Commit 15367f10 authored by Liam Breck's avatar Liam Breck Committed by Ben Hutchings

power: supply: bq24190_charger: Handle fault before status on interrupt

commit ba52e757 upstream.

Reading both fault and status registers and logging any fault should
take priority over handling status register update.

Fix by moving the status handling to later in interrupt routine.

Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: default avatarLiam Breck <kernel@networkimprov.net>
Acked-by: default avatarMark Greer <mgreer@animalcreek.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarSebastian Reichel <sre@kernel.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent 57ab80e6
......@@ -1185,29 +1185,6 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
goto out;
}
if (ss_reg != bdi->ss_reg) {
/*
* The device is in host mode so when PG_STAT goes from 1->0
* (i.e., power removed) HIZ needs to be disabled.
*/
if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
BQ24190_REG_ISC_EN_HIZ_MASK,
BQ24190_REG_ISC_EN_HIZ_SHIFT,
0);
if (ret < 0)
dev_err(bdi->dev, "Can't access ISC reg: %d\n",
ret);
}
if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
alert_battery = true;
if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
alert_charger = true;
bdi->ss_reg = ss_reg;
}
i = 0;
do {
ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
......@@ -1234,6 +1211,29 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
mutex_unlock(&bdi->f_reg_lock);
}
if (ss_reg != bdi->ss_reg) {
/*
* The device is in host mode so when PG_STAT goes from 1->0
* (i.e., power removed) HIZ needs to be disabled.
*/
if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
BQ24190_REG_ISC_EN_HIZ_MASK,
BQ24190_REG_ISC_EN_HIZ_SHIFT,
0);
if (ret < 0)
dev_err(bdi->dev, "Can't access ISC reg: %d\n",
ret);
}
if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
alert_battery = true;
if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
alert_charger = true;
bdi->ss_reg = ss_reg;
}
if (alert_charger)
power_supply_changed(&bdi->charger);
if (alert_battery)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment