ret;
+
+		pdata = &pdata_of;
+	}
+
+	if (pdata->num_regulators > ACT8865_REG_NUM) {
+		dev_err(dev, "Too many regulators found!\n");
+		return -EINVAL;
+	}
+
+	act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
+	if (!act8865)
+		return -ENOMEM;
+
+	rdev = act8865->rdev;
+
+	act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config);
+	if (IS_ERR(act8865->regmap)) {
+		error = PTR_ERR(act8865->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			error);
+		return error;
+	}
+
+	/* Finally register devices */
+	for (i = 0; i < ACT8865_REG_NUM; i++) {
+
+		id = pdata->regulators[i].id;
+
+		config.dev = dev;
+		config.init_data = pdata->regulators[i].platform_data;
+		config.of_node = of_node[i];
+		config.driver_data = act8865;
+		config.regmap = act8865->regmap;
+
+		rdev[i] = devm_regulator_register(&client->dev,
+						&act8865_reg[i], &config);
+		if (IS_ERR(rdev[i])) {
+			dev_err(dev, "failed to register %s\n",
+				act8865_reg[id].name);
+			return PTR_ERR(rdev[i]);
+		}
+	}
+
+	i2c_set_clientdata(client, act8865);
+
+	return 0;
+}
+
+static const struct i2c_device_id act8865_ids[] = {
+	{ "act8865", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, act8865_ids);
+
+static struct i2c_driver act8865_pmic_driver = {
+	.driver	= {
+		.name	= "act8865",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= act8865_pmic_probe,
+	.id_table	= act8865_ids,
+};
+
+module_i2c_driver(act8865_pmic_driver);
+
+MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL v2");

drivers/regulator/anatop-regulator.c

@@ -122,10 +122,8 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	if (!sreg)
 		return -ENOMEM;
 	sreg->initdata = initdata;
-	sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL),
-			     GFP_KERNEL);
+	sreg->name = of_get_property(np, "regulator-name", NULL);
 	rdesc = &sreg->rdesc;
-	memset(rdesc, 0, sizeof(*rdesc));
 	rdesc->name = sreg->name;
 	rdesc->ops = &anatop_rops;
 	rdesc->type = REGULATOR_VOLTAGE;
@@ -143,37 +141,37 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 				   &sreg->control_reg);
 	if (ret) {
 		dev_err(dev, "no anatop-reg-offset property set\n");
-		goto anatop_probe_end;
+		return ret;
 	}
 	ret = of_property_read_u32(np, "anatop-vol-bit-width",
 				   &sreg->vol_bit_width);
 	if (ret) {
 		dev_err(dev, "no anatop-vol-bit-width property set\n");
-		goto anatop_probe_end;
+		return ret;
 	}
 	ret = of_property_read_u32(np, "anatop-vol-bit-shift",
 				   &sreg->vol_bit_shift);
 	if (ret) {
 		dev_err(dev, "no anatop-vol-bit-shift property set\n");
-		goto anatop_probe_end;
+		return ret;
 	}
 	ret = of_property_read_u32(np, "anatop-min-bit-val",
 				   &sreg->min_bit_val);
 	if (ret) {
 		dev_err(dev, "no anatop-min-bit-val property set\n");
-		goto anatop_probe_end;
+		return ret;
 	}
 	ret = of_property_read_u32(np, "anatop-min-voltage",
 				   &sreg->min_voltage);
 	if (ret) {
 		dev_err(dev, "no anatop-min-voltage property set\n");
-		goto anatop_probe_end;
+		return ret;
 	}
 	ret = of_property_read_u32(np, "anatop-max-voltage",
 				   &sreg->max_voltage);
 	if (ret) {
 		dev_err(dev, "no anatop-max-voltage property set\n");
-		goto anatop_probe_end;
+		return ret;
 	}
 
 	/* read LDO ramp up setting, only for core reg */
@@ -204,27 +202,11 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	if (IS_ERR(rdev)) {
 		dev_err(dev, "failed to register %s\n",
 			rdesc->name);
-		ret = PTR_ERR(rdev);
-		goto anatop_probe_end;
+		return PTR_ERR(rdev);
 	}
 
 	platform_set_drvdata(pdev, rdev);
 
-anatop_probe_end:
-	if (ret)
-		kfree(sreg->name);
-
-	return ret;
-}
-
-static int anatop_regulator_remove(struct platform_device *pdev)
-{
-	struct regulator_dev *rdev = platform_get_drvdata(pdev);
-	struct anatop_regulator *sreg = rdev_get_drvdata(rdev);
-	const char *name = sreg->name;
-
-	kfree(name);
-
 	return 0;
 }
 
@@ -240,7 +222,6 @@ static struct platform_driver anatop_regulator_driver = {
 		.of_match_table = of_anatop_regulator_match_tbl,
 	},
 	.probe	= anatop_regulator_probe,
-	.remove	= anatop_regulator_remove,
 };
 
 static int __init anatop_regulator_init(void)
@@ -259,3 +240,4 @@ MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>");
 MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
 MODULE_DESCRIPTION("ANATOP Regulator driver");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:anatop_regulator");

drivers/regulator/arizona-micsupp.c

@@ -28,8 +28,6 @@
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
 
-#define ARIZONA_MICSUPP_MAX_SELECTOR 0x1f
-
 struct arizona_micsupp {
 	struct regulator_dev *regulator;
 	struct arizona *arizona;
@@ -40,42 +38,6 @@ struct arizona_micsupp {
 	struct work_struct check_cp_work;
 };
 
-static int arizona_micsupp_list_voltage(struct regulator_dev *rdev,
-					unsigned int selector)
-{
-	if (selector > ARIZONA_MICSUPP_MAX_SELECTOR)
-		return -EINVAL;
-
-	if (selector == ARIZONA_MICSUPP_MAX_SELECTOR)
-		return 3300000;
-	else
-		return (selector * 50000) + 1700000;
-}
-
-static int arizona_micsupp_map_voltage(struct regulator_dev *rdev,
-				       int min_uV, int max_uV)
-{
-	unsigned int voltage;
-	int selector;
-
-	if (min_uV < 1700000)
-		min_uV = 1700000;
-
-	if (min_uV > 3200000)
-		selector = ARIZONA_MICSUPP_MAX_SELECTOR;
-	else
-		selector = DIV_ROUND_UP(min_uV - 1700000, 50000);
-
-	if (selector < 0)
-		return -EINVAL;
-
-	voltage = arizona_micsupp_list_voltage(rdev, selector);
-	if (voltage < min_uV || voltage > max_uV)
-		return -EINVAL;
-
-	return selector;
-}
-
 static void arizona_micsupp_check_cp(struct work_struct *work)
 {
 	struct arizona_micsupp *micsupp =
@@ -145,8 +107,8 @@ static struct regulator_ops arizona_micsupp_ops = {
 	.disable = arizona_micsupp_disable,
 	.is_enabled = regulator_is_enabled_regmap,
 
-	.list_voltage = arizona_micsupp_list_voltage,
-	.map_voltage = arizona_micsupp_map_voltage,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
 
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -155,11 +117,16 @@ static struct regulator_ops arizona_micsupp_ops = {
 	.set_bypass = arizona_micsupp_set_bypass,
 };
 
