power: supply: bq24190_charger: Handle fault before status on interrupt

commit ba52e757 upstream.

Reading both fault and status registers and logging any fault should
take priority over handling status register update.

Fix by moving the status handling to later in interrupt routine.

Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drivers/power/bq24190_charger.c

@@ -1185,29 +1185,6 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
 		goto out;
 	}
 
-	if (ss_reg != bdi->ss_reg) {
-		/*
-		 * The device is in host mode so when PG_STAT goes from 1->0
-		 * (i.e., power removed) HIZ needs to be disabled.
-		 */
-		if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
-				!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
-			ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
-					BQ24190_REG_ISC_EN_HIZ_MASK,
-					BQ24190_REG_ISC_EN_HIZ_SHIFT,
-					0);
-			if (ret < 0)
-				dev_err(bdi->dev, "Can't access ISC reg: %d\n",
-					ret);
-		}
-
-		if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
-			alert_battery = true;
-		if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
-			alert_charger = true;
-		bdi->ss_reg = ss_reg;
-	}
-
 	i = 0;
 	do {
 		ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
@@ -1234,6 +1211,29 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
 		mutex_unlock(&bdi->f_reg_lock);
 	}
 
+	if (ss_reg != bdi->ss_reg) {
+		/*
+		 * The device is in host mode so when PG_STAT goes from 1->0
+		 * (i.e., power removed) HIZ needs to be disabled.
+		 */
+		if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
+				!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
+			ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
+					BQ24190_REG_ISC_EN_HIZ_MASK,
+					BQ24190_REG_ISC_EN_HIZ_SHIFT,
+					0);
+			if (ret < 0)
+				dev_err(bdi->dev, "Can't access ISC reg: %d\n",
+					ret);
+		}
+
+		if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
+			alert_battery = true;
+		if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
+			alert_charger = true;
+		bdi->ss_reg = ss_reg;
+	}
+
 	if (alert_charger)
 		power_supply_changed(&bdi->charger);
 	if (alert_battery)