+static const struct regulator_linear_range arizona_micsupp_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1700000, 0,    0x1e, 50000),
+	REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0),
+};
+
 static const struct regulator_desc arizona_micsupp = {
 	.name = "MICVDD",
 	.supply_name = "CPVDD",
 	.type = REGULATOR_VOLTAGE,
-	.n_voltages = ARIZONA_MICSUPP_MAX_SELECTOR + 1,
+	.n_voltages = 32,
 	.ops = &arizona_micsupp_ops,
 
 	.vsel_reg = ARIZONA_LDO2_CONTROL_1,
@@ -169,6 +136,9 @@ static const struct regulator_desc arizona_micsupp = {
 	.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
 	.bypass_mask = ARIZONA_CPMIC_BYPASS,
 
+	.linear_ranges = arizona_micsupp_ranges,
+	.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ranges),
+
 	.enable_time = 3000,
 
 	.owner = THIS_MODULE,

drivers/regulator/as3722-regulator.c

@@ -99,7 +99,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
 		.sleep_ctrl_mask = AS3722_SD0_EXT_ENABLE_MASK,
 		.control_reg = AS3722_SD0_CONTROL_REG,
 		.mode_mask = AS3722_SD0_MODE_FAST,
-		.n_voltages = AS3722_SD0_VSEL_MAX + 1,
 	},
 	{
 		.regulator_id = AS3722_REGULATOR_ID_SD1,
@@ -112,7 +111,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
 		.sleep_ctrl_mask = AS3722_SD1_EXT_ENABLE_MASK,
 		.control_reg = AS3722_SD1_CONTROL_REG,
 		.mode_mask = AS3722_SD1_MODE_FAST,
-		.n_voltages = AS3722_SD0_VSEL_MAX + 1,
 	},
 	{
 		.regulator_id = AS3722_REGULATOR_ID_SD2,
@@ -181,7 +179,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
 		.sleep_ctrl_mask = AS3722_SD6_EXT_ENABLE_MASK,
 		.control_reg = AS3722_SD6_CONTROL_REG,
 		.mode_mask = AS3722_SD6_MODE_FAST,
-		.n_voltages = AS3722_SD0_VSEL_MAX + 1,
 	},
 	{
 		.regulator_id = AS3722_REGULATOR_ID_LDO0,
@@ -595,6 +592,22 @@ static int as3722_sd016_set_current_limit(struct regulator_dev *rdev,
 	return as3722_update_bits(as3722, reg, mask, val);
 }
 
+static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs)
+{
+	int err;
+	unsigned val;
+
+	err = as3722_read(as3722_regs->as3722, AS3722_FUSE7_REG, &val);
+	if (err < 0) {
+		dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n",
+			AS3722_FUSE7_REG, err);
+		return false;
+	}
+	if (val & AS3722_FUSE7_SD0_LOW_VOLTAGE)
+		return true;
+	return false;
+}
+
 static const struct regulator_linear_range as3722_sd2345_ranges[] = {
 	REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500),
 	REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000),
@@ -820,9 +833,19 @@ static int as3722_regulator_probe(struct platform_device *pdev)
 				ops = &as3722_sd016_extcntrl_ops;
 			else
 				ops = &as3722_sd016_ops;
-			as3722_regs->desc[id].min_uV = 610000;
+			if (id == AS3722_REGULATOR_ID_SD0 &&
+			    as3722_sd0_is_low_voltage(as3722_regs)) {
+				as3722_regs->desc[id].n_voltages =
+					AS3722_SD0_VSEL_LOW_VOL_MAX + 1;
+				as3722_regs->desc[id].min_uV = 410000;
+			} else {
+				as3722_regs->desc[id].n_voltages =
+					AS3722_SD0_VSEL_MAX + 1,
+				as3722_regs->desc[id].min_uV = 610000;
+			}
 			as3722_regs->desc[id].uV_step = 10000;
 			as3722_regs->desc[id].linear_min_sel = 1;
+			as3722_regs->desc[id].enable_time = 600;
 			break;
 		case AS3722_REGULATOR_ID_SD2:
 		case AS3722_REGULATOR_ID_SD3:
@@ -842,9 +865,6 @@ static int as3722_regulator_probe(struct platform_device *pdev)
 				ops = &as3722_ldo_extcntrl_ops;
 			else
 				ops = &as3722_ldo_ops;
-			as3722_regs->desc[id].min_uV = 825000;
-			as3722_regs->desc[id].uV_step = 25000;
-			as3722_regs->desc[id].linear_min_sel = 1;
 			as3722_regs->desc[id].enable_time = 500;
 			as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges;
 			as3722_regs->desc[id].n_linear_ranges =

drivers/regulator/core.c

@@ -1334,9 +1334,8 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 	 * If we have return value from dev_lookup fail, we do not expect to
 	 * succeed, so, quit with appropriate error value
 	 */
-	if (ret && ret != -ENODEV) {
+	if (ret && ret != -ENODEV)
 		goto out;
-	}
 
 	if (!devname)
 		devname = "deviceless";
@@ -1351,7 +1350,8 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 
 		rdev = dummy_regulator_rdev;
 		goto found;
-	} else {
+	/* Don't log an error when called from regulator_get_optional() */
+	} else if (!have_full_constraints() || exclusive) {
 		dev_err(dev, "dummy supplies not allowed\n");
 	}
 
@@ -2244,7 +2244,7 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
 		ret = regulator_get_voltage(regulator);
 		if (ret >= 0)
-			return (min_uV <= ret && ret <= max_uV);
+			return min_uV <= ret && ret <= max_uV;
 		else
 			return ret;
 	}
@@ -2416,7 +2416,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 	ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
 	if (ret < 0)
 		goto out;
-	
+
 	/* restore original values in case of error */
 	old_min_uV = regulator->min_uV;
 	old_max_uV = regulator->max_uV;
@@ -2430,7 +2430,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 	ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
 	if (ret < 0)
 		goto out2;
-	
+
 out:
 	mutex_unlock(&rdev->mutex);
 	return ret;
@@ -3835,9 +3835,8 @@ static int __init regulator_init_complete(void)
 			 * goes wrong. */
 			rdev_info(rdev, "disabling\n");
 			ret = ops->disable(rdev);
-			if (ret != 0) {
+			if (ret != 0)
 				rdev_err(rdev, "couldn't disable: %d\n", ret);
-			}
 		} else {
 			/* The intention is that in future we will
 			 * assume that full constraints are provided

drivers/regulator/db8500-prcmu.c

@@ -431,17 +431,11 @@ static int db8500_regulator_register(struct platform_device *pdev,
 	config.of_node = np;
 
 	/* register with the regulator framework */
-	info->rdev = regulator_register(&info->desc, &config);
+	info->rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
 	if (IS_ERR(info->rdev)) {
 		err = PTR_ERR(info->rdev);
 		dev_err(&pdev->dev, "failed to register %s: err %i\n",
 			info->desc.name, err);
-
-		/* if failing, unregister all earlier regulators */
-		while (--id >= 0) {
-			info = &dbx500_regulator_info[id];
-			regulator_unregister(info->rdev);
-		}
 		return err;
 	}
 
@@ -530,20 +524,8 @@ static int db8500_regulator_probe(struct platform_device *pdev)
 
 static int db8500_regulator_remove(struct platform_device *pdev)
 {
-	int i;
-
 	ux500_regulator_debug_exit();
 
-	for (i = 0; i < ARRAY_SIZE(dbx500_regulator_info); i++) {
-		struct dbx500_regulator_info *info;
-		info = &dbx500_regulator_info[i];
-
-		dev_vdbg(rdev_get_dev(info->rdev),
-			"regulator-%s-remove\n", info->desc.name);
-
-		regulator_unregister(info->rdev);
-	}
-
 	return 0;
 }
 

drivers/regulator/gpio-regulator.c

@@ -203,17 +203,18 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
 	}
 	config->nr_states = i;
 
+	config->type = REGULATOR_VOLTAGE;
 	ret = of_property_read_string(np, "regulator-type", &regtype);
-	if (ret < 0) {
-		dev_err(dev, "Missing 'regulator-type' property\n");
-		return ERR_PTR(-EINVAL);
+	if (ret >= 0) {
+		if (!strncmp("voltage", regtype, 7))
+			config->type = REGULATOR_VOLTAGE;
+		else if (!strncmp("current", regtype, 7))
+			config->type = REGULATOR_CURRENT;
+		else
+			dev_warn(dev, "Unknown regulator-type '%s'\n",
+				 regtype);
 	}
 
-	if (!strncmp("voltage", regtype, 7))
-		config->type = REGULATOR_VOLTAGE;
-	else if (!strncmp("current", regtype, 7))
-		config->type = REGULATOR_CURRENT;
-
 	return config;
 }
 

drivers/regulator/lp3971.c

@@ -25,8 +25,6 @@ struct lp3971 {
 	struct device *dev;
 	struct mutex io_lock;
 	struct i2c_client *i2c;
-	int num_regulators;
-	struct regulator_dev **rdev;
 };
 
 static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg);
@@ -383,42 +381,27 @@ static int setup_regulators(struct lp3971 *lp3971,
 {
 	int i, err;
 
-	lp3971->num_regulators = pdata->num_regulators;
-	lp3971->rdev = kcalloc(pdata->num_regulators,
-				sizeof(struct regulator_dev *), GFP_KERNEL);
-	if (!lp3971->rdev) {
-		err = -ENOMEM;
-		goto err_nomem;
-	}
-
 	/* Instantiate the regulators */
 	for (i = 0; i < pdata->num_regulators; i++) {
 		struct regulator_config config = { };
 		struct lp3971_regulator_subdev *reg = &pdata->regulators[i];
+		struct regulator_dev *rdev;
 
 		config.dev = lp3971->dev;
 		config.init_data = reg->initdata;
 		config.driver_data = lp3971;
 
-		lp3971->rdev[i] = regulator_register(&regulators[reg->id],
-						     &config);
-		if (IS_ERR(lp3971->rdev[i])) {
-			err = PTR_ERR(lp3971->rdev[i]);
+		rdev = devm_regulator_register(lp3971->dev,
+					       &regulators[reg->id], &config);
+		if (IS_ERR(rdev)) {
+			err = PTR_ERR(rdev);
 			dev_err(lp3971->dev, "regulator init failed: %d\n",
 				err);
-			goto error;
+			return err;
 		}
 	}
 
 	return 0;
-
-error:
-	while (--i >= 0)
-		regulator_unregister(lp3971->rdev[i]);
-	kfree(lp3971->rdev);
-	lp3971->rdev = NULL;
-err_nomem:
-	return err;
 }
 
 static int lp3971_i2c_probe(struct i2c_client *i2c,
@@ -460,19 +443,6 @@ static int lp3971_i2c_probe(struct i2c_client *i2c,
 	return 0;
 }
 
-static int lp3971_i2c_remove(struct i2c_client *i2c)
-{
-	struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
-	int i;
-
-	for (i = 0; i < lp3971->num_regulators; i++)
-		regulator_unregister(lp3971->rdev[i]);
-
-	kfree(lp3971->rdev);
-
-	return 0;
-}
-
 static const struct i2c_device_id lp3971_i2c_id[] = {
 	{ "lp3971", 0 },
 	{ }
@@ -485,7 +455,6 @@ static struct i2c_driver lp3971_i2c_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe    = lp3971_i2c_probe,
-	.remove   = lp3971_i2c_remove,
 	.id_table = lp3971_i2c_id,
 };
 

drivers/regulator/lp3972.c

@@ -22,8 +22,6 @@ struct lp3972 {
 	struct device *dev;
 	struct mutex io_lock;
 	struct i2c_client *i2c;
-	int num_regulators;
-	struct regulator_dev **rdev;
 };
 
 /* LP3972 Control Registers */
@@ -478,41 +476,27 @@ static int setup_regulators(struct lp3972 *lp3972,
 {
 	int i, err;
 
-	lp3972->num_regulators = pdata->num_regulators;
-	lp3972->rdev = kcalloc(pdata->num_regulators,
-				sizeof(struct regulator_dev *), GFP_KERNEL);
-	if (!lp3972->rdev) {
-		err = -ENOMEM;
-		goto err_nomem;
-	}
-
 	/* Instantiate the regulators */
 	for (i = 0; i < pdata->num_regulators; i++) {
 		struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
 		struct regulator_config config = { };
+		struct regulator_dev *rdev;
 
 		config.dev = lp3972->dev;
 		config.init_data = reg->initdata;
 		config.driver_data = lp3972;
 
-		lp3972->rdev[i] = regulator_register(&regulators[reg->id],
-						     &config);
-		if (IS_ERR(lp3972->rdev[i])) {
-			err = PTR_ERR(lp3972->rdev[i]);
+		rdev = devm_regulator_register(lp3972->dev,
+					       &regulators[reg->id], &config);
+		if (IS_ERR(rdev)) {
+			err = PTR_ERR(rdev);
 			dev_err(lp3972->dev, "regulator init failed: %d\n",
 				err);
-			goto error;
+			return err;
 		}
 	}
 
 	return 0;
-error:
-	while (--i >= 0)
-		regulator_unregister(lp3972->rdev[i]);
-	kfree(lp3972->rdev);
-	lp3972->rdev = NULL;
-err_nomem:
-	return err;
 }
 
 static int lp3972_i2c_probe(struct i2c_client *i2c,
@@ -557,18 +541,6 @@ static int lp3972_i2c_probe(struct i2c_client *i2c,
 	return 0;
 }
 
-static int lp3972_i2c_remove(struct i2c_client *i2c)
-{
-	struct lp3972 *lp3972 = i2c_get_clientdata(i2c);
-	int i;
-
-	for (i = 0; i < lp3972->num_regulators; i++)
-		regulator_unregister(lp3972->rdev[i]);
-	kfree(lp3972->rdev);
-
-	return 0;
-}
-
 static const struct i2c_device_id lp3972_i2c_id[] = {
 	{ "lp3972", 0 },
 	{ }
@@ -581,7 +553,6 @@ static struct i2c_driver lp3972_i2c_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe    = lp3972_i2c_probe,
-	.remove   = lp3972_i2c_remove,
 	.id_table = lp3972_i2c_id,
 };
 

drivers/regulator/max14577.c

+/*
+ * max14577.c - Regulator driver for the Maxim 14577
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/max14577.h>
+#include <linux/mfd/max14577-private.h>
+#include <linux/regulator/of_regulator.h>
+
+struct max14577_regulator {
+	struct device *dev;
+	struct max14577 *max14577;
+	struct regulator_dev **regulators;
+};
+
+static int max14577_reg_is_enabled(struct regulator_dev *rdev)
+{
+	int rid = rdev_get_id(rdev);
+	struct regmap *rmap = rdev->regmap;
+	u8 reg_data;
+
+	switch (rid) {
+	case MAX14577_CHARGER:
+		max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, &reg_data);
+		if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0)
+			return 0;
+		max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+		if ((reg_data & STATUS3_CGMBC_MASK) == 0)
+			return 0;
+		/* MBCHOSTEN and CGMBC are on */
+		return 1;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
+{
+	u8 reg_data;
+	struct regmap *rmap = rdev->regmap;
+
+	if (rdev_get_id(rdev) != MAX14577_CHARGER)
+		return -EINVAL;
+
+	max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL4, &reg_data);
+
+	if ((reg_data & CHGCTRL4_MBCICHWRCL_MASK) == 0)
+		return MAX14577_REGULATOR_CURRENT_LIMIT_MIN;
+
+	reg_data = ((reg_data & CHGCTRL4_MBCICHWRCH_MASK) >>
+			CHGCTRL4_MBCICHWRCH_SHIFT);
+	return MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
+		reg_data * MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP;
+}
+
+static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
+		int min_uA, int max_uA)
+{
+	int i, current_bits = 0xf;
+	u8 reg_data;
+
+	if (rdev_get_id(rdev) != MAX14577_CHARGER)
+		return -EINVAL;
+
+	if (min_uA > MAX14577_REGULATOR_CURRENT_LIMIT_MAX ||
+			max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_MIN)
+		return -EINVAL;
+
+	if (max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START) {
+		/* Less than 200 mA, so set 90mA (turn only Low Bit off) */
+		u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;
+		return max14577_update_reg(rdev->regmap,
+				MAX14577_CHG_REG_CHG_CTRL4,
+				CHGCTRL4_MBCICHWRCL_MASK, reg_data);
+	}
+
+	/* max_uA is in range: <LIMIT_HIGH_START, inifinite>, so search for
+	 * valid current starting from LIMIT_MAX. */
+	for (i = MAX14577_REGULATOR_CURRENT_LIMIT_MAX;
+			i >= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START;
+			i -= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP) {
+		if (i <= max_uA)
+			break;
+		current_bits--;
+	}
+	BUG_ON(current_bits < 0); /* Cannot happen */
+	/* Turn Low Bit on (use range 200mA-950 mA) */
+	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
+	/* and set proper High Bits */
+	reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
+
+	return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
+			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
+			reg_data);
+}
+
+static struct regulator_ops max14577_safeout_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+};
+
+static struct regulator_ops max14577_charger_ops = {
+	.is_enabled		= max14577_reg_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_current_limit	= max14577_reg_get_current_limit,
+	.set_current_limit	= max14577_reg_set_current_limit,
+};
+
+static const struct regulator_desc supported_regulators[] = {
+	[MAX14577_SAFEOUT] = {
+		.name		= "SAFEOUT",
+		.id		= MAX14577_SAFEOUT,
+		.ops		= &max14577_safeout_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+		.n_voltages	= 1,
+		.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
+		.enable_reg	= MAX14577_REG_CONTROL2,
+		.enable_mask	= CTRL2_SFOUTORD_MASK,
+	},
+	[MAX14577_CHARGER] = {
+		.name		= "CHARGER",
+		.id		= MAX14577_CHARGER,
+		.ops		= &max14577_charger_ops,
+		.type		= REGULATOR_CURRENT,
+		.owner		= THIS_MODULE,
+		.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2,
+		.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK,
+	},
+};
+
+#ifdef CONFIG_OF
+static struct of_regulator_match max14577_regulator_matches[] = {
+	{ .name	= "SAFEOUT", },
+	{ .name = "CHARGER", },
+};
+
+static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *np;
+
+	np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
+	if (!np) {
+		dev_err(&pdev->dev, "Failed to get child OF node for regulators\n");
+		return -EINVAL;
+	}
+
+	ret = of_regulator_match(&pdev->dev, np, max14577_regulator_matches,
+			MAX14577_REG_MAX);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static inline struct regulator_init_data *match_init_data(int index)
+{
+	return max14577_regulator_matches[index].init_data;
+}
+
+static inline struct device_node *match_of_node(int index)
+{
+	return max14577_regulator_matches[index].of_node;
+}
+#else /* CONFIG_OF */
+static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev)
+{
+	return 0;
+}
+static inline struct regulator_init_data *match_init_data(int index)
+{
+	return NULL;
+}
+
+static inline struct device_node *match_of_node(int index)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
+
+static int max14577_regulator_probe(struct platform_device *pdev)
+{
+	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
+	struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);
+	int i, ret;
+	struct regulator_config config = {};
+
+	ret = max14577_regulator_dt_parse_pdata(pdev);
+	if (ret)
+		return ret;
+
+	config.dev = &pdev->dev;
+	config.regmap = max14577->regmap;
+
+	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
+		struct regulator_dev *regulator;
+		/*
+		 * Index of supported_regulators[] is also the id and must
+		 * match index of pdata->regulators[].
+		 */
+		if (pdata && pdata->regulators) {
+			config.init_data = pdata->regulators[i].initdata;
+			config.of_node = pdata->regulators[i].of_node;
+		} else {
+			config.init_data = match_init_data(i);
+			config.of_node = match_of_node(i);
+		}
+
+		regulator = devm_regulator_register(&pdev->dev,
+				&supported_regulators[i], &config);
+		if (IS_ERR(regulator)) {
+			ret = PTR_ERR(regulator);
+			dev_err(&pdev->dev,
+					"Regulator init failed for ID %d with error: %d\n",
+					i, ret);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static struct platform_driver max14577_regulator_driver = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "max14577-regulator",
+		   },
+	.probe	= max14577_regulator_probe,
+};
+
+static int __init max14577_regulator_init(void)
+{
+	BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
+			MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
+			MAX14577_REGULATOR_CURRENT_LIMIT_MAX);
+	BUILD_BUG_ON(ARRAY_SIZE(supported_regulators) != MAX14577_REG_MAX);
+
+	return platform_driver_register(&max14577_regulator_driver);
+}
+subsys_initcall(max14577_regulator_init);
+
+static void __exit max14577_regulator_exit(void)
+{
+	platform_driver_unregister(&max14577_regulator_driver);
+}
+module_exit(max14577_regulator_exit);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_DESCRIPTION("MAXIM 14577 regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max14577-regulator");

drivers/regulator/max77693.c

@@ -138,6 +138,7 @@ static struct regulator_ops max77693_charger_ops = {
 	.n_voltages	= 4,					\
 	.ops		= &max77693_safeout_ops,		\
 	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
 	.volt_table	= max77693_safeout_table,		\
 	.vsel_reg	= MAX77693_CHG_REG_SAFEOUT_CTRL,	\
 	.vsel_mask	= SAFEOUT_CTRL_SAFEOUT##_num##_MASK,	\

drivers/regulator/mc13892-regulator.c

@@ -274,25 +274,25 @@ static struct mc13xxx_regulator mc13892_regulators[] = {
 	MC13892_SW_DEFINE(SW4, SWITCHERS3, SWITCHERS3, mc13892_sw),
 	MC13892_FIXED_DEFINE(SWBST, SWITCHERS5, mc13892_swbst),
 	MC13892_FIXED_DEFINE(VIOHI, REGULATORMODE0, mc13892_viohi),
-	MC13892_DEFINE_REGU(VPLL, REGULATORMODE0, REGULATORSETTING0,	\
+	MC13892_DEFINE_REGU(VPLL, REGULATORMODE0, REGULATORSETTING0,
 		mc13892_vpll),
-	MC13892_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0,	\
+	MC13892_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0,
 		mc13892_vdig),
-	MC13892_DEFINE_REGU(VSD, REGULATORMODE1, REGULATORSETTING1,	\
+	MC13892_DEFINE_REGU(VSD, REGULATORMODE1, REGULATORSETTING1,
 		mc13892_vsd),
-	MC13892_DEFINE_REGU(VUSB2, REGULATORMODE0, REGULATORSETTING0,	\
+	MC13892_DEFINE_REGU(VUSB2, REGULATORMODE0, REGULATORSETTING0,
 		mc13892_vusb2),
-	MC13892_DEFINE_REGU(VVIDEO, REGULATORMODE1, REGULATORSETTING1,	\
+	MC13892_DEFINE_REGU(VVIDEO, REGULATORMODE1, REGULATORSETTING1,
 		mc13892_vvideo),
-	MC13892_DEFINE_REGU(VAUDIO, REGULATORMODE1, REGULATORSETTING1,	\
+	MC13892_DEFINE_REGU(VAUDIO, REGULATORMODE1, REGULATORSETTING1,
 		mc13892_vaudio),
-	MC13892_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0,	\
+	MC13892_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0,
 		mc13892_vcam),
-	MC13892_DEFINE_REGU(VGEN1, REGULATORMODE0, REGULATORSETTING0,	\
+	MC13892_DEFINE_REGU(VGEN1, REGULATORMODE0, REGULATORSETTING0,
 		mc13892_vgen1),
-	MC13892_DEFINE_REGU(VGEN2, REGULATORMODE0, REGULATORSETTING0,	\
+	MC13892_DEFINE_REGU(VGEN2, REGULATORMODE0, REGULATORSETTING0,
 		mc13892_vgen2),
-	MC13892_DEFINE_REGU(VGEN3, REGULATORMODE1, REGULATORSETTING0,	\
+	MC13892_DEFINE_REGU(VGEN3, REGULATORMODE1, REGULATORSETTING0,
 		mc13892_vgen3),
 	MC13892_FIXED_DEFINE(VUSB, USB1, mc13892_vusb),
 	MC13892_GPO_DEFINE(GPO1, POWERMISC, mc13892_gpo),
@@ -476,8 +476,8 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
 	}
 
 	mc13xxx_lock(priv->mc13xxx);
-	ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg, mask,
-			      reg_value);
+	ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg,
+			      mask, reg_value);
 	mc13xxx_unlock(priv->mc13xxx);
 
 	return ret;

drivers/regulator/pcf50633-regulator.c

@@ -105,7 +105,7 @@ static int pcf50633_regulator_probe(struct platform_device *pdev)
 
 static struct platform_driver pcf50633_regulator_driver = {
 	.driver = {
-		.name = "pcf50633-regltr",
+		.name = "pcf50633-regulator",
 	},
 	.probe = pcf50633_regulator_probe,
 };

drivers/regulator/pfuze100-regulator.c

@@ -309,21 +309,24 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
 		return ret;
 
 	switch (value & 0x0f) {
-		/* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
-		case 0x8:
-			dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
-		case 0x0:
-			break;
-		default:
-			dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-			return -ENODEV;
+	/*
+	 * Freescale misprogrammed 1-3% of parts prior to week 8 of 2013
+	 * as ID=8
+	 */
+	case 0x8:
+		dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
+	case 0x0:
+		break;
+	default:
+		dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+		return -ENODEV;
 	}
 
 	ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
 	if (ret)
 		return ret;
 	dev_info(pfuze_chip->dev,
-		 "Full lay: %x, Metal lay: %x\n",
+		 "Full layer: %x, Metal layer: %x\n",
 		 (value & 0xf0) >> 4, value & 0x0f);
 
 	ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
@@ -408,31 +411,18 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		config.driver_data = pfuze_chip;
 		config.of_node = match_of_node(i);
 
-		pfuze_chip->regulators[i] = regulator_register(desc, &config);
+		pfuze_chip->regulators[i] =
+			devm_regulator_register(&client->dev, desc, &config);
 		if (IS_ERR(pfuze_chip->regulators[i])) {
 			dev_err(&client->dev, "register regulator%s failed\n",
 				pfuze100_regulators[i].desc.name);
-			ret = PTR_ERR(pfuze_chip->regulators[i]);
-			while (--i >= 0)
-				regulator_unregister(pfuze_chip->regulators[i]);
-			return ret;
+			return PTR_ERR(pfuze_chip->regulators[i]);
 		}
 	}
 
 	return 0;
 }
 
-static int pfuze100_regulator_remove(struct i2c_client *client)
-{
-	int i;
-	struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
-
-	for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
-		regulator_unregister(pfuze_chip->regulators[i]);
-
-	return 0;
-}
-
 static struct i2c_driver pfuze_driver = {
 	.id_table = pfuze_device_id,
 	.driver = {
@@ -441,7 +431,6 @@ static struct i2c_driver pfuze_driver = {
 		.of_match_table = pfuze_dt_ids,
 	},
 	.probe = pfuze100_regulator_probe,
-	.remove = pfuze100_regulator_remove,
 };
 module_i2c_driver(pfuze_driver);
 

drivers/regulator/s2mps11.c

@@ -70,8 +70,6 @@ static int s2mps11_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 		ramp_delay = s2mps11->ramp_delay2;
 		break;
 	case S2MPS11_BUCK3:
-		ramp_delay = s2mps11->ramp_delay34;
-		break;
 	case S2MPS11_BUCK4:
 		ramp_delay = s2mps11->ramp_delay34;
 		break;

drivers/regulator/s5m8767.c

@@ -23,6 +23,7 @@
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
 
 #define S5M8767_OPMODE_NORMAL_MODE 0x1
 
@@ -120,8 +121,8 @@ static const struct sec_voltage_desc *reg_voltage_map[] = {
 	[S5M8767_BUCK4] = &buck_voltage_val2,
 	[S5M8767_BUCK5] = &buck_voltage_val1,
 	[S5M8767_BUCK6] = &buck_voltage_val1,
-	[S5M8767_BUCK7] = NULL,
-	[S5M8767_BUCK8] = NULL,
+	[S5M8767_BUCK7] = &buck_voltage_val3,
+	[S5M8767_BUCK8] = &buck_voltage_val3,
 	[S5M8767_BUCK9] = &buck_voltage_val3,
 };
 
@@ -217,7 +218,7 @@ static int s5m8767_reg_is_enabled(struct regulator_dev *rdev)
 {
 	struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
 	int ret, reg;
-	int mask = 0xc0, enable_ctrl;
+	int enable_ctrl;
 	unsigned int val;
 
 	ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
@@ -226,37 +227,38 @@ static int s5m8767_reg_is_enabled(struct regulator_dev *rdev)
 	else if (ret)
 		return ret;
 
-	ret = sec_reg_read(s5m8767->iodev, reg, &val);
+	ret = regmap_read(s5m8767->iodev->regmap_pmic, reg, &val);
 	if (ret)
 		return ret;
 
-	return (val & mask) == enable_ctrl;
+	return (val & S5M8767_ENCTRL_MASK) == enable_ctrl;
 }
 
 static int s5m8767_reg_enable(struct regulator_dev *rdev)
 {
 	struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
 	int ret, reg;
-	int mask = 0xc0, enable_ctrl;
+	int enable_ctrl;
 
 	ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
 	if (ret)
 		return ret;
 
-	return sec_reg_update(s5m8767->iodev, reg, enable_ctrl, mask);
+	return regmap_update_bits(s5m8767->iodev->regmap_pmic, reg,
+			S5M8767_ENCTRL_MASK, enable_ctrl);
 }
 
 static int s5m8767_reg_disable(struct regulator_dev *rdev)
 {
 	struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
-	int ret, reg;
-	int  mask = 0xc0, enable_ctrl;
+	int ret, reg, enable_ctrl;
 
 	ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
 	if (ret)
 		return ret;
 
-	return sec_reg_update(s5m8767->iodev, reg, ~mask, mask);
+	return regmap_update_bits(s5m8767->iodev->regmap_pmic, reg,
+			S5M8767_ENCTRL_MASK, ~S5M8767_ENCTRL_MASK);
 }
 
 static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
@@ -417,9 +419,12 @@ static struct regulator_ops s5m8767_ops = {
 };
 
 static struct regulator_ops s5m8767_buck78_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
 	.is_enabled		= s5m8767_reg_is_enabled,
 	.enable			= s5m8767_reg_enable,
 	.disable		= s5m8767_reg_disable,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 };
 
 #define s5m8767_regulator_desc(_name) {		\
@@ -745,17 +750,20 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 	buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
 						   pdata->buck2_init);
 
-	sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init);
+	regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK2DVS2,
+			buck_init);
 
 	buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
 						   pdata->buck3_init);
 
-	sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init);
+	regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK3DVS2,
+			buck_init);
 
 	buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
 						   pdata->buck4_init);
 
-	sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init);
+	regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK4DVS2,
+			buck_init);
 
 	for (i = 0; i < 8; i++) {
 		if (s5m8767->buck2_gpiodvs) {
@@ -837,71 +845,76 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 
 	if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
 	   pdata->buck4_gpiodvs) {
-		sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL,
-				(pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1),
-				1 << 1);
-		sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL,
-				(pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1),
-				1 << 1);
-		sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL,
-				(pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1),
-				1 << 1);
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_BUCK2CTRL, 1 << 1,
+				(pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_BUCK3CTRL, 1 << 1,
+				(pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_BUCK4CTRL, 1 << 1,
+				(pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
 	}
 
 	/* Initialize GPIO DVS registers */
 	for (i = 0; i < 8; i++) {
 		if (s5m8767->buck2_gpiodvs) {
-			sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS1 + i,
-					   s5m8767->buck2_vol[i]);
+			regmap_write(s5m8767->iodev->regmap_pmic,
+					S5M8767_REG_BUCK2DVS1 + i,
+					s5m8767->buck2_vol[i]);
 		}
 
 		if (s5m8767->buck3_gpiodvs) {
-			sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS1 + i,
-					   s5m8767->buck3_vol[i]);
+			regmap_write(s5m8767->iodev->regmap_pmic,
+					S5M8767_REG_BUCK3DVS1 + i,
+					s5m8767->buck3_vol[i]);
 		}
 
 		if (s5m8767->buck4_gpiodvs) {
-			sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS1 + i,
-					   s5m8767->buck4_vol[i]);
+			regmap_write(s5m8767->iodev->regmap_pmic,
+					S5M8767_REG_BUCK4DVS1 + i,
+					s5m8767->buck4_vol[i]);
 		}
 	}
 
 	if (s5m8767->buck2_ramp)
-		sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x08, 0x08);
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_DVSRAMP, 0x08, 0x08);
 
 	if (s5m8767->buck3_ramp)
-		sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x04, 0x04);
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_DVSRAMP, 0x04, 0x04);
 
 	if (s5m8767->buck4_ramp)
-		sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x02, 0x02);
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_DVSRAMP, 0x02, 0x02);
 
 	if (s5m8767->buck2_ramp || s5m8767->buck3_ramp
 		|| s5m8767->buck4_ramp) {
+		unsigned int val;
 		switch (s5m8767->ramp_delay) {
 		case 5:
-			sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
-					0x40, 0xf0);
+			val = S5M8767_DVS_BUCK_RAMP_5;
 			break;
 		case 10:
-			sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
-					0x90, 0xf0);
+			val = S5M8767_DVS_BUCK_RAMP_10;
 			break;
 		case 25:
-			sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
-					0xd0, 0xf0);
+			val = S5M8767_DVS_BUCK_RAMP_25;
 			break;
 		case 50:
-			sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
-					0xe0, 0xf0);
+			val = S5M8767_DVS_BUCK_RAMP_50;
 			break;
 		case 100:
-			sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
-					0xf0, 0xf0);
+			val = S5M8767_DVS_BUCK_RAMP_100;
 			break;
 		default:
-			sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
-					0x90, 0xf0);
+			val = S5M8767_DVS_BUCK_RAMP_10;
 		}
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+					S5M8767_REG_DVSRAMP,
+					S5M8767_DVS_BUCK_RAMP_MASK,
+					val << S5M8767_DVS_BUCK_RAMP_SHIFT);
 	}
 
 	for (i = 0; i < pdata->num_regulators; i++) {

drivers/regulator/stw481x-vmmc.c

@@ -74,7 +74,8 @@ static int stw481x_vmmc_regulator_probe(struct platform_device *pdev)
 	config.init_data = of_get_regulator_init_data(&pdev->dev,
 						      pdev->dev.of_node);
 
-	stw481x->vmmc_regulator = regulator_register(&vmmc_regulator, &config);
+	stw481x->vmmc_regulator = devm_regulator_register(&pdev->dev,
+						&vmmc_regulator, &config);
 	if (IS_ERR(stw481x->vmmc_regulator)) {
 		dev_err(&pdev->dev,
 			"error initializing STw481x VMMC regulator\n");
@@ -85,14 +86,6 @@ static int stw481x_vmmc_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int stw481x_vmmc_regulator_remove(struct platform_device *pdev)
-{
-	struct stw481x *stw481x = dev_get_platdata(&pdev->dev);
-
-	regulator_unregister(stw481x->vmmc_regulator);
-	return 0;
-}
-
 static const struct of_device_id stw481x_vmmc_match[] = {
 	{ .compatible = "st,stw481x-vmmc", },
 	{},
@@ -105,7 +98,6 @@ static struct platform_driver stw481x_vmmc_regulator_driver = {
 		.of_match_table = stw481x_vmmc_match,
 	},
 	.probe = stw481x_vmmc_regulator_probe,
-	.remove = stw481x_vmmc_regulator_remove,
 };
 
 module_platform_driver(stw481x_vmmc_regulator_driver);

drivers/regulator/tps51632-regulator.c

@@ -70,16 +70,16 @@
 #define TPS51632_POWER_STATE_SINGLE_PHASE_CCM	0x1
 #define TPS51632_POWER_STATE_SINGLE_PHASE_DCM	0x2
 
-#define TPS51632_MIN_VOLATGE			500000
-#define TPS51632_MAX_VOLATGE			1520000
-#define TPS51632_VOLATGE_STEP_10mV		10000
-#define TPS51632_VOLATGE_STEP_20mV		20000
+#define TPS51632_MIN_VOLTAGE			500000
+#define TPS51632_MAX_VOLTAGE			1520000
+#define TPS51632_VOLTAGE_STEP_10mV		10000
+#define TPS51632_VOLTAGE_STEP_20mV		20000
 #define TPS51632_MAX_VSEL			0x7F
 #define TPS51632_MIN_VSEL			0x19
 #define TPS51632_DEFAULT_RAMP_DELAY		6000
 #define TPS51632_VOLT_VSEL(uV)					\
-		(DIV_ROUND_UP(uV - TPS51632_MIN_VOLATGE,	\
-			TPS51632_VOLATGE_STEP_10mV) +		\
+		(DIV_ROUND_UP(uV - TPS51632_MIN_VOLTAGE,	\
+			TPS51632_VOLTAGE_STEP_10mV) +		\
 			TPS51632_MIN_VSEL)
 
 /* TPS51632 chip information */
@@ -243,9 +243,9 @@ static struct tps51632_regulator_platform_data *
 	pdata->dvfs_step_20mV = of_property_read_bool(np, "ti,dvfs-step-20mV");
 
 	pdata->base_voltage_uV = pdata->reg_init_data->constraints.min_uV ? :
-					TPS51632_MIN_VOLATGE;
+					TPS51632_MIN_VOLTAGE;
 	pdata->max_voltage_uV = pdata->reg_init_data->constraints.max_uV ? :
-					TPS51632_MAX_VOLATGE;
+					TPS51632_MAX_VOLTAGE;
 	return pdata;
 }
 #else
@@ -284,15 +284,15 @@ static int tps51632_probe(struct i2c_client *client,
 	}
 
 	if (pdata->enable_pwm_dvfs) {
-		if ((pdata->base_voltage_uV < TPS51632_MIN_VOLATGE) ||
-		    (pdata->base_voltage_uV > TPS51632_MAX_VOLATGE)) {
+		if ((pdata->base_voltage_uV < TPS51632_MIN_VOLTAGE) ||
+		    (pdata->base_voltage_uV > TPS51632_MAX_VOLTAGE)) {
 			dev_err(&client->dev, "Invalid base_voltage_uV setting\n");
 			return -EINVAL;
 		}
 
 		if ((pdata->max_voltage_uV) &&
-		    ((pdata->max_voltage_uV < TPS51632_MIN_VOLATGE) ||
-		     (pdata->max_voltage_uV > TPS51632_MAX_VOLATGE))) {
+		    ((pdata->max_voltage_uV < TPS51632_MIN_VOLTAGE) ||
+		     (pdata->max_voltage_uV > TPS51632_MAX_VOLTAGE))) {
 			dev_err(&client->dev, "Invalid max_voltage_uV setting\n");
 			return -EINVAL;
 		}
@@ -305,11 +305,11 @@ static int tps51632_probe(struct i2c_client *client,
 	}
 
 	tps->dev = &client->dev;
-	tps->desc.name = id->name;
+	tps->desc.name = client->name;
 	tps->desc.id = 0;
 	tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
-	tps->desc.min_uV = TPS51632_MIN_VOLATGE;
-	tps->desc.uV_step = TPS51632_VOLATGE_STEP_10mV;
+	tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
+	tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
 	tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
 	tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
 	tps->desc.ops = &tps51632_dcdc_ops;

drivers/regulator/tps62360-regulator.c

@@ -360,7 +360,7 @@ static int tps62360_probe(struct i2c_client *client,
 			dev_err(&client->dev, "Error: No device match found\n");
 			return -ENODEV;
 		}
-		chip_id = (int)match->data;
+		chip_id = (int)(long)match->data;
 		if (!pdata)
 			pdata = of_get_tps62360_platform_data(&client->dev);
 	} else if (id) {

drivers/regulator/tps65910-regulator.c

@@ -88,6 +88,11 @@ static const unsigned int VMMC_VSEL_table[] = {
 	1800000, 2800000, 3000000, 3300000,
 };
 
+/* supported BBCH voltages in microvolts */
+static const unsigned int VBB_VSEL_table[] = {
+	3000000, 2520000, 3150000, 5000000,
+};
+
 struct tps_info {
 	const char *name;
 	const char *vin_name;
@@ -183,6 +188,12 @@ static struct tps_info tps65910_regs[] = {
 		.voltage_table = VMMC_VSEL_table,
 		.enable_time_us = 100,
 	},
+	{
+		.name = "vbb",
+		.vin_name = "vcc7",
+		.n_voltages = ARRAY_SIZE(VBB_VSEL_table),
+		.voltage_table = VBB_VSEL_table,
+	},
 };
 
 static struct tps_info tps65911_regs[] = {
@@ -339,6 +350,8 @@ static int tps65910_get_ctrl_register(int id)
 		return TPS65910_VAUX33;
 	case TPS65910_REG_VMMC:
 		return TPS65910_VMMC;
+	case TPS65910_REG_VBB:
+		return TPS65910_BBCH;
 	default:
 		return -EINVAL;
 	}
@@ -528,6 +541,10 @@ static int tps65910_get_voltage_sel(struct regulator_dev *dev)
 		value &= LDO_SEL_MASK;
 		value >>= LDO_SEL_SHIFT;
 		break;
+	case TPS65910_REG_VBB:
+		value &= BBCH_BBSEL_MASK;
+		value >>= BBCH_BBSEL_SHIFT;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -638,6 +655,9 @@ static int tps65910_set_voltage_sel(struct regulator_dev *dev,
 	case TPS65910_REG_VMMC:
 		return tps65910_reg_update_bits(pmic->mfd, reg, LDO_SEL_MASK,
 						selector << LDO_SEL_SHIFT);
+	case TPS65910_REG_VBB:
+		return tps65910_reg_update_bits(pmic->mfd, reg, BBCH_BBSEL_MASK,
+						selector << BBCH_BBSEL_SHIFT);
 	}
 
 	return -EINVAL;
@@ -669,6 +689,9 @@ static int tps65911_set_voltage_sel(struct regulator_dev *dev,
 	case TPS65910_REG_VIO:
 		return tps65910_reg_update_bits(pmic->mfd, reg, LDO_SEL_MASK,
 						selector << LDO_SEL_SHIFT);
+	case TPS65910_REG_VBB:
+		return tps65910_reg_update_bits(pmic->mfd, reg, BBCH_BBSEL_MASK,
+						selector << BBCH_BBSEL_SHIFT);
 	}
 
 	return -EINVAL;
@@ -762,6 +785,18 @@ static struct regulator_ops tps65910_ops_vdd3 = {
 	.map_voltage		= regulator_map_voltage_ascend,
 };
 
+static struct regulator_ops tps65910_ops_vbb = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.set_mode		= tps65910_set_mode,
+	.get_mode		= tps65910_get_mode,
+	.get_voltage_sel	= tps65910_get_voltage_sel,
+	.set_voltage_sel	= tps65910_set_voltage_sel,
+	.list_voltage		= regulator_list_voltage_table,
+	.map_voltage		= regulator_map_voltage_iterate,
+};
+
 static struct regulator_ops tps65910_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
@@ -944,6 +979,7 @@ static struct of_regulator_match tps65910_matches[] = {
 	{ .name = "vaux2",	.driver_data = (void *) &tps65910_regs[10] },
 	{ .name = "vaux33",	.driver_data = (void *) &tps65910_regs[11] },
 	{ .name = "vmmc",	.driver_data = (void *) &tps65910_regs[12] },
+	{ .name = "vbb",	.driver_data = (void *) &tps65910_regs[13] },
 };
 
 static struct of_regulator_match tps65911_matches[] = {
@@ -1145,6 +1181,10 @@ static int tps65910_probe(struct platform_device *pdev)
 				pmic->desc[i].ops = &tps65910_ops_dcdc;
 				pmic->desc[i].ramp_delay = 5000;
 			}
+		} else if (i == TPS65910_REG_VBB &&
+				tps65910_chip_id(tps65910) == TPS65910) {
+			pmic->desc[i].ops = &tps65910_ops_vbb;
+			pmic->desc[i].volt_table = info->voltage_table;
 		} else {
 			if (tps65910_chip_id(tps65910) == TPS65910) {
 				pmic->desc[i].ops = &tps65910_ops;

drivers/regulator/twl-regulator.c

@@ -58,7 +58,7 @@ struct twlreg_info {
 	struct regulator_desc	desc;
 
 	/* chip specific features */
-	unsigned long 		features;
+	unsigned long		features;
 
 	/*
 	 * optional override functions for voltage set/get
@@ -1128,7 +1128,7 @@ static int twlreg_probe(struct platform_device *pdev)
 	if (!initdata)
 		return -EINVAL;
 
-	info = kmemdup(template, sizeof (*info), GFP_KERNEL);
+	info = kmemdup(template, sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 

drivers/regulator/wm831x-dcdc.c

@@ -762,8 +762,7 @@ static int wm831x_boostp_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_REG, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "No REG resource\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 	dcdc->base = res->start;
 
@@ -788,7 +787,7 @@ static int wm831x_boostp_probe(struct platform_device *pdev)
 		ret = PTR_ERR(dcdc->regulator);
 		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
 			id + 1, ret);
-		goto err;
+		return ret;
 	}
 
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
@@ -799,15 +798,12 @@ static int wm831x_boostp_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
-		goto err;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, dcdc);
 
 	return 0;
-
-err:
-	return ret;
 }
 
 static struct platform_driver wm831x_boostp_driver = {

include/linux/mfd/as3722.h

@@ -151,6 +151,7 @@
 #define AS3722_ASIC_ID1_REG				0x90
 #define AS3722_ASIC_ID2_REG				0x91
 #define AS3722_LOCK_REG					0x9E
+#define AS3722_FUSE7_REG				0xA7
 #define AS3722_MAX_REGISTER				0xF4
 
 #define AS3722_SD0_EXT_ENABLE_MASK			0x03
@@ -224,6 +225,7 @@
 #define AS3722_SD_VSEL_MASK				0x7F
 #define AS3722_SD0_VSEL_MIN				0x01
 #define AS3722_SD0_VSEL_MAX				0x5A
+#define AS3722_SD0_VSEL_LOW_VOL_MAX			0x6E
 #define AS3722_SD2_VSEL_MIN				0x01
 #define AS3722_SD2_VSEL_MAX				0x7F
 
@@ -342,6 +344,8 @@
 #define AS3722_EXT_CONTROL_ENABLE2			0x2
 #define AS3722_EXT_CONTROL_ENABLE3			0x3
 
+#define AS3722_FUSE7_SD0_LOW_VOLTAGE			BIT(4)
+
 /* Interrupt IDs */
 enum as3722_irq {
 	AS3722_IRQ_LID,

include/linux/mfd/samsung/core.h

@@ -59,12 +59,6 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic);
 void sec_irq_exit(struct sec_pmic_dev *sec_pmic);
 int sec_irq_resume(struct sec_pmic_dev *sec_pmic);
 
-extern int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest);
-extern int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf);
-extern int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value);
-extern int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf);
-extern int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask);
-
 struct sec_platform_data {
 	struct sec_regulator_data	*regulators;
 	struct sec_opmode_data		*opmode;

include/linux/mfd/samsung/s5m8767.h

@@ -183,6 +183,22 @@ enum s5m8767_regulators {
 	S5M8767_REG_MAX,
 };
 
-#define S5M8767_ENCTRL_SHIFT  6
+#define S5M8767_ENCTRL_SHIFT		6
+#define S5M8767_ENCTRL_MASK		(0x3 << S5M8767_ENCTRL_SHIFT)
+
+/*
+ * Values for BUCK_RAMP field in DVS_RAMP register, matching raw values
+ * in mV/us.
+ */
+enum s5m8767_dvs_buck_ramp_values {
+	S5M8767_DVS_BUCK_RAMP_5		= 0x4,
+	S5M8767_DVS_BUCK_RAMP_10	= 0x9,
+	S5M8767_DVS_BUCK_RAMP_12_5	= 0xb,
+	S5M8767_DVS_BUCK_RAMP_25	= 0xd,
+	S5M8767_DVS_BUCK_RAMP_50	= 0xe,
+	S5M8767_DVS_BUCK_RAMP_100	= 0xf,
+};
+#define S5M8767_DVS_BUCK_RAMP_SHIFT	4
+#define S5M8767_DVS_BUCK_RAMP_MASK	(0xf << S5M8767_DVS_BUCK_RAMP_SHIFT)
 
 #endif /* __LINUX_MFD_S5M8767_H */

include/linux/mfd/tps65910.h

@@ -358,8 +358,6 @@
 /*Register BBCH  (0x80) register.RegisterDescription */
 #define BBCH_BBSEL_MASK					0x06
 #define BBCH_BBSEL_SHIFT				1
-#define BBCH_BBCHEN_MASK				0x01
-#define BBCH_BBCHEN_SHIFT				0
 
 
 /*Register DCDCCTRL  (0x80) register.RegisterDescription */
@@ -833,6 +831,7 @@
 #define TPS65910_REG_VAUX2				10
 #define TPS65910_REG_VAUX33				11
 #define TPS65910_REG_VMMC				12
+#define TPS65910_REG_VBB				13
 
 #define TPS65911_REG_VDDCTRL				4
 #define TPS65911_REG_LDO1				5
@@ -845,7 +844,7 @@
 #define TPS65911_REG_LDO8				12
 
 /* Max number of TPS65910/11 regulators */
-#define TPS65910_NUM_REGS				13
+#define TPS65910_NUM_REGS				14
 
 /* External sleep controls through EN1/EN2/EN3/SLEEP inputs */
 #define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN1		0x1

include/linux/regulator/act8865.h

+/*
+ * act8865.h  --  Voltage regulation for the active-semi act8865
+ *
+ * Copyright (C) 2013 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_ACT8865_H
+#define __LINUX_REGULATOR_ACT8865_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+	ACT8865_ID_DCDC1,
+	ACT8865_ID_DCDC2,
+	ACT8865_ID_DCDC3,
+	ACT8865_ID_LDO1,
+	ACT8865_ID_LDO2,
+	ACT8865_ID_LDO3,
+	ACT8865_ID_LDO4,
+	ACT8865_REG_NUM,
+};
+
+/**
+ * act8865_regulator_data - regulator data
+ * @id: regulator id
+ * @name: regulator name
+ * @platform_data: regulator init data
+ */
+struct act8865_regulator_data {
+	int id;
+	const char *name;
+	struct regulator_init_data *platform_data;
+};
+
+/**
+ * act8865_platform_data - platform data for act8865
+ * @num_regulators: number of regulators used
+ * @regulators: pointer to regulators used
+ */
+struct act8865_platform_data {
+	int num_regulators;
+	struct act8865_regulator_data *regulators;
+};
+#endif